u-boot-brain/include/configs/puma_rk3399.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
 */

#ifndef __PUMA_RK3399_H
#define __PUMA_RK3399_H

#include <configs/rk3399_common.h>

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 1
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
#endif

#define SDRAM_BANK_SIZE			(2UL << 30)

#define CONFIG_SERIAL_TAG
#define CONFIG_ENV_OVERWRITE

#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP

#endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-07 06:58:06 +09:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-04-08 02:13:38 +09:00			`/*`
			`* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH`
			`*/`

			`#ifndef __PUMA_RK3399_H`
			`#define __PUMA_RK3399_H`

			`#include <configs/rk3399_common.h>`

rockchip: board: puma_rk3399: make env location selectable via Kconfig The environment storage location is selectable via Kconfig. We support eMMC, SD and SPI-NOR as location for U-Boot. This adds support to store the environment in the SPI-NOR additional to the default eMMC location. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> 2017-11-07 07:02:56 +09:00			`#if defined(CONFIG_ENV_IS_IN_MMC)`
rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-04-08 02:13:38 +09:00			`#define CONFIG_SYS_MMC_ENV_DEV 1`
rockchip: board: puma_rk3399: make env location selectable via Kconfig The environment storage location is selectable via Kconfig. We support eMMC, SD and SPI-NOR as location for U-Boot. This adds support to store the environment in the SPI-NOR additional to the default eMMC location. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> 2017-11-07 07:02:56 +09:00			`#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)`
			`#define CONFIG_ENV_SECT_SIZE (8 * 1024)`
			`#endif`
rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-04-08 02:13:38 +09:00
			`#define SDRAM_BANK_SIZE (2UL << 30)`

rockchip: board: puma_rk3399: add support for serial# and cpuid# via efuses With our efuse driver for the RK3399 ready, we can add the board-specific code that consumes the cpuid from the efuse block and postprocesses it into the system serial (using the same CRC32 based derivation as in Linux). We expose the cpuid via two distinct environment variables: serial# - the serial number, as derived in Linux cpuid# - the raw 16 byte CPU id field from the fuse block Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org> 2017-05-06 02:21:39 +09:00			`#define CONFIG_SERIAL_TAG`
			`#define CONFIG_ENV_OVERWRITE`

rockchip: board: puma_rk3399: enable BMP_16BPP, BMP_24BPP and BMP_32BPP With video output support for the RK3399-Q7 (Puma) available, we want CMD_BMP enabled and the support for 16bit, 24bit and 32bit BMPs defined. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Version-changes: 2 - enable SYS_WHITE_ON_BLACK via defconfig Reviewed-by: Simon Glass <sjg@chromium.org> 2017-06-01 00:59:36 +09:00			`#define CONFIG_BMP_16BPP`
			`#define CONFIG_BMP_24BPP`
			`#define CONFIG_BMP_32BPP`

rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-04-08 02:13:38 +09:00			`#endif`