mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 23:36:23 +09:00
84ef7c4988
EASRC (Enhanced ASRC) is a new IP module found on i.MX8 MN. It is different from old ASRC module. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
54 lines
1.8 KiB
Plaintext
54 lines
1.8 KiB
Plaintext
Freescale Asynchronous Sample Rate Converter (ASRC) Controller
|
|
|
|
The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
|
|
signal associated with an input clock into a signal associated with a different
|
|
output clock. The driver currently works as a Front End of DPCM with other Back
|
|
Ends Audio controller such as ESAI, SSI and SAI. It has four context to support
|
|
four substreams within totally 32 channels.
|
|
|
|
Required properties:
|
|
|
|
- compatible : Contains "fsl,imx8mn-easrc".
|
|
|
|
- reg : Offset and length of the register set for the device.
|
|
|
|
- interrupts : Contains the asrc interrupt.
|
|
|
|
- dmas : Generic dma devicetree binding as described in
|
|
Documentation/devicetree/bindings/dma/dma.txt.
|
|
|
|
- dma-names : Contains "ctx0_rx", "ctx0_tx", "ctx1_rx", "ctx1_tx",
|
|
"ctx2_rx", "ctx2_tx", "ctx3_rx", "ctx3_tx".
|
|
|
|
- clocks : Contains an entry for each entry in clock-names.
|
|
|
|
- clock-names : Contains the following entries
|
|
"mem" Peripheral clock to driver module.
|
|
|
|
- fsl,easrc-ram-script-name : The coefficient table for the filters
|
|
- fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends.
|
|
|
|
- fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
|
|
|
|
Example:
|
|
|
|
easrc: easrc@300C0000 {
|
|
compatible = "fsl,imx8mn-easrc";
|
|
reg = <0x0 0x300C0000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
|
|
clock-names = "mem";
|
|
dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
|
|
<&sdma2 18 23 0> , <&sdma2 19 23 0>,
|
|
<&sdma2 20 23 0> , <&sdma2 21 23 0>,
|
|
<&sdma2 22 23 0> , <&sdma2 23 23 0>;
|
|
dma-names = "ctx0_rx", "ctx0_tx",
|
|
"ctx1_rx", "ctx1_tx",
|
|
"ctx2_rx", "ctx2_tx",
|
|
"ctx3_rx", "ctx3_tx";
|
|
fsl,easrc-ram-script-name = "imx/easrc/easrc-imx8mn.bin";
|
|
fsl,asrc-rate = <8000>;
|
|
fsl,asrc-width = <16>;
|
|
status = "disabled";
|
|
};
|