mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
410 lines
9.6 KiB
C
410 lines
9.6 KiB
C
![]() |
/*
|
||
|
* (C) Copyright 2002
|
||
|
* David Mueller, ELSOFT AG, d.mueller@elsoft.ch
|
||
|
*
|
||
|
* See file CREDITS for list of people who contributed to this
|
||
|
* project.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
|
||
|
/* This code should work for both the S3C2400 and the S3C2410
|
||
|
* as they seem to have the same I2C controller inside.
|
||
|
* The different address mapping is handled by the s3c24xx.h files below.
|
||
|
*/
|
||
|
|
||
|
#include <common.h>
|
||
|
|
||
|
#ifdef CONFIG_DRIVER_S3C24X0_I2C
|
||
|
|
||
|
#if defined(CONFIG_S3C2400)
|
||
|
#include <s3c2400.h>
|
||
|
#elif defined(CONFIG_S3C2410)
|
||
|
#include <s3c2410.h>
|
||
|
#endif
|
||
|
#include <i2c.h>
|
||
|
|
||
|
#ifdef CONFIG_HARD_I2C
|
||
|
|
||
|
#define IIC_WRITE 0
|
||
|
#define IIC_READ 1
|
||
|
|
||
|
#define IIC_OK 0
|
||
|
#define IIC_NOK 1
|
||
|
#define IIC_NACK 2
|
||
|
#define IIC_NOK_LA 3 /* Lost arbitration */
|
||
|
#define IIC_NOK_TOUT 4 /* time out */
|
||
|
|
||
|
#define IICSTAT_BSY 0x20 /* Busy bit */
|
||
|
#define IICSTAT_NACK 0x01 /* Nack bit */
|
||
|
#define IICCON_IRPND 0x10 /* Interrupt pending bit */
|
||
|
#define IIC_MODE_MT 0xC0 /* Master Transmit Mode */
|
||
|
#define IIC_MODE_MR 0x80 /* Master Receive Mode */
|
||
|
#define IIC_START_STOP 0x20 /* START / STOP */
|
||
|
#define IIC_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
|
||
|
|
||
|
#define IIC_TIMEOUT 1 /* 1 seconde */
|
||
|
|
||
|
|
||
|
static int GetIICSDA(void)
|
||
|
{
|
||
|
return (rGPEDAT & 0x8000) >> 15;
|
||
|
}
|
||
|
|
||
|
static void SetIICSDA(int x)
|
||
|
{
|
||
|
rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
|
||
|
}
|
||
|
|
||
|
static void SetIICSCL(int x)
|
||
|
{
|
||
|
rGPEDAT = (rGPEDAT & ~0x4000) | (x&1) << 14;
|
||
|
}
|
||
|
|
||
|
|
||
|
static int WaitForXfer(void)
|
||
|
{
|
||
|
int i, status;
|
||
|
|
||
|
i = IIC_TIMEOUT * 1000;
|
||
|
status = rIICCON;
|
||
|
while ((i > 0) && !(status & IICCON_IRPND)) {
|
||
|
udelay(1000);
|
||
|
status = rIICCON;
|
||
|
i--;
|
||
|
}
|
||
|
|
||
|
return(status & IICCON_IRPND) ? IIC_OK : IIC_NOK_TOUT;
|
||
|
}
|
||
|
|
||
|
static int IsACK(void)
|
||
|
{
|
||
|
return(!(rIICSTAT & IICSTAT_NACK));
|
||
|
}
|
||
|
|
||
|
static void ReadWriteByte(void)
|
||
|
{
|
||
|
rIICCON &= ~IICCON_IRPND;
|
||
|
}
|
||
|
|
||
|
void i2c_init (int speed, int slaveadd)
|
||
|
{
|
||
|
ulong freq, pres = 16, div;
|
||
|
int i, status;
|
||
|
|
||
|
/* wait for some time to give previous transfer a chance to finish */
|
||
|
|
||
|
i = IIC_TIMEOUT * 1000;
|
||
|
status = rIICSTAT;
|
||
|
while ((i > 0) && (status & IICSTAT_BSY)) {
|
||
|
udelay(1000);
|
||
|
status = rIICSTAT;
|
||
|
i--;
|
||
|
}
|
||
|
|
||
|
if ((status & IICSTAT_BSY) || GetIICSDA() == 0) {
|
||
|
ulong old_gpecon = rGPECON;
|
||
|
/* bus still busy probably by (most) previously interrupted transfer */
|
||
|
|
||
|
/* set IICSDA and IICSCL (GPE15, GPE14) to GPIO */
|
||
|
rGPECON = (rGPECON & ~0xF0000000) | 0x10000000;
|
||
|
|
||
|
/* toggle IICSCL until bus idle */
|
||
|
SetIICSCL(0); udelay(1000);
|
||
|
i = 10;
|
||
|
while ((i > 0) && (GetIICSDA() != 1)) {
|
||
|
SetIICSCL(1); udelay(1000);
|
||
|
SetIICSCL(0); udelay(1000);
|
||
|
i--;
|
||
|
}
|
||
|
SetIICSCL(1); udelay(1000);
|
||
|
|
||
|
/* restore pin functions */
|
||
|
rGPECON = old_gpecon;
|
||
|
}
|
||
|
|
||
|
/* calculate prescaler and divisor values */
|
||
|
freq = get_PCLK();
|
||
|
if ((freq / pres / (16+1)) > speed)
|
||
|
/* set prescaler to 512 */
|
||
|
pres = 512;
|
||
|
|
||
|
div = 0;
|
||
|
while ((freq / pres / (div+1)) > speed)
|
||
|
div++;
|
||
|
|
||
|
/* set prescaler, divisor according to freq, also set
|
||
|
ACKGEN, IRQ */
|
||
|
rIICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
|
||
|
|
||
|
/* init to SLAVE REVEIVE and set slaveaddr */
|
||
|
rIICSTAT = 0;
|
||
|
rIICADD = slaveadd;
|
||
|
/* program Master Transmit (and implicit STOP) */
|
||
|
rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA;
|
||
|
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
cmd_type is 0 for write 1 for read.
|
||
|
|
||
|
addr_len can take any value from 0-255, it is only limited
|
||
|
by the char, we could make it larger if needed. If it is
|
||
|
0 we skip the address write cycle.
|
||
|
|
||
|
*/
|
||
|
static
|
||
|
int i2c_transfer(unsigned char cmd_type,
|
||
|
unsigned char chip,
|
||
|
unsigned char addr[],
|
||
|
unsigned char addr_len,
|
||
|
unsigned char data[],
|
||
|
unsigned short data_len)
|
||
|
{
|
||
|
int i, status, result;
|
||
|
|
||
|
if (data == 0 || data_len == 0) {
|
||
|
/*Don't support data transfer of no length or to address 0*/
|
||
|
printf( "i2c_transfer: bad call\n" );
|
||
|
return IIC_NOK;
|
||
|
}
|
||
|
|
||
|
//CheckDelay();
|
||
|
|
||
|
/* Check I2C bus idle */
|
||
|
i = IIC_TIMEOUT * 1000;
|
||
|
status = rIICSTAT;
|
||
|
while ((i > 0) && (status & IICSTAT_BSY)) {
|
||
|
udelay(1000);
|
||
|
status = rIICSTAT;
|
||
|
i--;
|
||
|
}
|
||
|
|
||
|
|
||
|
if (status & IICSTAT_BSY) {
|
||
|
result = IIC_NOK_TOUT;
|
||
|
return(result);
|
||
|
}
|
||
|
|
||
|
rIICCON |= 0x80;
|
||
|
|
||
|
result = IIC_OK;
|
||
|
|
||
|
switch (cmd_type) {
|
||
|
case IIC_WRITE:
|
||
|
if (addr && addr_len) {
|
||
|
rIICDS = chip;
|
||
|
/* send START */
|
||
|
rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA | IIC_START_STOP;
|
||
|
i = 0;
|
||
|
while ((i < addr_len) && (result == IIC_OK)) {
|
||
|
result = WaitForXfer();
|
||
|
rIICDS = addr[i];
|
||
|
ReadWriteByte();
|
||
|
i++;
|
||
|
}
|
||
|
i = 0;
|
||
|
while ((i < data_len) && (result == IIC_OK)) {
|
||
|
result = WaitForXfer();
|
||
|
rIICDS = data[i];
|
||
|
ReadWriteByte();
|
||
|
i++;
|
||
|
}
|
||
|
} else {
|
||
|
rIICDS = chip;
|
||
|
/* send START */
|
||
|
rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA | IIC_START_STOP;
|
||
|
i = 0;
|
||
|
while ((i < data_len) && (result = IIC_OK)) {
|
||
|
result = WaitForXfer();
|
||
|
rIICDS = data[i];
|
||
|
ReadWriteByte();
|
||
|
i++;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (result == IIC_OK)
|
||
|
result = WaitForXfer();
|
||
|
|
||
|
/* send STOP */
|
||
|
rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA;
|
||
|
ReadWriteByte();
|
||
|
break;
|
||
|
|
||
|
case IIC_READ:
|
||
|
if (addr && addr_len) {
|
||
|
rIICSTAT = IIC_MODE_MT | IIC_TXRX_ENA;
|
||
|
rIICDS = chip;
|
||
|
/* send START */
|
||
|
rIICSTAT |= IIC_START_STOP;
|
||
|
result = WaitForXfer();
|
||
|
if (IsACK()) {
|
||
|
i = 0;
|
||
|
while ((i < addr_len) && (result == IIC_OK)) {
|
||
|
rIICDS = addr[i];
|
||
|
ReadWriteByte();
|
||
|
result = WaitForXfer();
|
||
|
i++;
|
||
|
}
|
||
|
|
||
|
rIICDS = chip;
|
||
|
/* resend START */
|
||
|
rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA | IIC_START_STOP;
|
||
|
ReadWriteByte();
|
||
|
result = WaitForXfer();
|
||
|
i = 0;
|
||
|
while ((i < data_len) && (result == IIC_OK)) {
|
||
|
/* disable ACK for final READ */
|
||
|
if (i == data_len - 1)
|
||
|
rIICCON &= ~0x80;
|
||
|
ReadWriteByte();
|
||
|
result = WaitForXfer();
|
||
|
data[i] = rIICDS;
|
||
|
i++;
|
||
|
}
|
||
|
} else {
|
||
|
result = IIC_NACK;
|
||
|
}
|
||
|
|
||
|
} else {
|
||
|
rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA;
|
||
|
rIICDS = chip;
|
||
|
/* send START */
|
||
|
rIICSTAT |= IIC_START_STOP;
|
||
|
result = WaitForXfer();
|
||
|
|
||
|
if (IsACK()) {
|
||
|
i = 0;
|
||
|
while ((i < data_len) && (result == IIC_OK)) {
|
||
|
/* disable ACK for final READ */
|
||
|
if (i == data_len - 1)
|
||
|
rIICCON &= ~0x80;
|
||
|
ReadWriteByte();
|
||
|
result = WaitForXfer();
|
||
|
data[i] = rIICDS;
|
||
|
i++;
|
||
|
}
|
||
|
} else {
|
||
|
result = IIC_NACK;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* send STOP */
|
||
|
rIICSTAT = IIC_MODE_MR | IIC_TXRX_ENA;
|
||
|
ReadWriteByte();
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
printf( "i2c_transfer: bad call\n" );
|
||
|
result = IIC_NOK;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return (result);
|
||
|
}
|
||
|
|
||
|
int i2c_probe (uchar chip)
|
||
|
{
|
||
|
uchar buf[1];
|
||
|
|
||
|
buf[0] = 0;
|
||
|
|
||
|
/*
|
||
|
* What is needed is to send the chip address and verify that the
|
||
|
* address was <ACK>ed (i.e. there was a chip at that address which
|
||
|
* drove the data line low).
|
||
|
*/
|
||
|
return(i2c_transfer (IIC_READ, chip << 1, 0, 0, buf, 1) != IIC_OK);
|
||
|
}
|
||
|
|
||
|
int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
|
||
|
{
|
||
|
uchar xaddr[4];
|
||
|
int ret;
|
||
|
|
||
|
if ( alen > 4 ) {
|
||
|
printf ("I2C read: addr len %d not supported\n", alen);
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
if ( alen > 0 ) {
|
||
|
xaddr[0] = (addr >> 24) & 0xFF;
|
||
|
xaddr[1] = (addr >> 16) & 0xFF;
|
||
|
xaddr[2] = (addr >> 8) & 0xFF;
|
||
|
xaddr[3] = addr & 0xFF;
|
||
|
}
|
||
|
|
||
|
|
||
|
#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
|
||
|
/*
|
||
|
* EEPROM chips that implement "address overflow" are ones
|
||
|
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
|
||
|
* address and the extra bits end up in the "chip address"
|
||
|
* bit slots. This makes a 24WC08 (1Kbyte) chip look like
|
||
|
* four 256 byte chips.
|
||
|
*
|
||
|
* Note that we consider the length of the address field to
|
||
|
* still be one byte because the extra address bits are
|
||
|
* hidden in the chip address.
|
||
|
*/
|
||
|
if( alen > 0 )
|
||
|
chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
|
||
|
#endif
|
||
|
if( (ret = i2c_transfer(IIC_READ, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
|
||
|
printf( "I2c read: failed %d\n", ret);
|
||
|
return 1;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
|
||
|
{
|
||
|
uchar xaddr[4];
|
||
|
|
||
|
if ( alen > 4 ) {
|
||
|
printf ("I2C write: addr len %d not supported\n", alen);
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
if ( alen > 0 ) {
|
||
|
xaddr[0] = (addr >> 24) & 0xFF;
|
||
|
xaddr[1] = (addr >> 16) & 0xFF;
|
||
|
xaddr[2] = (addr >> 8) & 0xFF;
|
||
|
xaddr[3] = addr & 0xFF;
|
||
|
}
|
||
|
|
||
|
#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
|
||
|
/*
|
||
|
* EEPROM chips that implement "address overflow" are ones
|
||
|
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
|
||
|
* address and the extra bits end up in the "chip address"
|
||
|
* bit slots. This makes a 24WC08 (1Kbyte) chip look like
|
||
|
* four 256 byte chips.
|
||
|
*
|
||
|
* Note that we consider the length of the address field to
|
||
|
* still be one byte because the extra address bits are
|
||
|
* hidden in the chip address.
|
||
|
*/
|
||
|
if( alen > 0 )
|
||
|
chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
|
||
|
#endif
|
||
|
return (i2c_transfer(IIC_WRITE, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
|
||
|
}
|
||
|
|
||
|
#endif /* CONFIG_HARD_I2C */
|
||
|
|
||
|
#endif /* CONFIG_DRIVER_S3C24X0_I2C */
|