mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 15:26:21 +09:00
d788a900f3
[ Upstream commit 6503c568e97a52f8b7a3109718db438e52e59485 ]
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU. Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.
Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.
Fixes: eea6653aae ("ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
565 lines
11 KiB
Plaintext
565 lines
11 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
|
|
* device tree source
|
|
*/
|
|
|
|
#include <dt-bindings/sound/samsung-i2s.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/clock/maxim,max77686.h>
|
|
#include "exynos4412.dtsi"
|
|
#include "exynos4412-ppmu-common.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "exynos-mfc-reserved-memory.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &serial_1;
|
|
};
|
|
|
|
firmware@204f000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x0204F000 0x1000>;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_power_key>;
|
|
|
|
power_key {
|
|
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
label = "power key";
|
|
debounce-interval = <10>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "hardkernel,odroid-xu4-audio";
|
|
|
|
cpu {
|
|
sound-dai = <&i2s0 0>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&hdmi>, <&max98090>;
|
|
};
|
|
};
|
|
|
|
emmc_pwrseq: pwrseq {
|
|
pinctrl-0 = <&emmc_rstn>;
|
|
pinctrl-names = "default";
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
xxti {
|
|
compatible = "samsung,clock-xxti";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
xusbxti {
|
|
compatible = "samsung,clock-xusbxti";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
cooling-maps {
|
|
cooling_map0: map0 {
|
|
/* Corresponds to 800MHz at freq_table */
|
|
cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
|
|
<&cpu2 7 7>, <&cpu3 7 7>;
|
|
};
|
|
cooling_map1: map1 {
|
|
/* Corresponds to 200MHz at freq_table */
|
|
cooling-device = <&cpu0 13 13>,
|
|
<&cpu1 13 13>,
|
|
<&cpu2 13 13>,
|
|
<&cpu3 13 13>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&bus_dmc {
|
|
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
|
|
vdd-supply = <&buck1_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_acp {
|
|
devfreq = <&bus_dmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_c2c {
|
|
devfreq = <&bus_dmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_leftbus {
|
|
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
|
|
vdd-supply = <&buck3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_rightbus {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_display {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_fsys {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_peri {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_mfc {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&camera {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <>;
|
|
};
|
|
|
|
&clock {
|
|
assigned-clocks = <&clock CLK_FOUT_EPLL>;
|
|
assigned-clock-rates = <45158401>;
|
|
};
|
|
|
|
&clock_audss {
|
|
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
|
|
<&clock_audss EXYNOS_MOUT_I2S>,
|
|
<&clock_audss EXYNOS_DOUT_SRP>,
|
|
<&clock_audss EXYNOS_DOUT_AUD_BUS>,
|
|
<&clock_audss EXYNOS_DOUT_I2S>;
|
|
|
|
assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
|
|
<&clock_audss EXYNOS_MOUT_AUDSS>;
|
|
|
|
assigned-clock-rates = <0>, <0>,
|
|
<196608001>,
|
|
<(196608001 / 2)>,
|
|
<(196608001 / 8)>;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
gpio_power_key: power_key {
|
|
samsung,pins = "gpx1-3";
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
};
|
|
|
|
max77686_irq: max77686-irq {
|
|
samsung,pins = "gpx3-2";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
|
};
|
|
|
|
hdmi_hpd: hdmi-hpd {
|
|
samsung,pins = "gpx3-7";
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
|
|
};
|
|
|
|
emmc_rstn: emmc-rstn {
|
|
samsung,pins = "gpk1-2";
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
};
|
|
};
|
|
|
|
&ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&exynos_usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&fimc_0 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
|
|
<&clock CLK_SCLK_FIMC0>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
|
|
&fimc_1 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
|
|
<&clock CLK_SCLK_FIMC1>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
|
|
&fimc_2 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
|
|
<&clock CLK_SCLK_FIMC2>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
|
|
&fimc_3 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
|
|
<&clock CLK_SCLK_FIMC3>;
|
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
|
assigned-clock-rates = <0>, <176000000>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&buck4_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_hpd>;
|
|
vdd-supply = <&ldo8_reg>;
|
|
vdd_osc-supply = <&ldo10_reg>;
|
|
vdd_pll-supply = <&ldo8_reg>;
|
|
ddc = <&i2c_2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmicec {
|
|
status = "okay";
|
|
};
|
|
|
|
&hsotg {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
vusb_d-supply = <&ldo15_reg>;
|
|
vusb_a-supply = <&ldo12_reg>;
|
|
};
|
|
|
|
&i2c_0 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
status = "okay";
|
|
|
|
usb3503: usb3503@8 {
|
|
compatible = "smsc,usb3503";
|
|
reg = <0x08>;
|
|
|
|
intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
|
|
connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
|
|
initial-mode = <1>;
|
|
};
|
|
|
|
max77686: pmic@9 {
|
|
compatible = "maxim,max77686";
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max77686_irq>;
|
|
reg = <0x09>;
|
|
#clock-cells = <1>;
|
|
|
|
voltage-regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_M1_2_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VDDQ_EXT_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDDQ_MMC2_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VDDQ_MMC1_3_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VDD10_MPLL_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VDD10_XPLL_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VDD10_HDMI_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VDDQ_MIPIHSI_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD18_ABB1_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD33_USB_3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDDQ_C2C_W_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDD18_ABB0_2_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDD10_HSIC_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDD18_HSIC_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "LDO20_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "TFLASH_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
/*
|
|
* Only U3 uses it, so let it define the
|
|
* constraints
|
|
*/
|
|
regulator-name = "LDO22";
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "VDDQ_LCD_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-microvolt-offset = <50000>;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "VDDQ_CKEM1_2_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "BUCK6_1.35V";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "BUCK7_2.0V";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
/*
|
|
* Constraints set by specific board: X,
|
|
* X2 and U3.
|
|
*/
|
|
regulator-name = "BUCK8_2.8V";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c_1 {
|
|
status = "okay";
|
|
max98090: max98090@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <0 IRQ_TYPE_NONE>;
|
|
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
|
clock-names = "mclk";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c_8 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s0 {
|
|
pinctrl-0 = <&i2s0_bus>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
|
|
assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
|
|
};
|
|
|
|
&mixer {
|
|
status = "okay";
|
|
};
|
|
|
|
&mshc_0 {
|
|
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&ldo20_reg>;
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
status = "okay";
|
|
|
|
broken-cd;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&sdhci_2 {
|
|
bus-width = <4>;
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&ldo21_reg>;
|
|
vqmmc-supply = <&ldo4_reg>;
|
|
cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tmu {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
status = "okay";
|
|
};
|