linux-brain/arch/arc/mm/fault.c
Linus Torvalds 5ad18b2e60 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...
2019-07-08 21:48:15 -07:00

236 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/* Page Fault Handling for ARC (TLB Miss / ProtV)
*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*/
#include <linux/signal.h>
#include <linux/interrupt.h>
#include <linux/sched/signal.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <linux/perf_event.h>
#include <linux/mm_types.h>
#include <asm/pgalloc.h>
#include <asm/mmu.h>
/*
* kernel virtual address is required to implement vmalloc/pkmap/fixmap
* Refer to asm/processor.h for System Memory Map
*
* It simply copies the PMD entry (pointer to 2nd level page table or hugepage)
* from swapper pgdir to task pgdir. The 2nd level table/page is thus shared
*/
noinline static int handle_kernel_vaddr_fault(unsigned long address)
{
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*/
pgd_t *pgd, *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pgd = pgd_offset_fast(current->active_mm, address);
pgd_k = pgd_offset_k(address);
if (!pgd_present(*pgd_k))
goto bad_area;
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
goto bad_area;
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
goto bad_area;
set_pmd(pmd, *pmd_k);
/* XXX: create the TLB entry here */
return 0;
bad_area:
return 1;
}
void do_page_fault(unsigned long address, struct pt_regs *regs)
{
struct vm_area_struct *vma = NULL;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
int si_code = SEGV_MAPERR;
int ret;
vm_fault_t fault;
int write = regs->ecr_cause & ECR_C_PROTV_STORE; /* ST/EX */
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*/
if (address >= VMALLOC_START && !user_mode(regs)) {
ret = handle_kernel_vaddr_fault(address);
if (unlikely(ret))
goto no_context;
else
return;
}
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
if (faulthandler_disabled() || !mm)
goto no_context;
if (user_mode(regs))
flags |= FAULT_FLAG_USER;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
goto bad_area;
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (expand_stack(vma, address))
goto bad_area;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
si_code = SEGV_ACCERR;
/* Handle protection violation, execute on heap or stack */
if ((regs->ecr_vec == ECR_V_PROTV) &&
(regs->ecr_cause == ECR_C_PROTV_INST_FETCH))
goto bad_area;
if (write) {
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
flags |= FAULT_FLAG_WRITE;
} else {
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
goto bad_area;
}
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(vma, address, flags);
if (fatal_signal_pending(current)) {
/*
* if fault retry, mmap_sem already relinquished by core mm
* so OK to return to user mode (with signal handled first)
*/
if (fault & VM_FAULT_RETRY) {
if (!user_mode(regs))
goto no_context;
return;
}
}
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (likely(!(fault & VM_FAULT_ERROR))) {
if (flags & FAULT_FLAG_ALLOW_RETRY) {
/* To avoid updating stats twice for retry case */
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
goto retry;
}
}
/* Fault Handled Gracefully */
up_read(&mm->mmap_sem);
return;
}
if (fault & VM_FAULT_OOM)
goto out_of_memory;
else if (fault & VM_FAULT_SIGSEGV)
goto bad_area;
else if (fault & VM_FAULT_SIGBUS)
goto do_sigbus;
/* no man's land */
BUG();
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
bad_area:
up_read(&mm->mmap_sem);
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
tsk->thread.fault_address = address;
force_sig_fault(SIGSEGV, si_code, (void __user *)address);
return;
}
no_context:
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
* when it accesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
*/
if (fixup_exception(regs))
return;
die("Oops", regs, address);
out_of_memory:
up_read(&mm->mmap_sem);
if (user_mode(regs)) {
pagefault_out_of_memory();
return;
}
goto no_context;
do_sigbus:
up_read(&mm->mmap_sem);
if (!user_mode(regs))
goto no_context;
tsk->thread.fault_address = address;
force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
}