2006-10-10 19:36:02 +09:00
|
|
|
/*
|
2007-12-30 11:30:46 +09:00
|
|
|
* drivers/mtd/nand/nand_util.c
|
2006-10-10 19:36:02 +09:00
|
|
|
*
|
|
|
|
* Copyright (C) 2006 by Weiss-Electronic GmbH.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* @author: Guido Classen <clagix@gmail.com>
|
|
|
|
* @descr: NAND Flash support
|
|
|
|
* @references: borrowed heavily from Linux mtd-utils code:
|
|
|
|
* flash_eraseall.c by Arcom Control System Ltd
|
|
|
|
* nandwrite.c by Steven J. Hill (sjhill@realitydiluted.com)
|
|
|
|
* and Thomas Gleixner (tglx@linutronix.de)
|
|
|
|
*
|
2011-06-15 05:35:06 +09:00
|
|
|
* Copyright (C) 2008 Nokia Corporation: drop_ffs() function by
|
|
|
|
* Artem Bityutskiy <dedekind1@gmail.com> from mtd-utils
|
|
|
|
*
|
2006-10-10 19:36:02 +09:00
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
* project.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License version
|
|
|
|
* 2 as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
*
|
2010-07-31 06:11:41 +09:00
|
|
|
* Copyright 2010 Freescale Semiconductor
|
|
|
|
* The portions of this file whose copyright is held by Freescale and which
|
|
|
|
* are not considered a derived work of GPL v2-only code may be distributed
|
|
|
|
* and/or modified under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
|
|
* License, or (at your option) any later version.
|
2006-10-10 19:36:02 +09:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#include <command.h>
|
|
|
|
#include <watchdog.h>
|
|
|
|
#include <malloc.h>
|
2007-08-03 00:42:08 +09:00
|
|
|
#include <div64.h>
|
2006-10-10 19:36:02 +09:00
|
|
|
|
2007-10-31 21:53:06 +09:00
|
|
|
#include <asm/errno.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
2006-10-10 19:36:02 +09:00
|
|
|
#include <nand.h>
|
|
|
|
#include <jffs2/jffs2.h>
|
|
|
|
|
|
|
|
typedef struct erase_info erase_info_t;
|
|
|
|
typedef struct mtd_info mtd_info_t;
|
|
|
|
|
|
|
|
/* support only for native endian JFFS2 */
|
|
|
|
#define cpu_to_je16(x) (x)
|
|
|
|
#define cpu_to_je32(x) (x)
|
|
|
|
|
|
|
|
/**
|
|
|
|
* nand_erase_opts: - erase NAND flash with support for various options
|
|
|
|
* (jffs2 formating)
|
|
|
|
*
|
|
|
|
* @param meminfo NAND device to erase
|
|
|
|
* @param opts options, @see struct nand_erase_options
|
|
|
|
* @return 0 in case of success
|
|
|
|
*
|
|
|
|
* This code is ported from flash_eraseall.c from Linux mtd utils by
|
|
|
|
* Arcom Control System Ltd.
|
|
|
|
*/
|
|
|
|
int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
|
|
|
|
{
|
|
|
|
struct jffs2_unknown_node cleanmarker;
|
|
|
|
erase_info_t erase;
|
nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased. This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.
Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.
While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition. To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand. This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.
While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-26 04:43:29 +09:00
|
|
|
unsigned long erase_length, erased_length; /* in blocks */
|
2006-10-10 19:36:02 +09:00
|
|
|
int bbtest = 1;
|
|
|
|
int result;
|
|
|
|
int percent_complete = -1;
|
|
|
|
const char *mtd_device = meminfo->name;
|
2007-10-31 21:53:06 +09:00
|
|
|
struct mtd_oob_ops oob_opts;
|
|
|
|
struct nand_chip *chip = meminfo->priv;
|
2006-10-10 19:36:02 +09:00
|
|
|
|
nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased. This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.
Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.
While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition. To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand. This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.
While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-26 04:43:29 +09:00
|
|
|
if ((opts->offset & (meminfo->writesize - 1)) != 0) {
|
|
|
|
printf("Attempt to erase non page aligned data\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2006-10-10 19:36:02 +09:00
|
|
|
memset(&erase, 0, sizeof(erase));
|
2007-10-31 21:53:06 +09:00
|
|
|
memset(&oob_opts, 0, sizeof(oob_opts));
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
erase.mtd = meminfo;
|
|
|
|
erase.len = meminfo->erasesize;
|
2006-10-28 22:55:52 +09:00
|
|
|
erase.addr = opts->offset;
|
nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased. This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.
Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.
While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition. To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand. This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.
While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-26 04:43:29 +09:00
|
|
|
erase_length = lldiv(opts->length + meminfo->erasesize - 1,
|
|
|
|
meminfo->erasesize);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
2007-10-31 21:53:06 +09:00
|
|
|
cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
|
|
|
|
cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
|
|
|
|
cleanmarker.totlen = cpu_to_je32(8);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* scrub option allows to erase badblock. To prevent internal
|
|
|
|
* check from erase() method, set block check method to dummy
|
|
|
|
* and disable bad block table while erasing.
|
|
|
|
*/
|
|
|
|
if (opts->scrub) {
|
2011-09-12 13:04:06 +09:00
|
|
|
erase.scrub = opts->scrub;
|
|
|
|
/*
|
|
|
|
* We don't need the bad block table anymore...
|
2006-10-10 19:36:02 +09:00
|
|
|
* after scrub, there are no bad blocks left!
|
|
|
|
*/
|
2011-09-12 13:04:06 +09:00
|
|
|
if (chip->bbt) {
|
|
|
|
kfree(chip->bbt);
|
2006-10-10 19:36:02 +09:00
|
|
|
}
|
2011-09-12 13:04:06 +09:00
|
|
|
chip->bbt = NULL;
|
2006-10-10 19:36:02 +09:00
|
|
|
}
|
|
|
|
|
nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased. This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.
Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.
While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition. To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand. This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.
While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-26 04:43:29 +09:00
|
|
|
for (erased_length = 0;
|
|
|
|
erased_length < erase_length;
|
2006-10-10 19:36:02 +09:00
|
|
|
erase.addr += meminfo->erasesize) {
|
2007-11-08 18:39:53 +09:00
|
|
|
|
2006-10-10 19:36:02 +09:00
|
|
|
WATCHDOG_RESET ();
|
|
|
|
|
|
|
|
if (!opts->scrub && bbtest) {
|
|
|
|
int ret = meminfo->block_isbad(meminfo, erase.addr);
|
|
|
|
if (ret > 0) {
|
|
|
|
if (!opts->quiet)
|
|
|
|
printf("\rSkipping bad block at "
|
2009-05-11 23:03:55 +09:00
|
|
|
"0x%08llx "
|
2006-10-12 18:43:47 +09:00
|
|
|
" \n",
|
|
|
|
erase.addr);
|
nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased. This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.
Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.
While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition. To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand. This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.
While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-26 04:43:29 +09:00
|
|
|
|
|
|
|
if (!opts->spread)
|
|
|
|
erased_length++;
|
|
|
|
|
2006-10-10 19:36:02 +09:00
|
|
|
continue;
|
|
|
|
|
|
|
|
} else if (ret < 0) {
|
|
|
|
printf("\n%s: MTD get bad block failed: %d\n",
|
|
|
|
mtd_device,
|
|
|
|
ret);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased. This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.
Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.
While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition. To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand. This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.
While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-26 04:43:29 +09:00
|
|
|
erased_length++;
|
|
|
|
|
2006-10-10 19:36:02 +09:00
|
|
|
result = meminfo->erase(meminfo, &erase);
|
|
|
|
if (result != 0) {
|
|
|
|
printf("\n%s: MTD Erase failure: %d\n",
|
|
|
|
mtd_device, result);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* format for JFFS2 ? */
|
2008-10-30 04:20:26 +09:00
|
|
|
if (opts->jffs2 && chip->ecc.layout->oobavail >= 8) {
|
|
|
|
chip->ops.ooblen = 8;
|
2007-10-31 21:53:06 +09:00
|
|
|
chip->ops.datbuf = NULL;
|
2008-10-30 04:20:26 +09:00
|
|
|
chip->ops.oobbuf = (uint8_t *)&cleanmarker;
|
|
|
|
chip->ops.ooboffs = 0;
|
|
|
|
chip->ops.mode = MTD_OOB_AUTO;
|
2007-11-08 18:39:53 +09:00
|
|
|
|
2007-10-31 21:53:06 +09:00
|
|
|
result = meminfo->write_oob(meminfo,
|
2008-10-30 04:20:26 +09:00
|
|
|
erase.addr,
|
|
|
|
&chip->ops);
|
2007-10-31 21:53:06 +09:00
|
|
|
if (result != 0) {
|
|
|
|
printf("\n%s: MTD writeoob failure: %d\n",
|
2008-10-30 04:20:26 +09:00
|
|
|
mtd_device, result);
|
2007-10-31 21:53:06 +09:00
|
|
|
continue;
|
2006-10-10 19:36:02 +09:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!opts->quiet) {
|
nand erase: .spread, .part, .chip subcommands
A while back, in http://lists.denx.de/pipermail/u-boot/2009-June/054428.html,
Michele De Candia posted a patch to not count bad blocks toward the
requested size to be erased. This is desireable when you're passing in
something like $filesize, but not when you're trying to erase a partition.
Thus, a .spread subcommand (named for consistency with
http://lists.denx.de/pipermail/u-boot/2010-August/075163.html) is introduced
to make explicit the user's desire to erase for a given amount of data,
rather than to erase a specific region of the chip.
While passing $filesize to "nand erase" is useful, accidentally passing
something like $fliesize currently produces quite unpleasant results, as the
variable evaluates to nothing and U-Boot assumes that you want to erase
the entire rest of the chip/partition. To improve the safety of the
erase command, require the user to make explicit their intentions by
using a .part or .chip subcommand. This is an incompatible user interface
change, but keeping compatibility would eliminate the safety gain, and IMHO
it's worth it.
While touching nand_erase_opts(), make it accept 64-bit offsets and sizes,
fix the percentage display when erase length is rounded up, eliminate
an inconsistent warning about rounding up the erase length which only
happened when the length was less than one block (rounding up for $filesize
is normal operation), and add a diagnostic if there's an attempt to erase
beginning at a non-block boundary.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
2010-08-26 04:43:29 +09:00
|
|
|
unsigned long long n = erased_length * 100ULL;
|
2007-09-12 00:04:00 +09:00
|
|
|
int percent;
|
|
|
|
|
|
|
|
do_div(n, erase_length);
|
|
|
|
percent = (int)n;
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* output progress message only at whole percent
|
|
|
|
* steps to reduce the number of messages printed
|
|
|
|
* on (slow) serial consoles
|
|
|
|
*/
|
|
|
|
if (percent != percent_complete) {
|
|
|
|
percent_complete = percent;
|
|
|
|
|
2009-05-11 23:03:55 +09:00
|
|
|
printf("\rErasing at 0x%llx -- %3d%% complete.",
|
2008-10-30 04:20:26 +09:00
|
|
|
erase.addr, percent);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
if (opts->jffs2 && result == 0)
|
2009-05-11 23:03:55 +09:00
|
|
|
printf(" Cleanmarker written at 0x%llx.",
|
2008-10-30 04:20:26 +09:00
|
|
|
erase.addr);
|
2006-10-10 19:36:02 +09:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!opts->quiet)
|
|
|
|
printf("\n");
|
|
|
|
|
2011-09-12 13:04:06 +09:00
|
|
|
if (opts->scrub)
|
|
|
|
chip->scan_bbt(meminfo);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
|
|
|
|
|
2006-10-10 19:36:02 +09:00
|
|
|
/******************************************************************************
|
|
|
|
* Support for locking / unlocking operations of some NAND devices
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT
|
|
|
|
* state
|
|
|
|
*
|
2008-12-14 00:43:06 +09:00
|
|
|
* @param mtd nand mtd instance
|
2006-10-10 19:36:02 +09:00
|
|
|
* @param tight bring device in lock tight mode
|
|
|
|
*
|
|
|
|
* @return 0 on success, -1 in case of error
|
|
|
|
*
|
|
|
|
* The lock / lock-tight command only applies to the whole chip. To get some
|
|
|
|
* parts of the chip lock and others unlocked use the following sequence:
|
|
|
|
*
|
|
|
|
* - Lock all pages of the chip using nand_lock(mtd, 0) (or the lockpre pin)
|
|
|
|
* - Call nand_unlock() once for each consecutive area to be unlocked
|
|
|
|
* - If desired: Bring the chip to the lock-tight state using nand_lock(mtd, 1)
|
|
|
|
*
|
|
|
|
* If the device is in lock-tight state software can't change the
|
|
|
|
* current active lock/unlock state of all pages. nand_lock() / nand_unlock()
|
|
|
|
* calls will fail. It is only posible to leave lock-tight state by
|
|
|
|
* an hardware signal (low pulse on _WP pin) or by power down.
|
|
|
|
*/
|
2008-12-14 00:43:06 +09:00
|
|
|
int nand_lock(struct mtd_info *mtd, int tight)
|
2006-10-10 19:36:02 +09:00
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
int status;
|
2008-12-14 00:43:06 +09:00
|
|
|
struct nand_chip *chip = mtd->priv;
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* select the NAND device */
|
2008-12-14 00:43:06 +09:00
|
|
|
chip->select_chip(mtd, 0);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
chip->cmdfunc(mtd,
|
2006-10-10 19:36:02 +09:00
|
|
|
(tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK),
|
|
|
|
-1, -1);
|
|
|
|
|
|
|
|
/* call wait ready function */
|
2008-12-14 00:43:06 +09:00
|
|
|
status = chip->waitfunc(mtd, chip);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* see if device thinks it succeeded */
|
|
|
|
if (status & 0x01) {
|
|
|
|
ret = -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* de-select the NAND device */
|
2008-12-14 00:43:06 +09:00
|
|
|
chip->select_chip(mtd, -1);
|
2006-10-10 19:36:02 +09:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* nand_get_lock_status: - query current lock state from one page of NAND
|
|
|
|
* flash
|
|
|
|
*
|
2008-12-14 00:43:06 +09:00
|
|
|
* @param mtd nand mtd instance
|
2006-10-10 19:36:02 +09:00
|
|
|
* @param offset page address to query (muss be page aligned!)
|
|
|
|
*
|
|
|
|
* @return -1 in case of error
|
|
|
|
* >0 lock status:
|
|
|
|
* bitfield with the following combinations:
|
|
|
|
* NAND_LOCK_STATUS_TIGHT: page in tight state
|
|
|
|
* NAND_LOCK_STATUS_UNLOCK: page unlocked
|
|
|
|
*
|
|
|
|
*/
|
2009-05-16 21:27:40 +09:00
|
|
|
int nand_get_lock_status(struct mtd_info *mtd, loff_t offset)
|
2006-10-10 19:36:02 +09:00
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
int chipnr;
|
|
|
|
int page;
|
2008-12-14 00:43:06 +09:00
|
|
|
struct nand_chip *chip = mtd->priv;
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* select the NAND device */
|
2008-12-14 00:43:06 +09:00
|
|
|
chipnr = (int)(offset >> chip->chip_shift);
|
|
|
|
chip->select_chip(mtd, chipnr);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
if ((offset & (mtd->writesize - 1)) != 0) {
|
2006-10-10 19:36:02 +09:00
|
|
|
printf ("nand_get_lock_status: "
|
|
|
|
"Start address must be beginning of "
|
|
|
|
"nand page!\n");
|
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* check the Lock Status */
|
2008-12-14 00:43:06 +09:00
|
|
|
page = (int)(offset >> chip->page_shift);
|
|
|
|
chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
ret = chip->read_byte(mtd) & (NAND_LOCK_STATUS_TIGHT
|
2006-10-10 19:36:02 +09:00
|
|
|
| NAND_LOCK_STATUS_UNLOCK);
|
|
|
|
|
|
|
|
out:
|
|
|
|
/* de-select the NAND device */
|
2008-12-14 00:43:06 +09:00
|
|
|
chip->select_chip(mtd, -1);
|
2006-10-10 19:36:02 +09:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* nand_unlock: - Unlock area of NAND pages
|
|
|
|
* only one consecutive area can be unlocked at one time!
|
|
|
|
*
|
2008-12-14 00:43:06 +09:00
|
|
|
* @param mtd nand mtd instance
|
2006-10-10 19:36:02 +09:00
|
|
|
* @param start start byte address
|
|
|
|
* @param length number of bytes to unlock (must be a multiple of
|
2007-10-31 21:53:06 +09:00
|
|
|
* page size nand->writesize)
|
2012-08-23 06:49:42 +09:00
|
|
|
* @param allexcept if set, unlock everything not selected
|
2006-10-10 19:36:02 +09:00
|
|
|
*
|
|
|
|
* @return 0 on success, -1 in case of error
|
|
|
|
*/
|
2012-08-23 06:49:43 +09:00
|
|
|
int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
|
|
|
|
int allexcept)
|
2006-10-10 19:36:02 +09:00
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
int chipnr;
|
|
|
|
int status;
|
|
|
|
int page;
|
2008-12-14 00:43:06 +09:00
|
|
|
struct nand_chip *chip = mtd->priv;
|
2012-08-23 06:49:42 +09:00
|
|
|
|
2012-08-23 06:49:43 +09:00
|
|
|
debug("nand_unlock%s: start: %08llx, length: %d!\n",
|
2012-08-23 06:49:42 +09:00
|
|
|
allexcept ? " (allexcept)" : "", start, length);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* select the NAND device */
|
2008-12-14 00:43:06 +09:00
|
|
|
chipnr = (int)(start >> chip->chip_shift);
|
|
|
|
chip->select_chip(mtd, chipnr);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* check the WP bit */
|
2008-12-14 00:43:06 +09:00
|
|
|
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
|
|
|
|
if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
|
2006-10-10 19:36:02 +09:00
|
|
|
printf ("nand_unlock: Device is write protected!\n");
|
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
if ((start & (mtd->erasesize - 1)) != 0) {
|
2006-10-10 19:36:02 +09:00
|
|
|
printf ("nand_unlock: Start address must be beginning of "
|
2008-12-14 00:43:06 +09:00
|
|
|
"nand block!\n");
|
2006-10-10 19:36:02 +09:00
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
|
|
|
|
printf ("nand_unlock: Length must be a multiple of nand block "
|
|
|
|
"size %08x!\n", mtd->erasesize);
|
2006-10-10 19:36:02 +09:00
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
/*
|
|
|
|
* Set length so that the last address is set to the
|
|
|
|
* starting address of the last block
|
|
|
|
*/
|
|
|
|
length -= mtd->erasesize;
|
|
|
|
|
2006-10-10 19:36:02 +09:00
|
|
|
/* submit address of first page to unlock */
|
2008-12-14 00:43:06 +09:00
|
|
|
page = (int)(start >> chip->page_shift);
|
|
|
|
chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* submit ADDRESS of LAST page to unlock */
|
2008-12-14 00:43:06 +09:00
|
|
|
page += (int)(length >> chip->page_shift);
|
2012-08-23 06:49:42 +09:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Page addresses for unlocking are supposed to be block-aligned.
|
|
|
|
* At least some NAND chips use the low bit to indicate that the
|
|
|
|
* page range should be inverted.
|
|
|
|
*/
|
|
|
|
if (allexcept)
|
|
|
|
page |= 1;
|
|
|
|
|
2008-12-14 00:43:06 +09:00
|
|
|
chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, page & chip->pagemask);
|
2006-10-10 19:36:02 +09:00
|
|
|
|
|
|
|
/* call wait ready function */
|
2008-12-14 00:43:06 +09:00
|
|
|
status = chip->waitfunc(mtd, chip);
|
2006-10-10 19:36:02 +09:00
|
|
|
/* see if device thinks it succeeded */
|
|
|
|
if (status & 0x01) {
|
|
|
|
/* there was an error */
|
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
/* de-select the NAND device */
|
2008-12-14 00:43:06 +09:00
|
|
|
chip->select_chip(mtd, -1);
|
2006-10-10 19:36:02 +09:00
|
|
|
return ret;
|
|
|
|
}
|
2007-10-31 21:53:06 +09:00
|
|
|
#endif
|
2006-10-10 19:36:02 +09:00
|
|
|
|
2008-06-13 03:20:16 +09:00
|
|
|
/**
|
2010-07-31 06:11:41 +09:00
|
|
|
* check_skip_len
|
2008-06-13 03:20:16 +09:00
|
|
|
*
|
2010-07-31 06:11:41 +09:00
|
|
|
* Check if there are any bad blocks, and whether length including bad
|
|
|
|
* blocks fits into device
|
2008-06-13 03:20:16 +09:00
|
|
|
*
|
|
|
|
* @param nand NAND device
|
|
|
|
* @param offset offset in flash
|
|
|
|
* @param length image length
|
2010-07-31 06:11:41 +09:00
|
|
|
* @return 0 if the image fits and there are no bad blocks
|
|
|
|
* 1 if the image fits, but there are bad blocks
|
|
|
|
* -1 if the image does not fit
|
2008-06-13 03:20:16 +09:00
|
|
|
*/
|
2010-07-31 06:11:41 +09:00
|
|
|
static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
|
2008-06-13 03:20:16 +09:00
|
|
|
{
|
|
|
|
size_t len_excl_bad = 0;
|
2010-07-31 06:11:41 +09:00
|
|
|
int ret = 0;
|
2008-06-13 03:20:16 +09:00
|
|
|
|
|
|
|
while (len_excl_bad < length) {
|
2010-07-31 06:11:41 +09:00
|
|
|
size_t block_len, block_off;
|
|
|
|
loff_t block_start;
|
2008-06-13 03:20:16 +09:00
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
if (offset >= nand->size)
|
|
|
|
return -1;
|
2008-06-13 03:20:16 +09:00
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
block_start = offset & ~(loff_t)(nand->erasesize - 1);
|
|
|
|
block_off = offset & (nand->erasesize - 1);
|
|
|
|
block_len = nand->erasesize - block_off;
|
2008-06-13 03:20:16 +09:00
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
if (!nand_block_isbad(nand, block_start))
|
|
|
|
len_excl_bad += block_len;
|
|
|
|
else
|
|
|
|
ret = 1;
|
|
|
|
|
|
|
|
offset += block_len;
|
2008-06-13 03:20:16 +09:00
|
|
|
}
|
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
return ret;
|
2008-06-13 03:20:16 +09:00
|
|
|
}
|
|
|
|
|
2011-06-15 05:35:06 +09:00
|
|
|
#ifdef CONFIG_CMD_NAND_TRIMFFS
|
|
|
|
static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
|
|
|
|
const size_t *len)
|
|
|
|
{
|
|
|
|
size_t i, l = *len;
|
|
|
|
|
|
|
|
for (i = l - 1; i >= 0; i--)
|
|
|
|
if (buf[i] != 0xFF)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* The resulting length must be aligned to the minimum flash I/O size */
|
|
|
|
l = i + 1;
|
|
|
|
l = (l + nand->writesize - 1) / nand->writesize;
|
|
|
|
l *= nand->writesize;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* since the input length may be unaligned, prevent access past the end
|
|
|
|
* of the buffer
|
|
|
|
*/
|
|
|
|
return min(l, *len);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2008-06-13 03:20:16 +09:00
|
|
|
/**
|
|
|
|
* nand_write_skip_bad:
|
|
|
|
*
|
|
|
|
* Write image to NAND flash.
|
|
|
|
* Blocks that are marked bad are skipped and the is written to the next
|
|
|
|
* block instead as long as the image is short enough to fit even after
|
|
|
|
* skipping the bad blocks.
|
|
|
|
*
|
|
|
|
* @param nand NAND device
|
|
|
|
* @param offset offset in flash
|
|
|
|
* @param length buffer length
|
2011-01-06 12:11:58 +09:00
|
|
|
* @param buffer buffer to read from
|
nand_util: convert nand_write_skip_bad() to flags
In a future commit the behaviour of nand_write_skip_bad()
will be further extended.
Convert the only flag currently passed to the nand_write_
skip_bad() function to a bitfield of only one allocated
member. This should avoid an explosion of int's at the
end of the parameter list or the ambiguous calls like
nand_write_skip_bad(info, offset, len, buf, 0, 1, 1);
nand_write_skip_bad(info, offset, len, buf, 0, 1, 0);
Instead there will be:
nand_write_skip_bad(info, offset, len, buf, WITH_YAFFS_OOB |
WITH_OTHER);
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-05-24 23:18:35 +09:00
|
|
|
* @param flags flags modifying the behaviour of the write to NAND
|
2008-06-13 03:20:16 +09:00
|
|
|
* @return 0 in case of success
|
|
|
|
*/
|
2009-05-16 21:27:40 +09:00
|
|
|
int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
|
nand_util: convert nand_write_skip_bad() to flags
In a future commit the behaviour of nand_write_skip_bad()
will be further extended.
Convert the only flag currently passed to the nand_write_
skip_bad() function to a bitfield of only one allocated
member. This should avoid an explosion of int's at the
end of the parameter list or the ambiguous calls like
nand_write_skip_bad(info, offset, len, buf, 0, 1, 1);
nand_write_skip_bad(info, offset, len, buf, 0, 1, 0);
Instead there will be:
nand_write_skip_bad(info, offset, len, buf, WITH_YAFFS_OOB |
WITH_OTHER);
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-05-24 23:18:35 +09:00
|
|
|
u_char *buffer, int flags)
|
2008-06-13 03:20:16 +09:00
|
|
|
{
|
2011-01-06 12:11:58 +09:00
|
|
|
int rval = 0, blocksize;
|
2008-06-13 03:20:16 +09:00
|
|
|
size_t left_to_write = *length;
|
|
|
|
u_char *p_buffer = buffer;
|
2010-07-31 06:11:41 +09:00
|
|
|
int need_skip;
|
2008-06-13 03:20:16 +09:00
|
|
|
|
2011-01-06 12:11:58 +09:00
|
|
|
#ifdef CONFIG_CMD_NAND_YAFFS
|
nand_util: convert nand_write_skip_bad() to flags
In a future commit the behaviour of nand_write_skip_bad()
will be further extended.
Convert the only flag currently passed to the nand_write_
skip_bad() function to a bitfield of only one allocated
member. This should avoid an explosion of int's at the
end of the parameter list or the ambiguous calls like
nand_write_skip_bad(info, offset, len, buf, 0, 1, 1);
nand_write_skip_bad(info, offset, len, buf, 0, 1, 0);
Instead there will be:
nand_write_skip_bad(info, offset, len, buf, WITH_YAFFS_OOB |
WITH_OTHER);
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-05-24 23:18:35 +09:00
|
|
|
if (flags & WITH_YAFFS_OOB) {
|
2011-06-15 05:35:05 +09:00
|
|
|
if (flags & ~WITH_YAFFS_OOB)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2011-01-06 12:11:58 +09:00
|
|
|
int pages;
|
|
|
|
pages = nand->erasesize / nand->writesize;
|
|
|
|
blocksize = (pages * nand->oobsize) + nand->erasesize;
|
|
|
|
if (*length % (nand->writesize + nand->oobsize)) {
|
|
|
|
printf ("Attempt to write incomplete page"
|
|
|
|
" in yaffs mode\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
#endif
|
|
|
|
{
|
|
|
|
blocksize = nand->erasesize;
|
|
|
|
}
|
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
/*
|
|
|
|
* nand_write() handles unaligned, partial page writes.
|
|
|
|
*
|
|
|
|
* We allow length to be unaligned, for convenience in
|
|
|
|
* using the $filesize variable.
|
|
|
|
*
|
|
|
|
* However, starting at an unaligned offset makes the
|
|
|
|
* semantics of bad block skipping ambiguous (really,
|
|
|
|
* you should only start a block skipping access at a
|
|
|
|
* partition boundary). So don't try to handle that.
|
|
|
|
*/
|
|
|
|
if ((offset & (nand->writesize - 1)) != 0) {
|
2008-06-13 03:20:16 +09:00
|
|
|
printf ("Attempt to write non page aligned data\n");
|
2010-07-31 06:11:41 +09:00
|
|
|
*length = 0;
|
2008-06-13 03:20:16 +09:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
need_skip = check_skip_len(nand, offset, *length);
|
|
|
|
if (need_skip < 0) {
|
2008-06-13 03:20:16 +09:00
|
|
|
printf ("Attempt to write outside the flash area\n");
|
2010-07-31 06:11:41 +09:00
|
|
|
*length = 0;
|
2008-06-13 03:20:16 +09:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2011-06-15 05:35:06 +09:00
|
|
|
if (!need_skip && !(flags & WITH_DROP_FFS)) {
|
2008-06-13 03:20:16 +09:00
|
|
|
rval = nand_write (nand, offset, length, buffer);
|
2010-07-31 06:11:41 +09:00
|
|
|
if (rval == 0)
|
|
|
|
return 0;
|
2008-11-26 01:47:02 +09:00
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
*length = 0;
|
|
|
|
printf ("NAND write to offset %llx failed %d\n",
|
|
|
|
offset, rval);
|
2008-11-26 01:47:02 +09:00
|
|
|
return rval;
|
2008-06-13 03:20:16 +09:00
|
|
|
}
|
|
|
|
|
|
|
|
while (left_to_write > 0) {
|
|
|
|
size_t block_offset = offset & (nand->erasesize - 1);
|
2011-06-15 05:35:06 +09:00
|
|
|
size_t write_size, truncated_write_size;
|
2008-06-13 03:20:16 +09:00
|
|
|
|
2009-08-01 07:30:34 +09:00
|
|
|
WATCHDOG_RESET ();
|
|
|
|
|
2008-06-13 03:20:16 +09:00
|
|
|
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
|
2009-05-16 21:27:40 +09:00
|
|
|
printf ("Skip bad block 0x%08llx\n",
|
2008-06-13 03:20:16 +09:00
|
|
|
offset & ~(nand->erasesize - 1));
|
|
|
|
offset += nand->erasesize - block_offset;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2011-01-06 12:11:58 +09:00
|
|
|
if (left_to_write < (blocksize - block_offset))
|
2008-06-13 03:20:16 +09:00
|
|
|
write_size = left_to_write;
|
|
|
|
else
|
2011-01-06 12:11:58 +09:00
|
|
|
write_size = blocksize - block_offset;
|
|
|
|
|
|
|
|
#ifdef CONFIG_CMD_NAND_YAFFS
|
nand_util: convert nand_write_skip_bad() to flags
In a future commit the behaviour of nand_write_skip_bad()
will be further extended.
Convert the only flag currently passed to the nand_write_
skip_bad() function to a bitfield of only one allocated
member. This should avoid an explosion of int's at the
end of the parameter list or the ambiguous calls like
nand_write_skip_bad(info, offset, len, buf, 0, 1, 1);
nand_write_skip_bad(info, offset, len, buf, 0, 1, 0);
Instead there will be:
nand_write_skip_bad(info, offset, len, buf, WITH_YAFFS_OOB |
WITH_OTHER);
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-05-24 23:18:35 +09:00
|
|
|
if (flags & WITH_YAFFS_OOB) {
|
2011-01-06 12:11:58 +09:00
|
|
|
int page, pages;
|
|
|
|
size_t pagesize = nand->writesize;
|
|
|
|
size_t pagesize_oob = pagesize + nand->oobsize;
|
|
|
|
struct mtd_oob_ops ops;
|
|
|
|
|
|
|
|
ops.len = pagesize;
|
|
|
|
ops.ooblen = nand->oobsize;
|
|
|
|
ops.mode = MTD_OOB_AUTO;
|
|
|
|
ops.ooboffs = 0;
|
|
|
|
|
|
|
|
pages = write_size / pagesize_oob;
|
|
|
|
for (page = 0; page < pages; page++) {
|
2011-02-03 09:15:57 +09:00
|
|
|
WATCHDOG_RESET();
|
|
|
|
|
2011-01-06 12:11:58 +09:00
|
|
|
ops.datbuf = p_buffer;
|
|
|
|
ops.oobbuf = ops.datbuf + pagesize;
|
|
|
|
|
|
|
|
rval = nand->write_oob(nand, offset, &ops);
|
2012-01-18 04:55:02 +09:00
|
|
|
if (rval != 0)
|
2011-01-06 12:11:58 +09:00
|
|
|
break;
|
|
|
|
|
|
|
|
offset += pagesize;
|
|
|
|
p_buffer += pagesize_oob;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
#endif
|
|
|
|
{
|
2011-06-15 05:35:06 +09:00
|
|
|
truncated_write_size = write_size;
|
|
|
|
#ifdef CONFIG_CMD_NAND_TRIMFFS
|
|
|
|
if (flags & WITH_DROP_FFS)
|
|
|
|
truncated_write_size = drop_ffs(nand, p_buffer,
|
|
|
|
&write_size);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
rval = nand_write(nand, offset, &truncated_write_size,
|
|
|
|
p_buffer);
|
2011-01-06 12:11:58 +09:00
|
|
|
offset += write_size;
|
|
|
|
p_buffer += write_size;
|
|
|
|
}
|
2008-06-13 03:20:16 +09:00
|
|
|
|
|
|
|
if (rval != 0) {
|
2009-05-16 21:27:40 +09:00
|
|
|
printf ("NAND write to offset %llx failed %d\n",
|
2008-08-14 21:41:06 +09:00
|
|
|
offset, rval);
|
2008-06-13 03:20:16 +09:00
|
|
|
*length -= left_to_write;
|
|
|
|
return rval;
|
|
|
|
}
|
|
|
|
|
|
|
|
left_to_write -= write_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* nand_read_skip_bad:
|
|
|
|
*
|
|
|
|
* Read image from NAND flash.
|
|
|
|
* Blocks that are marked bad are skipped and the next block is readen
|
|
|
|
* instead as long as the image is short enough to fit even after skipping the
|
|
|
|
* bad blocks.
|
|
|
|
*
|
|
|
|
* @param nand NAND device
|
|
|
|
* @param offset offset in flash
|
|
|
|
* @param length buffer length, on return holds remaining bytes to read
|
|
|
|
* @param buffer buffer to write to
|
|
|
|
* @return 0 in case of success
|
|
|
|
*/
|
2009-05-16 21:27:40 +09:00
|
|
|
int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
|
2008-06-13 03:20:16 +09:00
|
|
|
u_char *buffer)
|
|
|
|
{
|
|
|
|
int rval;
|
|
|
|
size_t left_to_read = *length;
|
|
|
|
u_char *p_buffer = buffer;
|
2010-07-31 06:11:41 +09:00
|
|
|
int need_skip;
|
2008-06-13 03:20:16 +09:00
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
if ((offset & (nand->writesize - 1)) != 0) {
|
|
|
|
printf ("Attempt to read non page aligned data\n");
|
|
|
|
*length = 0;
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2008-06-13 03:20:16 +09:00
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
need_skip = check_skip_len(nand, offset, *length);
|
|
|
|
if (need_skip < 0) {
|
2008-06-13 03:20:16 +09:00
|
|
|
printf ("Attempt to read outside the flash area\n");
|
2010-07-31 06:11:41 +09:00
|
|
|
*length = 0;
|
2008-06-13 03:20:16 +09:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2010-07-31 06:11:41 +09:00
|
|
|
if (!need_skip) {
|
2008-06-13 03:20:16 +09:00
|
|
|
rval = nand_read (nand, offset, length, buffer);
|
2009-07-14 19:51:10 +09:00
|
|
|
if (!rval || rval == -EUCLEAN)
|
|
|
|
return 0;
|
2010-07-31 06:11:41 +09:00
|
|
|
|
|
|
|
*length = 0;
|
2009-07-14 19:51:10 +09:00
|
|
|
printf ("NAND read from offset %llx failed %d\n",
|
|
|
|
offset, rval);
|
2008-11-26 01:47:02 +09:00
|
|
|
return rval;
|
2008-06-13 03:20:16 +09:00
|
|
|
}
|
|
|
|
|
|
|
|
while (left_to_read > 0) {
|
|
|
|
size_t block_offset = offset & (nand->erasesize - 1);
|
|
|
|
size_t read_length;
|
|
|
|
|
2009-08-01 07:30:34 +09:00
|
|
|
WATCHDOG_RESET ();
|
|
|
|
|
2008-06-13 03:20:16 +09:00
|
|
|
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
|
2009-05-16 21:27:40 +09:00
|
|
|
printf ("Skipping bad block 0x%08llx\n",
|
2008-06-13 03:20:16 +09:00
|
|
|
offset & ~(nand->erasesize - 1));
|
|
|
|
offset += nand->erasesize - block_offset;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (left_to_read < (nand->erasesize - block_offset))
|
|
|
|
read_length = left_to_read;
|
|
|
|
else
|
|
|
|
read_length = nand->erasesize - block_offset;
|
|
|
|
|
|
|
|
rval = nand_read (nand, offset, &read_length, p_buffer);
|
2009-07-14 19:51:10 +09:00
|
|
|
if (rval && rval != -EUCLEAN) {
|
2009-05-16 21:27:40 +09:00
|
|
|
printf ("NAND read from offset %llx failed %d\n",
|
2008-08-14 21:41:06 +09:00
|
|
|
offset, rval);
|
2008-06-13 03:20:16 +09:00
|
|
|
*length -= left_to_read;
|
|
|
|
return rval;
|
|
|
|
}
|
|
|
|
|
|
|
|
left_to_read -= read_length;
|
|
|
|
offset += read_length;
|
|
|
|
p_buffer += read_length;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|