mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 23:36:23 +09:00
54a702f705
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.
Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped
A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.
.SECONDARY
Prerequisites of this special target are treated as intermediate
files but are never automatically deleted.
.PRECIOUS
When make is interrupted during execution, it may delete the target
file it is updating if the file was modified since make started.
If you mark the file as precious, make will never delete the file
if interrupted.
Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.
The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.
Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.
.PRECIOUS: $(obj)/%.lex.c
works, but
.SECONDARY: $(obj)/%.lex.c
has no effect. However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.
The targets specified as .SECONDARY must be explicit. $(targets)
contains all targets that need to include .*.cmd files. So, the
intermediates you want to keep are mostly in there. Therefore, mark
$(targets) as .SECONDARY. It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.
I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
598 lines
19 KiB
Makefile
598 lines
19 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
# ==========================================================================
|
|
# Building
|
|
# ==========================================================================
|
|
|
|
src := $(obj)
|
|
|
|
PHONY := __build
|
|
__build:
|
|
|
|
# Init all relevant variables used in kbuild files so
|
|
# 1) they have correct type
|
|
# 2) they do not inherit any value from the environment
|
|
obj-y :=
|
|
obj-m :=
|
|
lib-y :=
|
|
lib-m :=
|
|
always :=
|
|
targets :=
|
|
subdir-y :=
|
|
subdir-m :=
|
|
EXTRA_AFLAGS :=
|
|
EXTRA_CFLAGS :=
|
|
EXTRA_CPPFLAGS :=
|
|
EXTRA_LDFLAGS :=
|
|
asflags-y :=
|
|
ccflags-y :=
|
|
cppflags-y :=
|
|
ldflags-y :=
|
|
|
|
subdir-asflags-y :=
|
|
subdir-ccflags-y :=
|
|
|
|
# Read auto.conf if it exists, otherwise ignore
|
|
-include include/config/auto.conf
|
|
|
|
include scripts/Kbuild.include
|
|
|
|
# For backward compatibility check that these variables do not change
|
|
save-cflags := $(CFLAGS)
|
|
|
|
# The filename Kbuild has precedence over Makefile
|
|
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
|
|
kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
|
|
include $(kbuild-file)
|
|
|
|
# If the save-* variables changed error out
|
|
ifeq ($(KBUILD_NOPEDANTIC),)
|
|
ifneq ("$(save-cflags)","$(CFLAGS)")
|
|
$(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
|
|
endif
|
|
endif
|
|
|
|
include scripts/Makefile.lib
|
|
|
|
ifdef host-progs
|
|
ifneq ($(hostprogs-y),$(host-progs))
|
|
$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
|
|
hostprogs-y += $(host-progs)
|
|
endif
|
|
endif
|
|
|
|
# Do not include host rules unless needed
|
|
ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
|
|
include scripts/Makefile.host
|
|
endif
|
|
|
|
ifndef obj
|
|
$(warning kbuild: Makefile.build is included improperly)
|
|
endif
|
|
|
|
# ===========================================================================
|
|
|
|
ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
|
|
lib-target := $(obj)/lib.a
|
|
real-obj-y += $(obj)/lib-ksyms.o
|
|
endif
|
|
|
|
ifneq ($(strip $(real-obj-y) $(need-builtin)),)
|
|
builtin-target := $(obj)/built-in.a
|
|
endif
|
|
|
|
modorder-target := $(obj)/modules.order
|
|
|
|
# We keep a list of all modules in $(MODVERDIR)
|
|
|
|
__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
|
|
$(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
|
|
$(subdir-ym) $(always)
|
|
@:
|
|
|
|
# Linus' kernel sanity checking tool
|
|
ifneq ($(KBUILD_CHECKSRC),0)
|
|
ifeq ($(KBUILD_CHECKSRC),2)
|
|
quiet_cmd_force_checksrc = CHECK $<
|
|
cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
|
|
else
|
|
quiet_cmd_checksrc = CHECK $<
|
|
cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),)
|
|
cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $< ;
|
|
endif
|
|
|
|
# Do section mismatch analysis for each module/built-in.a
|
|
ifdef CONFIG_DEBUG_SECTION_MISMATCH
|
|
cmd_secanalysis = ; scripts/mod/modpost $@
|
|
endif
|
|
|
|
# Compile C sources (.c)
|
|
# ---------------------------------------------------------------------------
|
|
|
|
# Default is built-in, unless we know otherwise
|
|
modkern_cflags = \
|
|
$(if $(part-of-module), \
|
|
$(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
|
|
$(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
|
|
quiet_modtag := $(empty) $(empty)
|
|
|
|
$(real-obj-m) : part-of-module := y
|
|
$(real-obj-m:.o=.i) : part-of-module := y
|
|
$(real-obj-m:.o=.s) : part-of-module := y
|
|
$(real-obj-m:.o=.lst): part-of-module := y
|
|
|
|
$(real-obj-m) : quiet_modtag := [M]
|
|
$(real-obj-m:.o=.i) : quiet_modtag := [M]
|
|
$(real-obj-m:.o=.s) : quiet_modtag := [M]
|
|
$(real-obj-m:.o=.lst): quiet_modtag := [M]
|
|
|
|
$(obj-m) : quiet_modtag := [M]
|
|
|
|
quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
|
|
cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
|
|
|
|
$(obj)/%.s: $(src)/%.c FORCE
|
|
$(call if_changed_dep,cc_s_c)
|
|
|
|
quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
|
|
cmd_cpp_i_c = $(CPP) $(c_flags) -o $@ $<
|
|
|
|
$(obj)/%.i: $(src)/%.c FORCE
|
|
$(call if_changed_dep,cpp_i_c)
|
|
|
|
# These mirror gensymtypes_S and co below, keep them in synch.
|
|
cmd_gensymtypes_c = \
|
|
$(CPP) -D__GENKSYMS__ $(c_flags) $< | \
|
|
$(GENKSYMS) $(if $(1), -T $(2)) \
|
|
$(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \
|
|
$(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \
|
|
$(if $(KBUILD_PRESERVE),-p) \
|
|
-r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
|
|
|
|
quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
|
|
cmd_cc_symtypes_c = \
|
|
set -e; \
|
|
$(call cmd_gensymtypes_c,true,$@) >/dev/null; \
|
|
test -s $@ || rm -f $@
|
|
|
|
$(obj)/%.symtypes : $(src)/%.c FORCE
|
|
$(call cmd,cc_symtypes_c)
|
|
|
|
# LLVM assembly
|
|
# Generate .ll files from .c
|
|
quiet_cmd_cc_ll_c = CC $(quiet_modtag) $@
|
|
cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $<
|
|
|
|
$(obj)/%.ll: $(src)/%.c FORCE
|
|
$(call if_changed_dep,cc_ll_c)
|
|
|
|
# C (.c) files
|
|
# The C file is compiled and updated dependency information is generated.
|
|
# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
|
|
|
|
quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
|
|
|
|
ifndef CONFIG_MODVERSIONS
|
|
cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
|
|
|
|
else
|
|
# When module versioning is enabled the following steps are executed:
|
|
# o compile a .tmp_<file>.o from <file>.c
|
|
# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
|
|
# not export symbols, we just rename .tmp_<file>.o to <file>.o and
|
|
# are done.
|
|
# o otherwise, we calculate symbol versions using the good old
|
|
# genksyms on the preprocessed source and postprocess them in a way
|
|
# that they are usable as a linker script
|
|
# o generate <file>.o from .tmp_<file>.o using the linker to
|
|
# replace the unresolved symbols __crc_exported_symbol with
|
|
# the actual value of the checksum generated by genksyms
|
|
|
|
cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
|
|
|
|
cmd_modversions_c = \
|
|
if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
|
|
$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
|
|
> $(@D)/.tmp_$(@F:.o=.ver); \
|
|
\
|
|
$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
|
|
-T $(@D)/.tmp_$(@F:.o=.ver); \
|
|
rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
|
|
else \
|
|
mv -f $(@D)/.tmp_$(@F) $@; \
|
|
fi;
|
|
endif
|
|
|
|
ifdef CONFIG_FTRACE_MCOUNT_RECORD
|
|
ifdef BUILD_C_RECORDMCOUNT
|
|
ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
|
|
RECORDMCOUNT_FLAGS = -w
|
|
endif
|
|
# Due to recursion, we must skip empty.o.
|
|
# The empty.o file is created in the make process in order to determine
|
|
# the target endianness and word size. It is made before all other C
|
|
# files, including recordmcount.
|
|
sub_cmd_record_mcount = \
|
|
if [ $(@) != "scripts/mod/empty.o" ]; then \
|
|
$(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
|
|
fi;
|
|
recordmcount_source := $(srctree)/scripts/recordmcount.c \
|
|
$(srctree)/scripts/recordmcount.h
|
|
else
|
|
sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
|
|
"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
|
|
"$(if $(CONFIG_64BIT),64,32)" \
|
|
"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
|
|
"$(LD)" "$(NM)" "$(RM)" "$(MV)" \
|
|
"$(if $(part-of-module),1,0)" "$(@)";
|
|
recordmcount_source := $(srctree)/scripts/recordmcount.pl
|
|
endif # BUILD_C_RECORDMCOUNT
|
|
cmd_record_mcount = \
|
|
if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \
|
|
"$(CC_FLAGS_FTRACE)" ]; then \
|
|
$(sub_cmd_record_mcount) \
|
|
fi;
|
|
endif # CONFIG_FTRACE_MCOUNT_RECORD
|
|
|
|
ifdef CONFIG_STACK_VALIDATION
|
|
ifneq ($(SKIP_STACK_VALIDATION),1)
|
|
|
|
__objtool_obj := $(objtree)/tools/objtool/objtool
|
|
|
|
objtool_args = $(if $(CONFIG_UNWINDER_ORC),orc generate,check)
|
|
|
|
objtool_args += $(if $(part-of-module), --module,)
|
|
|
|
ifndef CONFIG_FRAME_POINTER
|
|
objtool_args += --no-fp
|
|
endif
|
|
ifdef CONFIG_GCOV_KERNEL
|
|
objtool_args += --no-unreachable
|
|
else
|
|
objtool_args += $(call cc-ifversion, -lt, 0405, --no-unreachable)
|
|
endif
|
|
ifdef CONFIG_RETPOLINE
|
|
ifneq ($(RETPOLINE_CFLAGS),)
|
|
objtool_args += --retpoline
|
|
endif
|
|
endif
|
|
|
|
|
|
ifdef CONFIG_MODVERSIONS
|
|
objtool_o = $(@D)/.tmp_$(@F)
|
|
else
|
|
objtool_o = $(@)
|
|
endif
|
|
|
|
# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
|
|
# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
|
|
# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
|
|
cmd_objtool = $(if $(patsubst y%,, \
|
|
$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
|
|
$(__objtool_obj) $(objtool_args) "$(objtool_o)";)
|
|
objtool_obj = $(if $(patsubst y%,, \
|
|
$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
|
|
$(__objtool_obj))
|
|
|
|
endif # SKIP_STACK_VALIDATION
|
|
endif # CONFIG_STACK_VALIDATION
|
|
|
|
# Rebuild all objects when objtool changes, or is enabled/disabled.
|
|
objtool_dep = $(objtool_obj) \
|
|
$(wildcard include/config/orc/unwinder.h \
|
|
include/config/stack/validation.h)
|
|
|
|
define rule_cc_o_c
|
|
$(call echo-cmd,checksrc) $(cmd_checksrc) \
|
|
$(call cmd_and_fixdep,cc_o_c) \
|
|
$(cmd_checkdoc) \
|
|
$(call echo-cmd,objtool) $(cmd_objtool) \
|
|
$(cmd_modversions_c) \
|
|
$(call echo-cmd,record_mcount) $(cmd_record_mcount)
|
|
endef
|
|
|
|
define rule_as_o_S
|
|
$(call cmd_and_fixdep,as_o_S) \
|
|
$(call echo-cmd,objtool) $(cmd_objtool) \
|
|
$(cmd_modversions_S)
|
|
endef
|
|
|
|
# List module undefined symbols (or empty line if not enabled)
|
|
ifdef CONFIG_TRIM_UNUSED_KSYMS
|
|
cmd_undef_syms = $(NM) $@ | sed -n 's/^ *U //p' | xargs echo
|
|
else
|
|
cmd_undef_syms = echo
|
|
endif
|
|
|
|
# Built-in and composite module parts
|
|
$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
|
|
$(call cmd,force_checksrc)
|
|
$(call if_changed_rule,cc_o_c)
|
|
|
|
# Single-part modules are special since we need to mark them in $(MODVERDIR)
|
|
|
|
$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
|
|
$(call cmd,force_checksrc)
|
|
$(call if_changed_rule,cc_o_c)
|
|
@{ echo $(@:.o=.ko); echo $@; \
|
|
$(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
|
|
|
|
quiet_cmd_cc_lst_c = MKLST $@
|
|
cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
|
|
$(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
|
|
System.map $(OBJDUMP) > $@
|
|
|
|
$(obj)/%.lst: $(src)/%.c FORCE
|
|
$(call if_changed_dep,cc_lst_c)
|
|
|
|
# Compile assembler sources (.S)
|
|
# ---------------------------------------------------------------------------
|
|
|
|
modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
|
|
|
|
$(real-obj-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
|
|
$(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
|
|
|
|
# .S file exports must have their C prototypes defined in asm/asm-prototypes.h
|
|
# or a file that it includes, in order to get versioned symbols. We build a
|
|
# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
|
|
# the .S file (with trailing ';'), and run genksyms on that, to extract vers.
|
|
#
|
|
# This is convoluted. The .S file must first be preprocessed to run guards and
|
|
# expand names, then the resulting exports must be constructed into plain
|
|
# EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
|
|
# to make the genksyms input.
|
|
#
|
|
# These mirror gensymtypes_c and co above, keep them in synch.
|
|
cmd_gensymtypes_S = \
|
|
(echo "\#include <linux/kernel.h>" ; \
|
|
echo "\#include <asm/asm-prototypes.h>" ; \
|
|
$(CPP) $(a_flags) $< | \
|
|
grep "\<___EXPORT_SYMBOL\>" | \
|
|
sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \
|
|
$(CPP) -D__GENKSYMS__ $(c_flags) -xc - | \
|
|
$(GENKSYMS) $(if $(1), -T $(2)) \
|
|
$(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \
|
|
$(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \
|
|
$(if $(KBUILD_PRESERVE),-p) \
|
|
-r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
|
|
|
|
quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
|
|
cmd_cc_symtypes_S = \
|
|
set -e; \
|
|
$(call cmd_gensymtypes_S,true,$@) >/dev/null; \
|
|
test -s $@ || rm -f $@
|
|
|
|
$(obj)/%.symtypes : $(src)/%.S FORCE
|
|
$(call cmd,cc_symtypes_S)
|
|
|
|
|
|
quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
|
|
cmd_cpp_s_S = $(CPP) $(a_flags) -o $@ $<
|
|
|
|
$(obj)/%.s: $(src)/%.S FORCE
|
|
$(call if_changed_dep,cpp_s_S)
|
|
|
|
quiet_cmd_as_o_S = AS $(quiet_modtag) $@
|
|
|
|
ifndef CONFIG_MODVERSIONS
|
|
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
|
|
|
|
else
|
|
|
|
ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h)
|
|
|
|
ifeq ($(ASM_PROTOTYPES),)
|
|
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
|
|
|
|
else
|
|
|
|
# versioning matches the C process described above, with difference that
|
|
# we parse asm-prototypes.h C header to get function definitions.
|
|
|
|
cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $<
|
|
|
|
cmd_modversions_S = \
|
|
if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
|
|
$(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
|
|
> $(@D)/.tmp_$(@F:.o=.ver); \
|
|
\
|
|
$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
|
|
-T $(@D)/.tmp_$(@F:.o=.ver); \
|
|
rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
|
|
else \
|
|
mv -f $(@D)/.tmp_$(@F) $@; \
|
|
fi;
|
|
endif
|
|
endif
|
|
|
|
$(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE
|
|
$(call if_changed_rule,as_o_S)
|
|
|
|
targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
|
|
targets += $(extra-y) $(MAKECMDGOALS) $(always)
|
|
|
|
# Linker scripts preprocessor (.lds.S -> .lds)
|
|
# ---------------------------------------------------------------------------
|
|
quiet_cmd_cpp_lds_S = LDS $@
|
|
cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
|
|
-D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
|
|
|
|
$(obj)/%.lds: $(src)/%.lds.S FORCE
|
|
$(call if_changed_dep,cpp_lds_S)
|
|
|
|
# ASN.1 grammar
|
|
# ---------------------------------------------------------------------------
|
|
quiet_cmd_asn1_compiler = ASN.1 $@
|
|
cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
|
|
$(subst .h,.c,$@) $(subst .c,.h,$@)
|
|
|
|
$(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
|
|
$(call cmd,asn1_compiler)
|
|
|
|
# Build the compiled-in targets
|
|
# ---------------------------------------------------------------------------
|
|
|
|
# To build objects in subdirs, we need to descend into the directories
|
|
$(sort $(subdir-obj-y)): $(subdir-ym) ;
|
|
|
|
#
|
|
# Rule to compile a set of .o files into one .o file
|
|
#
|
|
ifdef builtin-target
|
|
|
|
# built-in.a archives are made with no symbol table or index which
|
|
# makes them small and fast, but unable to be used by the linker.
|
|
# scripts/link-vmlinux.sh builds an aggregate built-in.a with a symbol
|
|
# table and index.
|
|
quiet_cmd_ar_builtin = AR $@
|
|
cmd_ar_builtin = rm -f $@; \
|
|
$(AR) rcSTP$(KBUILD_ARFLAGS) $@ $(filter $(real-obj-y), $^)
|
|
|
|
$(builtin-target): $(real-obj-y) FORCE
|
|
$(call if_changed,ar_builtin)
|
|
|
|
targets += $(builtin-target)
|
|
endif # builtin-target
|
|
|
|
#
|
|
# Rule to create modules.order file
|
|
#
|
|
# Create commands to either record .ko file or cat modules.order from
|
|
# a subdirectory
|
|
modorder-cmds = \
|
|
$(foreach m, $(modorder), \
|
|
$(if $(filter %/modules.order, $m), \
|
|
cat $m;, echo kernel/$m;))
|
|
|
|
$(modorder-target): $(subdir-ym) FORCE
|
|
$(Q)(cat /dev/null; $(modorder-cmds)) > $@
|
|
|
|
#
|
|
# Rule to compile a set of .o files into one .a file
|
|
#
|
|
ifdef lib-target
|
|
quiet_cmd_link_l_target = AR $@
|
|
|
|
# lib target archives do get a symbol table and index
|
|
cmd_link_l_target = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(lib-y)
|
|
|
|
$(lib-target): $(lib-y) FORCE
|
|
$(call if_changed,link_l_target)
|
|
|
|
targets += $(lib-target)
|
|
|
|
dummy-object = $(obj)/.lib_exports.o
|
|
ksyms-lds = $(dot-target).lds
|
|
ifdef CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
|
|
ref_prefix = EXTERN(_
|
|
else
|
|
ref_prefix = EXTERN(
|
|
endif
|
|
|
|
quiet_cmd_export_list = EXPORTS $@
|
|
cmd_export_list = $(OBJDUMP) -h $< | \
|
|
sed -ne '/___ksymtab/s/.*+\([^ ]*\).*/$(ref_prefix)\1)/p' >$(ksyms-lds);\
|
|
rm -f $(dummy-object);\
|
|
echo | $(CC) $(a_flags) -c -o $(dummy-object) -x assembler -;\
|
|
$(LD) $(ld_flags) -r -o $@ -T $(ksyms-lds) $(dummy-object);\
|
|
rm $(dummy-object) $(ksyms-lds)
|
|
|
|
$(obj)/lib-ksyms.o: $(lib-target) FORCE
|
|
$(call if_changed,export_list)
|
|
|
|
targets += $(obj)/lib-ksyms.o
|
|
|
|
endif
|
|
|
|
#
|
|
# Rule to link composite objects
|
|
#
|
|
# Composite objects are specified in kbuild makefile as follows:
|
|
# <composite-object>-objs := <list of .o files>
|
|
# or
|
|
# <composite-object>-y := <list of .o files>
|
|
# or
|
|
# <composite-object>-m := <list of .o files>
|
|
# The -m syntax only works if <composite object> is a module
|
|
link_multi_deps = \
|
|
$(filter $(addprefix $(obj)/, \
|
|
$($(subst $(obj)/,,$(@:.o=-objs))) \
|
|
$($(subst $(obj)/,,$(@:.o=-y))) \
|
|
$($(subst $(obj)/,,$(@:.o=-m)))), $^)
|
|
|
|
quiet_cmd_link_multi-m = LD [M] $@
|
|
cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
|
|
|
|
$(multi-used-m): FORCE
|
|
$(call if_changed,link_multi-m)
|
|
@{ echo $(@:.o=.ko); echo $(link_multi_deps); \
|
|
$(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
|
|
$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
|
|
|
|
targets += $(multi-used-m)
|
|
targets := $(filter-out $(PHONY), $(targets))
|
|
|
|
# Add intermediate targets:
|
|
# When building objects with specific suffix patterns, add intermediate
|
|
# targets that the final targets are derived from.
|
|
intermediate_targets = $(foreach sfx, $(2), \
|
|
$(patsubst %$(strip $(1)),%$(sfx), \
|
|
$(filter %$(strip $(1)), $(targets))))
|
|
# %.asn1.o <- %.asn1.[ch] <- %.asn1
|
|
# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
|
|
# %.lex.o <- %.lex.c <- %.l
|
|
# %.tab.o <- %.tab.[ch] <- %.y
|
|
targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
|
|
$(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
|
|
$(call intermediate_targets, .lex.o, .lex.c) \
|
|
$(call intermediate_targets, .tab.o, .tab.c .tab.h)
|
|
|
|
# Descending
|
|
# ---------------------------------------------------------------------------
|
|
|
|
PHONY += $(subdir-ym)
|
|
$(subdir-ym):
|
|
$(Q)$(MAKE) $(build)=$@ need-builtin=$(if $(findstring $@,$(subdir-obj-y)),1)
|
|
|
|
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
|
|
# ---------------------------------------------------------------------------
|
|
|
|
PHONY += FORCE
|
|
|
|
FORCE:
|
|
|
|
# Read all saved command lines and dependencies for the $(targets) we
|
|
# may be building above, using $(if_changed{,_dep}). As an
|
|
# optimization, we don't need to read them if the target does not
|
|
# exist, we will rebuild anyway in that case.
|
|
|
|
cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
|
|
|
|
ifneq ($(cmd_files),)
|
|
include $(cmd_files)
|
|
endif
|
|
|
|
ifneq ($(KBUILD_SRC),)
|
|
# Create directories for object files if they do not exist
|
|
obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
|
|
# If cmd_files exist, their directories apparently exist. Skip mkdir.
|
|
exist-dirs := $(sort $(patsubst %/,%, $(dir $(cmd_files))))
|
|
obj-dirs := $(strip $(filter-out $(exist-dirs), $(obj-dirs)))
|
|
ifneq ($(obj-dirs),)
|
|
$(shell mkdir -p $(obj-dirs))
|
|
endif
|
|
endif
|
|
|
|
# Some files contained in $(targets) are intermediate artifacts.
|
|
# We never want them to be removed automatically.
|
|
.SECONDARY: $(targets)
|
|
|
|
# Declare the contents of the .PHONY variable as phony. We keep that
|
|
# information in a variable se we can use it in if_changed and friends.
|
|
|
|
.PHONY: $(PHONY)
|