linux-brain/arch/riscv/mm/fault.c
Linus Torvalds 5ad18b2e60 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...
2019-07-08 21:48:15 -07:00

281 lines
6.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
* Lennox Wu <lennox.wu@sunplusct.com>
* Chen Liqin <liqin.chen@sunplusct.com>
* Copyright (C) 2012 Regents of the University of California
*/
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/perf_event.h>
#include <linux/signal.h>
#include <linux/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/ptrace.h>
#include <asm/tlbflush.h>
/*
* This routine handles page faults. It determines the address and the
* problem, and then passes it off to one of the appropriate routines.
*/
asmlinkage void do_page_fault(struct pt_regs *regs)
{
struct task_struct *tsk;
struct vm_area_struct *vma;
struct mm_struct *mm;
unsigned long addr, cause;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
int code = SEGV_MAPERR;
vm_fault_t fault;
cause = regs->scause;
addr = regs->sbadaddr;
tsk = current;
mm = tsk->mm;
/*
* Fault-in kernel-space virtual memory on-demand.
* The 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*/
if (unlikely((addr >= VMALLOC_START) && (addr <= VMALLOC_END)))
goto vmalloc_fault;
/* Enable interrupts if they were enabled in the parent context. */
if (likely(regs->sstatus & SR_SPIE))
local_irq_enable();
/*
* If we're in an interrupt, have no user context, or are running
* in an atomic region, then we must not take the fault.
*/
if (unlikely(faulthandler_disabled() || !mm))
goto no_context;
if (user_mode(regs))
flags |= FAULT_FLAG_USER;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, addr);
if (unlikely(!vma))
goto bad_area;
if (likely(vma->vm_start <= addr))
goto good_area;
if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
goto bad_area;
if (unlikely(expand_stack(vma, addr)))
goto bad_area;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it.
*/
good_area:
code = SEGV_ACCERR;
switch (cause) {
case EXC_INST_PAGE_FAULT:
if (!(vma->vm_flags & VM_EXEC))
goto bad_area;
break;
case EXC_LOAD_PAGE_FAULT:
if (!(vma->vm_flags & VM_READ))
goto bad_area;
break;
case EXC_STORE_PAGE_FAULT:
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
flags |= FAULT_FLAG_WRITE;
break;
default:
panic("%s: unhandled cause %lu", __func__, cause);
}
/*
* If for any reason at all we could not handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(vma, addr, flags);
/*
* If we need to retry but a fatal signal is pending, handle the
* signal first. We do not need to release the mmap_sem because it
* would already be released in __lock_page_or_retry in mm/filemap.c.
*/
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(tsk))
return;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
else if (fault & VM_FAULT_SIGBUS)
goto do_sigbus;
BUG();
}
/*
* Major/minor page fault accounting is only done on the
* initial attempt. If we go through a retry, it is extremely
* likely that the page will be found in page cache at that point.
*/
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
1, regs, addr);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
1, regs, addr);
}
if (fault & VM_FAULT_RETRY) {
/*
* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
* of starvation.
*/
flags &= ~(FAULT_FLAG_ALLOW_RETRY);
flags |= FAULT_FLAG_TRIED;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
return;
/*
* Something tried to access memory that isn't in our memory map.
* Fix it, but check if it's kernel or user first.
*/
bad_area:
up_read(&mm->mmap_sem);
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
do_trap(regs, SIGSEGV, code, addr);
return;
}
no_context:
/* Are we prepared to handle this kernel fault? */
if (fixup_exception(regs))
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
bust_spinlocks(1);
pr_alert("Unable to handle kernel %s at virtual address " REG_FMT "\n",
(addr < PAGE_SIZE) ? "NULL pointer dereference" :
"paging request", addr);
die(regs, "Oops");
do_exit(SIGKILL);
/*
* We ran out of memory, call the OOM killer, and return the userspace
* (which will retry the fault, or kill us if we got oom-killed).
*/
out_of_memory:
up_read(&mm->mmap_sem);
if (!user_mode(regs))
goto no_context;
pagefault_out_of_memory();
return;
do_sigbus:
up_read(&mm->mmap_sem);
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
goto no_context;
do_trap(regs, SIGBUS, BUS_ADRERR, addr);
return;
vmalloc_fault:
{
pgd_t *pgd, *pgd_k;
pud_t *pud, *pud_k;
p4d_t *p4d, *p4d_k;
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
int index;
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs))
return do_trap(regs, SIGSEGV, code, addr);
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*
* Do _not_ use "tsk->active_mm->pgd" here.
* We might be inside an interrupt in the middle
* of a task switch.
*/
index = pgd_index(addr);
pgd = (pgd_t *)pfn_to_virt(csr_read(CSR_SATP)) + index;
pgd_k = init_mm.pgd + index;
if (!pgd_present(*pgd_k))
goto no_context;
set_pgd(pgd, *pgd_k);
p4d = p4d_offset(pgd, addr);
p4d_k = p4d_offset(pgd_k, addr);
if (!p4d_present(*p4d_k))
goto no_context;
pud = pud_offset(p4d, addr);
pud_k = pud_offset(p4d_k, addr);
if (!pud_present(*pud_k))
goto no_context;
/*
* Since the vmalloc area is global, it is unnecessary
* to copy individual PTEs
*/
pmd = pmd_offset(pud, addr);
pmd_k = pmd_offset(pud_k, addr);
if (!pmd_present(*pmd_k))
goto no_context;
set_pmd(pmd, *pmd_k);
/*
* Make sure the actual PTE exists as well to
* catch kernel vmalloc-area accesses to non-mapped
* addresses. If we don't do this, this will just
* silently loop forever.
*/
pte_k = pte_offset_kernel(pmd_k, addr);
if (!pte_present(*pte_k))
goto no_context;
/*
* The kernel assumes that TLBs don't cache invalid
* entries, but in RISC-V, SFENCE.VMA specifies an
* ordering constraint, not a cache flush; it is
* necessary even after writing invalid entries.
*/
local_flush_tlb_page(addr);
return;
}
}