mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 23:48:52 +09:00
55 lines
1.9 KiB
Plaintext
55 lines
1.9 KiB
Plaintext
![]() |
* Exynos 5250 DWC_mobile_storage
|
||
|
|
||
|
The Exynos 5250 provides DWC_mobile_storage interface which supports
|
||
|
. Embedded Multimedia Cards (EMMC-version 4.5)
|
||
|
. Secure Digital memory (SD mem-version 2.0)
|
||
|
. Secure Digital I/O (SDIO-version 3.0)
|
||
|
. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
|
||
|
|
||
|
The Exynos 5250 DWC_mobile_storage provides four channels.
|
||
|
SOC specific and Board specific properties are channel specific.
|
||
|
|
||
|
Required SoC Specific Properties:
|
||
|
|
||
|
- compatible: should be
|
||
|
- samsung,exynos5250-dwmmc: for exynos5250 platforms
|
||
|
|
||
|
- reg: physical base address of the controller and length of memory mapped
|
||
|
region.
|
||
|
|
||
|
- interrupts: The interrupt number to the cpu.
|
||
|
|
||
|
Required Board Specific Properties:
|
||
|
|
||
|
- #address-cells: should be 1.
|
||
|
- #size-cells: should be 0.
|
||
|
- samsung,bus-width: The width of the bus used to interface the devices
|
||
|
supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO).
|
||
|
. Typically the bus width is 4 or 8.
|
||
|
- samsung,timing: The timing values to be written into the
|
||
|
Drv/sample clock selection register of corresponding channel.
|
||
|
. It is comprised of 3 values corresponding to the 3 fileds
|
||
|
'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register.
|
||
|
. SelClk_sample: Select sample clock among 8 shifted clocks.
|
||
|
. SelClk_drv: Select drv clock among 8 shifted clocks.
|
||
|
. DIVRATIO: Clock Divide ratio select.
|
||
|
. The above 3 values are used by the clock phase shifter.
|
||
|
|
||
|
Example:
|
||
|
|
||
|
mmc@12200000 {
|
||
|
samsung,bus-width = <8>;
|
||
|
samsung,timing = <1 3 3>;
|
||
|
samsung,removable = <1>;
|
||
|
}
|
||
|
In the above example,
|
||
|
. The bus width is 8
|
||
|
. Timing is comprised of 3 values as explained below
|
||
|
1 - SelClk_sample
|
||
|
3 - SelClk_drv
|
||
|
3 - DIVRATIO
|
||
|
. The 'removable' flag indicates whether the the particilar device
|
||
|
cannot be removed (always present) or it is a removable device.
|
||
|
1 - Indicates that the device is removable.
|
||
|
0 - Indicates that the device cannot be removed.
|