commit c7de87ff9dac5f396f62d584f3908f80ddc0e07b upstream.
[ This problem is in mainline, but only rt has the chops to be
able to detect it. ]
Lockdep reports a circular lock dependency between serv->sv_lock and
softirq_ctl.lock on system shutdown, when using a kernel built with
CONFIG_PREEMPT_RT=y, and a nfs mount exists.
This is due to the definition of spin_lock_bh on rt:
local_bh_disable();
rt_spin_lock(lock);
which forces a softirq_ctl.lock -> serv->sv_lock dependency. This is
not a problem as long as _every_ lock of serv->sv_lock is a:
spin_lock_bh(&serv->sv_lock);
but there is one of the form:
spin_lock(&serv->sv_lock);
This is what is causing the circular dependency splat. The spin_lock()
grabs the lock without first grabbing softirq_ctl.lock via local_bh_disable.
If later on in the critical region, someone does a local_bh_disable, we
get a serv->sv_lock -> softirq_ctrl.lock dependency established. Deadlock.
Fix is to make serv->sv_lock be locked with spin_lock_bh everywhere, no
exceptions.
[ OK ] Stopped target NFS client services.
Stopping Logout off all iSCSI sessions on shutdown...
Stopping NFS server and services...
[ 109.442380]
[ 109.442385] ======================================================
[ 109.442386] WARNING: possible circular locking dependency detected
[ 109.442387] 5.10.16-rt30 #1 Not tainted
[ 109.442389] ------------------------------------------------------
[ 109.442390] nfsd/1032 is trying to acquire lock:
[ 109.442392] ffff994237617f60 ((softirq_ctrl.lock).lock){+.+.}-{2:2}, at: __local_bh_disable_ip+0xd9/0x270
[ 109.442405]
[ 109.442405] but task is already holding lock:
[ 109.442406] ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90
[ 109.442415]
[ 109.442415] which lock already depends on the new lock.
[ 109.442415]
[ 109.442416]
[ 109.442416] the existing dependency chain (in reverse order) is:
[ 109.442417]
[ 109.442417] -> #1 (&serv->sv_lock){+.+.}-{0:0}:
[ 109.442421] rt_spin_lock+0x2b/0xc0
[ 109.442428] svc_add_new_perm_xprt+0x42/0xa0
[ 109.442430] svc_addsock+0x135/0x220
[ 109.442434] write_ports+0x4b3/0x620
[ 109.442438] nfsctl_transaction_write+0x45/0x80
[ 109.442440] vfs_write+0xff/0x420
[ 109.442444] ksys_write+0x4f/0xc0
[ 109.442446] do_syscall_64+0x33/0x40
[ 109.442450] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 109.442454]
[ 109.442454] -> #0 ((softirq_ctrl.lock).lock){+.+.}-{2:2}:
[ 109.442457] __lock_acquire+0x1264/0x20b0
[ 109.442463] lock_acquire+0xc2/0x400
[ 109.442466] rt_spin_lock+0x2b/0xc0
[ 109.442469] __local_bh_disable_ip+0xd9/0x270
[ 109.442471] svc_xprt_do_enqueue+0xc0/0x4d0
[ 109.442474] svc_close_list+0x60/0x90
[ 109.442476] svc_close_net+0x49/0x1a0
[ 109.442478] svc_shutdown_net+0x12/0x40
[ 109.442480] nfsd_destroy+0xc5/0x180
[ 109.442482] nfsd+0x1bc/0x270
[ 109.442483] kthread+0x194/0x1b0
[ 109.442487] ret_from_fork+0x22/0x30
[ 109.442492]
[ 109.442492] other info that might help us debug this:
[ 109.442492]
[ 109.442493] Possible unsafe locking scenario:
[ 109.442493]
[ 109.442493] CPU0 CPU1
[ 109.442494] ---- ----
[ 109.442495] lock(&serv->sv_lock);
[ 109.442496] lock((softirq_ctrl.lock).lock);
[ 109.442498] lock(&serv->sv_lock);
[ 109.442499] lock((softirq_ctrl.lock).lock);
[ 109.442501]
[ 109.442501] *** DEADLOCK ***
[ 109.442501]
[ 109.442501] 3 locks held by nfsd/1032:
[ 109.442503] #0: ffffffff93b49258 (nfsd_mutex){+.+.}-{3:3}, at: nfsd+0x19a/0x270
[ 109.442508] #1: ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90
[ 109.442512] #2: ffffffff93a81b20 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0x5/0xc0
[ 109.442518]
[ 109.442518] stack backtrace:
[ 109.442519] CPU: 0 PID: 1032 Comm: nfsd Not tainted 5.10.16-rt30 #1
[ 109.442522] Hardware name: Supermicro X9DRL-3F/iF/X9DRL-3F/iF, BIOS 3.2 09/22/2015
[ 109.442524] Call Trace:
[ 109.442527] dump_stack+0x77/0x97
[ 109.442533] check_noncircular+0xdc/0xf0
[ 109.442546] __lock_acquire+0x1264/0x20b0
[ 109.442553] lock_acquire+0xc2/0x400
[ 109.442564] rt_spin_lock+0x2b/0xc0
[ 109.442570] __local_bh_disable_ip+0xd9/0x270
[ 109.442573] svc_xprt_do_enqueue+0xc0/0x4d0
[ 109.442577] svc_close_list+0x60/0x90
[ 109.442581] svc_close_net+0x49/0x1a0
[ 109.442585] svc_shutdown_net+0x12/0x40
[ 109.442588] nfsd_destroy+0xc5/0x180
[ 109.442590] nfsd+0x1bc/0x270
[ 109.442595] kthread+0x194/0x1b0
[ 109.442600] ret_from_fork+0x22/0x30
[ 109.518225] nfsd: last server has exited, flushing export cache
[ OK ] Stopped NFSv4 ID-name mapping service.
[ OK ] Stopped GSSAPI Proxy Daemon.
[ OK ] Stopped NFS Mount Daemon.
[ OK ] Stopped NFS status monitor for NFSv2/3 locking..
Fixes: 719f8bcc88 ("svcrpc: fix xpt_list traversal locking on shutdown")
Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b25b60d7bfb02a74bc3c2d998e09aab159df8059 ]
'maxlen' is the total size of the destination buffer. There is only one
caller and this value is 256.
When we compute the size already used and what we would like to add in
the buffer, the trailling NULL character is not taken into account.
However, this trailling character will be added by the 'strcat' once we
have checked that we have enough place.
So, there is a off-by-one issue and 1 byte of the stack could be
erroneously overwridden.
Take into account the trailling NULL, when checking if there is enough
place in the destination buffer.
While at it, also replace a 'sprintf' by a safer 'snprintf', check for
output truncation and avoid a superfluous 'strlen'.
Fixes: dc9a16e49d ("svc: Add /proc/sys/sunrpc/transport files")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ cel: very minor fix to documenting comment
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 23cf1ee1f1869966b75518c59b5cbda4c6c92450 upstream.
Utilize the xpo_release_rqst transport method to ensure that each
rqstp's svc_rdma_recv_ctxt object is released even when the server
cannot return a Reply for that rqstp.
Without this fix, each RPC whose Reply cannot be sent leaks one
svc_rdma_recv_ctxt. This is a 2.5KB structure, a 4KB DMA-mapped
Receive buffer, and any pages that might be part of the Reply
message.
The leak is infrequent unless the network fabric is unreliable or
Kerberos is in use, as GSS sequence window overruns, which result
in connection loss, are more common on fast transports.
Fixes: 3a88092ee3 ("svcrdma: Preserve Receive buffer until svc_rdma_sendto")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6221f1d9b63fed6260273e59a2b89ab30537a811 upstream.
Currently, after the forward channel connection goes away,
backchannel operations are causing soft lockups on the server
because call_transmit_status's SOFTCONN logic ignores ENOTCONN.
Such backchannel Calls are aggressively retried until the client
reconnects.
Backchannel Calls should use RPC_TASK_NOCONNECT rather than
RPC_TASK_SOFTCONN. If there is no forward connection, the server is
not capable of establishing a connection back to the client, thus
that backchannel request should fail before the server attempts to
send it. Commit 58255a4e3c ("NFSD: NFSv4 callback client should
use RPC_TASK_SOFTCONN") was merged several years before
RPC_TASK_NOCONNECT was available.
Because setup_callback_client() explicitly sets NOPING, the NFSv4.0
callback connection depends on the first callback RPC to initiate
a connection to the client. Thus NFSv4.0 needs to continue to use
RPC_TASK_SOFTCONN.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Temporary sockets should inherit the credential (and hence the user
namespace) from the parent listener transport.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In order to be able to interpret uids and gids correctly in knfsd, we
should cache the user namespace of the process that created the RPC
server's listener. To do so, we refcount the credential of that process.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the rpc server, When something happens that might be reason to wake
up a thread to do something, what we do is
- modify xpt_flags, sk_sock->flags, xpt_reserved, or
xpt_nr_rqsts to indicate the new situation
- call svc_xprt_enqueue() to decide whether to wake up a thread.
svc_xprt_enqueue may require multiple conditions to be true before
queueing up a thread to handle the xprt. In the SMP case, one of the
other CPU's may have set another required condition, and in that case,
although both CPUs run svc_xprt_enqueue(), it's possible that neither
call sees the writes done by the other CPU in time, and neither one
recognizes that all the required conditions have been set. A socket
could therefore be ignored indefinitely.
Add memory barries to ensure that any svc_xprt_enqueue() call will
always see the conditions changed by other CPUs before deciding to
ignore a socket.
I've never seen this race reported. In the unlikely event it happens,
another event will usually come along and the problem will fix itself.
So I don't think this is worth backporting to stable.
Chuck tried this patch and said "I don't see any performance
regressions, but my server has only a single last-level CPU cache."
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use READ_ONCE() to tell the compiler to not optimse away the read of
xprt->xpt_flags in svc_xprt_release_slot().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
_svc_create_xprt() returns positive port number
so its non-zero return value is not an error
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
if node have NFSv41+ mounts inside several net namespaces
it can lead to use-after-free in svc_process_common()
svc_process_common()
/* Setup reply header */
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE
svc_process_common() can use incorrect rqstp->rq_xprt,
its caller function bc_svc_process() takes it from serv->sv_bc_xprt.
The problem is that serv is global structure but sv_bc_xprt
is assigned per-netnamespace.
According to Trond, the whole "let's set up rqstp->rq_xprt
for the back channel" is nothing but a giant hack in order
to work around the fact that svc_process_common() uses it
to find the xpt_ops, and perform a couple of (meaningless
for the back channel) tests of xpt_flags.
All we really need in svc_process_common() is to be able to run
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr()
Bruce J Fields points that this xpo_prep_reply_hdr() call
is an awfully roundabout way just to do "svc_putnl(resv, 0);"
in the tcp case.
This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(),
now it calls svc_process_common() with rqstp->rq_xprt = NULL.
To adjust reply header svc_process_common() just check
rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case.
To handle rqstp->rq_xprt = NULL case in functions called from
svc_process_common() patch intruduces net namespace pointer
svc_rqst->rq_bc_net and adjust SVC_NET() definition.
Some other function was also adopted to properly handle described case.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Fixes: 23c20ecd44 ("NFS: callback up - users counting cleanup")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
already supported COPY, by copying a limited amount of data and then
returning a short result, letting the client resend. The asynchronous
protocol should offer better performance at the expense of some
complexity.
The other highlight is Trond's work to convert the duplicate reply cache
to a red-black tree, and to move it and some other server caches to RCU.
(Previously these have meant taking global spinlocks on every RPC.)
Otherwise, some RDMA work and miscellaneous bugfixes.
-----BEGIN PGP SIGNATURE-----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=TTo0
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Olga added support for the NFSv4.2 asynchronous copy protocol. We
already supported COPY, by copying a limited amount of data and then
returning a short result, letting the client resend. The asynchronous
protocol should offer better performance at the expense of some
complexity.
The other highlight is Trond's work to convert the duplicate reply
cache to a red-black tree, and to move it and some other server caches
to RCU. (Previously these have meant taking global spinlocks on every
RPC)
Otherwise, some RDMA work and miscellaneous bugfixes"
* tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux: (30 commits)
lockd: fix access beyond unterminated strings in prints
nfsd: Fix an Oops in free_session()
nfsd: correctly decrement odstate refcount in error path
svcrdma: Increase the default connection credit limit
svcrdma: Remove try_module_get from backchannel
svcrdma: Remove ->release_rqst call in bc reply handler
svcrdma: Reduce max_send_sges
nfsd: fix fall-through annotations
knfsd: Improve lookup performance in the duplicate reply cache using an rbtree
knfsd: Further simplify the cache lookup
knfsd: Simplify NFS duplicate replay cache
knfsd: Remove dead code from nfsd_cache_lookup
SUNRPC: Simplify TCP receive code
SUNRPC: Replace the cache_detail->hash_lock with a regular spinlock
SUNRPC: Remove non-RCU protected lookup
NFS: Fix up a typo in nfs_dns_ent_put
NFS: Lockless DNS lookups
knfsd: Lockless lookup of NFSv4 identities.
SUNRPC: Lockless server RPCSEC_GSS context lookup
knfsd: Allow lockless lookups of the exports
...
In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Treat socket write space handling in the same way we now treat transport
congestion: by denying the XPRT_LOCK until the transport signals that it
has free buffer space.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Record the time between when a rqstp is enqueued on a transport
and when it is dequeued. This includes how long the rqstp waits on
the queue and how long it takes the kernel scheduler to wake a
nfsd thread to service it.
The svc_xprt_dequeue trace point is altered to include the number
of microseconds between xprt_enqueue and xprt_dequeue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Introduce a mechanism to report the server-side execution latency of
each RPC. The goal is to enable user space to filter the trace
record for latency outliers, build histograms, etc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
TP_printk defines a format string that is passed to user space for
converting raw trace event records to something human-readable.
My user space's printf (Oracle Linux 7), however, does not have a
%pI format specifier. The result is that what is supposed to be an
IP address in the output of "trace-cmd report" is just a string that
says the field couldn't be displayed.
To fix this, adopt the same approach as the client: maintain a pre-
formated presentation address for occasions when %pI is not
available.
The location of the trace_svc_send trace point is adjusted so that
rqst->rq_xprt is not NULL when the trace event is recorded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There doesn't seem to be a lot of value in calling trace_svc_recv
in the failing case.
1. There are two very common cases: one is the transport is not
ready, and the other is shutdown. Neither is terribly interesting.
2. The trace record for the failing case contains nothing but
the status code.
Therefore the trace point call site in the error exit is removed.
Since the trace point is now recording a length instead of a
status, rename the status field and remove the case that records a
zero XID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are three cases where svc_xprt_do_enqueue() returns without
waking an nfsd thread:
1. There is no work to do
2. The transport is already busy
3. There are no available nfsd threads
Only 3. is truly interesting. Move the trace point so it records
that there was work to do and either an nfsd thread was awoken, or
a free one could not found.
As an additional clean up, remove a redundant comment and a couple
of dprintk call sites.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reduce the amount of noise generated by trace_svc_xprt_dequeue by
moving it to the end of svc_get_next_xprt. This generates exactly
one trace event when a ready xprt is found, rather than spurious
events when there is no work to do. The empty events contain no
information that can't be obtained simply by tracing function calls
to svc_xprt_dequeue.
A small additional benefit is simplification of the svc_xprt_event
trace class, which no longer has to handle the case when the @xprt
parameter is NULL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Instead of returning a value that is used to set or clear
a bit, just make ->xpo_secure_port mangle that bit, and return void.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Noticed during code inspection that there is already a
local automatic variable "xprt" so dereferencing rqst->rq_xprt
again is unnecessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
- fix a number of races in the NFSv4+ state code.
- fix some shutdown crashes in multiple-network-namespace cases.
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading.
-----BEGIN PGP SIGNATURE-----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=PBs+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Lots of good bugfixes, including:
- fix a number of races in the NFSv4+ state code
- fix some shutdown crashes in multiple-network-namespace cases
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading"
* tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits)
SUNRPC: Improve ordering of transport processing
nfsd: deal with revoked delegations appropriately
svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
nfsd: use nfs->ns.inum as net ID
rpc: remove some BUG()s
svcrdma: Preserve CB send buffer across retransmits
nfds: avoid gettimeofday for nfssvc_boot time
fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t
fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t
fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t
lockd: double unregister of inetaddr notifiers
nfsd4: catch some false session retries
nfsd4: fix cached replies to solo SEQUENCE compounds
sunrcp: make function _svc_create_xprt static
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
nfsd: use ARRAY_SIZE
nfsd: give out fewer session slots as limit approaches
nfsd: increase DRC cache limit
nfsd: remove unnecessary nofilehandle checks
nfs_common: convert int to bool
...
Since it can take a while before a specific thread gets scheduled, it
is better to just implement a first come first served queue mechanism.
That way, if a thread is already scheduled and is idle, it can pick up
the work to do from the queue.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The function _svc_create_xprt is local to the source and
does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol '_svc_create_xprt' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
svcrdma needs 259 pages allocated to receive 1MB NFSv4.0 WRITE requests:
- 1 page for the transport header and head iovec
- 256 pages for the data payload
- 1 page for the trailing GETATTR request (since NFSD XDR decoding
does not look for a tail iovec, the GETATTR is stuck at the end
of the rqstp->rq_arg.pages list)
- 1 page for building the reply xdr_buf
But RPCSVC_MAXPAGES is already 259 (on x86_64). The problem is that
svc_alloc_arg never allocates that many pages. To address this:
1. The final element of rq_pages always points to NULL. To
accommodate up to 259 pages in rq_pages, add an extra element
to rq_pages for the array termination sentinel.
2. Adjust the calculation of "pages" to match how RPCSVC_MAXPAGES
is calculated, so it can go up to 259. Bruce noted that the
calculation assumes sv_max_mesg is a multiple of PAGE_SIZE,
which might not always be true. I didn't change this assumption.
3. Change the loop boundaries to allow 259 pages to be allocated.
Additional clean-up: WARN_ON_ONCE adds an extra conditional branch,
which is basically never taken. And there's no need to dump the
stack here because svc_alloc_arg has only one caller.
Keeping that NULL "array termination sentinel"; there doesn't appear to
be any code that depends on it, only code in nfsd_splice_actor() which
needs the 259th element to be initialized to *something*. So it's
possible we could just keep the array at 259 elements and drop that
final NULL, but we're being conservative for now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement wraparound-safe refcount_t and kref_t types based on
generic atomic primitives (Peter Zijlstra)
- Improve and fix the ww_mutex code (Nicolai Hähnle)
- Add self-tests to the ww_mutex code (Chris Wilson)
- Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
Bueso)
- Micro-optimize the current-task logic all around the core kernel
(Davidlohr Bueso)
- Tidy up after recent optimizations: remove stale code and APIs,
clean up the code (Waiman Long)
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
fork: Fix task_struct alignment
locking/spinlock/debug: Remove spinlock lockup detection code
lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
lkdtm: Convert to refcount_t testing
kref: Implement 'struct kref' using refcount_t
refcount_t: Introduce a special purpose refcount type
sched/wake_q: Clarify queue reinit comment
sched/wait, rcuwait: Fix typo in comment
locking/mutex: Fix lockdep_assert_held() fail
locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
locking/rwsem: Reinit wake_q after use
locking/rwsem: Remove unnecessary atomic_long_t casts
jump_labels: Move header guard #endif down where it belongs
locking/atomic, kref: Implement kref_put_lock()
locking/ww_mutex: Turn off __must_check for now
locking/atomic, kref: Avoid more abuse
locking/atomic, kref: Use kref_get_unless_zero() more
locking/atomic, kref: Kill kref_sub()
locking/atomic, kref: Add kref_read()
locking/atomic, kref: Add KREF_INIT()
...
Since we need to change the implementation, stop exposing internals.
Provide kref_read() to read the current reference count; typically
used for debug messages.
Kills two anti-patterns:
atomic_read(&kref->refcount)
kref->refcount.counter
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The inet6addr_chain is an atomic notifier chain, so we can't call
anything that might sleep (like lock_sock)... instead of closing the
socket from svc_age_temp_xprts_now (which is called by the notifier
function), just have the rpc service threads do it instead.
Cc: stable@vger.kernel.org
Fixes: c3d4879e01 "sunrpc: Add a function to close..."
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow the user to limit the number of requests serviced through a single
connection, to help prevent faster clients from starving slower clients.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Dropping and/or deferring requests has an impact on performance. Let's
make sure we can trace those events.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a tracepoint to track when the processing of incoming RPC data gets
deferred due to out-of-space issues on the outgoing transport.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The spec allows backchannels for multiple clients to share the same tcp
connection. When that happens, we need to use the same xprt for all of
them. Similarly, we need the same xps.
This fixes list corruption introduced by the multipath code.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
This should fix failures like:
# rpc.nfsd --rdma
rpc.nfsd: Unable to request RDMA services: Protocol not supported
Reported-by: Steve Dickson <steved@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a function svc_age_temp_xprts_now() to close temporary transports
whose xpt_local matches the address passed in server_addr immediately
instead of waiting for them to be closed by the timer function.
The function is intended to be used by notifier_blocks that will be
added to nfsd and lockd that will run when an ip address is deleted.
This will eliminate the ACK storms and client hangs that occur in
HA-NFS configurations where nfsd & lockd is left running on the cluster
nodes all the time and the NFS 'service' is migrated back and forth
within a short timeframe.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For now, all services use svc_xprt_do_enqueue, but once we add
workqueue-based service support, we'll need to do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The BKL is completely out of the picture in the lockd and sunrpc code
these days. Update the antiquated comments that refer to it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...move the WARN_ON_ONCE inside the following if block since they use
the same condition.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These were useful when I was tracking down a race condition between
svc_xprt_do_enqueue and svc_get_next_xprt.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Testing has shown that the pool->sp_lock can be a bottleneck on a busy
server. Every time data is received on a socket, the server must take
that lock in order to dequeue a thread from the sp_threads list.
Address this problem by eliminating the sp_threads list (which contains
threads that are currently idle) and replacing it with a RQ_BUSY flag in
svc_rqst. This allows us to walk the sp_all_threads list under the
rcu_read_lock and find a suitable thread for the xprt by doing a
test_and_set_bit.
Note that we do still have a potential atomicity problem however with
this approach. We don't want svc_xprt_do_enqueue to set the
rqst->rq_xprt pointer unless a test_and_set_bit of RQ_BUSY returned
zero (which indicates that the thread was idle). But, by the time we
check that, the bit could be flipped by a waking thread.
To address this, we acquire a new per-rqst spinlock (rq_lock) and take
that before doing the test_and_set_bit. If that returns false, then we
can set rq_xprt and drop the spinlock. Then, when the thread wakes up,
it must set the bit under the same spinlock and can trust that if it was
already set then the rq_xprt is also properly set.
With this scheme, the case where we have an idle thread no longer needs
to take the highly contended pool->sp_lock at all, and that removes the
bottleneck.
That still leaves one issue: What of the case where we walk the whole
sp_all_threads list and don't find an idle thread? Because the search is
lockess, it's possible for the queueing to race with a thread that is
going to sleep. To address that, we queue the xprt and then search again.
If we find an idle thread at that point, we can't attach the xprt to it
directly since that might race with a different thread waking up and
finding it. All we can do is wake the idle thread back up and let it
attempt to find the now-queued xprt.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll be removing some spinlocking around the socket
and thread queueing code in order to fix some contention problems. At
that point, the stats counters will no longer be protected by the
sp_lock.
Change the counters to atomic_long_t fields, except for the
"sockets_queued" counter which will still be manipulated under a
spinlock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The way that svc_wake_up works is a bit inefficient. It walks all of the
available pools for a service and either wakes up a task in each one or
sets the SP_TASK_PENDING flag in each one.
When svc_wake_up is called, there is no need to wake up more than one
thread to do this work. In practice, only lockd currently uses this
function and it's single threaded anyway. Thus, this just boils down to
doing a wake up of a thread in pool 0 or setting a single flag.
Eliminate the for loop in this function and change it to just operate on
pool 0. Also update the comments that sit above it and get rid of some
code that has been commented out for years now.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll want to be able to handle this flag without
holding the sp_lock. Change this field to an unsigned long flags
field, and declare a new flag in it that can be managed with atomic
bitops.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
