linux-brain/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
Rob Herring 4da722ca19 dt-bindings: Remove "status" from examples
Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-05 10:03:06 -05:00

27 lines
748 B
Plaintext

Device Tree bindings for the Armada 370 DB audio
================================================
These Device Tree bindings are used to describe the audio complex
found on the Armada 370 DB platform.
Mandatory properties:
* compatible: must be "marvell,a370db-audio"
* marvell,audio-controller: a phandle that points to the audio
controller of the Armada 370 SoC.
* marvell,audio-codec: a set of three phandles that points to:
1/ the analog audio codec connected to the Armada 370 SoC
2/ the S/PDIF transceiver
3/ the S/PDIF receiver
Example:
sound {
compatible = "marvell,a370db-audio";
marvell,audio-controller = <&audio_controller>;
marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
};