u-boot-brain/board/freescale/t4rdb/t4_sd_rcw.cfg

#PBL preamble and RCW header
aa55aa55 010e0100
#serdes protocol  27_55_1_9
16070019 18101916 00000000 00000000
6c6e0848 00448c00 6c020000 f5000000
00000000 ee0000ee 00000000 000307fc
00000000 00000000 00000000 00000028
powerpc/85xx: Add T4240RDB board support T4240RDB board Specification ---------------------------- Memory subsystem: 6GB DDR3 128MB NOR flash 2GB NAND flash Ethernet: Eight 1G SGMII ports Four 10Gbps SFP+ ports PCIe: Two PCIe slots USB: Two USB2.0 Type A ports SDHC: One SD-card port SATA: One SATA port UART: Dual RJ45 ports Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: fix CONFIG_SYS_QE_FMAN_FW_ADDR in T4240RDB.h] 2014-04-14 19:42:06 +09:00			`#PBL preamble and RCW header`
			`aa55aa55 010e0100`
powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW SerDes 2 protocol 56 is not valid any longer due to the new RCW; protocol 55 is used instead, so add SerDes 2 protocol 55 to align with RCW. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 2014-12-10 21:00:39 +09:00			`#serdes protocol 27_55_1_9`
powerpc/85xx: Add T4240RDB board support T4240RDB board Specification ---------------------------- Memory subsystem: 6GB DDR3 128MB NOR flash 2GB NAND flash Ethernet: Eight 1G SGMII ports Four 10Gbps SFP+ ports PCIe: Two PCIe slots USB: Two USB2.0 Type A ports SDHC: One SD-card port SATA: One SATA port UART: Dual RJ45 ports Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: fix CONFIG_SYS_QE_FMAN_FW_ADDR in T4240RDB.h] 2014-04-14 19:42:06 +09:00			`16070019 18101916 00000000 00000000`
Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand. T series boards use unified RCW for sd, spi and nand boot. Now split txxx_rcw.cfg to txxx_sd_rcw.cfg, txxx_spi_rcw.cfg and txxx_nand_rcw.cfg for SPI/NAND/SD boot. And modify RCW[PBI_SRC] for them: PBI_SRC=5 for SPI 24-bit addressing PBI_SRC=6 for SD boot PBI_SRC=14 for IFC NAND boot Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com> 2016-09-08 13:55:32 +09:00			`6c6e0848 00448c00 6c020000 f5000000`
powerpc/t4rdb: Add SD boot support for T4240RDB board This patch adds SD boot support for T4240RDB board. SPL framework is used. PBL initializes the internal RAM and copies SPL to it. Then SPL initializes DDR using SPD and copies u-boot from SD card to DDR, finally SPL transfers control to u-boot. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: Fix T4240RDB_SDCARD_defcofig] Reviewed-by: York Sun <yorksun@freescale.com> 2015-03-20 18:08:54 +09:00			`00000000 ee0000ee 00000000 000307fc`
			`00000000 00000000 00000000 00000028`