linux-brain/arch/c6x/kernel/signal.c
Linus Torvalds 5ad18b2e60 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...
2019-07-08 21:48:15 -07:00

324 lines
7.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Port on Texas Instruments TMS320C6x architecture
*
* Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated
* Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
*
* Updated for 2.6.34: Mark Salter <msalter@redhat.com>
*/
#include <linux/kernel.h>
#include <linux/uaccess.h>
#include <linux/syscalls.h>
#include <linux/tracehook.h>
#include <asm/ucontext.h>
#include <asm/cacheflush.h>
/*
* Do a signal return, undo the signal stack.
*/
#define RETCODE_SIZE (9 << 2) /* 9 instructions = 36 bytes */
struct rt_sigframe {
struct siginfo __user *pinfo;
void __user *puc;
struct siginfo info;
struct ucontext uc;
unsigned long retcode[RETCODE_SIZE >> 2];
};
static int restore_sigcontext(struct pt_regs *regs,
struct sigcontext __user *sc)
{
int err = 0;
/* The access_ok check was done by caller, so use __get_user here */
#define COPY(x) (err |= __get_user(regs->x, &sc->sc_##x))
COPY(sp); COPY(a4); COPY(b4); COPY(a6); COPY(b6); COPY(a8); COPY(b8);
COPY(a0); COPY(a1); COPY(a2); COPY(a3); COPY(a5); COPY(a7); COPY(a9);
COPY(b0); COPY(b1); COPY(b2); COPY(b3); COPY(b5); COPY(b7); COPY(b9);
COPY(a16); COPY(a17); COPY(a18); COPY(a19);
COPY(a20); COPY(a21); COPY(a22); COPY(a23);
COPY(a24); COPY(a25); COPY(a26); COPY(a27);
COPY(a28); COPY(a29); COPY(a30); COPY(a31);
COPY(b16); COPY(b17); COPY(b18); COPY(b19);
COPY(b20); COPY(b21); COPY(b22); COPY(b23);
COPY(b24); COPY(b25); COPY(b26); COPY(b27);
COPY(b28); COPY(b29); COPY(b30); COPY(b31);
COPY(csr); COPY(pc);
#undef COPY
return err;
}
asmlinkage int do_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
sigset_t set;
/* Always make any pending restarted system calls return -EINTR */
current->restart_block.fn = do_no_restart_syscall;
/*
* Since we stacked the signal on a dword boundary,
* 'sp' should be dword aligned here. If it's
* not, then the user is trying to mess with us.
*/
if (regs->sp & 7)
goto badframe;
frame = (struct rt_sigframe __user *) ((unsigned long) regs->sp + 8);
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
set_current_blocked(&set);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
return regs->a4;
badframe:
force_sig(SIGSEGV);
return 0;
}
static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
unsigned long mask)
{
int err = 0;
err |= __put_user(mask, &sc->sc_mask);
/* The access_ok check was done by caller, so use __put_user here */
#define COPY(x) (err |= __put_user(regs->x, &sc->sc_##x))
COPY(sp); COPY(a4); COPY(b4); COPY(a6); COPY(b6); COPY(a8); COPY(b8);
COPY(a0); COPY(a1); COPY(a2); COPY(a3); COPY(a5); COPY(a7); COPY(a9);
COPY(b0); COPY(b1); COPY(b2); COPY(b3); COPY(b5); COPY(b7); COPY(b9);
COPY(a16); COPY(a17); COPY(a18); COPY(a19);
COPY(a20); COPY(a21); COPY(a22); COPY(a23);
COPY(a24); COPY(a25); COPY(a26); COPY(a27);
COPY(a28); COPY(a29); COPY(a30); COPY(a31);
COPY(b16); COPY(b17); COPY(b18); COPY(b19);
COPY(b20); COPY(b21); COPY(b22); COPY(b23);
COPY(b24); COPY(b25); COPY(b26); COPY(b27);
COPY(b28); COPY(b29); COPY(b30); COPY(b31);
COPY(csr); COPY(pc);
#undef COPY
return err;
}
static inline void __user *get_sigframe(struct ksignal *ksig,
struct pt_regs *regs,
unsigned long framesize)
{
unsigned long sp = sigsp(regs->sp, ksig);
/*
* No matter what happens, 'sp' must be dword
* aligned. Otherwise, nasty things will happen
*/
return (void __user *)((sp - framesize) & ~7);
}
static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long __user *retcode;
int err = 0;
frame = get_sigframe(ksig, regs, sizeof(*frame));
if (!access_ok(frame, sizeof(*frame)))
return -EFAULT;
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, &ksig->info);
/* Clear all the bits of the ucontext we don't use. */
err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace */
retcode = (unsigned long __user *) &frame->retcode;
/* The access_ok check was done above, so use __put_user here */
#define COPY(x) (err |= __put_user(x, retcode++))
COPY(0x0000002AUL | (__NR_rt_sigreturn << 7));
/* MVK __NR_rt_sigreturn,B0 */
COPY(0x10000000UL); /* SWE */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
COPY(0x00006000UL); /* NOP 4 */
#undef COPY
if (err)
return -EFAULT;
flush_icache_range((unsigned long) &frame->retcode,
(unsigned long) &frame->retcode + RETCODE_SIZE);
retcode = (unsigned long __user *) &frame->retcode;
/* Change user context to branch to signal handler */
regs->sp = (unsigned long) frame - 8;
regs->b3 = (unsigned long) retcode;
regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
/* Give the signal number to the handler */
regs->a4 = ksig->sig;
/*
* For realtime signals we must also set the second and third
* arguments for the signal handler.
* -- Peter Maydell <pmaydell@chiark.greenend.org.uk> 2000-12-06
*/
regs->b4 = (unsigned long)&frame->info;
regs->a6 = (unsigned long)&frame->uc;
return 0;
}
static inline void
handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
{
switch (regs->a4) {
case -ERESTARTNOHAND:
if (!has_handler)
goto do_restart;
regs->a4 = -EINTR;
break;
case -ERESTARTSYS:
if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
regs->a4 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
do_restart:
regs->a4 = regs->orig_a4;
regs->pc -= 4;
break;
}
}
/*
* handle the actual delivery of a signal to userspace
*/
static void handle_signal(struct ksignal *ksig, struct pt_regs *regs,
int syscall)
{
int ret;
/* Are we from a system call? */
if (syscall) {
/* If so, check system call restarting.. */
switch (regs->a4) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->a4 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
regs->a4 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->a4 = regs->orig_a4;
regs->pc -= 4;
}
}
/* Set up the stack frame */
ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
signal_setup_done(ret, ksig, 0);
}
/*
* handle a potential signal
*/
static void do_signal(struct pt_regs *regs, int syscall)
{
struct ksignal ksig;
/* we want the common case to go fast, which is why we may in certain
* cases get here from kernel mode */
if (!user_mode(regs))
return;
if (get_signal(&ksig)) {
handle_signal(&ksig, regs, syscall);
return;
}
/* did we come from a system call? */
if (syscall) {
/* restart the system call - no handlers present */
switch (regs->a4) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->a4 = regs->orig_a4;
regs->pc -= 4;
break;
case -ERESTART_RESTARTBLOCK:
regs->a4 = regs->orig_a4;
regs->b0 = __NR_restart_syscall;
regs->pc -= 4;
break;
}
}
/* if there's no signal to deliver, we just put the saved sigmask
* back */
restore_saved_sigmask();
}
/*
* notification of userspace execution resumption
* - triggered by current->work.notify_resume
*/
asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags,
int syscall)
{
/* deal with pending signal delivery */
if (thread_info_flags & (1 << TIF_SIGPENDING))
do_signal(regs, syscall);
if (thread_info_flags & (1 << TIF_NOTIFY_RESUME)) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
}