Fix all the alignment with open parenthesis issues
detected by checkpatch
Signed-off-by: Daniela Mormocea <daniela.mormocea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just a minor code refactoring and adding some const prefix.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current code, the mute control is dealt in a special manner,
modifying the current volume and saving the old volume, etc. This is
inconsistent (e.g. change the volume while muted, then unmute), and
way too complex.
Also, the whole volume handling code has conversion between ALSA
volume and raw volume values, which can lead to another
inconsistency and complexity.
This patch simplifies these points:
- The ALSA volume value is saved in chip->volume
- volume->mute saves the mute state
- The mute state is evaluated only when the actual volume is passed to
the hardware, bcm2835_audio_set_ctls()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The avail_substreams bit mask is checked for the possible racy
accesses, but this cannot happen in practice; i.e. the assignment and
the check are superfluous.
Let's rip them off.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only a few of them are really needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "IEC958 Playback Stream" control does basically the very same
thing as "IEC958 Playback Default" redundantly. The former should
have been stream-specific and restored after closing the stream, but
we don't do in that way.
Since it's nothing but confusion, remove this fake.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in
all places, which don't make sense. Replace them with the simple
mutex_lock().
Also taking a mutex lock right after creating it for each PCM object
is nonsense, too. It cannot be racy at that point. We can get rid of
it.
Last but not least, initializing chip->audio_mutex at each place is
error-prone. Initialize properly at creating the chip object in
snd_bcm2835_create() instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SPDX tag is in all
drivers/staging/vc04_services/bcm2835-audio/ files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Fix up the bcm2835-audio driver to have a proper SPDX identifier, based
on the license text in the file itself. The SPDX identifier is a
legally binding shorthand, which can be used instead of the full boiler
plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <bcm-kernel-feedback-list@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary log messages in the driver which are just tracking
function entry and exits.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The firmware for the Raspberry PI already supports simultanous output
of audio through both the HDMI and the Headphone jack. The current
implementation of ALSA doesn't expose this well to user mode since
the firmware audio is represented as a single card.
A newer approach is taken here and a virtual card is created for each
output(HDMI, Headphones, and Traditional ALSA). The firmware has
the concept of channels or streams for which the number to use is
passed in the device tree. These streams are allocated to each of the
virtual cards.
As a side effect of this change, since each output is represented
independenly it's now very easy to use PulseAudio to control the
priorities of the outputs.
Testing:
Audacity and VLC were both loaded at the same time. Each application
was assigned to a different card. With this change I was able to play
different music files at the same time through the HDMI and Headphones
jacks and control the audio independently.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch issue:
Alignment should match open parenthesis
Signed-off-by: Sreya Mittal <sreyamittal5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dev_err(... in place of printk(KERN_ERR ...
Problem found by checkpatch
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the warning: Blank lines aren't necessary after an open brace
'{' issued by checkpatch on bcm2835-ctl.c
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix block comment formatting to suppress the following warning thrown by
checkpatch: Block comments use a trailing */ on a separate line
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keep logical continuations on the same line to improve code readability
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove instances of unnecessary blank space after cast in bcm2835-ctl.c
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bcm2835-audio driver is part of v04_services, so it makes
sense for it to be located under vc04_services to make
configuration clearer.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
