linux-brain/arch/arm/boot/dts/exynos4210.dtsi
Marek Szyprowski 47f28b41df ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
The PMU module of Mali400 GPU is optional and it looks that it is not
present on Exynos4210, because any access to its registers causes external
abort. This patch removes "pmu" interrupt for Exynos4210 SoCs, so the
driver will skip the PMU module. This fixes following fault during kernel
boot:

    Unhandled fault: imprecise external abort (0x1406) at 0x00000000
    (lima_pmu_init) from [<c059e6f8>] (lima_device_init+0x244/0x5a0)
    (lima_device_init) from [<c059e40c>] (lima_pdev_probe+0x7c/0xd8)
    (lima_pdev_probe) from [<c05afcb8>] (platform_drv_probe+0x48/0x9c)
    (platform_drv_probe) from [<c05ad594>] (really_probe+0x1c4/0x400)
    (really_probe) from [<c05ad988>] (driver_probe_device+0x78/0x1b8)
    (driver_probe_device) from [<c05add30>] (device_driver_attach+0x58/0x60)
    (device_driver_attach) from [<c05ade34>] (__driver_attach+0xfc/0x160)
    (__driver_attach) from [<c05ab650>] (bus_for_each_dev+0x68/0xb4)
    (bus_for_each_dev) from [<c05ac734>] (bus_add_driver+0x104/0x20c)
    (bus_add_driver) from [<c05aece0>] (driver_register+0x78/0x10c)
    (driver_register) from [<c0103214>] (do_one_initcall+0x8c/0x430)
    (do_one_initcall) from [<c0f01328>] (kernel_init_freeable+0x3c8/0x4d0)
    (kernel_init_freeable) from [<c0ac3aa0>] (kernel_init+0x8/0x10c)
    (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)

The PMU module seems to work fine on Exynos4412 SoCs, so the patch also
moves the interrupt definitions to exynos4210.dtsi and exynos4412.dtsi
respectively, to keep only the common part in exynos4.dtsi.

Fixes: 13efd80aca ("ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-01 20:25:57 +02:00

533 lines
12 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/*
* Samsung's Exynos4210 SoC device tree source
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2010-2011 Linaro Ltd.
* www.linaro.org
*
* Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
* based board files can include this file and provide values for board specific
* bindings.
*
* Note: This file does not include device nodes for all the controllers in
* Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
* nodes can be added to this file.
*/
#include "exynos4.dtsi"
#include "exynos4-cpu-thermal.dtsi"
/ {
compatible = "samsung,exynos4210", "samsung,exynos4";
aliases {
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@900 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x900>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
clock-latency = <160000>;
operating-points = <
1200000 1250000
1000000 1150000
800000 1075000
500000 975000
400000 975000
200000 950000
>;
#cooling-cells = <2>; /* min followed by max */
};
cpu1: cpu@901 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x901>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
clock-latency = <160000>;
operating-points = <
1200000 1250000
1000000 1150000
800000 1075000
500000 975000
400000 975000
200000 950000
>;
#cooling-cells = <2>; /* min followed by max */
};
};
soc: soc {
sysram: sysram@2020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x02020000 0x20000>;
smp-sysram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
smp-sysram@1f000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x1f000 0x1000>;
};
};
pd_lcd1: lcd1-power-domain@10023ca0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
#power-domain-cells = <0>;
label = "LCD1";
};
l2c: l2-cache-controller@10502000 {
compatible = "arm,pl310-cache";
reg = <0x10502000 0x1000>;
cache-unified;
cache-level = <2>;
arm,tag-latency = <2 2 1>;
arm,data-latency = <2 2 1>;
};
mct: mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map =
<0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
<1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
<2 &combiner 12 6>,
<3 &combiner 12 7>,
<4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
<5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
watchdog: watchdog@10060000 {
compatible = "samsung,s3c6410-wdt";
reg = <0x10060000 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
};
clock: clock-controller@10030000 {
compatible = "samsung,exynos4210-clock";
reg = <0x10030000 0x20000>;
#clock-cells = <1>;
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11000000 0x1000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_2: pinctrl@3860000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x03860000 0x1000>;
};
g2d: g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
power-domains = <&pd_lcd0>;
iommus = <&sysmmu_g2d>;
};
ppmu_acp: ppmu_acp@10ae0000 {
compatible = "samsung,exynos-ppmu";
reg = <0x10ae0000 0x2000>;
status = "disabled";
};
ppmu_lcd1: ppmu_lcd1@12240000 {
compatible = "samsung,exynos-ppmu";
reg = <0x12240000 0x2000>;
clocks = <&clock CLK_PPMULCD1>;
clock-names = "ppmu";
status = "disabled";
};
sysmmu_g2d: sysmmu@12a20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12A20000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <4 7>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
power-domains = <&pd_lcd0>;
#iommu-cells = <0>;
};
sysmmu_fimd1: sysmmu@12220000 {
compatible = "samsung,exynos-sysmmu";
interrupt-parent = <&combiner>;
reg = <0x12220000 0x1000>;
interrupts = <5 3>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
power-domains = <&pd_lcd1>;
#iommu-cells = <0>;
};
bus_dmc: bus_dmc {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DIV_DMC>;
clock-names = "bus";
operating-points-v2 = <&bus_dmc_opp_table>;
status = "disabled";
};
bus_acp: bus_acp {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DIV_ACP>;
clock-names = "bus";
operating-points-v2 = <&bus_acp_opp_table>;
status = "disabled";
};
bus_peri: bus_peri {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_ACLK100>;
clock-names = "bus";
operating-points-v2 = <&bus_peri_opp_table>;
status = "disabled";
};
bus_fsys: bus_fsys {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_ACLK133>;
clock-names = "bus";
operating-points-v2 = <&bus_fsys_opp_table>;
status = "disabled";
};
bus_display: bus_display {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_ACLK160>;
clock-names = "bus";
operating-points-v2 = <&bus_display_opp_table>;
status = "disabled";
};
bus_lcd0: bus_lcd0 {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_ACLK200>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_leftbus: bus_leftbus {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DIV_GDL>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_rightbus: bus_rightbus {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DIV_GDR>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_mfc: bus_mfc {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_SCLK_MFC>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_dmc_opp_table: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <1025000>;
};
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1050000>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1150000>;
opp-suspend;
};
};
bus_acp_opp_table: opp_table2 {
compatible = "operating-points-v2";
opp-shared;
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
};
bus_peri_opp_table: opp_table3 {
compatible = "operating-points-v2";
opp-shared;
opp-5000000 {
opp-hz = /bits/ 64 <5000000>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
bus_fsys_opp_table: opp_table4 {
compatible = "operating-points-v2";
opp-shared;
opp-10000000 {
opp-hz = /bits/ 64 <10000000>;
};
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
};
bus_display_opp_table: opp_table5 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
opp-134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
};
bus_leftbus_opp_table: opp_table6 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-suspend;
};
};
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert0: cpu-alert-0 {
temperature = <85000>; /* millicelsius */
};
cpu_alert1: cpu-alert-1 {
temperature = <100000>; /* millicelsius */
};
cpu_alert2: cpu-alert-2 {
temperature = <110000>; /* millicelsius */
};
};
};
};
};
&gic {
cpu-offset = <0x8000>;
};
&camera {
clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
};
&combiner {
samsung,combiner-nr = <16>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
&fimc_0 {
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,cam-if;
};
&fimc_1 {
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,cam-if;
};
&fimc_2 {
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,lcd-wb;
};
&fimc_3 {
samsung,pix-limits = <1920 8192 1366 1920>;
samsung,rotators = <0>;
samsung,mainscaler-ext;
samsung,lcd-wb;
};
&gpu {
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp0",
"ppmmu0",
"pp1",
"ppmmu1",
"pp2",
"ppmmu2",
"pp3",
"ppmmu3";
operating-points-v2 = <&gpu_opp_table>;
gpu_opp_table: opp_table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <950000>;
};
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1050000>;
};
};
};
&mdma1 {
power-domains = <&pd_lcd0>;
};
&mixer {
clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
"sclk_mixer";
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
};
&pmu {
interrupts = <2 2>, <3 2>;
interrupt-affinity = <&cpu0>, <&cpu1>;
status = "okay";
};
&pmu_system_controller {
clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
"clkout4", "clkout8", "clkout9";
clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
#clock-cells = <1>;
};
&rotator {
power-domains = <&pd_lcd0>;
};
&sysmmu_rotator {
power-domains = <&pd_lcd0>;
};
&tmu {
compatible = "samsung,exynos4210-tmu";
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
samsung,tmu_gain = <15>;
samsung,tmu_reference_voltage = <7>;
};
#include "exynos4210-pinctrl.dtsi"