[ Upstream commit 50791f5d7b6a14b388f46c8885f71d1b98216d1d ]
Channel 1 has polarity bits for vsync and hsync signals but driver never
sets them. It turns out that with pre-HDMI2 controllers seemingly there
is no issue if polarity is not set. However, with HDMI2 controllers
(H6) there often comes to de-synchronization due to phase shift. This
causes flickering screen. It's safe to assume that similar issues might
happen also with pre-HDMI2 controllers.
Solve issue with setting vsync and hsync polarity. Note that display
stacks with tcon top have polarity bits actually in tcon0 polarity
register.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07b5b12d97dc9f47ff3dff46c4f944a15bd762e5 ]
If sun8i_r40_tcon_tv_set_mux() succeed, sun8i_r40_tcon_tv_set_mux()
doesn't have a corresponding put_device(). Thus add put_device()
to fix the exception handling for this function implementation.
Fixes: 0305189afb ("drm/sun4i: tcon: Add support for R40 TCON")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826010826.1785487-1-yukuai3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd0ecabdc953397ed0378022b3b90e0c0871c2eb ]
Timing controllers on A20 are not equivalent: tcon0 on A20 supports
LVDS output and tcon1 does not. Separate the capabilities by
introducing independent set of quirks for each of the tcons.
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200219180858.4806-3-andrey.lebedev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4396393fb96449c56423fb4b351f76e45a6bcaf6 upstream.
In commit 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.
However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.
Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.
This fixes the scrolling artifacts seen on my A13 tablet.
Fixes: 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The datasheet of V3s (and various other chips) wrote
that TCON0_DCLK_DIV can be >= 1 if only dclk is used,
and must >= 6 if dclk1 or dclk2 is used. As currently
neither dclk1 nor dclk2 is used (no writes to these
bits), let's set minimal division to 1.
If this minimal division is 6, some common dot clock
frequencies can't be produced (e.g. 30MHz will not be
possible and will fallback to 25MHz), which is
obviously not an expected behaviour.
Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
-----BEGIN PGP SIGNATURE-----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=5CRH
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main pull request for 5.4-rc1 merge window. I don't think
there is anything outstanding so next week should just be fixes, but
we'll see if I missed anything. I landed some fixes earlier in the
week but got delayed writing summary and sending it out, due to a mix
of sick kid and jetlag!
There are some fixes pending, but I'd rather get the main merge out of
the way instead of delaying it longer.
It's also pretty large in commit count and new amd header file size.
The largest thing is four new amdgpu products (navi12/14, arcturus and
renoir APU support).
Otherwise it's pretty much lots of work across the board, i915 has
started landing tigerlake support, lots of icelake fixes and lots of
locking reworking for future gpu support, lots of header file rework
(drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been
put into the places they are needed.
uapi:
- content protection type property for HDCP
core:
- rework include dependencies
- lots of drmP.h removals
- link rate calculation robustness fix
- make fb helper map only when required
- add connector->DDC adapter link
- DRM_WAIT_ON removed
- drop DRM_AUTH usage from drivers
dma-buf:
- reservation object fence helper
dma-fence:
- shrink dma_fence struct
- merge signal functions
- store timestamps in dma_fence
- selftests
ttm:
- embed drm_get_object struct into ttm_buffer_object
- release_notify callback
bridges:
- sii902x - audio graph card support
- tc358767 - aux data handling rework
- ti-snd64dsi86 - debugfs support, DSI mode flags support
panels:
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe
Himax8279d, Sharp LD-D5116Z01B
- TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01,
Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1
i915:
- Initial tigerlake platform support
- Locking simplification work, general all over refactoring.
- Selftests
- HDCP debug info improvements
- DSI properties
- Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI
suspend/resume
- GuC fixes
- Perf fixes
- ElkhartLake enablement
- DP MST fixes
- GVT - command parser enhancements
amdgpu:
- add wipe memory on release flag for buffer creation
- Navi12/14 support (may be marked experimental)
- Arcturus support
- Renoir APU support
- mclk DPM for Navi
- DC display fixes
- Raven scatter/gather support
- RAS support for GFX
- Navi12 + Arcturus power features
- GPU reset for Picasso
- smu11 i2c controller support
amdkfd:
- navi12/14 support
- Arcturus support
radeon:
- kexec fix
nouveau:
- improved display color management
- detect lack of GPU power cables
vmwgfx:
- evicition priority support
- remove unused security feature
msm:
- msm8998 display support
- better async commit support for cursor updates
etnaviv:
- per-process address space support
- performance counter fixes
- softpin support
mcde:
- DCS transfers fix
exynos:
- drmP.h cleanup
lima:
- reduce logging
kirin:
- misc clenaups
komeda:
- dual-link support
- DT memory regions
hisilicon:
- misc fixes
imx:
- IPUv3 image converter fixes
- 32-bit RGB V4L2 pixel format support
ingenic:
- more support for panel related cases
mgag200:
- cursor support fix
panfrost:
- export GPU features register to userspace
- gpu heap allocations
- per-fd address space support
pl111:
- CLD pads wiring support removed from DT
rockchip:
- rework to use DRM PSR helpers
- fix bug in VOP_WIN_GET macro
- DSI DT binding rework
sun4i:
- improve support for color encoding and range
- DDC enabled GPIO
tinydrm:
- rework SPI support
- improve MIPI-DBI support
- moved to drm/tiny
vkms:
- rework CRC tracking
dw-hdmi:
- get_eld and i2s improvements
gm12u320:
- misc fixes
meson:
- global code cleanup
- vpu feature detect
omap:
- alpha/pixel blend mode properties
rcar-du:
- misc fixes"
* tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits)
drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init
drm/nouveau: Fix ordering between TTM and GEM release
drm/nouveau/prime: Extend DMA reservation object lock
drm/nouveau: Fix fallout from reservation object rework
drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors
drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
drm/i915: to make vgpu ppgtt notificaiton as atomic operation
drm/i915: Flush the existing fence before GGTT read/write
drm/i915: Hold irq-off for the entire fake lock period
drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
drm/i915/gvt: update vgpu workload head pointer correctly
drm/mcde: Fix DSI transfers
drm/msm: Use the correct dma_sync calls harder
drm/msm: remove unlikely() from WARN_ON() conditions
drm/msm/dsi: Fix return value check for clk_get_parent
drm/msm: add atomic traces
drm/msm/dpu: async commit support
drm/msm: async commit support
drm/msm: split power control from prepare/complete_commit
drm/msm: add kms->flush_commit()
...
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: sunxi_defconfig arm):
drivers/gpu/drm/sun4i/sun4i_tcon.c: In function ‘sun4i_tcon0_mode_set_dithering’:
drivers/gpu/drm/sun4i/sun4i_tcon.c:318:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
val |= SUN4I_TCON0_FRM_CTL_MODE_B;
drivers/gpu/drm/sun4i/sun4i_tcon.c:319:2: note: here
case MEDIA_BUS_FMT_RGB666_1X18:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Drop use of the deprecated drmP.h header file.
While touching the list of include file, use the typical order of the
blocks:
\#include <linux/*>
\#include <video/*>
\#include <drm/*>
\#include ""
Within each block, sort the files.
Include necessary files to fix build after the drmP.h removal.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-6-sam@ravnborg.org
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix sparse warnings:
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com
UAPI Changes:
- Add Colorspace connector property (Uma)
- fourcc: Several new YUV formats from ARM (Brian & Ayan)
- fourcc: Fix merge conflicts between new formats above and Swati's that
went in via topic/hdr-formats-2019-03-07 branch (Maarten)
Cross-subsystem Changes:
- Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel)
Core Changes:
- Improve component helper documentation (Daniel)
- Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf)
- Add device managed (devm) drm_device init function (Noralf)
- Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf)
- Move MIPI/DSI rate control params computation into core from i915 (David)
- Add support for shmem backed gem objects (Noralf)
Driver Changes:
- various: Use of_node_name_eq for node name comparisons (Rob Herring)
- sun4i: Add DSI burst mode support (Konstantin)
- panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin)
- virtio: A few prime improvements (Gerd)
- tinydrm: Remove tinydrm_device (Noralf)
- vc4: Add load tracker to driver to detect underflow in atomic check (Boris)
- vboxvideo: Move it out of staging \o/ (Hans)
- v3d: Add support for V3D v4.2 (Eric)
Cc: Konstantin Sudakov <k.sudakov@integrasources.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlyTxEYACgkQlvcN/ahK
Bwpfhgf9HTwlxHKPwRL70o5Ilp7JVjeLjM5IgDgz+o7F+UZn2OdWocmSDAbJ+lwe
V+LXImc5tykGNRzgn4lXljGv3jqxOgVOxEBo53hVjXeYE/jIdbGDF1cx+1tSke67
lbO61dD9RM5GG9eLuzZ9S72qv5mfBYKHJZuULqOei/Ohnubkg0kDQ3zQEFDah1mh
kqHJkd+x1PwcwBnAjbWdIaCMiwrVmxj7yXLQS8bJzSFKc0/r7HlG8qNWmiBllH0D
aRMO2phHkXCVZY+GWWCEOZwz7ve23sibYm9tzBS69nbWJL12CAomB/8LrRPM2K5v
tVBNrX0eNHMKtOa0En0oF37BXUXizQ==
=DVKQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-03-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.2:
UAPI Changes:
- Add Colorspace connector property (Uma)
- fourcc: Several new YUV formats from ARM (Brian & Ayan)
- fourcc: Fix merge conflicts between new formats above and Swati's that
went in via topic/hdr-formats-2019-03-07 branch (Maarten)
Cross-subsystem Changes:
- Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel)
Core Changes:
- Improve component helper documentation (Daniel)
- Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf)
- Add device managed (devm) drm_device init function (Noralf)
- Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf)
- Move MIPI/DSI rate control params computation into core from i915 (David)
- Add support for shmem backed gem objects (Noralf)
Driver Changes:
- various: Use of_node_name_eq for node name comparisons (Rob Herring)
- sun4i: Add DSI burst mode support (Konstantin)
- panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin)
- virtio: A few prime improvements (Gerd)
- tinydrm: Remove tinydrm_device (Noralf)
- vc4: Add load tracker to driver to detect underflow in atomic check (Boris)
- vboxvideo: Move it out of staging \o/ (Hans)
- v3d: Add support for V3D v4.2 (Eric)
Cc: Konstantin Sudakov <k.sudakov@integrasources.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the
new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and
new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them
through the code.
This effectively changes the value of the .sampling_edge bridge timings
field in the dumb-vga-dac driver. This is safe to do as no driver
consumes these values yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The current code allows the TCON clock divider to have a range between 4
and 127 when feeding the DSI controller.
The only display supported so far had a display clock rate that ended up
using a divider of 4, but testing with other displays show that only 4
seems to be functional.
This also aligns with what Allwinner is doing in their BSP, so let's just
hardcode that we want a divider of 4 when using the DSI output.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/074e88ae472f5e0492e26939c74b44fb4125ffbd.1549896081.git-series.maxime.ripard@bootlin.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.
On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.
Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
The A23's display pipeline is similar to the A33. Differences include:
- Display backend supports larger layers, 8192x8192 instead of 2048x2048
- TCON has DMA input
- There is no SAT module packed in the display backend
Add support for the display pipeline and its components.
As the MIPI DSI output device is not officially documented, and there
are no A23 reference devices to test it, it is not covered by this
patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-7-wens@csie.org
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
Some panels need an active-low data enable (DE) signal for the RGB
interface. This requires flipping a bit in the TCON0 polarity register
when setting up the mode for the RGB interface.
Match the associated bus flag and use it to set the polarity inversion
bit for the DE signal when required.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-4-contact@paulk.fr
Features such as dithering and pixel data edge configuration currently
rely on the panel registered with the TCON driver. However, bridges are
also supported in addition to panels for RGB setup.
Instead of retrieving the connector from the panel, get it from the
encoder with the dedicated helper.
Even in the case of bridges, the connector is registered with the
encoder from our driver and is accessible when iterating connectors.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-3-contact@paulk.fr
Passing the encoder to the TCON RGB setup functions allows accessing the
connector from the encoder directly instead of relying on the panel.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-2-contact@paulk.fr
If tcon->panel pointer is NULL, trying to dereference from it
(i.e. tcon->panel->connector) will cause a null pointer dereference.
Add tcon->panel null pointer check before calling
sun4i_tcon0_mode_set_dithering().
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Fixes: f11adcecbd ("drm/sun4i: tcon: Add dithering support for
RGB565/RGB666 LCD panels")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com
Since tcon->panel is a pointer returned by of_drm_find_panel() need to
check if it is not NULL, hence a valid pointer.
IS_ERR() instead checks return error values, not NULL pointers.
Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)".
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined!
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: cf77d79b4e ("drm/sun4i: tcon: Add another way for matching mixers with tcon")
Fixes: 0305189afb ("drm/sun4i: tcon: Add support for R40 TCON")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Matt Hart <matthew.hart@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
The hardware supports dithering on TCON channel 0 which is used for LCD
panels.
Dithering is a method of approximating a color from a mixture of other
colors when the required color isn't available. It reduces color
banding artifacts that can be observed when displaying gradients
(e.g. grayscale gradients). This may occur when the image that needs
to be displayed is 24-bit but the LCD panel is a lower bit depth and
does not perform dithering on its own.
Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-4-wens@csie.org
sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device *
as its second parameter. This is derived from drm_encoder.
The DSI encoder is tied to the CPU interface mode of the TCON as a
special case. In theory, if hardware were available, we could also
support normal CPU interface modes. It is better to pass the generic
encoder instead of the specialized mipi_dsi_device, and handle the
differences inside the function.
Passing the encoder would also enable the function to pass it, or any
other data structures related to it, to other functions expecting it.
One such example would be dithering support that will be added in a
later patch, which looks at properties tied to the connector to
determine whether dithering should be enabled or not.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-2-wens@csie.org
R40 TV TCON is basically the same as on A83T. However, it needs special
handling, because it has to set up TCON TOP muxes at runtime.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-14-jernej.skrabec@siol.net
Till now, new way of matching engines with TCONs was reading their
respective ids and match them by those ids. However, with introduction
of TCON TOP, that might not be so straightforward anymore.
- there might be more TCONs that engines (mixers)
- TCON ids might have non-consecutive ids
Workaround that by matching mixer id with TCON index from TCON list.
For example, R40 has 2 mixers and 4 TCONs. Board designer can choose
2 outputs, which are connected to any of those 4 TCONs. As long as there
are only 2 TCONs enabled in DT, using index in list as alternative id,
will allow to match them with mixer 0 and 1.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-13-jernej.skrabec@siol.net
Handle both positive and negative dclk polarity,
according to bus_flags, taking care of this:
On A20 and similar SoCs, the only way to achieve Positive Edge
(Rising Edge), is setting dclk clock phase to 2/3(240°).
By default TCON works in Negative Edge(Falling Edge), this is why phase
is set to 0 in that case.
Unfortunately there's no way to logically invert dclk through IO_POL
register.
The only acceptable way to work, triple checked with scope,
is using clock phase set to 0° for Negative Edge and set to 240° for
Positive Edge.
On A33 and similar SoCs there would be a 90° phase option, but it divides
also dclk by 2.
This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers
for using A33 90° phase divided by 2 and consequently increase code
complexity.
Check if panel is used. TCON can also handle VGA DAC, then panel could
be empty.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718142357.120998-1-giulio.benetti@micronovasrl.com
Function sun4i_tcon_find_engine_traverse() doesn't release node if it
needs to traverse of graph deeper than 1 level.
Fix this by calling of_node_put().
Fixes: 49836b11fe ("drm/sun4i: tcon: Generalize engine search algorithm")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-6-jernej.skrabec@siol.net
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make
sense to check if panel or bridge is connected to them.
Check if TCON has channel 0 and only then check for connected panel or
bridges.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-13-jernej.skrabec@siol.net
LVDS and RGB interfaces are always connected to TCONs which have channel
0. It doesn't make sense to try to init them on TV TCONs.
Add a check if TCON has channel 0 before trying to init LVDS or RGB
interface.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-12-jernej.skrabec@siol.net
Current "old" method to find engine worked pretty well for DE2. However,
it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON
TOP has multiple input ports, but current engine search algorithm
expects only one.
This can be fixed by first looking for output port id and selecting
matching input by subtracting 1 for the next round. This work even if
there is only one input and output.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-11-jernej.skrabec@siol.net
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.
-----BEGIN PGP SIGNATURE-----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=ngPr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v4.18-rc2:
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
This reverts commit 2c17a4368a.
The offending commit triggers a run-time fault when accessing the panel
element of the sun4i_tcon structure when no such panel is attached.
It was apparently assumed in said commit that a panel is always used with
the TCON. Although it is often the case, this is not always true.
For instance a bridge might be used instead of a panel.
This issue was discovered using an A13-OLinuXino, that uses the TCON
in RGB mode for a simple DAC-based VGA bridge.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180613081647.31183-1-paul.kocialkowski@bootlin.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
The Allwinner A80 SoC has 2 documented TCONs. The display pipeline
diagram from the user manual shows a third TCON, but it's missing
an interrupt line, and its registers are not explained either.
It's also not used in Allwinner's vendor BSP.
The first TCON only has channel 0, for LCD panel output. The TCON
hardware setup is peculiar in that the eDP reset must also be
deasserted to allow access to the TCON. How the eDP module is wired
in the SoC itself is never explained.
The second TCON only has channel 1, and its output is connected to
the HDMI encoder block.
This patch adds a "needs_edp_reset" field to the tcon quirks structure,
and adds quirks and compatible strings for the 2 documented TCONs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315114136.24747-4-wens@csie.org
Handle both positive and negative dclk polarity,
according to bus_flags, taking care of this:
On A20 and similar SoCs, the only way to achieve Positive Edge
(Rising Edge), is setting dclk clock phase to 2/3(240°).
By default TCON works in Negative Edge(Falling Edge), this is why phase
is set to 0 in that case.
Unfortunately there's no way to logically invert dclk through IO_POL
register.
The only acceptable way to work, triple checked with scope,
is using clock phase set to 0° for Negative Edge and set to 240° for
Positive Edge.
On A33 and similar SoCs there would be a 90° phase option, but it divides
also dclk by 2.
This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers
for using A33 90° phase divided by 2 and consequently increase code
complexity.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520963677-124239-1-git-send-email-giulio.benetti@micronovasrl.com
Currently the exclusivity is enabled when the rate is set by
the mode setting functions. These functions are called by
mode_set_nofb callback of drm_crc_helper. Then exclusivity
is disabled when tcon is disabled by atomic_disable
callback.
What happens is that mode_set_nofb can be called once when
mode changes, and afterwards the system can call atomic_enable
and atomic_disable multiple times without further calls to
mode_set_nofb.
This happens:
mode_set_nofb - clk exclusivity is enabled
atomic_enable
atomic_disable - clk exclusivity is disabled
atomic_enable
atomic_disable - clk exclusivity is already disabled, leading to WARN
in clk_rate_exclusive_put
Solution is to enable exclusivity in sun4i_tcon_channel_set_status.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180310110511.14697-1-megous@megous.com
The current logic to deal with old DT missing the LVDS properties doesn't
take into account whether the LVDS output is supported in the first place,
resulting in spurious error messages on SoCs where it doesn't even matter.
Introduce a new TCON flag to list if LVDS is supported at all to prevent
this from happening.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com
Currently exclusive TCON clock lock is never released, which, for
example, prevents changing resolution on HDMI.
In order to fix that, release clock when disabling TCON. TCON is always
disabled first before new mode is set.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-7-jernej.skrabec@siol.net
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't
work (there's output but it's garbled). I compared some older patches for LVDS
support with the mainlined ones and this change is missing from mainline Linux.
I don't know what the register does exactly and the harcoded register value
doesn't inspire much confidence that it will work in a general case, so I'm
sending this RFC.
This patch fixes the issue on A83T.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222161217.23904-1-megous@megous.com
Jernej Skrabec