mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 15:26:21 +09:00
caaf9371ec
[ Upstream commit a1ebdb3741993f853865d1bd8f77881916ad53a7 ]
Also some omap3 devices like n900 seem to have eMMC and micro-sd swapped
around with commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for
drivers that existed in v4.4").
Let's fix the issue with aliases as discussed on the mailing lists. While
the mmc aliases should be board specific, let's first fix the issue with
minimal changes.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
844 lines
18 KiB
Plaintext
844 lines
18 KiB
Plaintext
/*
|
|
* Device Tree Source for OMAP3 SoC
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pinctrl/omap.h>
|
|
|
|
/ {
|
|
compatible = "ti,omap3430", "ti,omap3";
|
|
interrupt-parent = <&intc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
chosen { };
|
|
|
|
aliases {
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
mmc0 = &mmc1;
|
|
mmc1 = &mmc2;
|
|
mmc2 = &mmc3;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a8";
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
|
|
clocks = <&dpll1_ck>;
|
|
clock-names = "cpu";
|
|
|
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
|
};
|
|
};
|
|
|
|
pmu@54000000 {
|
|
compatible = "arm,cortex-a8-pmu";
|
|
reg = <0x54000000 0x800000>;
|
|
interrupts = <3>;
|
|
ti,hwmods = "debugss";
|
|
};
|
|
|
|
/*
|
|
* The soc node represents the soc top level view. It is used for IPs
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
|
*/
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap3-mpu";
|
|
ti,hwmods = "mpu";
|
|
};
|
|
|
|
iva: iva {
|
|
compatible = "ti,iva2.2";
|
|
ti,hwmods = "iva";
|
|
|
|
dsp {
|
|
compatible = "ti,omap3-c64";
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* XXX: Use a flat representation of the OMAP3 interconnect.
|
|
* The real OMAP interconnect network is quite complex.
|
|
* Since it will not bring real advantage to represent that in DT for
|
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
|
* hierarchy.
|
|
*/
|
|
ocp@68000000 {
|
|
compatible = "ti,omap3-l3-smx", "simple-bus";
|
|
reg = <0x68000000 0x10000>;
|
|
interrupts = <9 10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
ti,hwmods = "l3_main";
|
|
|
|
l4_core: l4@48000000 {
|
|
compatible = "ti,omap3-l4-core", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x48000000 0x1000000>;
|
|
|
|
scm: scm@2000 {
|
|
compatible = "ti,omap3-scm", "simple-bus";
|
|
reg = <0x2000 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x2000 0x2000>;
|
|
|
|
omap3_pmx_core: pinmux@30 {
|
|
compatible = "ti,omap3-padconf",
|
|
"pinctrl-single";
|
|
reg = <0x30 0x238>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
|
|
scm_conf: scm_conf@270 {
|
|
compatible = "syscon", "simple-bus";
|
|
reg = <0x270 0x330>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x270 0x330>;
|
|
|
|
pbias_regulator: pbias_regulator@2b0 {
|
|
compatible = "ti,pbias-omap3", "ti,pbias-omap";
|
|
reg = <0x2b0 0x4>;
|
|
syscon = <&scm_conf>;
|
|
pbias_mmc_reg: pbias_mmc_omap2430 {
|
|
regulator-name = "pbias_mmc_omap2430";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
scm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
scm_clockdomains: clockdomains {
|
|
};
|
|
|
|
omap3_pmx_wkup: pinmux@a00 {
|
|
compatible = "ti,omap3-padconf",
|
|
"pinctrl-single";
|
|
reg = <0xa00 0x5c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
};
|
|
};
|
|
|
|
aes: aes@480c5000 {
|
|
compatible = "ti,omap3-aes";
|
|
ti,hwmods = "aes";
|
|
reg = <0x480c5000 0x50>;
|
|
interrupts = <0>;
|
|
dmas = <&sdma 65 &sdma 66>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
prm: prm@48306000 {
|
|
compatible = "ti,omap3-prm";
|
|
reg = <0x48306000 0x4000>;
|
|
interrupts = <11>;
|
|
|
|
prm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
cm: cm@48004000 {
|
|
compatible = "ti,omap3-cm";
|
|
reg = <0x48004000 0x4000>;
|
|
|
|
cm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
cm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
counter32k: counter@48320000 {
|
|
compatible = "ti,omap-counter32k";
|
|
reg = <0x48320000 0x20>;
|
|
ti,hwmods = "counter_32k";
|
|
};
|
|
|
|
intc: interrupt-controller@48200000 {
|
|
compatible = "ti,omap3-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x48200000 0x1000>;
|
|
};
|
|
|
|
sdma: dma-controller@48056000 {
|
|
compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
|
|
reg = <0x48056000 0x1000>;
|
|
interrupts = <12>,
|
|
<13>,
|
|
<14>,
|
|
<15>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <32>;
|
|
dma-requests = <96>;
|
|
ti,hwmods = "dma";
|
|
};
|
|
|
|
gpio1: gpio@48310000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x48310000 0x200>;
|
|
interrupts = <29>;
|
|
ti,hwmods = "gpio1";
|
|
ti,gpio-always-on;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@49050000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49050000 0x200>;
|
|
interrupts = <30>;
|
|
ti,hwmods = "gpio2";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@49052000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49052000 0x200>;
|
|
interrupts = <31>;
|
|
ti,hwmods = "gpio3";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@49054000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49054000 0x200>;
|
|
interrupts = <32>;
|
|
ti,hwmods = "gpio4";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio5: gpio@49056000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49056000 0x200>;
|
|
interrupts = <33>;
|
|
ti,hwmods = "gpio5";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@49058000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49058000 0x200>;
|
|
interrupts = <34>;
|
|
ti,hwmods = "gpio6";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
uart1: serial@4806a000 {
|
|
compatible = "ti,omap3-uart";
|
|
reg = <0x4806a000 0x2000>;
|
|
interrupts-extended = <&intc 72>;
|
|
dmas = <&sdma 49 &sdma 50>;
|
|
dma-names = "tx", "rx";
|
|
ti,hwmods = "uart1";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
uart2: serial@4806c000 {
|
|
compatible = "ti,omap3-uart";
|
|
reg = <0x4806c000 0x400>;
|
|
interrupts-extended = <&intc 73>;
|
|
dmas = <&sdma 51 &sdma 52>;
|
|
dma-names = "tx", "rx";
|
|
ti,hwmods = "uart2";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
uart3: serial@49020000 {
|
|
compatible = "ti,omap3-uart";
|
|
reg = <0x49020000 0x400>;
|
|
interrupts-extended = <&intc 74>;
|
|
dmas = <&sdma 53 &sdma 54>;
|
|
dma-names = "tx", "rx";
|
|
ti,hwmods = "uart3";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
i2c1: i2c@48070000 {
|
|
compatible = "ti,omap3-i2c";
|
|
reg = <0x48070000 0x80>;
|
|
interrupts = <56>;
|
|
dmas = <&sdma 27 &sdma 28>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c1";
|
|
};
|
|
|
|
i2c2: i2c@48072000 {
|
|
compatible = "ti,omap3-i2c";
|
|
reg = <0x48072000 0x80>;
|
|
interrupts = <57>;
|
|
dmas = <&sdma 29 &sdma 30>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c2";
|
|
};
|
|
|
|
i2c3: i2c@48060000 {
|
|
compatible = "ti,omap3-i2c";
|
|
reg = <0x48060000 0x80>;
|
|
interrupts = <61>;
|
|
dmas = <&sdma 25 &sdma 26>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c3";
|
|
};
|
|
|
|
mailbox: mailbox@48094000 {
|
|
compatible = "ti,omap3-mailbox";
|
|
ti,hwmods = "mailbox";
|
|
reg = <0x48094000 0x200>;
|
|
interrupts = <26>;
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <2>;
|
|
ti,mbox-num-fifos = <2>;
|
|
mbox_dsp: dsp {
|
|
ti,mbox-tx = <0 0 0>;
|
|
ti,mbox-rx = <1 0 0>;
|
|
};
|
|
};
|
|
|
|
mcspi1: spi@48098000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x48098000 0x100>;
|
|
interrupts = <65>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi1";
|
|
ti,spi-num-cs = <4>;
|
|
dmas = <&sdma 35>,
|
|
<&sdma 36>,
|
|
<&sdma 37>,
|
|
<&sdma 38>,
|
|
<&sdma 39>,
|
|
<&sdma 40>,
|
|
<&sdma 41>,
|
|
<&sdma 42>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
|
"tx2", "rx2", "tx3", "rx3";
|
|
};
|
|
|
|
mcspi2: spi@4809a000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x4809a000 0x100>;
|
|
interrupts = <66>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi2";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 43>,
|
|
<&sdma 44>,
|
|
<&sdma 45>,
|
|
<&sdma 46>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
};
|
|
|
|
mcspi3: spi@480b8000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x480b8000 0x100>;
|
|
interrupts = <91>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi3";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 15>,
|
|
<&sdma 16>,
|
|
<&sdma 23>,
|
|
<&sdma 24>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
};
|
|
|
|
mcspi4: spi@480ba000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
reg = <0x480ba000 0x100>;
|
|
interrupts = <48>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi4";
|
|
ti,spi-num-cs = <1>;
|
|
dmas = <&sdma 70>, <&sdma 71>;
|
|
dma-names = "tx0", "rx0";
|
|
};
|
|
|
|
hdqw1w: 1w@480b2000 {
|
|
compatible = "ti,omap3-1w";
|
|
reg = <0x480b2000 0x1000>;
|
|
interrupts = <58>;
|
|
ti,hwmods = "hdq1w";
|
|
};
|
|
|
|
mmc1: mmc@4809c000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
reg = <0x4809c000 0x200>;
|
|
interrupts = <83>;
|
|
ti,hwmods = "mmc1";
|
|
ti,dual-volt;
|
|
dmas = <&sdma 61>, <&sdma 62>;
|
|
dma-names = "tx", "rx";
|
|
pbias-supply = <&pbias_mmc_reg>;
|
|
};
|
|
|
|
mmc2: mmc@480b4000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
reg = <0x480b4000 0x200>;
|
|
interrupts = <86>;
|
|
ti,hwmods = "mmc2";
|
|
dmas = <&sdma 47>, <&sdma 48>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mmc3: mmc@480ad000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
reg = <0x480ad000 0x200>;
|
|
interrupts = <94>;
|
|
ti,hwmods = "mmc3";
|
|
dmas = <&sdma 77>, <&sdma 78>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mmu_isp: mmu@480bd400 {
|
|
#iommu-cells = <0>;
|
|
compatible = "ti,omap2-iommu";
|
|
reg = <0x480bd400 0x80>;
|
|
interrupts = <24>;
|
|
ti,hwmods = "mmu_isp";
|
|
ti,#tlb-entries = <8>;
|
|
};
|
|
|
|
mmu_iva: mmu@5d000000 {
|
|
#iommu-cells = <0>;
|
|
compatible = "ti,omap2-iommu";
|
|
reg = <0x5d000000 0x80>;
|
|
interrupts = <28>;
|
|
ti,hwmods = "mmu_iva";
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt2: wdt@48314000 {
|
|
compatible = "ti,omap3-wdt";
|
|
reg = <0x48314000 0x80>;
|
|
ti,hwmods = "wd_timer2";
|
|
};
|
|
|
|
mcbsp1: mcbsp@48074000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x48074000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <16>, /* OCP compliant interrupt */
|
|
<59>, /* TX interrupt */
|
|
<60>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp1";
|
|
dmas = <&sdma 31>,
|
|
<&sdma 32>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp1_fck>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp2: mcbsp@49022000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49022000 0xff>,
|
|
<0x49028000 0xff>;
|
|
reg-names = "mpu", "sidetone";
|
|
interrupts = <17>, /* OCP compliant interrupt */
|
|
<62>, /* TX interrupt */
|
|
<63>, /* RX interrupt */
|
|
<4>; /* Sidetone */
|
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
|
ti,buffer-size = <1280>;
|
|
ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
|
|
dmas = <&sdma 33>,
|
|
<&sdma 34>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
|
|
clock-names = "fck", "ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp3: mcbsp@49024000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49024000 0xff>,
|
|
<0x4902a000 0xff>;
|
|
reg-names = "mpu", "sidetone";
|
|
interrupts = <22>, /* OCP compliant interrupt */
|
|
<89>, /* TX interrupt */
|
|
<90>, /* RX interrupt */
|
|
<5>; /* Sidetone */
|
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
|
|
dmas = <&sdma 17>,
|
|
<&sdma 18>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
|
|
clock-names = "fck", "ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp4: mcbsp@49026000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49026000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <23>, /* OCP compliant interrupt */
|
|
<54>, /* TX interrupt */
|
|
<55>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp4";
|
|
dmas = <&sdma 19>,
|
|
<&sdma 20>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp4_fck>;
|
|
clock-names = "fck";
|
|
#sound-dai-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mcbsp5: mcbsp@48096000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x48096000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <27>, /* OCP compliant interrupt */
|
|
<81>, /* TX interrupt */
|
|
<82>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp5";
|
|
dmas = <&sdma 21>,
|
|
<&sdma 22>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&mcbsp5_fck>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
sham: sham@480c3000 {
|
|
compatible = "ti,omap3-sham";
|
|
ti,hwmods = "sham";
|
|
reg = <0x480c3000 0x64>;
|
|
interrupts = <49>;
|
|
dmas = <&sdma 69>;
|
|
dma-names = "rx";
|
|
};
|
|
|
|
timer1: timer@48318000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48318000 0x400>;
|
|
interrupts = <37>;
|
|
ti,hwmods = "timer1";
|
|
ti,timer-alwon;
|
|
};
|
|
|
|
timer2: timer@49032000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49032000 0x400>;
|
|
interrupts = <38>;
|
|
ti,hwmods = "timer2";
|
|
};
|
|
|
|
timer3: timer@49034000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49034000 0x400>;
|
|
interrupts = <39>;
|
|
ti,hwmods = "timer3";
|
|
};
|
|
|
|
timer4: timer@49036000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49036000 0x400>;
|
|
interrupts = <40>;
|
|
ti,hwmods = "timer4";
|
|
};
|
|
|
|
timer5: timer@49038000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49038000 0x400>;
|
|
interrupts = <41>;
|
|
ti,hwmods = "timer5";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer6: timer@4903a000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903a000 0x400>;
|
|
interrupts = <42>;
|
|
ti,hwmods = "timer6";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer7: timer@4903c000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903c000 0x400>;
|
|
interrupts = <43>;
|
|
ti,hwmods = "timer7";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer8: timer@4903e000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903e000 0x400>;
|
|
interrupts = <44>;
|
|
ti,hwmods = "timer8";
|
|
ti,timer-pwm;
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer9: timer@49040000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49040000 0x400>;
|
|
interrupts = <45>;
|
|
ti,hwmods = "timer9";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer10: timer@48086000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48086000 0x400>;
|
|
interrupts = <46>;
|
|
ti,hwmods = "timer10";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer11: timer@48088000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48088000 0x400>;
|
|
interrupts = <47>;
|
|
ti,hwmods = "timer11";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer12: timer@48304000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48304000 0x400>;
|
|
interrupts = <95>;
|
|
ti,hwmods = "timer12";
|
|
ti,timer-alwon;
|
|
ti,timer-secure;
|
|
};
|
|
|
|
usbhstll: usbhstll@48062000 {
|
|
compatible = "ti,usbhs-tll";
|
|
reg = <0x48062000 0x1000>;
|
|
interrupts = <78>;
|
|
ti,hwmods = "usb_tll_hs";
|
|
};
|
|
|
|
usbhshost: usbhshost@48064000 {
|
|
compatible = "ti,usbhs-host";
|
|
reg = <0x48064000 0x400>;
|
|
ti,hwmods = "usb_host_hs";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbhsohci: ohci@48064400 {
|
|
compatible = "ti,ohci-omap3";
|
|
reg = <0x48064400 0x400>;
|
|
interrupts = <76>;
|
|
remote-wakeup-connected;
|
|
};
|
|
|
|
usbhsehci: ehci@48064800 {
|
|
compatible = "ti,ehci-omap";
|
|
reg = <0x48064800 0x400>;
|
|
interrupts = <77>;
|
|
};
|
|
};
|
|
|
|
gpmc: gpmc@6e000000 {
|
|
compatible = "ti,omap3430-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
reg = <0x6e000000 0x02d0>;
|
|
interrupts = <20>;
|
|
dmas = <&sdma 4>;
|
|
dma-names = "rxtx";
|
|
gpmc,num-cs = <8>;
|
|
gpmc,num-waitpins = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
usb_otg_hs: usb_otg_hs@480ab000 {
|
|
compatible = "ti,omap3-musb";
|
|
reg = <0x480ab000 0x1000>;
|
|
interrupts = <92>, <93>;
|
|
interrupt-names = "mc", "dma";
|
|
ti,hwmods = "usb_otg_hs";
|
|
multipoint = <1>;
|
|
num-eps = <16>;
|
|
ram-bits = <12>;
|
|
};
|
|
|
|
dss: dss@48050000 {
|
|
compatible = "ti,omap3-dss";
|
|
reg = <0x48050000 0x200>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_core";
|
|
clocks = <&dss1_alwon_fck>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dispc@48050400 {
|
|
compatible = "ti,omap3-dispc";
|
|
reg = <0x48050400 0x400>;
|
|
interrupts = <25>;
|
|
ti,hwmods = "dss_dispc";
|
|
clocks = <&dss1_alwon_fck>;
|
|
clock-names = "fck";
|
|
};
|
|
|
|
dsi: encoder@4804fc00 {
|
|
compatible = "ti,omap3-dsi";
|
|
reg = <0x4804fc00 0x200>,
|
|
<0x4804fe00 0x40>,
|
|
<0x4804ff00 0x20>;
|
|
reg-names = "proto", "phy", "pll";
|
|
interrupts = <25>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_dsi1";
|
|
clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
|
|
clock-names = "fck", "sys_clk";
|
|
};
|
|
|
|
rfbi: encoder@48050800 {
|
|
compatible = "ti,omap3-rfbi";
|
|
reg = <0x48050800 0x100>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_rfbi";
|
|
clocks = <&dss1_alwon_fck>, <&dss_ick>;
|
|
clock-names = "fck", "ick";
|
|
};
|
|
|
|
venc: encoder@48050c00 {
|
|
compatible = "ti,omap3-venc";
|
|
reg = <0x48050c00 0x100>;
|
|
status = "disabled";
|
|
ti,hwmods = "dss_venc";
|
|
clocks = <&dss_tv_fck>;
|
|
clock-names = "fck";
|
|
};
|
|
};
|
|
|
|
ssi: ssi-controller@48058000 {
|
|
compatible = "ti,omap3-ssi";
|
|
ti,hwmods = "ssi";
|
|
|
|
status = "disabled";
|
|
|
|
reg = <0x48058000 0x1000>,
|
|
<0x48059000 0x1000>;
|
|
reg-names = "sys",
|
|
"gdd";
|
|
|
|
interrupts = <71>;
|
|
interrupt-names = "gdd_mpu";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
ssi_port1: ssi-port@4805a000 {
|
|
compatible = "ti,omap3-ssi-port";
|
|
|
|
reg = <0x4805a000 0x800>,
|
|
<0x4805a800 0x800>;
|
|
reg-names = "tx",
|
|
"rx";
|
|
|
|
interrupts = <67>,
|
|
<68>;
|
|
};
|
|
|
|
ssi_port2: ssi-port@4805b000 {
|
|
compatible = "ti,omap3-ssi-port";
|
|
|
|
reg = <0x4805b000 0x800>,
|
|
<0x4805b800 0x800>;
|
|
reg-names = "tx",
|
|
"rx";
|
|
|
|
interrupts = <69>,
|
|
<70>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "omap3xxx-clocks.dtsi"
|