brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-09-18 10:44:13 +09:00
Code Issues Projects Releases Wiki Activity
3195840c94
u-boot-brain/arch/arm/mach-imx/mxs/Kconfig

62 lines
839 B
Plaintext
Raw Normal View History

arm: imx: mx23: Move MX23 selection to Kconfig The motivation for moving MX23 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-06 17:44:34 +09:00
if ARCH_MX23
config MX23
bool
default y
choice
prompt "MX23 board select"
optional
config TARGET_MX23_OLINUXINO
bool "Support mx23_olinuxino"
select BOARD_EARLY_INIT_F
config TARGET_MX23EVK
bool "Support mx23evk"
select BOARD_EARLY_INIT_F
config TARGET_XFI3
bool "Support xfi3"
endchoice
config SYS_SOC
default "mxs"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/freescale/mx23evk/Kconfig"
endif
arm: imx: mx28: Move MX28 selection to Kconfig The motivation for moving MX28 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-06 17:44:35 +09:00
if ARCH_MX28
config MX28
bool
default y
choice
prompt "MX28 board select"
optional
config TARGET_BG0900
bool "Support bg0900"
config TARGET_MX28EVK
bool "Support mx28evk"
select BOARD_EARLY_INIT_F
imx: Add support for i.MX28 based XEA board This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-12-09 06:06:56 +09:00
config TARGET_XEA
bool "Support XEA"
arm: imx: mx28: Move MX28 selection to Kconfig The motivation for moving MX28 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-06 17:44:35 +09:00
endchoice
config SYS_SOC
default "mxs"
source "board/freescale/mx28evk/Kconfig"
imx: Add support for i.MX28 based XEA board This patch introduces support for i.MX28 based XEA board. This board supports DM/DTS in U-Boot proper as well as DM aware drivers in SPL (u-boot.sb) by using OF_PLATDATA. More detailed information regarding usage of it can be found in ./board/liebherr/xea/README file. U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) Trying to boot from MMC1 MMC0: Command 8 timeout (status 0xf0344020) mmc_load_image_raw_sector: mmc block read error U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200) CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SPI #3, master, 3V3 NOR Model: Liebherr (LWE) XEA i.MX28 Board DRAM: 128 MiB MMC: MXS MMC: 0 Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2 eth0: ethernet@800f0000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-12-09 06:06:56 +09:00
source "board/liebherr/xea/Kconfig"
arm: imx: mx28: Move MX28 selection to Kconfig The motivation for moving MX28 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-06 17:44:35 +09:00
source "board/ppcag/bg0900/Kconfig"
endif
Reference in New Issue Copy Permalink