linux-brain/arch/arm/boot/dts/spear3xx.dtsi
Thomas Gleixner fcaf20360a treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159
Based on 1 normalized pattern(s):

  the code contained herein is licensed under the gnu general public
  license you may obtain a copy of the gnu general public license
  version 2 or later at the following locations http www opensource
  org licenses gpl license html http www gnu org copyleft gpl html

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 161 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00

152 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* DTS file for all SPEAr3xx SoCs
*
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*/
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&vic>;
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm926ej-s";
device_type = "cpu";
};
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
vic: interrupt-controller@f1100000 {
compatible = "arm,pl190-vic";
interrupt-controller;
reg = <0xf1100000 0x1000>;
#interrupt-cells = <1>;
};
dma@fc400000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0xfc400000 0x1000>;
interrupt-parent = <&vic>;
interrupts = <8>;
status = "disabled";
};
gmac: eth@e0800000 {
compatible = "st,spear600-gmac";
reg = <0xe0800000 0x8000>;
interrupts = <23 22>;
interrupt-names = "macirq", "eth_wake_irq";
phy-mode = "mii";
status = "disabled";
};
smi: flash@fc000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xfc000000 0x1000>;
interrupts = <9>;
status = "disabled";
};
spi0: spi@d0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xd0100000 0x1000>;
interrupts = <20>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ehci@e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupts = <26>;
status = "disabled";
};
ohci@e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupts = <25>;
status = "disabled";
};
ohci@e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupts = <27>;
status = "disabled";
};
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
gpio0: gpio@fc980000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xfc980000 0x1000>;
interrupts = <11>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
i2c0: i2c@d0180000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xd0180000 0x1000>;
interrupts = <21>;
status = "disabled";
};
rtc@fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
interrupts = <10>;
status = "disabled";
};
serial@d0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0000000 0x1000>;
interrupts = <19>;
status = "disabled";
};
wdt@fc880000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0xfc880000 0x1000>;
interrupts = <12>;
status = "disabled";
};
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
interrupts = <2>;
};
};
};
};