linux-brain/drivers/net/bonding/bond_main.c
Taehee Yoo ab92d68fc2 net: core: add generic lockdep keys
Some interface types could be nested.
(VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..)
These interface types should set lockdep class because, without lockdep
class key, lockdep always warn about unexisting circular locking.

In the current code, these interfaces have their own lockdep class keys and
these manage itself. So that there are so many duplicate code around the
/driver/net and /net/.
This patch adds new generic lockdep keys and some helper functions for it.

This patch does below changes.
a) Add lockdep class keys in struct net_device
   - qdisc_running, xmit, addr_list, qdisc_busylock
   - these keys are used as dynamic lockdep key.
b) When net_device is being allocated, lockdep keys are registered.
   - alloc_netdev_mqs()
c) When net_device is being free'd llockdep keys are unregistered.
   - free_netdev()
d) Add generic lockdep key helper function
   - netdev_register_lockdep_key()
   - netdev_unregister_lockdep_key()
   - netdev_update_lockdep_key()
e) Remove unnecessary generic lockdep macro and functions
f) Remove unnecessary lockdep code of each interfaces.

After this patch, each interface modules don't need to maintain
their lockdep keys.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24 14:53:48 -07:00

4936 lines
137 KiB
C

/*
* originally based on the dummy device.
*
* Copyright 1999, Thomas Davis, tadavis@lbl.gov.
* Licensed under the GPL. Based on dummy.c, and eql.c devices.
*
* bonding.c: an Ethernet Bonding driver
*
* This is useful to talk to a Cisco EtherChannel compatible equipment:
* Cisco 5500
* Sun Trunking (Solaris)
* Alteon AceDirector Trunks
* Linux Bonding
* and probably many L2 switches ...
*
* How it works:
* ifconfig bond0 ipaddress netmask up
* will setup a network device, with an ip address. No mac address
* will be assigned at this time. The hw mac address will come from
* the first slave bonded to the channel. All slaves will then use
* this hw mac address.
*
* ifconfig bond0 down
* will release all slaves, marking them as down.
*
* ifenslave bond0 eth0
* will attach eth0 to bond0 as a slave. eth0 hw mac address will either
* a: be used as initial mac address
* b: if a hw mac address already is there, eth0's hw mac address
* will then be set from bond0.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <net/ip.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/socket.h>
#include <linux/ctype.h>
#include <linux/inet.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <asm/dma.h>
#include <linux/uaccess.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/igmp.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <linux/rtnetlink.h>
#include <linux/smp.h>
#include <linux/if_ether.h>
#include <net/arp.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/if_bonding.h>
#include <linux/jiffies.h>
#include <linux/preempt.h>
#include <net/route.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <net/pkt_sched.h>
#include <linux/rculist.h>
#include <net/flow_dissector.h>
#include <net/bonding.h>
#include <net/bond_3ad.h>
#include <net/bond_alb.h>
#include "bonding_priv.h"
/*---------------------------- Module parameters ----------------------------*/
/* monitor all links that often (in milliseconds). <=0 disables monitoring */
static int max_bonds = BOND_DEFAULT_MAX_BONDS;
static int tx_queues = BOND_DEFAULT_TX_QUEUES;
static int num_peer_notif = 1;
static int miimon;
static int updelay;
static int downdelay;
static int use_carrier = 1;
static char *mode;
static char *primary;
static char *primary_reselect;
static char *lacp_rate;
static int min_links;
static char *ad_select;
static char *xmit_hash_policy;
static int arp_interval;
static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
static char *arp_validate;
static char *arp_all_targets;
static char *fail_over_mac;
static int all_slaves_active;
static struct bond_params bonding_defaults;
static int resend_igmp = BOND_DEFAULT_RESEND_IGMP;
static int packets_per_slave = 1;
static int lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL;
module_param(max_bonds, int, 0);
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
module_param(tx_queues, int, 0);
MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
module_param_named(num_grat_arp, num_peer_notif, int, 0644);
MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on "
"failover event (alias of num_unsol_na)");
module_param_named(num_unsol_na, num_peer_notif, int, 0644);
MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on "
"failover event (alias of num_grat_arp)");
module_param(miimon, int, 0);
MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
module_param(updelay, int, 0);
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
module_param(downdelay, int, 0);
MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
"in milliseconds");
module_param(use_carrier, int, 0);
MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
"0 for off, 1 for on (default)");
module_param(mode, charp, 0);
MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
"1 for active-backup, 2 for balance-xor, "
"3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
"6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
module_param(primary_reselect, charp, 0);
MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
"once it comes up; "
"0 for always (default), "
"1 for only if speed of primary is "
"better, "
"2 for only on active slave "
"failure");
module_param(lacp_rate, charp, 0);
MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; "
"0 for slow, 1 for fast");
module_param(ad_select, charp, 0);
MODULE_PARM_DESC(ad_select, "802.3ad aggregation selection logic; "
"0 for stable (default), 1 for bandwidth, "
"2 for count");
module_param(min_links, int, 0);
MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier");
module_param(xmit_hash_policy, charp, 0);
MODULE_PARM_DESC(xmit_hash_policy, "balance-alb, balance-tlb, balance-xor, 802.3ad hashing method; "
"0 for layer 2 (default), 1 for layer 3+4, "
"2 for layer 2+3, 3 for encap layer 2+3, "
"4 for encap layer 3+4");
module_param(arp_interval, int, 0);
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
module_param_array(arp_ip_target, charp, NULL, 0);
MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
module_param(arp_validate, charp, 0);
MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; "
"0 for none (default), 1 for active, "
"2 for backup, 3 for all");
module_param(arp_all_targets, charp, 0);
MODULE_PARM_DESC(arp_all_targets, "fail on any/all arp targets timeout; 0 for any (default), 1 for all");
module_param(fail_over_mac, charp, 0);
MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to "
"the same MAC; 0 for none (default), "
"1 for active, 2 for follow");
module_param(all_slaves_active, int, 0);
MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface "
"by setting active flag for all slaves; "
"0 for never (default), 1 for always.");
module_param(resend_igmp, int, 0);
MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on "
"link failure");
module_param(packets_per_slave, int, 0);
MODULE_PARM_DESC(packets_per_slave, "Packets to send per slave in balance-rr "
"mode; 0 for a random slave, 1 packet per "
"slave (default), >1 packets per slave.");
module_param(lp_interval, uint, 0);
MODULE_PARM_DESC(lp_interval, "The number of seconds between instances where "
"the bonding driver sends learning packets to "
"each slaves peer switch. The default is 1.");
/*----------------------------- Global variables ----------------------------*/
#ifdef CONFIG_NET_POLL_CONTROLLER
atomic_t netpoll_block_tx = ATOMIC_INIT(0);
#endif
unsigned int bond_net_id __read_mostly;
/*-------------------------- Forward declarations ---------------------------*/
static int bond_init(struct net_device *bond_dev);
static void bond_uninit(struct net_device *bond_dev);
static void bond_get_stats(struct net_device *bond_dev,
struct rtnl_link_stats64 *stats);
static void bond_slave_arr_handler(struct work_struct *work);
static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act,
int mod);
static void bond_netdev_notify_work(struct work_struct *work);
/*---------------------------- General routines -----------------------------*/
const char *bond_mode_name(int mode)
{
static const char *names[] = {
[BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)",
[BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
[BOND_MODE_XOR] = "load balancing (xor)",
[BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
[BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
[BOND_MODE_TLB] = "transmit load balancing",
[BOND_MODE_ALB] = "adaptive load balancing",
};
if (mode < BOND_MODE_ROUNDROBIN || mode > BOND_MODE_ALB)
return "unknown";
return names[mode];
}
/*---------------------------------- VLAN -----------------------------------*/
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
*
* @bond: bond device that got this skb for tx.
* @skb: hw accel VLAN tagged skb to transmit
* @slave_dev: slave that is supposed to xmit this skbuff
*/
void bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
struct net_device *slave_dev)
{
skb->dev = slave_dev;
BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping));
skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping);
if (unlikely(netpoll_tx_running(bond->dev)))
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
else
dev_queue_xmit(skb);
}
/* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
* We don't protect the slave list iteration with a lock because:
* a. This operation is performed in IOCTL context,
* b. The operation is protected by the RTNL semaphore in the 8021q code,
* c. Holding a lock with BH disabled while directly calling a base driver
* entry point is generally a BAD idea.
*
* The design of synchronization/protection for this operation in the 8021q
* module is good for one or more VLAN devices over a single physical device
* and cannot be extended for a teaming solution like bonding, so there is a
* potential race condition here where a net device from the vlan group might
* be referenced (either by a base driver or the 8021q code) while it is being
* removed from the system. However, it turns out we're not making matters
* worse, and if it works for regular VLAN usage it will work here too.
*/
/**
* bond_vlan_rx_add_vid - Propagates adding an id to slaves
* @bond_dev: bonding net device that got called
* @vid: vlan id being added
*/
static int bond_vlan_rx_add_vid(struct net_device *bond_dev,
__be16 proto, u16 vid)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *rollback_slave;
struct list_head *iter;
int res;
bond_for_each_slave(bond, slave, iter) {
res = vlan_vid_add(slave->dev, proto, vid);
if (res)
goto unwind;
}
return 0;
unwind:
/* unwind to the slave that failed */
bond_for_each_slave(bond, rollback_slave, iter) {
if (rollback_slave == slave)
break;
vlan_vid_del(rollback_slave->dev, proto, vid);
}
return res;
}
/**
* bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
* @bond_dev: bonding net device that got called
* @vid: vlan id being removed
*/
static int bond_vlan_rx_kill_vid(struct net_device *bond_dev,
__be16 proto, u16 vid)
{
struct bonding *bond = netdev_priv(bond_dev);
struct list_head *iter;
struct slave *slave;
bond_for_each_slave(bond, slave, iter)
vlan_vid_del(slave->dev, proto, vid);
if (bond_is_lb(bond))
bond_alb_clear_vlan(bond, vid);
return 0;
}
/*------------------------------- Link status -------------------------------*/
/* Set the carrier state for the master according to the state of its
* slaves. If any slaves are up, the master is up. In 802.3ad mode,
* do special 802.3ad magic.
*
* Returns zero if carrier state does not change, nonzero if it does.
*/
int bond_set_carrier(struct bonding *bond)
{
struct list_head *iter;
struct slave *slave;
if (!bond_has_slaves(bond))
goto down;
if (BOND_MODE(bond) == BOND_MODE_8023AD)
return bond_3ad_set_carrier(bond);
bond_for_each_slave(bond, slave, iter) {
if (slave->link == BOND_LINK_UP) {
if (!netif_carrier_ok(bond->dev)) {
netif_carrier_on(bond->dev);
return 1;
}
return 0;
}
}
down:
if (netif_carrier_ok(bond->dev)) {
netif_carrier_off(bond->dev);
return 1;
}
return 0;
}
/* Get link speed and duplex from the slave's base driver
* using ethtool. If for some reason the call fails or the
* values are invalid, set speed and duplex to -1,
* and return. Return 1 if speed or duplex settings are
* UNKNOWN; 0 otherwise.
*/
static int bond_update_speed_duplex(struct slave *slave)
{
struct net_device *slave_dev = slave->dev;
struct ethtool_link_ksettings ecmd;
int res;
slave->speed = SPEED_UNKNOWN;
slave->duplex = DUPLEX_UNKNOWN;
res = __ethtool_get_link_ksettings(slave_dev, &ecmd);
if (res < 0)
return 1;
if (ecmd.base.speed == 0 || ecmd.base.speed == ((__u32)-1))
return 1;
switch (ecmd.base.duplex) {
case DUPLEX_FULL:
case DUPLEX_HALF:
break;
default:
return 1;
}
slave->speed = ecmd.base.speed;
slave->duplex = ecmd.base.duplex;
return 0;
}
const char *bond_slave_link_status(s8 link)
{
switch (link) {
case BOND_LINK_UP:
return "up";
case BOND_LINK_FAIL:
return "going down";
case BOND_LINK_DOWN:
return "down";
case BOND_LINK_BACK:
return "going back";
default:
return "unknown";
}
}
/* if <dev> supports MII link status reporting, check its link status.
*
* We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
* depending upon the setting of the use_carrier parameter.
*
* Return either BMSR_LSTATUS, meaning that the link is up (or we
* can't tell and just pretend it is), or 0, meaning that the link is
* down.
*
* If reporting is non-zero, instead of faking link up, return -1 if
* both ETHTOOL and MII ioctls fail (meaning the device does not
* support them). If use_carrier is set, return whatever it says.
* It'd be nice if there was a good way to tell if a driver supports
* netif_carrier, but there really isn't.
*/
static int bond_check_dev_link(struct bonding *bond,
struct net_device *slave_dev, int reporting)
{
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
int (*ioctl)(struct net_device *, struct ifreq *, int);
struct ifreq ifr;
struct mii_ioctl_data *mii;
if (!reporting && !netif_running(slave_dev))
return 0;
if (bond->params.use_carrier)
return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
/* Try to get link status using Ethtool first. */
if (slave_dev->ethtool_ops->get_link)
return slave_dev->ethtool_ops->get_link(slave_dev) ?
BMSR_LSTATUS : 0;
/* Ethtool can't be used, fallback to MII ioctls. */
ioctl = slave_ops->ndo_do_ioctl;
if (ioctl) {
/* TODO: set pointer to correct ioctl on a per team member
* bases to make this more efficient. that is, once
* we determine the correct ioctl, we will always
* call it and not the others for that team
* member.
*/
/* We cannot assume that SIOCGMIIPHY will also read a
* register; not all network drivers (e.g., e100)
* support that.
*/
/* Yes, the mii is overlaid on the ifreq.ifr_ifru */
strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
mii = if_mii(&ifr);
if (ioctl(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
mii->reg_num = MII_BMSR;
if (ioctl(slave_dev, &ifr, SIOCGMIIREG) == 0)
return mii->val_out & BMSR_LSTATUS;
}
}
/* If reporting, report that either there's no dev->do_ioctl,
* or both SIOCGMIIREG and get_link failed (meaning that we
* cannot report link status). If not reporting, pretend
* we're ok.
*/
return reporting ? -1 : BMSR_LSTATUS;
}
/*----------------------------- Multicast list ------------------------------*/
/* Push the promiscuity flag down to appropriate slaves */
static int bond_set_promiscuity(struct bonding *bond, int inc)
{
struct list_head *iter;
int err = 0;
if (bond_uses_primary(bond)) {
struct slave *curr_active = rtnl_dereference(bond->curr_active_slave);
if (curr_active)
err = dev_set_promiscuity(curr_active->dev, inc);
} else {
struct slave *slave;
bond_for_each_slave(bond, slave, iter) {
err = dev_set_promiscuity(slave->dev, inc);
if (err)
return err;
}
}
return err;
}
/* Push the allmulti flag down to all slaves */
static int bond_set_allmulti(struct bonding *bond, int inc)
{
struct list_head *iter;
int err = 0;
if (bond_uses_primary(bond)) {
struct slave *curr_active = rtnl_dereference(bond->curr_active_slave);
if (curr_active)
err = dev_set_allmulti(curr_active->dev, inc);
} else {
struct slave *slave;
bond_for_each_slave(bond, slave, iter) {
err = dev_set_allmulti(slave->dev, inc);
if (err)
return err;
}
}
return err;
}
/* Retrieve the list of registered multicast addresses for the bonding
* device and retransmit an IGMP JOIN request to the current active
* slave.
*/
static void bond_resend_igmp_join_requests_delayed(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
mcast_work.work);
if (!rtnl_trylock()) {
queue_delayed_work(bond->wq, &bond->mcast_work, 1);
return;
}
call_netdevice_notifiers(NETDEV_RESEND_IGMP, bond->dev);
if (bond->igmp_retrans > 1) {
bond->igmp_retrans--;
queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
}
rtnl_unlock();
}
/* Flush bond's hardware addresses from slave */
static void bond_hw_addr_flush(struct net_device *bond_dev,
struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
dev_uc_unsync(slave_dev, bond_dev);
dev_mc_unsync(slave_dev, bond_dev);
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
/* del lacpdu mc addr from mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
dev_mc_del(slave_dev, lacpdu_multicast);
}
}
/*--------------------------- Active slave change ---------------------------*/
/* Update the hardware address list and promisc/allmulti for the new and
* old active slaves (if any). Modes that are not using primary keep all
* slaves up date at all times; only the modes that use primary need to call
* this function to swap these settings during a failover.
*/
static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active,
struct slave *old_active)
{
if (old_active) {
if (bond->dev->flags & IFF_PROMISC)
dev_set_promiscuity(old_active->dev, -1);
if (bond->dev->flags & IFF_ALLMULTI)
dev_set_allmulti(old_active->dev, -1);
bond_hw_addr_flush(bond->dev, old_active->dev);
}
if (new_active) {
/* FIXME: Signal errors upstream. */
if (bond->dev->flags & IFF_PROMISC)
dev_set_promiscuity(new_active->dev, 1);
if (bond->dev->flags & IFF_ALLMULTI)
dev_set_allmulti(new_active->dev, 1);
netif_addr_lock_bh(bond->dev);
dev_uc_sync(new_active->dev, bond->dev);
dev_mc_sync(new_active->dev, bond->dev);
netif_addr_unlock_bh(bond->dev);
}
}
/**
* bond_set_dev_addr - clone slave's address to bond
* @bond_dev: bond net device
* @slave_dev: slave net device
*
* Should be called with RTNL held.
*/
static int bond_set_dev_addr(struct net_device *bond_dev,
struct net_device *slave_dev)
{
int err;
slave_dbg(bond_dev, slave_dev, "bond_dev=%p slave_dev=%p slave_dev->addr_len=%d\n",
bond_dev, slave_dev, slave_dev->addr_len);
err = dev_pre_changeaddr_notify(bond_dev, slave_dev->dev_addr, NULL);
if (err)
return err;
memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
bond_dev->addr_assign_type = NET_ADDR_STOLEN;
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev);
return 0;
}
static struct slave *bond_get_old_active(struct bonding *bond,
struct slave *new_active)
{
struct slave *slave;
struct list_head *iter;
bond_for_each_slave(bond, slave, iter) {
if (slave == new_active)
continue;
if (ether_addr_equal(bond->dev->dev_addr, slave->dev->dev_addr))
return slave;
}
return NULL;
}
/* bond_do_fail_over_mac
*
* Perform special MAC address swapping for fail_over_mac settings
*
* Called with RTNL
*/
static void bond_do_fail_over_mac(struct bonding *bond,
struct slave *new_active,
struct slave *old_active)
{
u8 tmp_mac[MAX_ADDR_LEN];
struct sockaddr_storage ss;
int rv;
switch (bond->params.fail_over_mac) {
case BOND_FOM_ACTIVE:
if (new_active) {
rv = bond_set_dev_addr(bond->dev, new_active->dev);
if (rv)
slave_err(bond->dev, new_active->dev, "Error %d setting bond MAC from slave\n",
-rv);
}
break;
case BOND_FOM_FOLLOW:
/* if new_active && old_active, swap them
* if just old_active, do nothing (going to no active slave)
* if just new_active, set new_active to bond's MAC
*/
if (!new_active)
return;
if (!old_active)
old_active = bond_get_old_active(bond, new_active);
if (old_active) {
bond_hw_addr_copy(tmp_mac, new_active->dev->dev_addr,
new_active->dev->addr_len);
bond_hw_addr_copy(ss.__data,
old_active->dev->dev_addr,
old_active->dev->addr_len);
ss.ss_family = new_active->dev->type;
} else {
bond_hw_addr_copy(ss.__data, bond->dev->dev_addr,
bond->dev->addr_len);
ss.ss_family = bond->dev->type;
}
rv = dev_set_mac_address(new_active->dev,
(struct sockaddr *)&ss, NULL);
if (rv) {
slave_err(bond->dev, new_active->dev, "Error %d setting MAC of new active slave\n",
-rv);
goto out;
}
if (!old_active)
goto out;
bond_hw_addr_copy(ss.__data, tmp_mac,
new_active->dev->addr_len);
ss.ss_family = old_active->dev->type;
rv = dev_set_mac_address(old_active->dev,
(struct sockaddr *)&ss, NULL);
if (rv)
slave_err(bond->dev, old_active->dev, "Error %d setting MAC of old active slave\n",
-rv);
out:
break;
default:
netdev_err(bond->dev, "bond_do_fail_over_mac impossible: bad policy %d\n",
bond->params.fail_over_mac);
break;
}
}
static struct slave *bond_choose_primary_or_current(struct bonding *bond)
{
struct slave *prim = rtnl_dereference(bond->primary_slave);
struct slave *curr = rtnl_dereference(bond->curr_active_slave);
if (!prim || prim->link != BOND_LINK_UP) {
if (!curr || curr->link != BOND_LINK_UP)
return NULL;
return curr;
}
if (bond->force_primary) {
bond->force_primary = false;
return prim;
}
if (!curr || curr->link != BOND_LINK_UP)
return prim;
/* At this point, prim and curr are both up */
switch (bond->params.primary_reselect) {
case BOND_PRI_RESELECT_ALWAYS:
return prim;
case BOND_PRI_RESELECT_BETTER:
if (prim->speed < curr->speed)
return curr;
if (prim->speed == curr->speed && prim->duplex <= curr->duplex)
return curr;
return prim;
case BOND_PRI_RESELECT_FAILURE:
return curr;
default:
netdev_err(bond->dev, "impossible primary_reselect %d\n",
bond->params.primary_reselect);
return curr;
}
}
/**
* bond_find_best_slave - select the best available slave to be the active one
* @bond: our bonding struct
*/
static struct slave *bond_find_best_slave(struct bonding *bond)
{
struct slave *slave, *bestslave = NULL;
struct list_head *iter;
int mintime = bond->params.updelay;
slave = bond_choose_primary_or_current(bond);
if (slave)
return slave;
bond_for_each_slave(bond, slave, iter) {
if (slave->link == BOND_LINK_UP)
return slave;
if (slave->link == BOND_LINK_BACK && bond_slave_is_up(slave) &&
slave->delay < mintime) {
mintime = slave->delay;
bestslave = slave;
}
}
return bestslave;
}
static bool bond_should_notify_peers(struct bonding *bond)
{
struct slave *slave;
rcu_read_lock();
slave = rcu_dereference(bond->curr_active_slave);
rcu_read_unlock();
netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
slave ? slave->dev->name : "NULL");
if (!slave || !bond->send_peer_notif ||
bond->send_peer_notif %
max(1, bond->params.peer_notif_delay) != 0 ||
!netif_carrier_ok(bond->dev) ||
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
return false;
return true;
}
/**
* change_active_interface - change the active slave into the specified one
* @bond: our bonding struct
* @new: the new slave to make the active one
*
* Set the new slave to the bond's settings and unset them on the old
* curr_active_slave.
* Setting include flags, mc-list, promiscuity, allmulti, etc.
*
* If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
* because it is apparently the best available slave we have, even though its
* updelay hasn't timed out yet.
*
* Caller must hold RTNL.
*/
void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
{
struct slave *old_active;
ASSERT_RTNL();
old_active = rtnl_dereference(bond->curr_active_slave);
if (old_active == new_active)
return;
if (new_active) {
new_active->last_link_up = jiffies;
if (new_active->link == BOND_LINK_BACK) {
if (bond_uses_primary(bond)) {
slave_info(bond->dev, new_active->dev, "making interface the new active one %d ms earlier\n",
(bond->params.updelay - new_active->delay) * bond->params.miimon);
}
new_active->delay = 0;
bond_set_slave_link_state(new_active, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
if (bond_is_lb(bond))
bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
} else {
if (bond_uses_primary(bond)) {
slave_info(bond->dev, new_active->dev, "making interface the new active one\n");
}
}
}
if (bond_uses_primary(bond))
bond_hw_addr_swap(bond, new_active, old_active);
if (bond_is_lb(bond)) {
bond_alb_handle_active_change(bond, new_active);
if (old_active)
bond_set_slave_inactive_flags(old_active,
BOND_SLAVE_NOTIFY_NOW);
if (new_active)
bond_set_slave_active_flags(new_active,
BOND_SLAVE_NOTIFY_NOW);
} else {
rcu_assign_pointer(bond->curr_active_slave, new_active);
}
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) {
if (old_active)
bond_set_slave_inactive_flags(old_active,
BOND_SLAVE_NOTIFY_NOW);
if (new_active) {
bool should_notify_peers = false;
bond_set_slave_active_flags(new_active,
BOND_SLAVE_NOTIFY_NOW);
if (bond->params.fail_over_mac)
bond_do_fail_over_mac(bond, new_active,
old_active);
if (netif_running(bond->dev)) {
bond->send_peer_notif =
bond->params.num_peer_notif *
max(1, bond->params.peer_notif_delay);
should_notify_peers =
bond_should_notify_peers(bond);
}
call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, bond->dev);
if (should_notify_peers) {
bond->send_peer_notif--;
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS,
bond->dev);
}
}
}
/* resend IGMP joins since active slave has changed or
* all were sent on curr_active_slave.
* resend only if bond is brought up with the affected
* bonding modes and the retransmission is enabled
*/
if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
((bond_uses_primary(bond) && new_active) ||
BOND_MODE(bond) == BOND_MODE_ROUNDROBIN)) {
bond->igmp_retrans = bond->params.resend_igmp;
queue_delayed_work(bond->wq, &bond->mcast_work, 1);
}
}
/**
* bond_select_active_slave - select a new active slave, if needed
* @bond: our bonding struct
*
* This functions should be called when one of the following occurs:
* - The old curr_active_slave has been released or lost its link.
* - The primary_slave has got its link back.
* - A slave has got its link back and there's no old curr_active_slave.
*
* Caller must hold RTNL.
*/
void bond_select_active_slave(struct bonding *bond)
{
struct slave *best_slave;
int rv;
ASSERT_RTNL();
best_slave = bond_find_best_slave(bond);
if (best_slave != rtnl_dereference(bond->curr_active_slave)) {
bond_change_active_slave(bond, best_slave);
rv = bond_set_carrier(bond);
if (!rv)
return;
if (netif_carrier_ok(bond->dev))
netdev_info(bond->dev, "active interface up!\n");
else
netdev_info(bond->dev, "now running without any active interface!\n");
}
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static inline int slave_enable_netpoll(struct slave *slave)
{
struct netpoll *np;
int err = 0;
np = kzalloc(sizeof(*np), GFP_KERNEL);
err = -ENOMEM;
if (!np)
goto out;
err = __netpoll_setup(np, slave->dev);
if (err) {
kfree(np);
goto out;
}
slave->np = np;
out:
return err;
}
static inline void slave_disable_netpoll(struct slave *slave)
{
struct netpoll *np = slave->np;
if (!np)
return;
slave->np = NULL;
__netpoll_free(np);
}
static void bond_poll_controller(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave = NULL;
struct list_head *iter;
struct ad_info ad_info;
if (BOND_MODE(bond) == BOND_MODE_8023AD)
if (bond_3ad_get_active_agg_info(bond, &ad_info))
return;
bond_for_each_slave_rcu(bond, slave, iter) {
if (!bond_slave_is_up(slave))
continue;
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct aggregator *agg =
SLAVE_AD_INFO(slave)->port.aggregator;
if (agg &&
agg->aggregator_identifier != ad_info.aggregator_id)
continue;
}
netpoll_poll_dev(slave->dev);
}
}
static void bond_netpoll_cleanup(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct list_head *iter;
struct slave *slave;
bond_for_each_slave(bond, slave, iter)
if (bond_slave_is_up(slave))
slave_disable_netpoll(slave);
}
static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni)
{
struct bonding *bond = netdev_priv(dev);
struct list_head *iter;
struct slave *slave;
int err = 0;
bond_for_each_slave(bond, slave, iter) {
err = slave_enable_netpoll(slave);
if (err) {
bond_netpoll_cleanup(dev);
break;
}
}
return err;
}
#else
static inline int slave_enable_netpoll(struct slave *slave)
{
return 0;
}
static inline void slave_disable_netpoll(struct slave *slave)
{
}
static void bond_netpoll_cleanup(struct net_device *bond_dev)
{
}
#endif
/*---------------------------------- IOCTL ----------------------------------*/
static netdev_features_t bond_fix_features(struct net_device *dev,
netdev_features_t features)
{
struct bonding *bond = netdev_priv(dev);
struct list_head *iter;
netdev_features_t mask;
struct slave *slave;
mask = features;
features &= ~NETIF_F_ONE_FOR_ALL;
features |= NETIF_F_ALL_FOR_ALL;
bond_for_each_slave(bond, slave, iter) {
features = netdev_increment_features(features,
slave->dev->features,
mask);
}
features = netdev_add_tso_features(features, mask);
return features;
}
#define BOND_VLAN_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
NETIF_F_HIGHDMA | NETIF_F_LRO)
#define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_RXCSUM | NETIF_F_ALL_TSO)
#define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_ALL_TSO)
static void bond_compute_features(struct bonding *bond)
{
unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
IFF_XMIT_DST_RELEASE_PERM;
netdev_features_t vlan_features = BOND_VLAN_FEATURES;
netdev_features_t enc_features = BOND_ENC_FEATURES;
netdev_features_t mpls_features = BOND_MPLS_FEATURES;
struct net_device *bond_dev = bond->dev;
struct list_head *iter;
struct slave *slave;
unsigned short max_hard_header_len = ETH_HLEN;
unsigned int gso_max_size = GSO_MAX_SIZE;
u16 gso_max_segs = GSO_MAX_SEGS;
if (!bond_has_slaves(bond))
goto done;
vlan_features &= NETIF_F_ALL_FOR_ALL;
mpls_features &= NETIF_F_ALL_FOR_ALL;
bond_for_each_slave(bond, slave, iter) {
vlan_features = netdev_increment_features(vlan_features,
slave->dev->vlan_features, BOND_VLAN_FEATURES);
enc_features = netdev_increment_features(enc_features,
slave->dev->hw_enc_features,
BOND_ENC_FEATURES);
mpls_features = netdev_increment_features(mpls_features,
slave->dev->mpls_features,
BOND_MPLS_FEATURES);
dst_release_flag &= slave->dev->priv_flags;
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
}
bond_dev->hard_header_len = max_hard_header_len;
done:
bond_dev->vlan_features = vlan_features;
bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_STAG_TX |
NETIF_F_GSO_UDP_L4;
bond_dev->mpls_features = mpls_features;
bond_dev->gso_max_segs = gso_max_segs;
netif_set_gso_max_size(bond_dev, gso_max_size);
bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
if ((bond_dev->priv_flags & IFF_XMIT_DST_RELEASE_PERM) &&
dst_release_flag == (IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM))
bond_dev->priv_flags |= IFF_XMIT_DST_RELEASE;
netdev_change_features(bond_dev);
}
static void bond_setup_by_slave(struct net_device *bond_dev,
struct net_device *slave_dev)
{
bond_dev->header_ops = slave_dev->header_ops;
bond_dev->type = slave_dev->type;
bond_dev->hard_header_len = slave_dev->hard_header_len;
bond_dev->addr_len = slave_dev->addr_len;
memcpy(bond_dev->broadcast, slave_dev->broadcast,
slave_dev->addr_len);
}
/* On bonding slaves other than the currently active slave, suppress
* duplicates except for alb non-mcast/bcast.
*/
static bool bond_should_deliver_exact_match(struct sk_buff *skb,
struct slave *slave,
struct bonding *bond)
{
if (bond_is_slave_inactive(slave)) {
if (BOND_MODE(bond) == BOND_MODE_ALB &&
skb->pkt_type != PACKET_BROADCAST &&
skb->pkt_type != PACKET_MULTICAST)
return false;
return true;
}
return false;
}
static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
{
struct sk_buff *skb = *pskb;
struct slave *slave;
struct bonding *bond;
int (*recv_probe)(const struct sk_buff *, struct bonding *,
struct slave *);
int ret = RX_HANDLER_ANOTHER;
skb = skb_share_check(skb, GFP_ATOMIC);
if (unlikely(!skb))
return RX_HANDLER_CONSUMED;
*pskb = skb;
slave = bond_slave_get_rcu(skb->dev);
bond = slave->bond;
recv_probe = READ_ONCE(bond->recv_probe);
if (recv_probe) {
ret = recv_probe(skb, bond, slave);
if (ret == RX_HANDLER_CONSUMED) {
consume_skb(skb);
return ret;
}
}
/*
* For packets determined by bond_should_deliver_exact_match() call to
* be suppressed we want to make an exception for link-local packets.
* This is necessary for e.g. LLDP daemons to be able to monitor
* inactive slave links without being forced to bind to them
* explicitly.
*
* At the same time, packets that are passed to the bonding master
* (including link-local ones) can have their originating interface
* determined via PACKET_ORIGDEV socket option.
*/
if (bond_should_deliver_exact_match(skb, slave, bond)) {
if (is_link_local_ether_addr(eth_hdr(skb)->h_dest))
return RX_HANDLER_PASS;
return RX_HANDLER_EXACT;
}
skb->dev = bond->dev;
if (BOND_MODE(bond) == BOND_MODE_ALB &&
bond->dev->priv_flags & IFF_BRIDGE_PORT &&
skb->pkt_type == PACKET_HOST) {
if (unlikely(skb_cow_head(skb,
skb->data - skb_mac_header(skb)))) {
kfree_skb(skb);
return RX_HANDLER_CONSUMED;
}
bond_hw_addr_copy(eth_hdr(skb)->h_dest, bond->dev->dev_addr,
bond->dev->addr_len);
}
return ret;
}
static enum netdev_lag_tx_type bond_lag_tx_type(struct bonding *bond)
{
switch (BOND_MODE(bond)) {
case BOND_MODE_ROUNDROBIN:
return NETDEV_LAG_TX_TYPE_ROUNDROBIN;
case BOND_MODE_ACTIVEBACKUP:
return NETDEV_LAG_TX_TYPE_ACTIVEBACKUP;
case BOND_MODE_BROADCAST:
return NETDEV_LAG_TX_TYPE_BROADCAST;
case BOND_MODE_XOR:
case BOND_MODE_8023AD:
return NETDEV_LAG_TX_TYPE_HASH;
default:
return NETDEV_LAG_TX_TYPE_UNKNOWN;
}
}
static enum netdev_lag_hash bond_lag_hash_type(struct bonding *bond,
enum netdev_lag_tx_type type)
{
if (type != NETDEV_LAG_TX_TYPE_HASH)
return NETDEV_LAG_HASH_NONE;
switch (bond->params.xmit_policy) {
case BOND_XMIT_POLICY_LAYER2:
return NETDEV_LAG_HASH_L2;
case BOND_XMIT_POLICY_LAYER34:
return NETDEV_LAG_HASH_L34;
case BOND_XMIT_POLICY_LAYER23:
return NETDEV_LAG_HASH_L23;
case BOND_XMIT_POLICY_ENCAP23:
return NETDEV_LAG_HASH_E23;
case BOND_XMIT_POLICY_ENCAP34:
return NETDEV_LAG_HASH_E34;
default:
return NETDEV_LAG_HASH_UNKNOWN;
}
}
static int bond_master_upper_dev_link(struct bonding *bond, struct slave *slave,
struct netlink_ext_ack *extack)
{
struct netdev_lag_upper_info lag_upper_info;
enum netdev_lag_tx_type type;
type = bond_lag_tx_type(bond);
lag_upper_info.tx_type = type;
lag_upper_info.hash_type = bond_lag_hash_type(bond, type);
return netdev_master_upper_dev_link(slave->dev, bond->dev, slave,
&lag_upper_info, extack);
}
static void bond_upper_dev_unlink(struct bonding *bond, struct slave *slave)
{
netdev_upper_dev_unlink(slave->dev, bond->dev);
slave->dev->flags &= ~IFF_SLAVE;
}
static struct slave *bond_alloc_slave(struct bonding *bond)
{
struct slave *slave = NULL;
slave = kzalloc(sizeof(*slave), GFP_KERNEL);
if (!slave)
return NULL;
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info),
GFP_KERNEL);
if (!SLAVE_AD_INFO(slave)) {
kfree(slave);
return NULL;
}
}
INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
return slave;
}
static void bond_free_slave(struct slave *slave)
{
struct bonding *bond = bond_get_bond_by_slave(slave);
cancel_delayed_work_sync(&slave->notify_work);
if (BOND_MODE(bond) == BOND_MODE_8023AD)
kfree(SLAVE_AD_INFO(slave));
kfree(slave);
}
static void bond_fill_ifbond(struct bonding *bond, struct ifbond *info)
{
info->bond_mode = BOND_MODE(bond);
info->miimon = bond->params.miimon;
info->num_slaves = bond->slave_cnt;
}
static void bond_fill_ifslave(struct slave *slave, struct ifslave *info)
{
strcpy(info->slave_name, slave->dev->name);
info->link = slave->link;
info->state = bond_slave_state(slave);
info->link_failure_count = slave->link_failure_count;
}
static void bond_netdev_notify_work(struct work_struct *_work)
{
struct slave *slave = container_of(_work, struct slave,
notify_work.work);
if (rtnl_trylock()) {
struct netdev_bonding_info binfo;
bond_fill_ifslave(slave, &binfo.slave);
bond_fill_ifbond(slave->bond, &binfo.master);
netdev_bonding_info_change(slave->dev, &binfo);
rtnl_unlock();
} else {
queue_delayed_work(slave->bond->wq, &slave->notify_work, 1);
}
}
void bond_queue_slave_event(struct slave *slave)
{
queue_delayed_work(slave->bond->wq, &slave->notify_work, 0);
}
void bond_lower_state_changed(struct slave *slave)
{
struct netdev_lag_lower_state_info info;
info.link_up = slave->link == BOND_LINK_UP ||
slave->link == BOND_LINK_FAIL;
info.tx_enabled = bond_is_active_slave(slave);
netdev_lower_state_changed(slave->dev, &info);
}
/* enslave device <slave> to bond device <master> */
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
struct netlink_ext_ack *extack)
{
struct bonding *bond = netdev_priv(bond_dev);
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
struct slave *new_slave = NULL, *prev_slave;
struct sockaddr_storage ss;
int link_reporting;
int res = 0, i;
if (!bond->params.use_carrier &&
slave_dev->ethtool_ops->get_link == NULL &&
slave_ops->ndo_do_ioctl == NULL) {
slave_warn(bond_dev, slave_dev, "no link monitoring support\n");
}
/* already in-use? */
if (netdev_is_rx_handler_busy(slave_dev)) {
NL_SET_ERR_MSG(extack, "Device is in use and cannot be enslaved");
slave_err(bond_dev, slave_dev,
"Error: Device is in use and cannot be enslaved\n");
return -EBUSY;
}
if (bond_dev == slave_dev) {
NL_SET_ERR_MSG(extack, "Cannot enslave bond to itself.");
netdev_err(bond_dev, "cannot enslave bond to itself.\n");
return -EPERM;
}
/* vlan challenged mutual exclusion */
/* no need to lock since we're protected by rtnl_lock */
if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
slave_dbg(bond_dev, slave_dev, "is NETIF_F_VLAN_CHALLENGED\n");
if (vlan_uses_dev(bond_dev)) {
NL_SET_ERR_MSG(extack, "Can not enslave VLAN challenged device to VLAN enabled bond");
slave_err(bond_dev, slave_dev, "Error: cannot enslave VLAN challenged slave on VLAN enabled bond\n");
return -EPERM;
} else {
slave_warn(bond_dev, slave_dev, "enslaved VLAN challenged slave. Adding VLANs will be blocked as long as it is part of bond.\n");
}
} else {
slave_dbg(bond_dev, slave_dev, "is !NETIF_F_VLAN_CHALLENGED\n");
}
/* Old ifenslave binaries are no longer supported. These can
* be identified with moderate accuracy by the state of the slave:
* the current ifenslave will set the interface down prior to
* enslaving it; the old ifenslave will not.
*/
if (slave_dev->flags & IFF_UP) {
NL_SET_ERR_MSG(extack, "Device can not be enslaved while up");
slave_err(bond_dev, slave_dev, "slave is up - this may be due to an out of date ifenslave\n");
return -EPERM;
}
/* set bonding device ether type by slave - bonding netdevices are
* created with ether_setup, so when the slave type is not ARPHRD_ETHER
* there is a need to override some of the type dependent attribs/funcs.
*
* bond ether type mutual exclusion - don't allow slaves of dissimilar
* ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
*/
if (!bond_has_slaves(bond)) {
if (bond_dev->type != slave_dev->type) {
slave_dbg(bond_dev, slave_dev, "change device type from %d to %d\n",
bond_dev->type, slave_dev->type);
res = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE,
bond_dev);
res = notifier_to_errno(res);
if (res) {
slave_err(bond_dev, slave_dev, "refused to change device type\n");
return -EBUSY;
}
/* Flush unicast and multicast addresses */
dev_uc_flush(bond_dev);
dev_mc_flush(bond_dev);
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
else {
ether_setup(bond_dev);
bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
}
call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE,
bond_dev);
}
} else if (bond_dev->type != slave_dev->type) {
NL_SET_ERR_MSG(extack, "Device type is different from other slaves");
slave_err(bond_dev, slave_dev, "ether type (%d) is different from other slaves (%d), can not enslave it\n",
slave_dev->type, bond_dev->type);
return -EINVAL;
}
if (slave_dev->type == ARPHRD_INFINIBAND &&
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
NL_SET_ERR_MSG(extack, "Only active-backup mode is supported for infiniband slaves");
slave_warn(bond_dev, slave_dev, "Type (%d) supports only active-backup mode\n",
slave_dev->type);
res = -EOPNOTSUPP;
goto err_undo_flags;
}
if (!slave_ops->ndo_set_mac_address ||
slave_dev->type == ARPHRD_INFINIBAND) {
slave_warn(bond_dev, slave_dev, "The slave device specified does not support setting the MAC address\n");
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP &&
bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
if (!bond_has_slaves(bond)) {
bond->params.fail_over_mac = BOND_FOM_ACTIVE;
slave_warn(bond_dev, slave_dev, "Setting fail_over_mac to active for active-backup mode\n");
} else {
NL_SET_ERR_MSG(extack, "Slave device does not support setting the MAC address, but fail_over_mac is not set to active");
slave_err(bond_dev, slave_dev, "The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n");
res = -EOPNOTSUPP;
goto err_undo_flags;
}
}
}
call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
/* If this is the first slave, then we need to set the master's hardware
* address to be the same as the slave's.
*/
if (!bond_has_slaves(bond) &&
bond->dev->addr_assign_type == NET_ADDR_RANDOM) {
res = bond_set_dev_addr(bond->dev, slave_dev);
if (res)
goto err_undo_flags;
}
new_slave = bond_alloc_slave(bond);
if (!new_slave) {
res = -ENOMEM;
goto err_undo_flags;
}
new_slave->bond = bond;
new_slave->dev = slave_dev;
/* Set the new_slave's queue_id to be zero. Queue ID mapping
* is set via sysfs or module option if desired.
*/
new_slave->queue_id = 0;
/* Save slave's original mtu and then set it to match the bond */
new_slave->original_mtu = slave_dev->mtu;
res = dev_set_mtu(slave_dev, bond->dev->mtu);
if (res) {
slave_err(bond_dev, slave_dev, "Error %d calling dev_set_mtu\n", res);
goto err_free;
}
/* Save slave's original ("permanent") mac address for modes
* that need it, and for restoring it upon release, and then
* set it to the master's address
*/
bond_hw_addr_copy(new_slave->perm_hwaddr, slave_dev->dev_addr,
slave_dev->addr_len);
if (!bond->params.fail_over_mac ||
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* Set slave to master's mac address. The application already
* set the master's mac address to that of the first slave
*/
memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len);
ss.ss_family = slave_dev->type;
res = dev_set_mac_address(slave_dev, (struct sockaddr *)&ss,
extack);
if (res) {
slave_err(bond_dev, slave_dev, "Error %d calling set_mac_address\n", res);
goto err_restore_mtu;
}
}
/* set slave flag before open to prevent IPv6 addrconf */
slave_dev->flags |= IFF_SLAVE;
/* open the slave since the application closed it */
res = dev_open(slave_dev, extack);
if (res) {
slave_err(bond_dev, slave_dev, "Opening slave failed\n");
goto err_restore_mac;
}
slave_dev->priv_flags |= IFF_BONDING;
/* initialize slave stats */
dev_get_stats(new_slave->dev, &new_slave->slave_stats);
if (bond_is_lb(bond)) {
/* bond_alb_init_slave() must be called before all other stages since
* it might fail and we do not want to have to undo everything
*/
res = bond_alb_init_slave(bond, new_slave);
if (res)
goto err_close;
}
res = vlan_vids_add_by_dev(slave_dev, bond_dev);
if (res) {
slave_err(bond_dev, slave_dev, "Couldn't add bond vlan ids\n");
goto err_close;
}
prev_slave = bond_last_slave(bond);
new_slave->delay = 0;
new_slave->link_failure_count = 0;
if (bond_update_speed_duplex(new_slave) &&
bond_needs_speed_duplex(bond))
new_slave->link = BOND_LINK_DOWN;
new_slave->last_rx = jiffies -
(msecs_to_jiffies(bond->params.arp_interval) + 1);
for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
new_slave->target_last_arp_rx[i] = new_slave->last_rx;
if (bond->params.miimon && !bond->params.use_carrier) {
link_reporting = bond_check_dev_link(bond, slave_dev, 1);
if ((link_reporting == -1) && !bond->params.arp_interval) {
/* miimon is set but a bonded network driver
* does not support ETHTOOL/MII and
* arp_interval is not set. Note: if
* use_carrier is enabled, we will never go
* here (because netif_carrier is always
* supported); thus, we don't need to change
* the messages for netif_carrier.
*/
slave_warn(bond_dev, slave_dev, "MII and ETHTOOL support not available for slave, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n");
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
slave_warn(bond_dev, slave_dev, "can't get link status from slave; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n");
}
}
/* check for initial state */
new_slave->link = BOND_LINK_NOCHANGE;
if (bond->params.miimon) {
if (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS) {
if (bond->params.updelay) {
bond_set_slave_link_state(new_slave,
BOND_LINK_BACK,
BOND_SLAVE_NOTIFY_NOW);
new_slave->delay = bond->params.updelay;
} else {
bond_set_slave_link_state(new_slave,
BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
}
} else {
bond_set_slave_link_state(new_slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_NOW);
}
} else if (bond->params.arp_interval) {
bond_set_slave_link_state(new_slave,
(netif_carrier_ok(slave_dev) ?
BOND_LINK_UP : BOND_LINK_DOWN),
BOND_SLAVE_NOTIFY_NOW);
} else {
bond_set_slave_link_state(new_slave, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
}
if (new_slave->link != BOND_LINK_DOWN)
new_slave->last_link_up = jiffies;
slave_dbg(bond_dev, slave_dev, "Initial state of slave is BOND_LINK_%s\n",
new_slave->link == BOND_LINK_DOWN ? "DOWN" :
(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
if (bond_uses_primary(bond) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
rcu_assign_pointer(bond->primary_slave, new_slave);
bond->force_primary = true;
}
}
switch (BOND_MODE(bond)) {
case BOND_MODE_ACTIVEBACKUP:
bond_set_slave_inactive_flags(new_slave,
BOND_SLAVE_NOTIFY_NOW);
break;
case BOND_MODE_8023AD:
/* in 802.3ad mode, the internal mechanism
* will activate the slaves in the selected
* aggregator
*/
bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW);
/* if this is the first slave */
if (!prev_slave) {
SLAVE_AD_INFO(new_slave)->id = 1;
/* Initialize AD with the number of times that the AD timer is called in 1 second
* can be called only after the mac address of the bond is set
*/
bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
} else {
SLAVE_AD_INFO(new_slave)->id =
SLAVE_AD_INFO(prev_slave)->id + 1;
}
bond_3ad_bind_slave(new_slave);
break;
case BOND_MODE_TLB:
case BOND_MODE_ALB:
bond_set_active_slave(new_slave);
bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW);
break;
default:
slave_dbg(bond_dev, slave_dev, "This slave is always active in trunk mode\n");
/* always active in trunk mode */
bond_set_active_slave(new_slave);
/* In trunking mode there is little meaning to curr_active_slave
* anyway (it holds no special properties of the bond device),
* so we can change it without calling change_active_interface()
*/
if (!rcu_access_pointer(bond->curr_active_slave) &&
new_slave->link == BOND_LINK_UP)
rcu_assign_pointer(bond->curr_active_slave, new_slave);
break;
} /* switch(bond_mode) */
#ifdef CONFIG_NET_POLL_CONTROLLER
if (bond->dev->npinfo) {
if (slave_enable_netpoll(new_slave)) {
slave_info(bond_dev, slave_dev, "master_dev is using netpoll, but new slave device does not support netpoll\n");
res = -EBUSY;
goto err_detach;
}
}
#endif
if (!(bond_dev->features & NETIF_F_LRO))
dev_disable_lro(slave_dev);
res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
new_slave);
if (res) {
slave_dbg(bond_dev, slave_dev, "Error %d calling netdev_rx_handler_register\n", res);
goto err_detach;
}
res = bond_master_upper_dev_link(bond, new_slave, extack);
if (res) {
slave_dbg(bond_dev, slave_dev, "Error %d calling bond_master_upper_dev_link\n", res);
goto err_unregister;
}
res = bond_sysfs_slave_add(new_slave);
if (res) {
slave_dbg(bond_dev, slave_dev, "Error %d calling bond_sysfs_slave_add\n", res);
goto err_upper_unlink;
}
bond->nest_level = dev_get_nest_level(bond_dev) + 1;
/* If the mode uses primary, then the following is handled by
* bond_change_active_slave().
*/
if (!bond_uses_primary(bond)) {
/* set promiscuity level to new slave */
if (bond_dev->flags & IFF_PROMISC) {
res = dev_set_promiscuity(slave_dev, 1);
if (res)
goto err_sysfs_del;
}
/* set allmulti level to new slave */
if (bond_dev->flags & IFF_ALLMULTI) {
res = dev_set_allmulti(slave_dev, 1);
if (res) {
if (bond_dev->flags & IFF_PROMISC)
dev_set_promiscuity(slave_dev, -1);
goto err_sysfs_del;
}
}
netif_addr_lock_bh(bond_dev);
dev_mc_sync_multiple(slave_dev, bond_dev);
dev_uc_sync_multiple(slave_dev, bond_dev);
netif_addr_unlock_bh(bond_dev);
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
/* add lacpdu mc addr to mc list */
u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
dev_mc_add(slave_dev, lacpdu_multicast);
}
}
bond->slave_cnt++;
bond_compute_features(bond);
bond_set_carrier(bond);
if (bond_uses_primary(bond)) {
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
}
if (bond_mode_can_use_xmit_hash(bond))
bond_update_slave_arr(bond, NULL);
slave_info(bond_dev, slave_dev, "Enslaving as %s interface with %s link\n",
bond_is_active_slave(new_slave) ? "an active" : "a backup",
new_slave->link != BOND_LINK_DOWN ? "an up" : "a down");
/* enslave is successful */
bond_queue_slave_event(new_slave);
return 0;
/* Undo stages on error */
err_sysfs_del:
bond_sysfs_slave_del(new_slave);
err_upper_unlink:
bond_upper_dev_unlink(bond, new_slave);
err_unregister:
netdev_rx_handler_unregister(slave_dev);
err_detach:
vlan_vids_del_by_dev(slave_dev, bond_dev);
if (rcu_access_pointer(bond->primary_slave) == new_slave)
RCU_INIT_POINTER(bond->primary_slave, NULL);
if (rcu_access_pointer(bond->curr_active_slave) == new_slave) {
block_netpoll_tx();
bond_change_active_slave(bond, NULL);
bond_select_active_slave(bond);
unblock_netpoll_tx();
}
/* either primary_slave or curr_active_slave might've changed */
synchronize_rcu();
slave_disable_netpoll(new_slave);
err_close:
slave_dev->priv_flags &= ~IFF_BONDING;
dev_close(slave_dev);
err_restore_mac:
slave_dev->flags &= ~IFF_SLAVE;
if (!bond->params.fail_over_mac ||
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* XXX TODO - fom follow mode needs to change master's
* MAC if this slave's MAC is in use by the bond, or at
* least print a warning.
*/
bond_hw_addr_copy(ss.__data, new_slave->perm_hwaddr,
new_slave->dev->addr_len);
ss.ss_family = slave_dev->type;
dev_set_mac_address(slave_dev, (struct sockaddr *)&ss, NULL);
}
err_restore_mtu:
dev_set_mtu(slave_dev, new_slave->original_mtu);
err_free:
bond_free_slave(new_slave);
err_undo_flags:
/* Enslave of first slave has failed and we need to fix master's mac */
if (!bond_has_slaves(bond)) {
if (ether_addr_equal_64bits(bond_dev->dev_addr,
slave_dev->dev_addr))
eth_hw_addr_random(bond_dev);
if (bond_dev->type != ARPHRD_ETHER) {
dev_close(bond_dev);
ether_setup(bond_dev);
bond_dev->flags |= IFF_MASTER;
bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
}
}
return res;
}
/* Try to release the slave device <slave> from the bond device <master>
* It is legal to access curr_active_slave without a lock because all the function
* is RTNL-locked. If "all" is true it means that the function is being called
* while destroying a bond interface and all slaves are being released.
*
* The rules for slave state should be:
* for Active/Backup:
* Active stays on all backups go down
* for Bonded connections:
* The first up interface should be left on and all others downed.
*/
static int __bond_release_one(struct net_device *bond_dev,
struct net_device *slave_dev,
bool all, bool unregister)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *oldcurrent;
struct sockaddr_storage ss;
int old_flags = bond_dev->flags;
netdev_features_t old_features = bond_dev->features;
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
!netdev_has_upper_dev(slave_dev, bond_dev)) {
slave_dbg(bond_dev, slave_dev, "cannot release slave\n");
return -EINVAL;
}
block_netpoll_tx();
slave = bond_get_slave_by_dev(bond, slave_dev);
if (!slave) {
/* not a slave of this bond */
slave_info(bond_dev, slave_dev, "interface not enslaved\n");
unblock_netpoll_tx();
return -EINVAL;
}
bond_set_slave_inactive_flags(slave, BOND_SLAVE_NOTIFY_NOW);
bond_sysfs_slave_del(slave);
/* recompute stats just before removing the slave */
bond_get_stats(bond->dev, &bond->bond_stats);
bond_upper_dev_unlink(bond, slave);
/* unregister rx_handler early so bond_handle_frame wouldn't be called
* for this slave anymore.
*/
netdev_rx_handler_unregister(slave_dev);
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_unbind_slave(slave);
if (bond_mode_can_use_xmit_hash(bond))
bond_update_slave_arr(bond, slave);
slave_info(bond_dev, slave_dev, "Releasing %s interface\n",
bond_is_active_slave(slave) ? "active" : "backup");
oldcurrent = rcu_access_pointer(bond->curr_active_slave);
RCU_INIT_POINTER(bond->current_arp_slave, NULL);
if (!all && (!bond->params.fail_over_mac ||
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP)) {
if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) &&
bond_has_slaves(bond))
slave_warn(bond_dev, slave_dev, "the permanent HWaddr of slave - %pM - is still in use by bond - set the HWaddr of slave to a different address to avoid conflicts\n",
slave->perm_hwaddr);
}
if (rtnl_dereference(bond->primary_slave) == slave)
RCU_INIT_POINTER(bond->primary_slave, NULL);
if (oldcurrent == slave)
bond_change_active_slave(bond, NULL);
if (bond_is_lb(bond)) {
/* Must be called only after the slave has been
* detached from the list and the curr_active_slave
* has been cleared (if our_slave == old_current),
* but before a new active slave is selected.
*/
bond_alb_deinit_slave(bond, slave);
}
if (all) {
RCU_INIT_POINTER(bond->curr_active_slave, NULL);
} else if (oldcurrent == slave) {
/* Note that we hold RTNL over this sequence, so there
* is no concern that another slave add/remove event
* will interfere.
*/
bond_select_active_slave(bond);
}
if (!bond_has_slaves(bond)) {
bond_set_carrier(bond);
eth_hw_addr_random(bond_dev);
bond->nest_level = SINGLE_DEPTH_NESTING;
} else {
bond->nest_level = dev_get_nest_level(bond_dev) + 1;
}
unblock_netpoll_tx();
synchronize_rcu();
bond->slave_cnt--;
if (!bond_has_slaves(bond)) {
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
}
bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
(old_features & NETIF_F_VLAN_CHALLENGED))
slave_info(bond_dev, slave_dev, "last VLAN challenged slave left bond - VLAN blocking is removed\n");
vlan_vids_del_by_dev(slave_dev, bond_dev);
/* If the mode uses primary, then this case was handled above by
* bond_change_active_slave(..., NULL)
*/
if (!bond_uses_primary(bond)) {
/* unset promiscuity level from slave
* NOTE: The NETDEV_CHANGEADDR call above may change the value
* of the IFF_PROMISC flag in the bond_dev, but we need the
* value of that flag before that change, as that was the value
* when this slave was attached, so we cache at the start of the
* function and use it here. Same goes for ALLMULTI below
*/
if (old_flags & IFF_PROMISC)
dev_set_promiscuity(slave_dev, -1);
/* unset allmulti level from slave */
if (old_flags & IFF_ALLMULTI)
dev_set_allmulti(slave_dev, -1);
bond_hw_addr_flush(bond_dev, slave_dev);
}
slave_disable_netpoll(slave);
/* close slave before restoring its mac address */
dev_close(slave_dev);
if (bond->params.fail_over_mac != BOND_FOM_ACTIVE ||
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* restore original ("permanent") mac address */
bond_hw_addr_copy(ss.__data, slave->perm_hwaddr,
slave->dev->addr_len);
ss.ss_family = slave_dev->type;
dev_set_mac_address(slave_dev, (struct sockaddr *)&ss, NULL);
}
if (unregister)
__dev_set_mtu(slave_dev, slave->original_mtu);
else
dev_set_mtu(slave_dev, slave->original_mtu);
slave_dev->priv_flags &= ~IFF_BONDING;
bond_free_slave(slave);
return 0;
}
/* A wrapper used because of ndo_del_link */
int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
{
return __bond_release_one(bond_dev, slave_dev, false, false);
}
/* First release a slave and then destroy the bond if no more slaves are left.
* Must be under rtnl_lock when this function is called.
*/
static int bond_release_and_destroy(struct net_device *bond_dev,
struct net_device *slave_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
int ret;
ret = __bond_release_one(bond_dev, slave_dev, false, true);
if (ret == 0 && !bond_has_slaves(bond)) {
bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
netdev_info(bond_dev, "Destroying bond\n");
bond_remove_proc_entry(bond);
unregister_netdevice(bond_dev);
}
return ret;
}
static void bond_info_query(struct net_device *bond_dev, struct ifbond *info)
{
struct bonding *bond = netdev_priv(bond_dev);
bond_fill_ifbond(bond, info);
}
static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
{
struct bonding *bond = netdev_priv(bond_dev);
struct list_head *iter;
int i = 0, res = -ENODEV;
struct slave *slave;
bond_for_each_slave(bond, slave, iter) {
if (i++ == (int)info->slave_id) {
res = 0;
bond_fill_ifslave(slave, info);
break;
}
}
return res;
}
/*-------------------------------- Monitoring -------------------------------*/
/* called with rcu_read_lock() */
static int bond_miimon_inspect(struct bonding *bond)
{
int link_state, commit = 0;
struct list_head *iter;
struct slave *slave;
bool ignore_updelay;
ignore_updelay = !rcu_dereference(bond->curr_active_slave);
bond_for_each_slave_rcu(bond, slave, iter) {
slave->new_link = BOND_LINK_NOCHANGE;
slave->link_new_state = slave->link;
link_state = bond_check_dev_link(bond, slave->dev, 0);
switch (slave->link) {
case BOND_LINK_UP:
if (link_state)
continue;
bond_propose_link_state(slave, BOND_LINK_FAIL);
commit++;
slave->delay = bond->params.downdelay;
if (slave->delay) {
slave_info(bond->dev, slave->dev, "link status down for %sinterface, disabling it in %d ms\n",
(BOND_MODE(bond) ==
BOND_MODE_ACTIVEBACKUP) ?
(bond_is_active_slave(slave) ?
"active " : "backup ") : "",
bond->params.downdelay * bond->params.miimon);
}
/*FALLTHRU*/
case BOND_LINK_FAIL:
if (link_state) {
/* recovered before downdelay expired */
bond_propose_link_state(slave, BOND_LINK_UP);
slave->last_link_up = jiffies;
slave_info(bond->dev, slave->dev, "link status up again after %d ms\n",
(bond->params.downdelay - slave->delay) *
bond->params.miimon);
commit++;
continue;
}
if (slave->delay <= 0) {
slave->new_link = BOND_LINK_DOWN;
commit++;
continue;
}
slave->delay--;
break;
case BOND_LINK_DOWN:
if (!link_state)
continue;
bond_propose_link_state(slave, BOND_LINK_BACK);
commit++;
slave->delay = bond->params.updelay;
if (slave->delay) {
slave_info(bond->dev, slave->dev, "link status up, enabling it in %d ms\n",
ignore_updelay ? 0 :
bond->params.updelay *
bond->params.miimon);
}
/*FALLTHRU*/
case BOND_LINK_BACK:
if (!link_state) {
bond_propose_link_state(slave, BOND_LINK_DOWN);
slave_info(bond->dev, slave->dev, "link status down again after %d ms\n",
(bond->params.updelay - slave->delay) *
bond->params.miimon);
commit++;
continue;
}
if (ignore_updelay)
slave->delay = 0;
if (slave->delay <= 0) {
slave->new_link = BOND_LINK_UP;
commit++;
ignore_updelay = false;
continue;
}
slave->delay--;
break;
}
}
return commit;
}
static void bond_miimon_link_change(struct bonding *bond,
struct slave *slave,
char link)
{
switch (BOND_MODE(bond)) {
case BOND_MODE_8023AD:
bond_3ad_handle_link_change(slave, link);
break;
case BOND_MODE_TLB:
case BOND_MODE_ALB:
bond_alb_handle_link_change(bond, slave, link);
break;
case BOND_MODE_XOR:
bond_update_slave_arr(bond, NULL);
break;
}
}
static void bond_miimon_commit(struct bonding *bond)
{
struct list_head *iter;
struct slave *slave, *primary;
bond_for_each_slave(bond, slave, iter) {
switch (slave->new_link) {
case BOND_LINK_NOCHANGE:
/* For 802.3ad mode, check current slave speed and
* duplex again in case its port was disabled after
* invalid speed/duplex reporting but recovered before
* link monitoring could make a decision on the actual
* link status
*/
if (BOND_MODE(bond) == BOND_MODE_8023AD &&
slave->link == BOND_LINK_UP)
bond_3ad_adapter_speed_duplex_changed(slave);
continue;
case BOND_LINK_UP:
if (bond_update_speed_duplex(slave) &&
bond_needs_speed_duplex(bond)) {
slave->link = BOND_LINK_DOWN;
if (net_ratelimit())
slave_warn(bond->dev, slave->dev,
"failed to get link speed/duplex\n");
continue;
}
bond_set_slave_link_state(slave, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
slave->last_link_up = jiffies;
primary = rtnl_dereference(bond->primary_slave);
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
/* prevent it from being the active one */
bond_set_backup_slave(slave);
} else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
/* make it immediately active */
bond_set_active_slave(slave);
} else if (slave != primary) {
/* prevent it from being the active one */
bond_set_backup_slave(slave);
}
slave_info(bond->dev, slave->dev, "link status definitely up, %u Mbps %s duplex\n",
slave->speed == SPEED_UNKNOWN ? 0 : slave->speed,
slave->duplex ? "full" : "half");
bond_miimon_link_change(bond, slave, BOND_LINK_UP);
if (!bond->curr_active_slave || slave == primary)
goto do_failover;
continue;
case BOND_LINK_DOWN:
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
bond_set_slave_link_state(slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_NOW);
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP ||
BOND_MODE(bond) == BOND_MODE_8023AD)
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
slave_info(bond->dev, slave->dev, "link status definitely down, disabling slave\n");
bond_miimon_link_change(bond, slave, BOND_LINK_DOWN);
if (slave == rcu_access_pointer(bond->curr_active_slave))
goto do_failover;
continue;
default:
slave_err(bond->dev, slave->dev, "invalid new link %d on slave\n",
slave->new_link);
slave->new_link = BOND_LINK_NOCHANGE;
continue;
}
do_failover:
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
}
bond_set_carrier(bond);
}
/* bond_mii_monitor
*
* Really a wrapper that splits the mii monitor into two phases: an
* inspection, then (if inspection indicates something needs to be done)
* an acquisition of appropriate locks followed by a commit phase to
* implement whatever link state changes are indicated.
*/
static void bond_mii_monitor(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
mii_work.work);
bool should_notify_peers = false;
bool commit;
unsigned long delay;
struct slave *slave;
struct list_head *iter;
delay = msecs_to_jiffies(bond->params.miimon);
if (!bond_has_slaves(bond))
goto re_arm;
rcu_read_lock();
should_notify_peers = bond_should_notify_peers(bond);
commit = !!bond_miimon_inspect(bond);
if (bond->send_peer_notif) {
rcu_read_unlock();
if (rtnl_trylock()) {
bond->send_peer_notif--;
rtnl_unlock();
}
} else {
rcu_read_unlock();
}
if (commit) {
/* Race avoidance with bond_close cancel of workqueue */
if (!rtnl_trylock()) {
delay = 1;
should_notify_peers = false;
goto re_arm;
}
bond_for_each_slave(bond, slave, iter) {
bond_commit_link_state(slave, BOND_SLAVE_NOTIFY_LATER);
}
bond_miimon_commit(bond);
rtnl_unlock(); /* might sleep, hold no other locks */
}
re_arm:
if (bond->params.miimon)
queue_delayed_work(bond->wq, &bond->mii_work, delay);
if (should_notify_peers) {
if (!rtnl_trylock())
return;
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev);
rtnl_unlock();
}
}
static int bond_upper_dev_walk(struct net_device *upper, void *data)
{
__be32 ip = *((__be32 *)data);
return ip == bond_confirm_addr(upper, 0, ip);
}
static bool bond_has_this_ip(struct bonding *bond, __be32 ip)
{
bool ret = false;
if (ip == bond_confirm_addr(bond->dev, 0, ip))
return true;
rcu_read_lock();
if (netdev_walk_all_upper_dev_rcu(bond->dev, bond_upper_dev_walk, &ip))
ret = true;
rcu_read_unlock();
return ret;
}
/* We go to the (large) trouble of VLAN tagging ARP frames because
* switches in VLAN mode (especially if ports are configured as
* "native" to a VLAN) might not pass non-tagged frames.
*/
static void bond_arp_send(struct slave *slave, int arp_op, __be32 dest_ip,
__be32 src_ip, struct bond_vlan_tag *tags)
{
struct sk_buff *skb;
struct bond_vlan_tag *outer_tag = tags;
struct net_device *slave_dev = slave->dev;
struct net_device *bond_dev = slave->bond->dev;
slave_dbg(bond_dev, slave_dev, "arp %d on slave: dst %pI4 src %pI4\n",
arp_op, &dest_ip, &src_ip);
skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
NULL, slave_dev->dev_addr, NULL);
if (!skb) {
net_err_ratelimited("ARP packet allocation failed\n");
return;
}
if (!tags || tags->vlan_proto == VLAN_N_VID)
goto xmit;
tags++;
/* Go through all the tags backwards and add them to the packet */
while (tags->vlan_proto != VLAN_N_VID) {
if (!tags->vlan_id) {
tags++;
continue;
}
slave_dbg(bond_dev, slave_dev, "inner tag: proto %X vid %X\n",
ntohs(outer_tag->vlan_proto), tags->vlan_id);
skb = vlan_insert_tag_set_proto(skb, tags->vlan_proto,
tags->vlan_id);
if (!skb) {
net_err_ratelimited("failed to insert inner VLAN tag\n");
return;
}
tags++;
}
/* Set the outer tag */
if (outer_tag->vlan_id) {
slave_dbg(bond_dev, slave_dev, "outer tag: proto %X vid %X\n",
ntohs(outer_tag->vlan_proto), outer_tag->vlan_id);
__vlan_hwaccel_put_tag(skb, outer_tag->vlan_proto,
outer_tag->vlan_id);
}
xmit:
arp_xmit(skb);
}
/* Validate the device path between the @start_dev and the @end_dev.
* The path is valid if the @end_dev is reachable through device
* stacking.
* When the path is validated, collect any vlan information in the
* path.
*/
struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev,
struct net_device *end_dev,
int level)
{
struct bond_vlan_tag *tags;
struct net_device *upper;
struct list_head *iter;
if (start_dev == end_dev) {
tags = kcalloc(level + 1, sizeof(*tags), GFP_ATOMIC);
if (!tags)
return ERR_PTR(-ENOMEM);
tags[level].vlan_proto = VLAN_N_VID;
return tags;
}
netdev_for_each_upper_dev_rcu(start_dev, upper, iter) {
tags = bond_verify_device_path(upper, end_dev, level + 1);
if (IS_ERR_OR_NULL(tags)) {
if (IS_ERR(tags))
return tags;
continue;
}
if (is_vlan_dev(upper)) {
tags[level].vlan_proto = vlan_dev_vlan_proto(upper);
tags[level].vlan_id = vlan_dev_vlan_id(upper);
}
return tags;
}
return NULL;
}
static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
{
struct rtable *rt;
struct bond_vlan_tag *tags;
__be32 *targets = bond->params.arp_targets, addr;
int i;
for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) {
slave_dbg(bond->dev, slave->dev, "%s: target %pI4\n",
__func__, &targets[i]);
tags = NULL;
/* Find out through which dev should the packet go */
rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
RTO_ONLINK, 0);
if (IS_ERR(rt)) {
/* there's no route to target - try to send arp
* probe to generate any traffic (arp_validate=0)
*/
if (bond->params.arp_validate)
net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
bond->dev->name,
&targets[i]);
bond_arp_send(slave, ARPOP_REQUEST, targets[i],
0, tags);
continue;
}
/* bond device itself */
if (rt->dst.dev == bond->dev)
goto found;
rcu_read_lock();
tags = bond_verify_device_path(bond->dev, rt->dst.dev, 0);
rcu_read_unlock();
if (!IS_ERR_OR_NULL(tags))
goto found;
/* Not our device - skip */
slave_dbg(bond->dev, slave->dev, "no path to arp_ip_target %pI4 via rt.dev %s\n",
&targets[i], rt->dst.dev ? rt->dst.dev->name : "NULL");
ip_rt_put(rt);
continue;
found:
addr = bond_confirm_addr(rt->dst.dev, targets[i], 0);
ip_rt_put(rt);
bond_arp_send(slave, ARPOP_REQUEST, targets[i], addr, tags);
kfree(tags);
}
}
static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
{
int i;
if (!sip || !bond_has_this_ip(bond, tip)) {
slave_dbg(bond->dev, slave->dev, "%s: sip %pI4 tip %pI4 not found\n",
__func__, &sip, &tip);
return;
}
i = bond_get_targets_ip(bond->params.arp_targets, sip);
if (i == -1) {
slave_dbg(bond->dev, slave->dev, "%s: sip %pI4 not found in targets\n",
__func__, &sip);
return;
}
slave->last_rx = jiffies;
slave->target_last_arp_rx[i] = jiffies;
}
int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
struct slave *slave)
{
struct arphdr *arp = (struct arphdr *)skb->data;
struct slave *curr_active_slave, *curr_arp_slave;
unsigned char *arp_ptr;
__be32 sip, tip;
int is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP);
unsigned int alen;
if (!slave_do_arp_validate(bond, slave)) {
if ((slave_do_arp_validate_only(bond) && is_arp) ||
!slave_do_arp_validate_only(bond))
slave->last_rx = jiffies;
return RX_HANDLER_ANOTHER;
} else if (!is_arp) {
return RX_HANDLER_ANOTHER;
}
alen = arp_hdr_len(bond->dev);
slave_dbg(bond->dev, slave->dev, "%s: skb->dev %s\n",
__func__, skb->dev->name);
if (alen > skb_headlen(skb)) {
arp = kmalloc(alen, GFP_ATOMIC);
if (!arp)
goto out_unlock;
if (skb_copy_bits(skb, 0, arp, alen) < 0)
goto out_unlock;
}
if (arp->ar_hln != bond->dev->addr_len ||
skb->pkt_type == PACKET_OTHERHOST ||
skb->pkt_type == PACKET_LOOPBACK ||
arp->ar_hrd != htons(ARPHRD_ETHER) ||
arp->ar_pro != htons(ETH_P_IP) ||
arp->ar_pln != 4)
goto out_unlock;
arp_ptr = (unsigned char *)(arp + 1);
arp_ptr += bond->dev->addr_len;
memcpy(&sip, arp_ptr, 4);
arp_ptr += 4 + bond->dev->addr_len;
memcpy(&tip, arp_ptr, 4);
slave_dbg(bond->dev, slave->dev, "%s: %s/%d av %d sv %d sip %pI4 tip %pI4\n",
__func__, slave->dev->name, bond_slave_state(slave),
bond->params.arp_validate, slave_do_arp_validate(bond, slave),
&sip, &tip);
curr_active_slave = rcu_dereference(bond->curr_active_slave);
curr_arp_slave = rcu_dereference(bond->current_arp_slave);
/* We 'trust' the received ARP enough to validate it if:
*
* (a) the slave receiving the ARP is active (which includes the
* current ARP slave, if any), or
*
* (b) the receiving slave isn't active, but there is a currently
* active slave and it received valid arp reply(s) after it became
* the currently active slave, or
*
* (c) there is an ARP slave that sent an ARP during the prior ARP
* interval, and we receive an ARP reply on any slave. We accept
* these because switch FDB update delays may deliver the ARP
* reply to a slave other than the sender of the ARP request.
*
* Note: for (b), backup slaves are receiving the broadcast ARP
* request, not a reply. This request passes from the sending
* slave through the L2 switch(es) to the receiving slave. Since
* this is checking the request, sip/tip are swapped for
* validation.
*
* This is done to avoid endless looping when we can't reach the
* arp_ip_target and fool ourselves with our own arp requests.
*/
if (bond_is_active_slave(slave))
bond_validate_arp(bond, slave, sip, tip);
else if (curr_active_slave &&
time_after(slave_last_rx(bond, curr_active_slave),
curr_active_slave->last_link_up))
bond_validate_arp(bond, slave, tip, sip);
else if (curr_arp_slave && (arp->ar_op == htons(ARPOP_REPLY)) &&
bond_time_in_interval(bond,
dev_trans_start(curr_arp_slave->dev), 1))
bond_validate_arp(bond, slave, sip, tip);
out_unlock:
if (arp != (struct arphdr *)skb->data)
kfree(arp);
return RX_HANDLER_ANOTHER;
}
/* function to verify if we're in the arp_interval timeslice, returns true if
* (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval +
* arp_interval/2) . the arp_interval/2 is needed for really fast networks.
*/
static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act,
int mod)
{
int delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
return time_in_range(jiffies,
last_act - delta_in_ticks,
last_act + mod * delta_in_ticks + delta_in_ticks/2);
}
/* This function is called regularly to monitor each slave's link
* ensuring that traffic is being sent and received when arp monitoring
* is used in load-balancing mode. if the adapter has been dormant, then an
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
* arp monitoring in active backup mode.
*/
static void bond_loadbalance_arp_mon(struct bonding *bond)
{
struct slave *slave, *oldcurrent;
struct list_head *iter;
int do_failover = 0, slave_state_changed = 0;
if (!bond_has_slaves(bond))
goto re_arm;
rcu_read_lock();
oldcurrent = rcu_dereference(bond->curr_active_slave);
/* see if any of the previous devices are up now (i.e. they have
* xmt and rcv traffic). the curr_active_slave does not come into
* the picture unless it is null. also, slave->last_link_up is not
* needed here because we send an arp on each slave and give a slave
* as long as it needs to get the tx/rx within the delta.
* TODO: what about up/down delay in arp mode? it wasn't here before
* so it can wait
*/
bond_for_each_slave_rcu(bond, slave, iter) {
unsigned long trans_start = dev_trans_start(slave->dev);
slave->new_link = BOND_LINK_NOCHANGE;
if (slave->link != BOND_LINK_UP) {
if (bond_time_in_interval(bond, trans_start, 1) &&
bond_time_in_interval(bond, slave->last_rx, 1)) {
slave->new_link = BOND_LINK_UP;
slave_state_changed = 1;
/* primary_slave has no meaning in round-robin
* mode. the window of a slave being up and
* curr_active_slave being null after enslaving
* is closed.
*/
if (!oldcurrent) {
slave_info(bond->dev, slave->dev, "link status definitely up\n");
do_failover = 1;
} else {
slave_info(bond->dev, slave->dev, "interface is now up\n");
}
}
} else {
/* slave->link == BOND_LINK_UP */
/* not all switches will respond to an arp request
* when the source ip is 0, so don't take the link down
* if we don't know our ip yet
*/
if (!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, slave->last_rx, 2)) {
slave->new_link = BOND_LINK_DOWN;
slave_state_changed = 1;
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
slave_info(bond->dev, slave->dev, "interface is now down\n");
if (slave == oldcurrent)
do_failover = 1;
}
}
/* note: if switch is in round-robin mode, all links
* must tx arp to ensure all links rx an arp - otherwise
* links may oscillate or not come up at all; if switch is
* in something like xor mode, there is nothing we can
* do - all replies will be rx'ed on same link causing slaves
* to be unstable during low/no traffic periods
*/
if (bond_slave_is_up(slave))
bond_arp_send_all(bond, slave);
}
rcu_read_unlock();
if (do_failover || slave_state_changed) {
if (!rtnl_trylock())
goto re_arm;
bond_for_each_slave(bond, slave, iter) {
if (slave->new_link != BOND_LINK_NOCHANGE)
slave->link = slave->new_link;
}
if (slave_state_changed) {
bond_slave_state_change(bond);
if (BOND_MODE(bond) == BOND_MODE_XOR)
bond_update_slave_arr(bond, NULL);
}
if (do_failover) {
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
}
rtnl_unlock();
}
re_arm:
if (bond->params.arp_interval)
queue_delayed_work(bond->wq, &bond->arp_work,
msecs_to_jiffies(bond->params.arp_interval));
}
/* Called to inspect slaves for active-backup mode ARP monitor link state
* changes. Sets new_link in slaves to specify what action should take
* place for the slave. Returns 0 if no changes are found, >0 if changes
* to link states must be committed.
*
* Called with rcu_read_lock held.
*/
static int bond_ab_arp_inspect(struct bonding *bond)
{
unsigned long trans_start, last_rx;
struct list_head *iter;
struct slave *slave;
int commit = 0;
bond_for_each_slave_rcu(bond, slave, iter) {
slave->new_link = BOND_LINK_NOCHANGE;
last_rx = slave_last_rx(bond, slave);
if (slave->link != BOND_LINK_UP) {
if (bond_time_in_interval(bond, last_rx, 1)) {
slave->new_link = BOND_LINK_UP;
commit++;
}
continue;
}
/* Give slaves 2*delta after being enslaved or made
* active. This avoids bouncing, as the last receive
* times need a full ARP monitor cycle to be updated.
*/
if (bond_time_in_interval(bond, slave->last_link_up, 2))
continue;
/* Backup slave is down if:
* - No current_arp_slave AND
* - more than 3*delta since last receive AND
* - the bond has an IP address
*
* Note: a non-null current_arp_slave indicates
* the curr_active_slave went down and we are
* searching for a new one; under this condition
* we only take the curr_active_slave down - this
* gives each slave a chance to tx/rx traffic
* before being taken out
*/
if (!bond_is_active_slave(slave) &&
!rcu_access_pointer(bond->current_arp_slave) &&
!bond_time_in_interval(bond, last_rx, 3)) {
slave->new_link = BOND_LINK_DOWN;
commit++;
}
/* Active slave is down if:
* - more than 2*delta since transmitting OR
* - (more than 2*delta since receive AND
* the bond has an IP address)
*/
trans_start = dev_trans_start(slave->dev);
if (bond_is_active_slave(slave) &&
(!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, last_rx, 2))) {
slave->new_link = BOND_LINK_DOWN;
commit++;
}
}
return commit;
}
/* Called to commit link state changes noted by inspection step of
* active-backup mode ARP monitor.
*
* Called with RTNL hold.
*/
static void bond_ab_arp_commit(struct bonding *bond)
{
unsigned long trans_start;
struct list_head *iter;
struct slave *slave;
bond_for_each_slave(bond, slave, iter) {
switch (slave->new_link) {
case BOND_LINK_NOCHANGE:
continue;
case BOND_LINK_UP:
trans_start = dev_trans_start(slave->dev);
if (rtnl_dereference(bond->curr_active_slave) != slave ||
(!rtnl_dereference(bond->curr_active_slave) &&
bond_time_in_interval(bond, trans_start, 1))) {
struct slave *current_arp_slave;
current_arp_slave = rtnl_dereference(bond->current_arp_slave);
bond_set_slave_link_state(slave, BOND_LINK_UP,
BOND_SLAVE_NOTIFY_NOW);
if (current_arp_slave) {
bond_set_slave_inactive_flags(
current_arp_slave,
BOND_SLAVE_NOTIFY_NOW);
RCU_INIT_POINTER(bond->current_arp_slave, NULL);
}
slave_info(bond->dev, slave->dev, "link status definitely up\n");
if (!rtnl_dereference(bond->curr_active_slave) ||
slave == rtnl_dereference(bond->primary_slave))
goto do_failover;
}
continue;
case BOND_LINK_DOWN:
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
bond_set_slave_link_state(slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_NOW);
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
slave_info(bond->dev, slave->dev, "link status definitely down, disabling slave\n");
if (slave == rtnl_dereference(bond->curr_active_slave)) {
RCU_INIT_POINTER(bond->current_arp_slave, NULL);
goto do_failover;
}
continue;
default:
slave_err(bond->dev, slave->dev, "impossible: new_link %d on slave\n",
slave->new_link);
continue;
}
do_failover:
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
}
bond_set_carrier(bond);
}
/* Send ARP probes for active-backup mode ARP monitor.
*
* Called with rcu_read_lock held.
*/
static bool bond_ab_arp_probe(struct bonding *bond)
{
struct slave *slave, *before = NULL, *new_slave = NULL,
*curr_arp_slave = rcu_dereference(bond->current_arp_slave),
*curr_active_slave = rcu_dereference(bond->curr_active_slave);
struct list_head *iter;
bool found = false;
bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER;
if (curr_arp_slave && curr_active_slave)
netdev_info(bond->dev, "PROBE: c_arp %s && cas %s BAD\n",
curr_arp_slave->dev->name,
curr_active_slave->dev->name);
if (curr_active_slave) {
bond_arp_send_all(bond, curr_active_slave);
return should_notify_rtnl;
}
/* if we don't have a curr_active_slave, search for the next available
* backup slave from the current_arp_slave and make it the candidate
* for becoming the curr_active_slave
*/
if (!curr_arp_slave) {
curr_arp_slave = bond_first_slave_rcu(bond);
if (!curr_arp_slave)
return should_notify_rtnl;
}
bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_LATER);
bond_for_each_slave_rcu(bond, slave, iter) {
if (!found && !before && bond_slave_is_up(slave))
before = slave;
if (found && !new_slave && bond_slave_is_up(slave))
new_slave = slave;
/* if the link state is up at this point, we
* mark it down - this can happen if we have
* simultaneous link failures and
* reselect_active_interface doesn't make this
* one the current slave so it is still marked
* up when it is actually down
*/
if (!bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
bond_set_slave_link_state(slave, BOND_LINK_DOWN,
BOND_SLAVE_NOTIFY_LATER);
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_LATER);
slave_info(bond->dev, slave->dev, "backup interface is now down\n");
}
if (slave == curr_arp_slave)
found = true;
}
if (!new_slave && before)
new_slave = before;
if (!new_slave)
goto check_state;
bond_set_slave_link_state(new_slave, BOND_LINK_BACK,
BOND_SLAVE_NOTIFY_LATER);
bond_set_slave_active_flags(new_slave, BOND_SLAVE_NOTIFY_LATER);
bond_arp_send_all(bond, new_slave);
new_slave->last_link_up = jiffies;
rcu_assign_pointer(bond->current_arp_slave, new_slave);
check_state:
bond_for_each_slave_rcu(bond, slave, iter) {
if (slave->should_notify || slave->should_notify_link) {
should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW;
break;
}
}
return should_notify_rtnl;
}
static void bond_activebackup_arp_mon(struct bonding *bond)
{
bool should_notify_peers = false;
bool should_notify_rtnl = false;
int delta_in_ticks;
delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
if (!bond_has_slaves(bond))
goto re_arm;
rcu_read_lock();
should_notify_peers = bond_should_notify_peers(bond);
if (bond_ab_arp_inspect(bond)) {
rcu_read_unlock();
/* Race avoidance with bond_close flush of workqueue */
if (!rtnl_trylock()) {
delta_in_ticks = 1;
should_notify_peers = false;
goto re_arm;
}
bond_ab_arp_commit(bond);
rtnl_unlock();
rcu_read_lock();
}
should_notify_rtnl = bond_ab_arp_probe(bond);
rcu_read_unlock();
re_arm:
if (bond->params.arp_interval)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
if (should_notify_peers || should_notify_rtnl) {
if (!rtnl_trylock())
return;
if (should_notify_peers)
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS,
bond->dev);
if (should_notify_rtnl) {
bond_slave_state_notify(bond);
bond_slave_link_notify(bond);
}
rtnl_unlock();
}
}
static void bond_arp_monitor(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
arp_work.work);
if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP)
bond_activebackup_arp_mon(bond);
else
bond_loadbalance_arp_mon(bond);
}
/*-------------------------- netdev event handling --------------------------*/
/* Change device name */
static int bond_event_changename(struct bonding *bond)
{
bond_remove_proc_entry(bond);
bond_create_proc_entry(bond);
bond_debug_reregister(bond);
return NOTIFY_DONE;
}
static int bond_master_netdev_event(unsigned long event,
struct net_device *bond_dev)
{
struct bonding *event_bond = netdev_priv(bond_dev);
netdev_dbg(bond_dev, "%s called\n", __func__);
switch (event) {
case NETDEV_CHANGENAME:
return bond_event_changename(event_bond);
case NETDEV_UNREGISTER:
bond_remove_proc_entry(event_bond);
break;
case NETDEV_REGISTER:
bond_create_proc_entry(event_bond);
break;
default:
break;
}
return NOTIFY_DONE;
}
static int bond_slave_netdev_event(unsigned long event,
struct net_device *slave_dev)
{
struct slave *slave = bond_slave_get_rtnl(slave_dev), *primary;
struct bonding *bond;
struct net_device *bond_dev;
/* A netdev event can be generated while enslaving a device
* before netdev_rx_handler_register is called in which case
* slave will be NULL
*/
if (!slave) {
netdev_dbg(slave_dev, "%s called on NULL slave\n", __func__);
return NOTIFY_DONE;
}
bond_dev = slave->bond->dev;
bond = slave->bond;
primary = rtnl_dereference(bond->primary_slave);
slave_dbg(bond_dev, slave_dev, "%s called\n", __func__);
switch (event) {
case NETDEV_UNREGISTER:
if (bond_dev->type != ARPHRD_ETHER)
bond_release_and_destroy(bond_dev, slave_dev);
else
__bond_release_one(bond_dev, slave_dev, false, true);
break;
case NETDEV_UP:
case NETDEV_CHANGE:
/* For 802.3ad mode only:
* Getting invalid Speed/Duplex values here will put slave
* in weird state. Mark it as link-fail if the link was
* previously up or link-down if it hasn't yet come up, and
* let link-monitoring (miimon) set it right when correct
* speeds/duplex are available.
*/
if (bond_update_speed_duplex(slave) &&
BOND_MODE(bond) == BOND_MODE_8023AD) {
if (slave->last_link_up)
slave->link = BOND_LINK_FAIL;
else
slave->link = BOND_LINK_DOWN;
}
if (BOND_MODE(bond) == BOND_MODE_8023AD)
bond_3ad_adapter_speed_duplex_changed(slave);
/* Fallthrough */
case NETDEV_DOWN:
/* Refresh slave-array if applicable!
* If the setup does not use miimon or arpmon (mode-specific!),
* then these events will not cause the slave-array to be
* refreshed. This will cause xmit to use a slave that is not
* usable. Avoid such situation by refeshing the array at these
* events. If these (miimon/arpmon) parameters are configured
* then array gets refreshed twice and that should be fine!
*/
if (bond_mode_can_use_xmit_hash(bond))
bond_update_slave_arr(bond, NULL);
break;
case NETDEV_CHANGEMTU:
/* TODO: Should slaves be allowed to
* independently alter their MTU? For
* an active-backup bond, slaves need
* not be the same type of device, so
* MTUs may vary. For other modes,
* slaves arguably should have the
* same MTUs. To do this, we'd need to
* take over the slave's change_mtu
* function for the duration of their
* servitude.
*/
break;
case NETDEV_CHANGENAME:
/* we don't care if we don't have primary set */
if (!bond_uses_primary(bond) ||
!bond->params.primary[0])
break;
if (slave == primary) {
/* slave's name changed - he's no longer primary */
RCU_INIT_POINTER(bond->primary_slave, NULL);
} else if (!strcmp(slave_dev->name, bond->params.primary)) {
/* we have a new primary slave */
rcu_assign_pointer(bond->primary_slave, slave);
} else { /* we didn't change primary - exit */
break;
}
netdev_info(bond->dev, "Primary slave changed to %s, reselecting active slave\n",
primary ? slave_dev->name : "none");
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
break;
case NETDEV_FEAT_CHANGE:
bond_compute_features(bond);
break;
case NETDEV_RESEND_IGMP:
/* Propagate to master device */
call_netdevice_notifiers(event, slave->bond->dev);
break;
default:
break;
}
return NOTIFY_DONE;
}
/* bond_netdev_event: handle netdev notifier chain events.
*
* This function receives events for the netdev chain. The caller (an
* ioctl handler calling blocking_notifier_call_chain) holds the necessary
* locks for us to safely manipulate the slave devices (RTNL lock,
* dev_probe_lock).
*/
static int bond_netdev_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
netdev_dbg(event_dev, "%s received %s\n",
__func__, netdev_cmd_to_name(event));
if (!(event_dev->priv_flags & IFF_BONDING))
return NOTIFY_DONE;
if (event_dev->flags & IFF_MASTER) {
int ret;
ret = bond_master_netdev_event(event, event_dev);
if (ret != NOTIFY_DONE)
return ret;
}
if (event_dev->flags & IFF_SLAVE)
return bond_slave_netdev_event(event, event_dev);
return NOTIFY_DONE;
}
static struct notifier_block bond_netdev_notifier = {
.notifier_call = bond_netdev_event,
};
/*---------------------------- Hashing Policies -----------------------------*/
/* L2 hash helper */
static inline u32 bond_eth_hash(struct sk_buff *skb)
{
struct ethhdr *ep, hdr_tmp;
ep = skb_header_pointer(skb, 0, sizeof(hdr_tmp), &hdr_tmp);
if (ep)
return ep->h_dest[5] ^ ep->h_source[5] ^ ep->h_proto;
return 0;
}
/* Extract the appropriate headers based on bond's xmit policy */
static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb,
struct flow_keys *fk)
{
const struct ipv6hdr *iph6;
const struct iphdr *iph;
int noff, proto = -1;
if (bond->params.xmit_policy > BOND_XMIT_POLICY_LAYER23)
return skb_flow_dissect_flow_keys(skb, fk, 0);
fk->ports.ports = 0;
noff = skb_network_offset(skb);
if (skb->protocol == htons(ETH_P_IP)) {
if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
return false;
iph = ip_hdr(skb);
iph_to_flow_copy_v4addrs(fk, iph);
noff += iph->ihl << 2;
if (!ip_is_fragment(iph))
proto = iph->protocol;
} else if (skb->protocol == htons(ETH_P_IPV6)) {
if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph6))))
return false;
iph6 = ipv6_hdr(skb);
iph_to_flow_copy_v6addrs(fk, iph6);
noff += sizeof(*iph6);
proto = iph6->nexthdr;
} else {
return false;
}
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34 && proto >= 0)
fk->ports.ports = skb_flow_get_ports(skb, noff, proto);
return true;
}
/**
* bond_xmit_hash - generate a hash value based on the xmit policy
* @bond: bonding device
* @skb: buffer to use for headers
*
* This function will extract the necessary headers from the skb buffer and use
* them to generate a hash based on the xmit_policy set in the bonding device
*/
u32 bond_xmit_hash(struct bonding *bond, struct sk_buff *skb)
{
struct flow_keys flow;
u32 hash;
if (bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP34 &&
skb->l4_hash)
return skb->hash;
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER2 ||
!bond_flow_dissect(bond, skb, &flow))
return bond_eth_hash(skb);
if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER23 ||
bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP23)
hash = bond_eth_hash(skb);
else
hash = (__force u32)flow.ports.ports;
hash ^= (__force u32)flow_get_u32_dst(&flow) ^
(__force u32)flow_get_u32_src(&flow);
hash ^= (hash >> 16);
hash ^= (hash >> 8);
return hash >> 1;
}
/*-------------------------- Device entry points ----------------------------*/
void bond_work_init_all(struct bonding *bond)
{
INIT_DELAYED_WORK(&bond->mcast_work,
bond_resend_igmp_join_requests_delayed);
INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
INIT_DELAYED_WORK(&bond->arp_work, bond_arp_monitor);
INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
INIT_DELAYED_WORK(&bond->slave_arr_work, bond_slave_arr_handler);
}
static void bond_work_cancel_all(struct bonding *bond)
{
cancel_delayed_work_sync(&bond->mii_work);
cancel_delayed_work_sync(&bond->arp_work);
cancel_delayed_work_sync(&bond->alb_work);
cancel_delayed_work_sync(&bond->ad_work);
cancel_delayed_work_sync(&bond->mcast_work);
cancel_delayed_work_sync(&bond->slave_arr_work);
}
static int bond_open(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct list_head *iter;
struct slave *slave;
/* reset slave->backup and slave->inactive */
if (bond_has_slaves(bond)) {
bond_for_each_slave(bond, slave, iter) {
if (bond_uses_primary(bond) &&
slave != rcu_access_pointer(bond->curr_active_slave)) {
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
} else if (BOND_MODE(bond) != BOND_MODE_8023AD) {
bond_set_slave_active_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
}
}
}
if (bond_is_lb(bond)) {
/* bond_alb_initialize must be called before the timer
* is started.
*/
if (bond_alb_initialize(bond, (BOND_MODE(bond) == BOND_MODE_ALB)))
return -ENOMEM;
if (bond->params.tlb_dynamic_lb || BOND_MODE(bond) == BOND_MODE_ALB)
queue_delayed_work(bond->wq, &bond->alb_work, 0);
}
if (bond->params.miimon) /* link check interval, in milliseconds. */
queue_delayed_work(bond->wq, &bond->mii_work, 0);
if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
queue_delayed_work(bond->wq, &bond->arp_work, 0);
bond->recv_probe = bond_arp_rcv;
}
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
queue_delayed_work(bond->wq, &bond->ad_work, 0);
/* register to receive LACPDUs */
bond->recv_probe = bond_3ad_lacpdu_recv;
bond_3ad_initiate_agg_selection(bond, 1);
}
if (bond_mode_can_use_xmit_hash(bond))
bond_update_slave_arr(bond, NULL);
return 0;
}
static int bond_close(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
bond_work_cancel_all(bond);
bond->send_peer_notif = 0;
if (bond_is_lb(bond))
bond_alb_deinitialize(bond);
bond->recv_probe = NULL;
return 0;
}
/* fold stats, assuming all rtnl_link_stats64 fields are u64, but
* that some drivers can provide 32bit values only.
*/
static void bond_fold_stats(struct rtnl_link_stats64 *_res,
const struct rtnl_link_stats64 *_new,
const struct rtnl_link_stats64 *_old)
{
const u64 *new = (const u64 *)_new;
const u64 *old = (const u64 *)_old;
u64 *res = (u64 *)_res;
int i;
for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) {
u64 nv = new[i];
u64 ov = old[i];
s64 delta = nv - ov;
/* detects if this particular field is 32bit only */
if (((nv | ov) >> 32) == 0)
delta = (s64)(s32)((u32)nv - (u32)ov);
/* filter anomalies, some drivers reset their stats
* at down/up events.
*/
if (delta > 0)
res[i] += delta;
}
}
static int bond_get_nest_level(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
return bond->nest_level;
}
static void bond_get_stats(struct net_device *bond_dev,
struct rtnl_link_stats64 *stats)
{
struct bonding *bond = netdev_priv(bond_dev);
struct rtnl_link_stats64 temp;
struct list_head *iter;
struct slave *slave;
spin_lock_nested(&bond->stats_lock, bond_get_nest_level(bond_dev));
memcpy(stats, &bond->bond_stats, sizeof(*stats));
rcu_read_lock();
bond_for_each_slave_rcu(bond, slave, iter) {
const struct rtnl_link_stats64 *new =
dev_get_stats(slave->dev, &temp);
bond_fold_stats(stats, new, &slave->slave_stats);
/* save off the slave stats for the next run */
memcpy(&slave->slave_stats, new, sizeof(*new));
}
rcu_read_unlock();
memcpy(&bond->bond_stats, stats, sizeof(*stats));
spin_unlock(&bond->stats_lock);
}
static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
{
struct bonding *bond = netdev_priv(bond_dev);
struct net_device *slave_dev = NULL;
struct ifbond k_binfo;
struct ifbond __user *u_binfo = NULL;
struct ifslave k_sinfo;
struct ifslave __user *u_sinfo = NULL;
struct mii_ioctl_data *mii = NULL;
struct bond_opt_value newval;
struct net *net;
int res = 0;
netdev_dbg(bond_dev, "bond_ioctl: cmd=%d\n", cmd);
switch (cmd) {
case SIOCGMIIPHY:
mii = if_mii(ifr);
if (!mii)
return -EINVAL;
mii->phy_id = 0;
/* Fall Through */
case SIOCGMIIREG:
/* We do this again just in case we were called by SIOCGMIIREG
* instead of SIOCGMIIPHY.
*/
mii = if_mii(ifr);
if (!mii)
return -EINVAL;
if (mii->reg_num == 1) {
mii->val_out = 0;
if (netif_carrier_ok(bond->dev))
mii->val_out = BMSR_LSTATUS;
}
return 0;
case BOND_INFO_QUERY_OLD:
case SIOCBONDINFOQUERY:
u_binfo = (struct ifbond __user *)ifr->ifr_data;
if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
return -EFAULT;
bond_info_query(bond_dev, &k_binfo);
if (copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
return -EFAULT;
return 0;
case BOND_SLAVE_INFO_QUERY_OLD:
case SIOCBONDSLAVEINFOQUERY:
u_sinfo = (struct ifslave __user *)ifr->ifr_data;
if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
return -EFAULT;
res = bond_slave_info_query(bond_dev, &k_sinfo);
if (res == 0 &&
copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
return -EFAULT;
return res;
default:
break;
}
net = dev_net(bond_dev);
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev);
if (!slave_dev)
return -ENODEV;
switch (cmd) {
case BOND_ENSLAVE_OLD:
case SIOCBONDENSLAVE:
res = bond_enslave(bond_dev, slave_dev, NULL);
break;
case BOND_RELEASE_OLD:
case SIOCBONDRELEASE:
res = bond_release(bond_dev, slave_dev);
break;
case BOND_SETHWADDR_OLD:
case SIOCBONDSETHWADDR:
res = bond_set_dev_addr(bond_dev, slave_dev);
break;
case BOND_CHANGE_ACTIVE_OLD:
case SIOCBONDCHANGEACTIVE:
bond_opt_initstr(&newval, slave_dev->name);
res = __bond_opt_set_notify(bond, BOND_OPT_ACTIVE_SLAVE,
&newval);
break;
default:
res = -EOPNOTSUPP;
}
return res;
}
static void bond_change_rx_flags(struct net_device *bond_dev, int change)
{
struct bonding *bond = netdev_priv(bond_dev);
if (change & IFF_PROMISC)
bond_set_promiscuity(bond,
bond_dev->flags & IFF_PROMISC ? 1 : -1);
if (change & IFF_ALLMULTI)
bond_set_allmulti(bond,
bond_dev->flags & IFF_ALLMULTI ? 1 : -1);
}
static void bond_set_rx_mode(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct list_head *iter;
struct slave *slave;
rcu_read_lock();
if (bond_uses_primary(bond)) {
slave = rcu_dereference(bond->curr_active_slave);
if (slave) {
dev_uc_sync(slave->dev, bond_dev);
dev_mc_sync(slave->dev, bond_dev);
}
} else {
bond_for_each_slave_rcu(bond, slave, iter) {
dev_uc_sync_multiple(slave->dev, bond_dev);
dev_mc_sync_multiple(slave->dev, bond_dev);
}
}
rcu_read_unlock();
}
static int bond_neigh_init(struct neighbour *n)
{
struct bonding *bond = netdev_priv(n->dev);
const struct net_device_ops *slave_ops;
struct neigh_parms parms;
struct slave *slave;
int ret;
slave = bond_first_slave(bond);
if (!slave)
return 0;
slave_ops = slave->dev->netdev_ops;
if (!slave_ops->ndo_neigh_setup)
return 0;
parms.neigh_setup = NULL;
parms.neigh_cleanup = NULL;
ret = slave_ops->ndo_neigh_setup(slave->dev, &parms);
if (ret)
return ret;
/* Assign slave's neigh_cleanup to neighbour in case cleanup is called
* after the last slave has been detached. Assumes that all slaves
* utilize the same neigh_cleanup (true at this writing as only user
* is ipoib).
*/
n->parms->neigh_cleanup = parms.neigh_cleanup;
if (!parms.neigh_setup)
return 0;
return parms.neigh_setup(n);
}
/* The bonding ndo_neigh_setup is called at init time beofre any
* slave exists. So we must declare proxy setup function which will
* be used at run time to resolve the actual slave neigh param setup.
*
* It's also called by master devices (such as vlans) to setup their
* underlying devices. In that case - do nothing, we're already set up from
* our init.
*/
static int bond_neigh_setup(struct net_device *dev,
struct neigh_parms *parms)
{
/* modify only our neigh_parms */
if (parms->dev == dev)
parms->neigh_setup = bond_neigh_init;
return 0;
}
/* Change the MTU of all of a master's slaves to match the master */
static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *rollback_slave;
struct list_head *iter;
int res = 0;
netdev_dbg(bond_dev, "bond=%p, new_mtu=%d\n", bond, new_mtu);
bond_for_each_slave(bond, slave, iter) {
slave_dbg(bond_dev, slave->dev, "s %p c_m %p\n",
slave, slave->dev->netdev_ops->ndo_change_mtu);
res = dev_set_mtu(slave->dev, new_mtu);
if (res) {
/* If we failed to set the slave's mtu to the new value
* we must abort the operation even in ACTIVE_BACKUP
* mode, because if we allow the backup slaves to have
* different mtu values than the active slave we'll
* need to change their mtu when doing a failover. That
* means changing their mtu from timer context, which
* is probably not a good idea.
*/
slave_dbg(bond_dev, slave->dev, "err %d setting mtu to %d\n",
res, new_mtu);
goto unwind;
}
}
bond_dev->mtu = new_mtu;
return 0;
unwind:
/* unwind from head to the slave that failed */
bond_for_each_slave(bond, rollback_slave, iter) {
int tmp_res;
if (rollback_slave == slave)
break;
tmp_res = dev_set_mtu(rollback_slave->dev, bond_dev->mtu);
if (tmp_res)
slave_dbg(bond_dev, rollback_slave->dev, "unwind err %d\n",
tmp_res);
}
return res;
}
/* Change HW address
*
* Note that many devices must be down to change the HW address, and
* downing the master releases all slaves. We can make bonds full of
* bonding devices to test this, however.
*/
static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *rollback_slave;
struct sockaddr_storage *ss = addr, tmp_ss;
struct list_head *iter;
int res = 0;
if (BOND_MODE(bond) == BOND_MODE_ALB)
return bond_alb_set_mac_address(bond_dev, addr);
netdev_dbg(bond_dev, "%s: bond=%p\n", __func__, bond);
/* If fail_over_mac is enabled, do nothing and return success.
* Returning an error causes ifenslave to fail.
*/
if (bond->params.fail_over_mac &&
BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP)
return 0;
if (!is_valid_ether_addr(ss->__data))
return -EADDRNOTAVAIL;
bond_for_each_slave(bond, slave, iter) {
slave_dbg(bond_dev, slave->dev, "%s: slave=%p\n",
__func__, slave);
res = dev_set_mac_address(slave->dev, addr, NULL);
if (res) {
/* TODO: consider downing the slave
* and retry ?
* User should expect communications
* breakage anyway until ARP finish
* updating, so...
*/
slave_dbg(bond_dev, slave->dev, "%s: err %d\n",
__func__, res);
goto unwind;
}
}
/* success */
memcpy(bond_dev->dev_addr, ss->__data, bond_dev->addr_len);
return 0;
unwind:
memcpy(tmp_ss.__data, bond_dev->dev_addr, bond_dev->addr_len);
tmp_ss.ss_family = bond_dev->type;
/* unwind from head to the slave that failed */
bond_for_each_slave(bond, rollback_slave, iter) {
int tmp_res;
if (rollback_slave == slave)
break;
tmp_res = dev_set_mac_address(rollback_slave->dev,
(struct sockaddr *)&tmp_ss, NULL);
if (tmp_res) {
slave_dbg(bond_dev, rollback_slave->dev, "%s: unwind err %d\n",
__func__, tmp_res);
}
}
return res;
}
/**
* bond_xmit_slave_id - transmit skb through slave with slave_id
* @bond: bonding device that is transmitting
* @skb: buffer to transmit
* @slave_id: slave id up to slave_cnt-1 through which to transmit
*
* This function tries to transmit through slave with slave_id but in case
* it fails, it tries to find the first available slave for transmission.
* The skb is consumed in all cases, thus the function is void.
*/
static void bond_xmit_slave_id(struct bonding *bond, struct sk_buff *skb, int slave_id)
{
struct list_head *iter;
struct slave *slave;
int i = slave_id;
/* Here we start from the slave with slave_id */
bond_for_each_slave_rcu(bond, slave, iter) {
if (--i < 0) {
if (bond_slave_can_tx(slave)) {
bond_dev_queue_xmit(bond, skb, slave->dev);
return;
}
}
}
/* Here we start from the first slave up to slave_id */
i = slave_id;
bond_for_each_slave_rcu(bond, slave, iter) {
if (--i < 0)
break;
if (bond_slave_can_tx(slave)) {
bond_dev_queue_xmit(bond, skb, slave->dev);
return;
}
}
/* no slave that can tx has been found */
bond_tx_drop(bond->dev, skb);
}
/**
* bond_rr_gen_slave_id - generate slave id based on packets_per_slave
* @bond: bonding device to use
*
* Based on the value of the bonding device's packets_per_slave parameter
* this function generates a slave id, which is usually used as the next
* slave to transmit through.
*/
static u32 bond_rr_gen_slave_id(struct bonding *bond)
{
u32 slave_id;
struct reciprocal_value reciprocal_packets_per_slave;
int packets_per_slave = bond->params.packets_per_slave;
switch (packets_per_slave) {
case 0:
slave_id = prandom_u32();
break;
case 1:
slave_id = bond->rr_tx_counter;
break;
default:
reciprocal_packets_per_slave =
bond->params.reciprocal_packets_per_slave;
slave_id = reciprocal_divide(bond->rr_tx_counter,
reciprocal_packets_per_slave);
break;
}
bond->rr_tx_counter++;
return slave_id;
}
static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb,
struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
int slave_cnt;
u32 slave_id;
/* Start with the curr_active_slave that joined the bond as the
* default for sending IGMP traffic. For failover purposes one
* needs to maintain some consistency for the interface that will
* send the join/membership reports. The curr_active_slave found
* will send all of this type of traffic.
*/
if (skb->protocol == htons(ETH_P_IP)) {
int noff = skb_network_offset(skb);
struct iphdr *iph;
if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
goto non_igmp;
iph = ip_hdr(skb);
if (iph->protocol == IPPROTO_IGMP) {
slave = rcu_dereference(bond->curr_active_slave);
if (slave)
bond_dev_queue_xmit(bond, skb, slave->dev);
else
bond_xmit_slave_id(bond, skb, 0);
return NETDEV_TX_OK;
}
}
non_igmp:
slave_cnt = READ_ONCE(bond->slave_cnt);
if (likely(slave_cnt)) {
slave_id = bond_rr_gen_slave_id(bond);
bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
} else {
bond_tx_drop(bond_dev, skb);
}
return NETDEV_TX_OK;
}
/* In active-backup mode, we know that bond->curr_active_slave is always valid if
* the bond has a usable interface.
*/
static netdev_tx_t bond_xmit_activebackup(struct sk_buff *skb,
struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
slave = rcu_dereference(bond->curr_active_slave);
if (slave)
bond_dev_queue_xmit(bond, skb, slave->dev);
else
bond_tx_drop(bond_dev, skb);
return NETDEV_TX_OK;
}
/* Use this to update slave_array when (a) it's not appropriate to update
* slave_array right away (note that update_slave_array() may sleep)
* and / or (b) RTNL is not held.
*/
void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay)
{
queue_delayed_work(bond->wq, &bond->slave_arr_work, delay);
}
/* Slave array work handler. Holds only RTNL */
static void bond_slave_arr_handler(struct work_struct *work)
{
struct bonding *bond = container_of(work, struct bonding,
slave_arr_work.work);
int ret;
if (!rtnl_trylock())
goto err;
ret = bond_update_slave_arr(bond, NULL);
rtnl_unlock();
if (ret) {
pr_warn_ratelimited("Failed to update slave array from WT\n");
goto err;
}
return;
err:
bond_slave_arr_work_rearm(bond, 1);
}
/* Build the usable slaves array in control path for modes that use xmit-hash
* to determine the slave interface -
* (a) BOND_MODE_8023AD
* (b) BOND_MODE_XOR
* (c) (BOND_MODE_TLB || BOND_MODE_ALB) && tlb_dynamic_lb == 0
*
* The caller is expected to hold RTNL only and NO other lock!
*/
int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave)
{
struct slave *slave;
struct list_head *iter;
struct bond_up_slave *new_arr, *old_arr;
int agg_id = 0;
int ret = 0;
#ifdef CONFIG_LOCKDEP
WARN_ON(lockdep_is_held(&bond->mode_lock));
#endif
new_arr = kzalloc(offsetof(struct bond_up_slave, arr[bond->slave_cnt]),
GFP_KERNEL);
if (!new_arr) {
ret = -ENOMEM;
pr_err("Failed to build slave-array.\n");
goto out;
}
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct ad_info ad_info;
if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
pr_debug("bond_3ad_get_active_agg_info failed\n");
kfree_rcu(new_arr, rcu);
/* No active aggragator means it's not safe to use
* the previous array.
*/
old_arr = rtnl_dereference(bond->slave_arr);
if (old_arr) {
RCU_INIT_POINTER(bond->slave_arr, NULL);
kfree_rcu(old_arr, rcu);
}
goto out;
}
agg_id = ad_info.aggregator_id;
}
bond_for_each_slave(bond, slave, iter) {
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct aggregator *agg;
agg = SLAVE_AD_INFO(slave)->port.aggregator;
if (!agg || agg->aggregator_identifier != agg_id)
continue;
}
if (!bond_slave_can_tx(slave))
continue;
if (skipslave == slave)
continue;
slave_dbg(bond->dev, slave->dev, "Adding slave to tx hash array[%d]\n",
new_arr->count);
new_arr->arr[new_arr->count++] = slave;
}
old_arr = rtnl_dereference(bond->slave_arr);
rcu_assign_pointer(bond->slave_arr, new_arr);
if (old_arr)
kfree_rcu(old_arr, rcu);
out:
if (ret != 0 && skipslave) {
int idx;
/* Rare situation where caller has asked to skip a specific
* slave but allocation failed (most likely!). BTW this is
* only possible when the call is initiated from
* __bond_release_one(). In this situation; overwrite the
* skipslave entry in the array with the last entry from the
* array to avoid a situation where the xmit path may choose
* this to-be-skipped slave to send a packet out.
*/
old_arr = rtnl_dereference(bond->slave_arr);
for (idx = 0; old_arr != NULL && idx < old_arr->count; idx++) {
if (skipslave == old_arr->arr[idx]) {
old_arr->arr[idx] =
old_arr->arr[old_arr->count-1];
old_arr->count--;
break;
}
}
}
return ret;
}
/* Use this Xmit function for 3AD as well as XOR modes. The current
* usable slave array is formed in the control path. The xmit function
* just calculates hash and sends the packet out.
*/
static netdev_tx_t bond_3ad_xor_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct bonding *bond = netdev_priv(dev);
struct slave *slave;
struct bond_up_slave *slaves;
unsigned int count;
slaves = rcu_dereference(bond->slave_arr);
count = slaves ? READ_ONCE(slaves->count) : 0;
if (likely(count)) {
slave = slaves->arr[bond_xmit_hash(bond, skb) % count];
bond_dev_queue_xmit(bond, skb, slave->dev);
} else {
bond_tx_drop(dev, skb);
}
return NETDEV_TX_OK;
}
/* in broadcast mode, we send everything to all usable interfaces. */
static netdev_tx_t bond_xmit_broadcast(struct sk_buff *skb,
struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave = NULL;
struct list_head *iter;
bond_for_each_slave_rcu(bond, slave, iter) {
if (bond_is_last_slave(bond, slave))
break;
if (bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
bond_dev->name, __func__);
continue;
}
bond_dev_queue_xmit(bond, skb2, slave->dev);
}
}
if (slave && bond_slave_is_up(slave) && slave->link == BOND_LINK_UP)
bond_dev_queue_xmit(bond, skb, slave->dev);
else
bond_tx_drop(bond_dev, skb);
return NETDEV_TX_OK;
}
/*------------------------- Device initialization ---------------------------*/
/* Lookup the slave that corresponds to a qid */
static inline int bond_slave_override(struct bonding *bond,
struct sk_buff *skb)
{
struct slave *slave = NULL;
struct list_head *iter;
if (!skb_rx_queue_recorded(skb))
return 1;
/* Find out if any slaves have the same mapping as this skb. */
bond_for_each_slave_rcu(bond, slave, iter) {
if (slave->queue_id == skb_get_queue_mapping(skb)) {
if (bond_slave_is_up(slave) &&
slave->link == BOND_LINK_UP) {
bond_dev_queue_xmit(bond, skb, slave->dev);
return 0;
}
/* If the slave isn't UP, use default transmit policy. */
break;
}
}
return 1;
}
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb,
struct net_device *sb_dev)
{
/* This helper function exists to help dev_pick_tx get the correct
* destination queue. Using a helper function skips a call to
* skb_tx_hash and will put the skbs in the queue we expect on their
* way down to the bonding driver.
*/
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
/* Save the original txq to restore before passing to the driver */
qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb_get_queue_mapping(skb);
if (unlikely(txq >= dev->real_num_tx_queues)) {
do {
txq -= dev->real_num_tx_queues;
} while (txq >= dev->real_num_tx_queues);
}
return txq;
}
static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bonding *bond = netdev_priv(dev);
if (bond_should_override_tx_queue(bond) &&
!bond_slave_override(bond, skb))
return NETDEV_TX_OK;
switch (BOND_MODE(bond)) {
case BOND_MODE_ROUNDROBIN:
return bond_xmit_roundrobin(skb, dev);
case BOND_MODE_ACTIVEBACKUP:
return bond_xmit_activebackup(skb, dev);
case BOND_MODE_8023AD:
case BOND_MODE_XOR:
return bond_3ad_xor_xmit(skb, dev);
case BOND_MODE_BROADCAST:
return bond_xmit_broadcast(skb, dev);
case BOND_MODE_ALB:
return bond_alb_xmit(skb, dev);
case BOND_MODE_TLB:
return bond_tlb_xmit(skb, dev);
default:
/* Should never happen, mode already checked */
netdev_err(dev, "Unknown bonding mode %d\n", BOND_MODE(bond));
WARN_ON_ONCE(1);
bond_tx_drop(dev, skb);
return NETDEV_TX_OK;
}
}
static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bonding *bond = netdev_priv(dev);
netdev_tx_t ret = NETDEV_TX_OK;
/* If we risk deadlock from transmitting this in the
* netpoll path, tell netpoll to queue the frame for later tx
*/
if (unlikely(is_netpoll_tx_blocked(dev)))
return NETDEV_TX_BUSY;
rcu_read_lock();
if (bond_has_slaves(bond))
ret = __bond_start_xmit(skb, dev);
else
bond_tx_drop(dev, skb);
rcu_read_unlock();
return ret;
}
static int bond_ethtool_get_link_ksettings(struct net_device *bond_dev,
struct ethtool_link_ksettings *cmd)
{
struct bonding *bond = netdev_priv(bond_dev);
unsigned long speed = 0;
struct list_head *iter;
struct slave *slave;
cmd->base.duplex = DUPLEX_UNKNOWN;
cmd->base.port = PORT_OTHER;
/* Since bond_slave_can_tx returns false for all inactive or down slaves, we
* do not need to check mode. Though link speed might not represent
* the true receive or transmit bandwidth (not all modes are symmetric)
* this is an accurate maximum.
*/
bond_for_each_slave(bond, slave, iter) {
if (bond_slave_can_tx(slave)) {
if (slave->speed != SPEED_UNKNOWN)
speed += slave->speed;
if (cmd->base.duplex == DUPLEX_UNKNOWN &&
slave->duplex != DUPLEX_UNKNOWN)
cmd->base.duplex = slave->duplex;
}
}
cmd->base.speed = speed ? : SPEED_UNKNOWN;
return 0;
}
static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
struct ethtool_drvinfo *drvinfo)
{
strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d",
BOND_ABI_VERSION);
}
static const struct ethtool_ops bond_ethtool_ops = {
.get_drvinfo = bond_ethtool_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_link_ksettings = bond_ethtool_get_link_ksettings,
};
static const struct net_device_ops bond_netdev_ops = {
.ndo_init = bond_init,
.ndo_uninit = bond_uninit,
.ndo_open = bond_open,
.ndo_stop = bond_close,
.ndo_start_xmit = bond_start_xmit,
.ndo_select_queue = bond_select_queue,
.ndo_get_stats64 = bond_get_stats,
.ndo_do_ioctl = bond_do_ioctl,
.ndo_change_rx_flags = bond_change_rx_flags,
.ndo_set_rx_mode = bond_set_rx_mode,
.ndo_change_mtu = bond_change_mtu,
.ndo_set_mac_address = bond_set_mac_address,
.ndo_neigh_setup = bond_neigh_setup,
.ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
.ndo_get_lock_subclass = bond_get_nest_level,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_netpoll_setup = bond_netpoll_setup,
.ndo_netpoll_cleanup = bond_netpoll_cleanup,
.ndo_poll_controller = bond_poll_controller,
#endif
.ndo_add_slave = bond_enslave,
.ndo_del_slave = bond_release,
.ndo_fix_features = bond_fix_features,
.ndo_features_check = passthru_features_check,
};
static const struct device_type bond_type = {
.name = "bond",
};
static void bond_destructor(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
if (bond->wq)
destroy_workqueue(bond->wq);
}
void bond_setup(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
spin_lock_init(&bond->mode_lock);
spin_lock_init(&bond->stats_lock);
bond->params = bonding_defaults;
/* Initialize pointers */
bond->dev = bond_dev;
/* Initialize the device entry points */
ether_setup(bond_dev);
bond_dev->max_mtu = ETH_MAX_MTU;
bond_dev->netdev_ops = &bond_netdev_ops;
bond_dev->ethtool_ops = &bond_ethtool_ops;
bond_dev->needs_free_netdev = true;
bond_dev->priv_destructor = bond_destructor;
SET_NETDEV_DEVTYPE(bond_dev, &bond_type);
/* Initialize the device options */
bond_dev->flags |= IFF_MASTER;
bond_dev->priv_flags |= IFF_BONDING | IFF_UNICAST_FLT | IFF_NO_QUEUE;
bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
/* don't acquire bond device's netif_tx_lock when transmitting */
bond_dev->features |= NETIF_F_LLTX;
/* By default, we declare the bond to be fully
* VLAN hardware accelerated capable. Special
* care is taken in the various xmit functions
* when there are slaves that are not hw accel
* capable
*/
/* Don't allow bond devices to change network namespaces. */
bond_dev->features |= NETIF_F_NETNS_LOCAL;
bond_dev->hw_features = BOND_VLAN_FEATURES |
NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_FILTER;
bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL | NETIF_F_GSO_UDP_L4;
bond_dev->features |= bond_dev->hw_features;
bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX;
}
/* Destroy a bonding device.
* Must be under rtnl_lock when this function is called.
*/
static void bond_uninit(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct list_head *iter;
struct slave *slave;
struct bond_up_slave *arr;
bond_netpoll_cleanup(bond_dev);
/* Release the bonded slaves */
bond_for_each_slave(bond, slave, iter)
__bond_release_one(bond_dev, slave->dev, true, true);
netdev_info(bond_dev, "Released all slaves\n");
arr = rtnl_dereference(bond->slave_arr);
if (arr) {
RCU_INIT_POINTER(bond->slave_arr, NULL);
kfree_rcu(arr, rcu);
}
list_del(&bond->bond_list);
bond_debug_unregister(bond);
}
/*------------------------- Module initialization ---------------------------*/
static int bond_check_params(struct bond_params *params)
{
int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
struct bond_opt_value newval;
const struct bond_opt_value *valptr;
int arp_all_targets_value = 0;
u16 ad_actor_sys_prio = 0;
u16 ad_user_port_key = 0;
__be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };
int arp_ip_count;
int bond_mode = BOND_MODE_ROUNDROBIN;
int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
int lacp_fast = 0;
int tlb_dynamic_lb;
/* Convert string parameters. */
if (mode) {
bond_opt_initstr(&newval, mode);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_MODE), &newval);
if (!valptr) {
pr_err("Error: Invalid bonding mode \"%s\"\n", mode);
return -EINVAL;
}
bond_mode = valptr->value;
}
if (xmit_hash_policy) {
if (bond_mode == BOND_MODE_ROUNDROBIN ||
bond_mode == BOND_MODE_ACTIVEBACKUP ||
bond_mode == BOND_MODE_BROADCAST) {
pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
bond_mode_name(bond_mode));
} else {
bond_opt_initstr(&newval, xmit_hash_policy);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH),
&newval);
if (!valptr) {
pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
xmit_hash_policy);
return -EINVAL;
}
xmit_hashtype = valptr->value;
}
}
if (lacp_rate) {
if (bond_mode != BOND_MODE_8023AD) {
pr_info("lacp_rate param is irrelevant in mode %s\n",
bond_mode_name(bond_mode));
} else {
bond_opt_initstr(&newval, lacp_rate);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_LACP_RATE),
&newval);
if (!valptr) {
pr_err("Error: Invalid lacp rate \"%s\"\n",
lacp_rate);
return -EINVAL;
}
lacp_fast = valptr->value;
}
}
if (ad_select) {
bond_opt_initstr(&newval, ad_select);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT),
&newval);
if (!valptr) {
pr_err("Error: Invalid ad_select \"%s\"\n", ad_select);
return -EINVAL;
}
params->ad_select = valptr->value;
if (bond_mode != BOND_MODE_8023AD)
pr_warn("ad_select param only affects 802.3ad mode\n");
} else {
params->ad_select = BOND_AD_STABLE;
}
if (max_bonds < 0) {
pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
if (miimon < 0) {
pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
miimon, INT_MAX);
miimon = 0;
}
if (updelay < 0) {
pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
updelay, INT_MAX);
updelay = 0;
}
if (downdelay < 0) {
pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
downdelay, INT_MAX);
downdelay = 0;
}
if ((use_carrier != 0) && (use_carrier != 1)) {
pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
use_carrier);
use_carrier = 1;
}
if (num_peer_notif < 0 || num_peer_notif > 255) {
pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
num_peer_notif);
num_peer_notif = 1;
}
/* reset values for 802.3ad/TLB/ALB */
if (!bond_mode_uses_arp(bond_mode)) {
if (!miimon) {
pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
pr_warn("Forcing miimon to 100msec\n");
miimon = BOND_DEFAULT_MIIMON;
}
}
if (tx_queues < 1 || tx_queues > 255) {
pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",
tx_queues, BOND_DEFAULT_TX_QUEUES);
tx_queues = BOND_DEFAULT_TX_QUEUES;
}
if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",
all_slaves_active);
all_slaves_active = 0;
}
if (resend_igmp < 0 || resend_igmp > 255) {
pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",
resend_igmp, BOND_DEFAULT_RESEND_IGMP);
resend_igmp = BOND_DEFAULT_RESEND_IGMP;
}
bond_opt_initval(&newval, packets_per_slave);
if (!bond_opt_parse(bond_opt_get(BOND_OPT_PACKETS_PER_SLAVE), &newval)) {
pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n",
packets_per_slave, USHRT_MAX);
packets_per_slave = 1;
}
if (bond_mode == BOND_MODE_ALB) {
pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
updelay);
}
if (!miimon) {
if (updelay || downdelay) {
/* just warn the user the up/down delay will have
* no effect since miimon is zero...
*/
pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
updelay, downdelay);
}
} else {
/* don't allow arp monitoring */
if (arp_interval) {
pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
miimon, arp_interval);
arp_interval = 0;
}
if ((updelay % miimon) != 0) {
pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
updelay, miimon, (updelay / miimon) * miimon);
}
updelay /= miimon;
if ((downdelay % miimon) != 0) {
pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
downdelay, miimon,
(downdelay / miimon) * miimon);
}
downdelay /= miimon;
}
if (arp_interval < 0) {
pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",
arp_interval, INT_MAX);
arp_interval = 0;
}
for (arp_ip_count = 0, i = 0;
(arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) {
__be32 ip;
/* not a complete check, but good enough to catch mistakes */
if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) ||
!bond_is_ip_target_ok(ip)) {
pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
arp_ip_target[i]);
arp_interval = 0;
} else {
if (bond_get_targets_ip(arp_target, ip) == -1)
arp_target[arp_ip_count++] = ip;
else
pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
&ip);
}
}
if (arp_interval && !arp_ip_count) {
/* don't allow arping if no arp_ip_target given... */
pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
arp_interval);
arp_interval = 0;
}
if (arp_validate) {
if (!arp_interval) {
pr_err("arp_validate requires arp_interval\n");
return -EINVAL;
}
bond_opt_initstr(&newval, arp_validate);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_VALIDATE),
&newval);
if (!valptr) {
pr_err("Error: invalid arp_validate \"%s\"\n",
arp_validate);
return -EINVAL;
}
arp_validate_value = valptr->value;
} else {
arp_validate_value = 0;
}
if (arp_all_targets) {
bond_opt_initstr(&newval, arp_all_targets);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
&newval);
if (!valptr) {
pr_err("Error: invalid arp_all_targets_value \"%s\"\n",
arp_all_targets);
arp_all_targets_value = 0;
} else {
arp_all_targets_value = valptr->value;
}
}
if (miimon) {
pr_info("MII link monitoring set to %d ms\n", miimon);
} else if (arp_interval) {
valptr = bond_opt_get_val(BOND_OPT_ARP_VALIDATE,
arp_validate_value);
pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
arp_interval, valptr->string, arp_ip_count);
for (i = 0; i < arp_ip_count; i++)
pr_cont(" %s", arp_ip_target[i]);
pr_cont("\n");
} else if (max_bonds) {
/* miimon and arp_interval not set, we need one so things
* work as expected, see bonding.txt for details
*/
pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
}
if (primary && !bond_mode_uses_primary(bond_mode)) {
/* currently, using a primary only makes sense
* in active backup, TLB or ALB modes
*/
pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",
primary, bond_mode_name(bond_mode));
primary = NULL;
}
if (primary && primary_reselect) {
bond_opt_initstr(&newval, primary_reselect);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_PRIMARY_RESELECT),
&newval);
if (!valptr) {
pr_err("Error: Invalid primary_reselect \"%s\"\n",
primary_reselect);
return -EINVAL;
}
primary_reselect_value = valptr->value;
} else {
primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
}
if (fail_over_mac) {
bond_opt_initstr(&newval, fail_over_mac);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_FAIL_OVER_MAC),
&newval);
if (!valptr) {
pr_err("Error: invalid fail_over_mac \"%s\"\n",
fail_over_mac);
return -EINVAL;
}
fail_over_mac_value = valptr->value;
if (bond_mode != BOND_MODE_ACTIVEBACKUP)
pr_warn("Warning: fail_over_mac only affects active-backup mode\n");
} else {
fail_over_mac_value = BOND_FOM_NONE;
}
bond_opt_initstr(&newval, "default");
valptr = bond_opt_parse(
bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO),
&newval);
if (!valptr) {
pr_err("Error: No ad_actor_sys_prio default value");
return -EINVAL;
}
ad_actor_sys_prio = valptr->value;
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY),
&newval);
if (!valptr) {
pr_err("Error: No ad_user_port_key default value");
return -EINVAL;
}
ad_user_port_key = valptr->value;
bond_opt_initstr(&newval, "default");
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_TLB_DYNAMIC_LB), &newval);
if (!valptr) {
pr_err("Error: No tlb_dynamic_lb default value");
return -EINVAL;
}
tlb_dynamic_lb = valptr->value;
if (lp_interval == 0) {
pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL);
lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL;
}
/* fill params struct with the proper values */
params->mode = bond_mode;
params->xmit_policy = xmit_hashtype;
params->miimon = miimon;
params->num_peer_notif = num_peer_notif;
params->arp_interval = arp_interval;
params->arp_validate = arp_validate_value;
params->arp_all_targets = arp_all_targets_value;
params->updelay = updelay;
params->downdelay = downdelay;
params->peer_notif_delay = 0;
params->use_carrier = use_carrier;
params->lacp_fast = lacp_fast;
params->primary[0] = 0;
params->primary_reselect = primary_reselect_value;
params->fail_over_mac = fail_over_mac_value;
params->tx_queues = tx_queues;
params->all_slaves_active = all_slaves_active;
params->resend_igmp = resend_igmp;
params->min_links = min_links;
params->lp_interval = lp_interval;
params->packets_per_slave = packets_per_slave;
params->tlb_dynamic_lb = tlb_dynamic_lb;
params->ad_actor_sys_prio = ad_actor_sys_prio;
eth_zero_addr(params->ad_actor_system);
params->ad_user_port_key = ad_user_port_key;
if (packets_per_slave > 0) {
params->reciprocal_packets_per_slave =
reciprocal_value(packets_per_slave);
} else {
/* reciprocal_packets_per_slave is unused if
* packets_per_slave is 0 or 1, just initialize it
*/
params->reciprocal_packets_per_slave =
(struct reciprocal_value) { 0 };
}
if (primary) {
strncpy(params->primary, primary, IFNAMSIZ);
params->primary[IFNAMSIZ - 1] = 0;
}
memcpy(params->arp_targets, arp_target, sizeof(arp_target));
return 0;
}
/* Called from registration process */
static int bond_init(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
netdev_dbg(bond_dev, "Begin bond_init\n");
bond->wq = alloc_ordered_workqueue(bond_dev->name, WQ_MEM_RECLAIM);
if (!bond->wq)
return -ENOMEM;
bond->nest_level = SINGLE_DEPTH_NESTING;
list_add_tail(&bond->bond_list, &bn->dev_list);
bond_prepare_sysfs_group(bond);
bond_debug_register(bond);
/* Ensure valid dev_addr */
if (is_zero_ether_addr(bond_dev->dev_addr) &&
bond_dev->addr_assign_type == NET_ADDR_PERM)
eth_hw_addr_random(bond_dev);
return 0;
}
unsigned int bond_get_num_tx_queues(void)
{
return tx_queues;
}
/* Create a new bond based on the specified name and bonding parameters.
* If name is NULL, obtain a suitable "bond%d" name for us.
* Caller must NOT hold rtnl_lock; we need to release it here before we
* set up our sysfs entries.
*/
int bond_create(struct net *net, const char *name)
{
struct net_device *bond_dev;
struct bonding *bond;
struct alb_bond_info *bond_info;
int res;
rtnl_lock();
bond_dev = alloc_netdev_mq(sizeof(struct bonding),
name ? name : "bond%d", NET_NAME_UNKNOWN,
bond_setup, tx_queues);
if (!bond_dev) {
pr_err("%s: eek! can't alloc netdev!\n", name);
rtnl_unlock();
return -ENOMEM;
}
/*
* Initialize rx_hashtbl_used_head to RLB_NULL_INDEX.
* It is set to 0 by default which is wrong.
*/
bond = netdev_priv(bond_dev);
bond_info = &(BOND_ALB_INFO(bond));
bond_info->rx_hashtbl_used_head = RLB_NULL_INDEX;
dev_net_set(bond_dev, net);
bond_dev->rtnl_link_ops = &bond_link_ops;
res = register_netdevice(bond_dev);
netif_carrier_off(bond_dev);
bond_work_init_all(bond);
rtnl_unlock();
if (res < 0)
free_netdev(bond_dev);
return res;
}
static int __net_init bond_net_init(struct net *net)
{
struct bond_net *bn = net_generic(net, bond_net_id);
bn->net = net;
INIT_LIST_HEAD(&bn->dev_list);
bond_create_proc_dir(bn);
bond_create_sysfs(bn);
return 0;
}
static void __net_exit bond_net_exit(struct net *net)
{
struct bond_net *bn = net_generic(net, bond_net_id);
struct bonding *bond, *tmp_bond;
LIST_HEAD(list);
bond_destroy_sysfs(bn);
/* Kill off any bonds created after unregistering bond rtnl ops */
rtnl_lock();
list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list)
unregister_netdevice_queue(bond->dev, &list);
unregister_netdevice_many(&list);
rtnl_unlock();
bond_destroy_proc_dir(bn);
}
static struct pernet_operations bond_net_ops = {
.init = bond_net_init,
.exit = bond_net_exit,
.id = &bond_net_id,
.size = sizeof(struct bond_net),
};
static int __init bonding_init(void)
{
int i;
int res;
pr_info("%s", bond_version);
res = bond_check_params(&bonding_defaults);
if (res)
goto out;
res = register_pernet_subsys(&bond_net_ops);
if (res)
goto out;
res = bond_netlink_init();
if (res)
goto err_link;
bond_create_debugfs();
for (i = 0; i < max_bonds; i++) {
res = bond_create(&init_net, NULL);
if (res)
goto err;
}
register_netdevice_notifier(&bond_netdev_notifier);
out:
return res;
err:
bond_destroy_debugfs();
bond_netlink_fini();
err_link:
unregister_pernet_subsys(&bond_net_ops);
goto out;
}
static void __exit bonding_exit(void)
{
unregister_netdevice_notifier(&bond_netdev_notifier);
bond_destroy_debugfs();
bond_netlink_fini();
unregister_pernet_subsys(&bond_net_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
/* Make sure we don't have an imbalance on our netpoll blocking */
WARN_ON(atomic_read(&netpoll_block_tx));
#endif
}
module_init(bonding_init);
module_exit(bonding_exit);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");