2020-07-08 04:11:39 +09:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
|
|
|
/*
|
|
|
|
* Generation of tables for particular device types
|
|
|
|
*
|
|
|
|
* Copyright 2019 Google LLC
|
|
|
|
* Mostly taken from coreboot file of the same name
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __ACPI_DEVICE_H
|
|
|
|
#define __ACPI_DEVICE_H
|
|
|
|
|
2020-07-08 04:11:48 +09:00
|
|
|
#include <i2c.h>
|
2020-09-23 03:45:01 +09:00
|
|
|
#include <irq.h>
|
2020-07-08 04:11:49 +09:00
|
|
|
#include <spi.h>
|
2020-09-23 03:45:01 +09:00
|
|
|
#include <asm-generic/gpio.h>
|
2020-07-08 04:11:40 +09:00
|
|
|
#include <linux/bitops.h>
|
|
|
|
|
2020-07-08 04:11:43 +09:00
|
|
|
struct acpi_ctx;
|
2020-07-08 04:11:46 +09:00
|
|
|
struct gpio_desc;
|
2020-07-08 04:11:43 +09:00
|
|
|
struct irq;
|
2020-07-08 04:11:39 +09:00
|
|
|
struct udevice;
|
|
|
|
|
2020-07-08 04:11:41 +09:00
|
|
|
/* ACPI descriptor values for common descriptors: SERIAL_BUS means I2C */
|
|
|
|
#define ACPI_DESCRIPTOR_LARGE BIT(7)
|
2020-07-08 12:32:11 +09:00
|
|
|
#define ACPI_DESCRIPTOR_REGISTER (ACPI_DESCRIPTOR_LARGE | 2)
|
2020-07-08 04:11:41 +09:00
|
|
|
#define ACPI_DESCRIPTOR_INTERRUPT (ACPI_DESCRIPTOR_LARGE | 9)
|
|
|
|
#define ACPI_DESCRIPTOR_GPIO (ACPI_DESCRIPTOR_LARGE | 12)
|
|
|
|
#define ACPI_DESCRIPTOR_SERIAL_BUS (ACPI_DESCRIPTOR_LARGE | 14)
|
|
|
|
|
2020-07-08 04:11:39 +09:00
|
|
|
/* Length of a full path to an ACPI device */
|
|
|
|
#define ACPI_PATH_MAX 30
|
|
|
|
|
2020-09-23 03:44:58 +09:00
|
|
|
/* UUID for an I2C _DSM method */
|
|
|
|
#define ACPI_DSM_I2C_HID_UUID "3cdff6f7-4267-4555-ad05-b30a3d8938de"
|
|
|
|
|
2020-07-08 04:11:40 +09:00
|
|
|
/* Values that can be returned for ACPI device _STA method */
|
|
|
|
enum acpi_dev_status {
|
|
|
|
ACPI_DSTATUS_PRESENT = BIT(0),
|
|
|
|
ACPI_DSTATUS_ENABLED = BIT(1),
|
|
|
|
ACPI_DSTATUS_SHOW_IN_UI = BIT(2),
|
|
|
|
ACPI_DSTATUS_OK = BIT(3),
|
|
|
|
ACPI_DSTATUS_HAS_BATTERY = BIT(4),
|
|
|
|
|
|
|
|
ACPI_DSTATUS_ALL_OFF = 0,
|
|
|
|
ACPI_DSTATUS_HIDDEN_ON = ACPI_DSTATUS_PRESENT | ACPI_DSTATUS_ENABLED |
|
|
|
|
ACPI_DSTATUS_OK,
|
|
|
|
ACPI_DSTATUS_ALL_ON = ACPI_DSTATUS_HIDDEN_ON |
|
|
|
|
ACPI_DSTATUS_SHOW_IN_UI,
|
|
|
|
};
|
|
|
|
|
2020-07-08 04:11:41 +09:00
|
|
|
/** enum acpi_irq_mode - edge/level trigger mode */
|
|
|
|
enum acpi_irq_mode {
|
|
|
|
ACPI_IRQ_EDGE_TRIGGERED,
|
|
|
|
ACPI_IRQ_LEVEL_TRIGGERED,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum acpi_irq_polarity - polarity of interrupt
|
|
|
|
*
|
|
|
|
* @ACPI_IRQ_ACTIVE_LOW - for ACPI_IRQ_EDGE_TRIGGERED this means falling edge
|
|
|
|
* @ACPI_IRQ_ACTIVE_HIGH - for ACPI_IRQ_EDGE_TRIGGERED this means rising edge
|
|
|
|
* @ACPI_IRQ_ACTIVE_BOTH - not meaningful for ACPI_IRQ_EDGE_TRIGGERED
|
|
|
|
*/
|
|
|
|
enum acpi_irq_polarity {
|
|
|
|
ACPI_IRQ_ACTIVE_LOW,
|
|
|
|
ACPI_IRQ_ACTIVE_HIGH,
|
|
|
|
ACPI_IRQ_ACTIVE_BOTH,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum acpi_irq_shared - whether interrupt is shared or not
|
|
|
|
*
|
|
|
|
* @ACPI_IRQ_EXCLUSIVE: only this device uses the interrupt
|
|
|
|
* @ACPI_IRQ_SHARED: other devices may use this interrupt
|
|
|
|
*/
|
|
|
|
enum acpi_irq_shared {
|
|
|
|
ACPI_IRQ_EXCLUSIVE,
|
|
|
|
ACPI_IRQ_SHARED,
|
|
|
|
};
|
|
|
|
|
|
|
|
/** enum acpi_irq_wake - indicates whether this interrupt can wake the device */
|
|
|
|
enum acpi_irq_wake {
|
|
|
|
ACPI_IRQ_NO_WAKE,
|
|
|
|
ACPI_IRQ_WAKE,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct acpi_irq - representation of an ACPI interrupt
|
|
|
|
*
|
|
|
|
* @pin: ACPI pin that is monitored for the interrupt
|
|
|
|
* @mode: Edge/level triggering
|
|
|
|
* @polarity: Interrupt polarity
|
|
|
|
* @shared: Whether interrupt is shared or not
|
|
|
|
* @wake: Whether interrupt can wake the device from sleep
|
|
|
|
*/
|
|
|
|
struct acpi_irq {
|
|
|
|
unsigned int pin;
|
|
|
|
enum acpi_irq_mode mode;
|
|
|
|
enum acpi_irq_polarity polarity;
|
|
|
|
enum acpi_irq_shared shared;
|
|
|
|
enum acpi_irq_wake wake;
|
|
|
|
};
|
|
|
|
|
2020-07-08 04:11:44 +09:00
|
|
|
/**
|
|
|
|
* enum acpi_gpio_type - type of the descriptor
|
|
|
|
*
|
|
|
|
* @ACPI_GPIO_TYPE_INTERRUPT: GpioInterrupt
|
|
|
|
* @ACPI_GPIO_TYPE_IO: GpioIo
|
|
|
|
*/
|
|
|
|
enum acpi_gpio_type {
|
|
|
|
ACPI_GPIO_TYPE_INTERRUPT,
|
|
|
|
ACPI_GPIO_TYPE_IO,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum acpi_gpio_pull - pull direction
|
|
|
|
*
|
|
|
|
* @ACPI_GPIO_PULL_DEFAULT: Use default value for pin
|
|
|
|
* @ACPI_GPIO_PULL_UP: Pull up
|
|
|
|
* @ACPI_GPIO_PULL_DOWN: Pull down
|
|
|
|
* @ACPI_GPIO_PULL_NONE: No pullup/pulldown
|
|
|
|
*/
|
|
|
|
enum acpi_gpio_pull {
|
|
|
|
ACPI_GPIO_PULL_DEFAULT,
|
|
|
|
ACPI_GPIO_PULL_UP,
|
|
|
|
ACPI_GPIO_PULL_DOWN,
|
|
|
|
ACPI_GPIO_PULL_NONE,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum acpi_gpio_io_restrict - controls input/output of pin
|
|
|
|
*
|
|
|
|
* @ACPI_GPIO_IO_RESTRICT_NONE: no restrictions
|
|
|
|
* @ACPI_GPIO_IO_RESTRICT_INPUT: input only (no output)
|
|
|
|
* @ACPI_GPIO_IO_RESTRICT_OUTPUT: output only (no input)
|
|
|
|
* @ACPI_GPIO_IO_RESTRICT_PRESERVE: preserve settings when driver not active
|
|
|
|
*/
|
|
|
|
enum acpi_gpio_io_restrict {
|
|
|
|
ACPI_GPIO_IO_RESTRICT_NONE,
|
|
|
|
ACPI_GPIO_IO_RESTRICT_INPUT,
|
|
|
|
ACPI_GPIO_IO_RESTRICT_OUTPUT,
|
|
|
|
ACPI_GPIO_IO_RESTRICT_PRESERVE,
|
|
|
|
};
|
|
|
|
|
|
|
|
/** enum acpi_gpio_polarity - controls the GPIO polarity */
|
|
|
|
enum acpi_gpio_polarity {
|
|
|
|
ACPI_GPIO_ACTIVE_HIGH = 0,
|
|
|
|
ACPI_GPIO_ACTIVE_LOW = 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define ACPI_GPIO_REVISION_ID 1
|
|
|
|
#define ACPI_GPIO_MAX_PINS 2
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct acpi_gpio - representation of an ACPI GPIO
|
|
|
|
*
|
|
|
|
* @pin_count: Number of pins represented
|
|
|
|
* @pins: List of pins
|
|
|
|
* @pin0_addr: Address in memory of the control registers for pin 0. This is
|
|
|
|
* used when generating ACPI tables
|
|
|
|
* @type: GPIO type
|
|
|
|
* @pull: Pullup/pulldown setting
|
|
|
|
* @resource: Resource name for this GPIO controller
|
|
|
|
* For GpioInt:
|
|
|
|
* @interrupt_debounce_timeout: Debounce timeout in units of 10us
|
|
|
|
* @irq: Interrupt
|
|
|
|
*
|
|
|
|
* For GpioIo:
|
|
|
|
* @output_drive_strength: Drive strength in units of 10uA
|
|
|
|
* @io_shared; true if GPIO is shared
|
|
|
|
* @io_restrict: I/O restriction setting
|
|
|
|
* @polarity: GPIO polarity
|
2020-09-23 03:45:43 +09:00
|
|
|
*
|
|
|
|
* Note that GpioIo doesn't have any means of Active Low / High setting, so a
|
|
|
|
* _DSD must be provided to mitigate this.
|
|
|
|
*
|
|
|
|
* GpioIo doesn't properly communicate the initial state of the output pin,
|
|
|
|
* thus Linux assumes the simple rule:
|
|
|
|
*
|
|
|
|
* Pull Bias Polarity Requested...
|
|
|
|
*
|
|
|
|
* Implicit x AS IS (assumed firmware configured for us)
|
|
|
|
* Explicit x (no _DSD) as Pull Bias (Up == High, Down == Low),
|
|
|
|
* assuming non-active (Polarity = !Pull Bias)
|
|
|
|
*
|
|
|
|
* Down Low as low, assuming active
|
|
|
|
* Down High as high, assuming non-active
|
|
|
|
* Up Low as high, assuming non-active
|
|
|
|
* Up High as high, assuming active
|
|
|
|
*
|
|
|
|
* GpioIo() can be used as interrupt and in this case the IoRestriction mustn't
|
|
|
|
* be OutputOnly. It also requires active_low flag from _DSD in cases where it's
|
|
|
|
* needed (better to always provide than rely on above assumption made on OS
|
|
|
|
* level).
|
2020-07-08 04:11:44 +09:00
|
|
|
*/
|
|
|
|
struct acpi_gpio {
|
|
|
|
int pin_count;
|
|
|
|
u16 pins[ACPI_GPIO_MAX_PINS];
|
|
|
|
ulong pin0_addr;
|
|
|
|
|
|
|
|
enum acpi_gpio_type type;
|
|
|
|
enum acpi_gpio_pull pull;
|
|
|
|
char resource[ACPI_PATH_MAX];
|
|
|
|
|
|
|
|
/* GpioInt */
|
|
|
|
u16 interrupt_debounce_timeout;
|
|
|
|
struct acpi_irq irq;
|
|
|
|
|
|
|
|
/* GpioIo */
|
|
|
|
u16 output_drive_strength;
|
|
|
|
bool io_shared;
|
|
|
|
enum acpi_gpio_io_restrict io_restrict;
|
|
|
|
enum acpi_gpio_polarity polarity;
|
|
|
|
};
|
|
|
|
|
2020-07-08 04:11:48 +09:00
|
|
|
/* ACPI Descriptors for Serial Bus interfaces */
|
|
|
|
#define ACPI_SERIAL_BUS_TYPE_I2C 1
|
2020-07-08 04:11:49 +09:00
|
|
|
#define ACPI_SERIAL_BUS_TYPE_SPI 2
|
2020-07-08 04:11:48 +09:00
|
|
|
#define ACPI_I2C_SERIAL_BUS_REVISION_ID 1 /* TODO: upgrade to 2 */
|
|
|
|
#define ACPI_I2C_TYPE_SPECIFIC_REVISION_ID 1
|
2020-07-08 04:11:49 +09:00
|
|
|
#define ACPI_SPI_SERIAL_BUS_REVISION_ID 1
|
|
|
|
#define ACPI_SPI_TYPE_SPECIFIC_REVISION_ID 1
|
2020-07-08 04:11:48 +09:00
|
|
|
|
|
|
|
/**
|
|
|
|
* struct acpi_i2c - representation of an ACPI I2C device
|
|
|
|
*
|
|
|
|
* @address: 7-bit or 10-bit I2C address
|
|
|
|
* @mode_10bit: Which address size is used
|
|
|
|
* @speed: Bus speed in Hz
|
|
|
|
* @resource: Resource name for the I2C controller
|
|
|
|
*/
|
|
|
|
struct acpi_i2c {
|
|
|
|
u16 address;
|
|
|
|
enum i2c_address_mode mode_10bit;
|
|
|
|
enum i2c_speed_rate speed;
|
|
|
|
const char *resource;
|
|
|
|
};
|
|
|
|
|
2020-07-08 04:11:49 +09:00
|
|
|
/**
|
|
|
|
* struct acpi_spi - representation of an ACPI SPI device
|
|
|
|
*
|
|
|
|
* @device_select: Chip select used by this device (typically 0)
|
|
|
|
* @device_select_polarity: Polarity for the device
|
|
|
|
* @wire_mode: Number of wires used for SPI
|
|
|
|
* @speed: Bus speed in Hz
|
|
|
|
* @data_bit_length: Word length for SPI (typically 8)
|
|
|
|
* @clock_phase: Clock phase to capture data
|
|
|
|
* @clock_polarity: Bus polarity
|
|
|
|
* @resource: Resource name for the SPI controller
|
|
|
|
*/
|
|
|
|
struct acpi_spi {
|
|
|
|
u16 device_select;
|
|
|
|
enum spi_polarity device_select_polarity;
|
|
|
|
enum spi_wire_mode wire_mode;
|
|
|
|
unsigned int speed;
|
|
|
|
u8 data_bit_length;
|
|
|
|
enum spi_clock_phase clock_phase;
|
|
|
|
enum spi_polarity clock_polarity;
|
|
|
|
const char *resource;
|
|
|
|
};
|
|
|
|
|
2020-09-23 03:45:01 +09:00
|
|
|
/**
|
|
|
|
* struct acpi_i2c_priv - Information read from device tree
|
|
|
|
*
|
|
|
|
* This is used by devices which want to specify various pieces of ACPI
|
|
|
|
* information, including power control. It allows a generic function to
|
|
|
|
* generate the information for ACPI, based on device-tree properties.
|
|
|
|
*
|
|
|
|
* @disable_gpio_export_in_crs: Don't export GPIOs in the CRS
|
|
|
|
* @reset_gpio: GPIO used to assert reset to the device
|
|
|
|
* @enable_gpio: GPIO used to enable the device
|
|
|
|
* @stop_gpio: GPIO used to stop the device
|
|
|
|
* @irq_gpio: GPIO used for interrupt (if @irq is not used)
|
|
|
|
* @irq: IRQ used for interrupt (if @irq_gpio is not used)
|
|
|
|
* @hid: _HID value for device (required)
|
|
|
|
* @uid: _UID value for device
|
|
|
|
* @desc: _DDN value for device
|
|
|
|
* @wake: Wake event, e.g. GPE0_DW1_15; 0 if none
|
|
|
|
* @property_count: Number of other DSD properties (currently always 0)
|
|
|
|
* @probed: true set set 'linux,probed' property
|
|
|
|
* @compat_string: Device tree compatible string to report through ACPI
|
|
|
|
* @has_power_resource: true if this device has a power resource
|
|
|
|
* @reset_delay_ms: Delay after de-asserting reset, in ms
|
|
|
|
* @reset_off_delay_ms: Delay after asserting reset (during power off)
|
|
|
|
* @enable_delay_ms: Delay after asserting enable
|
|
|
|
* @enable_off_delay_ms: Delay after de-asserting enable (during power off)
|
|
|
|
* @stop_delay_ms: Delay after de-aserting stop
|
|
|
|
* @stop_off_delay_ms: Delay after asserting stop (during power off)
|
|
|
|
* @hid_desc_reg_offset: HID register offset (for Human Interface Devices)
|
|
|
|
*/
|
|
|
|
struct acpi_i2c_priv {
|
|
|
|
bool disable_gpio_export_in_crs;
|
|
|
|
struct gpio_desc reset_gpio;
|
|
|
|
struct gpio_desc enable_gpio;
|
|
|
|
struct gpio_desc irq_gpio;
|
|
|
|
struct gpio_desc stop_gpio;
|
|
|
|
struct irq irq;
|
|
|
|
const char *hid;
|
|
|
|
u32 uid;
|
|
|
|
const char *desc;
|
|
|
|
u32 wake;
|
|
|
|
u32 property_count;
|
|
|
|
bool probed;
|
|
|
|
const char *compat_string;
|
|
|
|
bool has_power_resource;
|
|
|
|
u32 reset_delay_ms;
|
|
|
|
u32 reset_off_delay_ms;
|
|
|
|
u32 enable_delay_ms;
|
|
|
|
u32 enable_off_delay_ms;
|
|
|
|
u32 stop_delay_ms;
|
|
|
|
u32 stop_off_delay_ms;
|
|
|
|
u32 hid_desc_reg_offset;
|
|
|
|
};
|
|
|
|
|
2020-07-08 04:11:39 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_path() - Get the full path to an ACPI device
|
|
|
|
*
|
|
|
|
* This gets the full path in the form XXXX.YYYY.ZZZZ where XXXX is the root
|
|
|
|
* and ZZZZ is the device. All parent devices are added to the path.
|
|
|
|
*
|
|
|
|
* @dev: Device to check
|
|
|
|
* @buf: Buffer to place the path in (should be ACPI_PATH_MAX long)
|
|
|
|
* @maxlen: Size of buffer (typically ACPI_PATH_MAX)
|
|
|
|
* @return 0 if OK, -ve on error
|
|
|
|
*/
|
|
|
|
int acpi_device_path(const struct udevice *dev, char *buf, int maxlen);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* acpi_device_scope() - Get the scope of an ACPI device
|
|
|
|
*
|
|
|
|
* This gets the scope which is the full path of the parent device, as per
|
|
|
|
* acpi_device_path().
|
|
|
|
*
|
|
|
|
* @dev: Device to check
|
|
|
|
* @buf: Buffer to place the path in (should be ACPI_PATH_MAX long)
|
|
|
|
* @maxlen: Size of buffer (typically ACPI_PATH_MAX)
|
|
|
|
* @return 0 if OK, -EINVAL if the device has no parent, other -ve on other
|
|
|
|
* error
|
|
|
|
*/
|
|
|
|
int acpi_device_scope(const struct udevice *dev, char *scope, int maxlen);
|
|
|
|
|
2020-07-08 04:11:40 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_status() - Get the status of a device
|
|
|
|
*
|
|
|
|
* This currently just returns ACPI_DSTATUS_ALL_ON. It does not support
|
|
|
|
* inactive or hidden devices.
|
|
|
|
*
|
|
|
|
* @dev: Device to check
|
|
|
|
* @return device status, as ACPI_DSTATUS_...
|
|
|
|
*/
|
|
|
|
enum acpi_dev_status acpi_device_status(const struct udevice *dev);
|
|
|
|
|
2020-07-08 04:11:43 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_write_interrupt_irq() - Write an interrupt descriptor
|
|
|
|
*
|
|
|
|
* This writes an ACPI interrupt descriptor for the given interrupt, converting
|
|
|
|
* fields as needed.
|
|
|
|
*
|
|
|
|
* @ctx: ACPI context pointer
|
|
|
|
* @req_irq: Interrupt to output
|
|
|
|
* @return IRQ pin number if OK, -ve on error
|
|
|
|
*/
|
|
|
|
int acpi_device_write_interrupt_irq(struct acpi_ctx *ctx,
|
|
|
|
const struct irq *req_irq);
|
|
|
|
|
2020-07-08 04:11:46 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_write_gpio() - Write GpioIo() or GpioInt() descriptor
|
|
|
|
*
|
|
|
|
* @gpio: GPIO information to write
|
|
|
|
* @return GPIO pin number of first GPIO if OK, -ve on error
|
|
|
|
*/
|
|
|
|
int acpi_device_write_gpio(struct acpi_ctx *ctx, const struct acpi_gpio *gpio);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* acpi_device_write_gpio_desc() - Write a GPIO to ACPI
|
|
|
|
*
|
|
|
|
* This creates a GPIO descriptor for a GPIO, including information ACPI needs
|
|
|
|
* to use it.
|
|
|
|
*
|
|
|
|
* @ctx: ACPI context pointer
|
|
|
|
* @desc: GPIO to write
|
|
|
|
* @return 0 if OK, -ve on error
|
|
|
|
*/
|
|
|
|
int acpi_device_write_gpio_desc(struct acpi_ctx *ctx,
|
|
|
|
const struct gpio_desc *desc);
|
|
|
|
|
2020-07-08 04:11:47 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_write_interrupt_or_gpio() - Write interrupt or GPIO to ACPI
|
|
|
|
*
|
|
|
|
* This reads an interrupt from the device tree "interrupts-extended" property,
|
|
|
|
* if available. If not it reads the first GPIO with the name @prop.
|
|
|
|
*
|
|
|
|
* If an interrupt is found, an ACPI interrupt descriptor is written to the ACPI
|
|
|
|
* output. If not, but if a GPIO is found, a GPIO descriptor is written.
|
|
|
|
*
|
|
|
|
* @return irq or GPIO pin number if OK, -ve if neither an interrupt nor a GPIO
|
|
|
|
* could be found, or some other error occurred
|
|
|
|
*/
|
|
|
|
int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx,
|
|
|
|
struct udevice *dev, const char *prop);
|
|
|
|
|
2020-09-23 03:44:58 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_write_dsm_i2c_hid() - Write a device-specific method for HID
|
|
|
|
*
|
|
|
|
* This writes a DSM for an I2C Human-Interface Device based on the config
|
|
|
|
* provided
|
|
|
|
*
|
|
|
|
* @hid_desc_reg_offset: HID register offset
|
|
|
|
*/
|
|
|
|
int acpi_device_write_dsm_i2c_hid(struct acpi_ctx *ctx,
|
|
|
|
int hid_desc_reg_offset);
|
|
|
|
|
2020-07-08 04:11:48 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_write_i2c_dev() - Write an I2C device to ACPI
|
|
|
|
*
|
|
|
|
* This creates a I2cSerialBus descriptor for an I2C device, including
|
|
|
|
* information ACPI needs to use it.
|
|
|
|
*
|
|
|
|
* @ctx: ACPI context pointer
|
|
|
|
* @dev: I2C device to write
|
|
|
|
* @return I2C address of device if OK, -ve on error
|
|
|
|
*/
|
|
|
|
int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev);
|
|
|
|
|
2020-07-08 04:11:49 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_write_spi_dev() - Write a SPI device to ACPI
|
|
|
|
*
|
|
|
|
* This writes a serial bus descriptor for the SPI device so that ACPI can use
|
|
|
|
* it
|
|
|
|
*
|
|
|
|
* @ctx: ACPI context pointer
|
|
|
|
* @dev: SPI device to write
|
|
|
|
* @return 0 if OK, -ve on error
|
|
|
|
*/
|
|
|
|
int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev);
|
|
|
|
|
2020-07-08 04:12:02 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_add_power_res() - Add a basic PowerResource block for a device
|
|
|
|
*
|
|
|
|
* This includes GPIOs to control enable, reset and stop operation of the
|
|
|
|
* device. Each GPIO is optional, but at least one must be provided.
|
|
|
|
* This can be applied to any device that has power control, so is fairly
|
|
|
|
* generic.
|
|
|
|
*
|
|
|
|
* Reset - Put the device into / take the device out of reset.
|
|
|
|
* Enable - Enable / disable power to device.
|
|
|
|
* Stop - Stop / start operation of device.
|
|
|
|
*
|
|
|
|
* @ctx: ACPI context pointer
|
|
|
|
* @tx_state_val: Mask to use to toggle the TX state on the GPIO pin, e,g.
|
|
|
|
* PAD_CFG0_TX_STATE
|
|
|
|
* @dw0_read: Name to use to read dw0, e.g. "\\_SB.GPC0"
|
|
|
|
* @dw0_write: Name to use to read dw0, e.g. "\\_SB.SPC0"
|
|
|
|
* @reset_gpio: GPIO used to take device out of reset or to put it into reset
|
|
|
|
* @reset_delay_ms: Delay to be inserted after device is taken out of reset
|
|
|
|
* (_ON method delay)
|
|
|
|
* @reset_off_delay_ms: Delay to be inserted after device is put into reset
|
|
|
|
* (_OFF method delay)
|
|
|
|
* @enable_gpio: GPIO used to enable device
|
|
|
|
* @enable_delay_ms: Delay to be inserted after device is enabled
|
|
|
|
* @enable_off_delay_ms: Delay to be inserted after device is disabled
|
|
|
|
* (_OFF method delay)
|
|
|
|
* @stop_gpio: GPIO used to stop operation of device
|
|
|
|
* @stop_delay_ms: Delay to be inserted after disabling stop (_ON method delay)
|
|
|
|
* @stop_off_delay_ms: Delay to be inserted after enabling stop.
|
|
|
|
* (_OFF method delay)
|
|
|
|
*
|
|
|
|
* @return 0 if OK, -ve if at least one GPIO is not provided
|
|
|
|
*/
|
|
|
|
int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val,
|
|
|
|
const char *dw0_read, const char *dw0_write,
|
|
|
|
const struct gpio_desc *reset_gpio,
|
|
|
|
uint reset_delay_ms, uint reset_off_delay_ms,
|
|
|
|
const struct gpio_desc *enable_gpio,
|
|
|
|
uint enable_delay_ms, uint enable_off_delay_ms,
|
|
|
|
const struct gpio_desc *stop_gpio,
|
|
|
|
uint stop_delay_ms, uint stop_off_delay_ms);
|
|
|
|
|
2020-07-08 04:12:11 +09:00
|
|
|
/**
|
|
|
|
* acpi_device_infer_name() - Infer the name from its uclass or parent
|
|
|
|
*
|
|
|
|
* Many ACPI devices have a standard name that can be inferred from the uclass
|
|
|
|
* they are in, or the uclass of their parent. These rules are implemented in
|
|
|
|
* this function. It attempts to produce a name for a device based on these
|
|
|
|
* rules.
|
|
|
|
*
|
|
|
|
* NOTE: This currently supports only x86 devices. Feel free to enhance it for
|
|
|
|
* other architectures as needed.
|
|
|
|
*
|
|
|
|
* @dev: Device to check
|
|
|
|
* @out_name: Place to put the name (must hold ACPI_NAME_MAX bytes)
|
|
|
|
* @return 0 if a name was found, -ENOENT if not found, -ENXIO if the device
|
|
|
|
* sequence number could not be determined
|
|
|
|
*/
|
|
|
|
int acpi_device_infer_name(const struct udevice *dev, char *out_name);
|
|
|
|
|
2020-07-08 04:11:39 +09:00
|
|
|
#endif
|