mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 23:36:23 +09:00
5a3ab2815c
Changes to the DT binding document to separate the BCM7425 and the BCM7445. A compatible string "brcm,bcm7425-sdhci" was representing the BCM7425 SDHCI host controller with all BRCMSTB SoCs including the BCM7445. Now it should be separated because vary a bit in initialize each host controller. - Renames the DT binding document to common name. - Adds a compatible string "brcm,bcm7445-sdhci" that is representing the BCM7445 with thereafter 28nm generation ARM based SoCs. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
39 lines
937 B
Plaintext
39 lines
937 B
Plaintext
* BROADCOM BRCMSTB/BMIPS SDHCI Controller
|
|
|
|
This file documents differences between the core properties in mmc.txt
|
|
and the properties used by the sdhci-brcmstb driver.
|
|
|
|
NOTE: The driver disables all UHS speed modes by default and depends
|
|
on Device Tree properties to enable them for SoC/Board combinations
|
|
that support them.
|
|
|
|
Required properties:
|
|
- compatible: should be one of the following
|
|
- "brcm,bcm7425-sdhci"
|
|
- "brcm,bcm7445-sdhci"
|
|
|
|
Refer to clocks/clock-bindings.txt for generic clock consumer properties.
|
|
|
|
Example:
|
|
|
|
sdhci@f03e0100 {
|
|
compatible = "brcm,bcm7425-sdhci";
|
|
reg = <0xf03e0000 0x100>;
|
|
interrupts = <0x0 0x26 0x0>;
|
|
sdhci,auto-cmd12;
|
|
clocks = <&sw_sdio>;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-ddr50;
|
|
};
|
|
|
|
sdhci@f03e0300 {
|
|
non-removable;
|
|
bus-width = <0x8>;
|
|
compatible = "brcm,bcm7425-sdhci";
|
|
reg = <0xf03e0200 0x100>;
|
|
interrupts = <0x0 0x27 0x0>;
|
|
sdhci,auto-cmd12;
|
|
clocks = <sw_sdio>;
|
|
mmc-hs200-1_8v;
|
|
};
|