Commit Graph

122 Commits

Author SHA1 Message Date
Eric Dumazet
3ef7cf57c7 net: use skb_queue_empty_lockless() in poll() handlers
Many poll() handlers are lockless. Using skb_queue_empty_lockless()
instead of skb_queue_empty() is more appropriate.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28 13:33:41 -07:00
Arnd Bergmann
c7cbdbf29f net: rework SIOCGSTAMP ioctl handling
The SIOCGSTAMP/SIOCGSTAMPNS ioctl commands are implemented by many
socket protocol handlers, and all of those end up calling the same
sock_get_timestamp()/sock_get_timestampns() helper functions, which
results in a lot of duplicate code.

With the introduction of 64-bit time_t on 32-bit architectures, this
gets worse, as we then need four different ioctl commands in each
socket protocol implementation.

To simplify that, let's add a new .gettstamp() operation in
struct proto_ops, and move ioctl implementation into the common
sock_ioctl()/compat_sock_ioctl_trans() functions that these all go
through.

We can reuse the sock_get_timestamp() implementation, but generalize
it so it can deal with both native and compat mode, as well as
timeval and timespec structures.

Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/lkml/CAK8P3a038aDQQotzua_QtKGhq8O9n+rdiz2=WDCp82ys8eUT+A@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19 14:07:40 -07:00
Matthias Kaehlcke
c4f5627f7e Bluetooth: Fix locking in bt_accept_enqueue() for BH context
With commit e163376220 ("Bluetooth: Handle bt_accept_enqueue() socket
atomically") lock_sock[_nested]() is used to acquire the socket lock
before manipulating the socket. lock_sock[_nested]() may block, which
is problematic since bt_accept_enqueue() can be called in bottom half
context (e.g. from rfcomm_connect_ind()):

[<ffffff80080d81ec>] __might_sleep+0x4c/0x80
[<ffffff800876c7b0>] lock_sock_nested+0x24/0x58
[<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth]
[<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm]

Add a parameter to bt_accept_enqueue() to indicate whether the
function is called from BH context, and acquire the socket lock
with bh_lock_sock_nested() if that's the case.

Also adapt all callers of bt_accept_enqueue() to pass the new
parameter:

- l2cap_sock_new_connection_cb()
  - uses lock_sock() to lock the parent socket => process context

- rfcomm_connect_ind()
  - acquires the parent socket lock with bh_lock_sock() => BH
    context

- __sco_chan_add()
  - called from sco_chan_add(), which is called from sco_connect().
    parent is NULL, hence bt_accept_enqueue() isn't called in this
    code path and we can ignore it
  - also called from sco_conn_ready(). uses bh_lock_sock() to acquire
    the parent lock => BH context

Fixes: e163376220 ("Bluetooth: Handle bt_accept_enqueue() socket atomically")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2019-01-22 09:51:20 +01:00
Philipp Puschmann
b71c69c26b Bluetooth: Use lock_sock_nested in bt_accept_enqueue
Fixes this warning that was provoked by a pairing:

[60258.016221] WARNING: possible recursive locking detected
[60258.021558] 4.15.0-RD1812-BSP #1 Tainted: G           O
[60258.027146] --------------------------------------------
[60258.032464] kworker/u5:0/70 is trying to acquire lock:
[60258.037609]  (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<87759073>] bt_accept_enqueue+0x3c/0x74
[60258.046863]
[60258.046863] but task is already holding lock:
[60258.052704]  (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88
[60258.062905]
[60258.062905] other info that might help us debug this:
[60258.069441]  Possible unsafe locking scenario:
[60258.069441]
[60258.075368]        CPU0
[60258.077821]        ----
[60258.080272]   lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
[60258.085510]   lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
[60258.090748]
[60258.090748]  *** DEADLOCK ***
[60258.090748]
[60258.096676]  May be due to missing lock nesting notation
[60258.096676]
[60258.103472] 5 locks held by kworker/u5:0/70:
[60258.107747]  #0:  ((wq_completion)%shdev->name#2){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc
[60258.117263]  #1:  ((work_completion)(&hdev->rx_work)){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc
[60258.126942]  #2:  (&conn->chan_lock){+.+.}, at: [<7877c8c3>] l2cap_connect+0x80/0x4f8
[60258.134806]  #3:  (&chan->lock/2){+.+.}, at: [<2e16c724>] l2cap_connect+0x8c/0x4f8
[60258.142410]  #4:  (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88
[60258.153043]
[60258.153043] stack backtrace:
[60258.157413] CPU: 1 PID: 70 Comm: kworker/u5:0 Tainted: G           O     4.15.0-RD1812-BSP #1
[60258.165945] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[60258.172485] Workqueue: hci0 hci_rx_work
[60258.176331] Backtrace:
[60258.178797] [<8010c9fc>] (dump_backtrace) from [<8010ccbc>] (show_stack+0x18/0x1c)
[60258.186379]  r7:80e55fe4 r6:80e55fe4 r5:20050093 r4:00000000
[60258.192058] [<8010cca4>] (show_stack) from [<809864e8>] (dump_stack+0xb0/0xdc)
[60258.199301] [<80986438>] (dump_stack) from [<8016ecc8>] (__lock_acquire+0xffc/0x11d4)
[60258.207144]  r9:5e2bb019 r8:630f974c r7:ba8a5940 r6:ba8a5ed8 r5:815b5220 r4:80fa081c
[60258.214901] [<8016dccc>] (__lock_acquire) from [<8016f620>] (lock_acquire+0x78/0x98)
[60258.222655]  r10:00000040 r9:00000040 r8:808729f0 r7:00000001 r6:00000000 r5:60050013
[60258.230491]  r4:00000000
[60258.233045] [<8016f5a8>] (lock_acquire) from [<806ee974>] (lock_sock_nested+0x64/0x88)
[60258.240970]  r7:00000000 r6:b796e870 r5:00000001 r4:b796e800
[60258.246643] [<806ee910>] (lock_sock_nested) from [<808729f0>] (bt_accept_enqueue+0x3c/0x74)
[60258.255004]  r8:00000001 r7:ba7d3c00 r6:ba7d3ea4 r5:ba7d2000 r4:b796e800
[60258.261717] [<808729b4>] (bt_accept_enqueue) from [<808aa39c>] (l2cap_sock_new_connection_cb+0x68/0x88)
[60258.271117]  r5:b796e800 r4:ba7d2000
[60258.274708] [<808aa334>] (l2cap_sock_new_connection_cb) from [<808a294c>] (l2cap_connect+0x190/0x4f8)
[60258.283933]  r5:00000001 r4:ba6dce00
[60258.287524] [<808a27bc>] (l2cap_connect) from [<808a4a14>] (l2cap_recv_frame+0x744/0x2cf8)
[60258.295800]  r10:ba6dcf24 r9:00000004 r8:b78d8014 r7:00000004 r6:bb05d000 r5:00000004
[60258.303635]  r4:bb05d008
[60258.306183] [<808a42d0>] (l2cap_recv_frame) from [<808a7808>] (l2cap_recv_acldata+0x210/0x214)
[60258.314805]  r10:b78e7800 r9:bb05d960 r8:00000001 r7:bb05d000 r6:0000000c r5:b7957a80
[60258.322641]  r4:ba6dce00
[60258.325188] [<808a75f8>] (l2cap_recv_acldata) from [<8087630c>] (hci_rx_work+0x35c/0x4e8)
[60258.333374]  r6:80e5743c r5:bb05d7c8 r4:b7957a80
[60258.338004] [<80875fb0>] (hci_rx_work) from [<8013dc7c>] (process_one_work+0x1a4/0x4fc)
[60258.346018]  r10:00000001 r9:00000000 r8:baabfef8 r7:ba997500 r6:baaba800 r5:baaa5d00
[60258.353853]  r4:bb05d7c8
[60258.356401] [<8013dad8>] (process_one_work) from [<8013e028>] (worker_thread+0x54/0x5cc)
[60258.364503]  r10:baabe038 r9:baaba834 r8:80e05900 r7:00000088 r6:baaa5d18 r5:baaba800
[60258.372338]  r4:baaa5d00
[60258.374888] [<8013dfd4>] (worker_thread) from [<801448f8>] (kthread+0x134/0x160)
[60258.382295]  r10:ba8310b8 r9:bb07dbfc r8:8013dfd4 r7:baaa5d00 r6:00000000 r5:baaa8ac0
[60258.390130]  r4:ba831080
[60258.392682] [<801447c4>] (kthread) from [<801080b4>] (ret_from_fork+0x14/0x20)
[60258.399915]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801447c4
[60258.407751]  r4:baaa8ac0 r3:baabe000

Signed-off-by: Philipp Puschmann <pp@emlix.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-18 14:10:29 +02:00
Linus Torvalds
a11e1d432b Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL
The poll() changes were not well thought out, and completely
unexplained.  They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.

Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead.  That gets rid of one of the new indirections.

But that doesn't fix the new complexity that is completely unwarranted
for the regular case.  The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.

[ This revert is a revert of about 30 different commits, not reverted
  individually because that would just be unnecessarily messy  - Linus ]

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28 10:40:47 -07:00
Linus Torvalds
408afb8d78 Merge branch 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull aio updates from Al Viro:
 "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly.

  The only thing I'm holding back for a day or so is Adam's aio ioprio -
  his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case),
  but let it sit in -next for decency sake..."

* 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  aio: sanitize the limit checking in io_submit(2)
  aio: fold do_io_submit() into callers
  aio: shift copyin of iocb into io_submit_one()
  aio_read_events_ring(): make a bit more readable
  aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way
  aio: take list removal to (some) callers of aio_complete()
  aio: add missing break for the IOCB_CMD_FDSYNC case
  random: convert to ->poll_mask
  timerfd: convert to ->poll_mask
  eventfd: switch to ->poll_mask
  pipe: convert to ->poll_mask
  crypto: af_alg: convert to ->poll_mask
  net/rxrpc: convert to ->poll_mask
  net/iucv: convert to ->poll_mask
  net/phonet: convert to ->poll_mask
  net/nfc: convert to ->poll_mask
  net/caif: convert to ->poll_mask
  net/bluetooth: convert to ->poll_mask
  net/sctp: convert to ->poll_mask
  net/tipc: convert to ->poll_mask
  ...
2018-06-04 13:57:43 -07:00
Christoph Hellwig
17112d8081 net/bluetooth: convert to ->poll_mask
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-26 09:16:44 +02:00
Christoph Hellwig
a9170e0a92 bluetooth: switch to proc_create_seq_data
And use proc private data directly instead of doing a detour
through seq->private and private state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:24:30 +02:00
Linus Torvalds
a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Linus Torvalds
b2fe5fa686 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Significantly shrink the core networking routing structures. Result
    of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

 2) Add netdevsim driver for testing various offloads, from Jakub
    Kicinski.

 3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

 4) Add a 2nd listener hash table for TCP, similar to what was done for
    UDP. From Martin KaFai Lau.

 5) Add eBPF based queue selection to tun, from Jason Wang.

 6) Lockless qdisc support, from John Fastabend.

 7) SCTP stream interleave support, from Xin Long.

 8) Smoother TCP receive autotuning, from Eric Dumazet.

 9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
    Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
    Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
    from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
    Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
    Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
    Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
  tls: Add support for encryption using async offload accelerator
  ip6mr: fix stale iterator
  net/sched: kconfig: Remove blank help texts
  openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
  tcp_nv: fix potential integer overflow in tcpnv_acked
  r8169: fix RTL8168EP take too long to complete driver initialization.
  qmi_wwan: Add support for Quectel EP06
  rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
  ipmr: Fix ptrdiff_t print formatting
  ibmvnic: Wait for device response when changing MAC
  qlcnic: fix deadlock bug
  tcp: release sk_frag.page in tcp_disconnect
  ipv4: Get the address of interface correctly.
  net_sched: gen_estimator: fix lockdep splat
  net: macb: Handle HRESP error
  net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
  ipv6: addrconf: break critical section in addrconf_verify_rtnl()
  ipv6: change route cache aging logic
  i40e/i40evf: Update DESC_NEEDED value to reflect larger value
  bnxt_en: cleanup DIM work on device shutdown
  ...
2018-01-31 14:31:10 -08:00
Markus Elfring
1b259904a2 Bluetooth: Use common error handling code in bt_init()
* Improve jump targets so that a bit of exception handling can be better
  reused at the end of this function.

* Adjust five condition checks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:40 +01:00
Al Viro
ade994f4f6 net: annotate ->poll() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27 16:20:04 -05:00
Reshetova, Elena
41c6d650f6 net: convert sock.sk_refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

This patch uses refcount_inc_not_zero() instead of
atomic_inc_not_zero_hint() due to absense of a _hint()
version of refcount API. If the hint() version must
be used, we might need to revisit API.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 07:39:08 -07:00
linzhang
173e7837a2 net: socket: mark socket protocol handler structs as const
Signed-off-by: linzhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16 11:54:07 -04:00
Dean Jenkins
27bfbc21a0 Bluetooth: Avoid bt_accept_unlink() double unlinking
There is a race condition between a thread calling bt_accept_dequeue()
and a different thread calling bt_accept_unlink(). Protection against
concurrency is implemented using sk locking. However, sk locking causes
serialisation of the bt_accept_dequeue() and bt_accept_unlink() threads.
This serialisation can cause bt_accept_dequeue() to obtain the sk from the
parent list but becomes blocked waiting for the sk lock held by the
bt_accept_unlink() thread. bt_accept_unlink() unlinks sk and this thread
releases the sk lock unblocking bt_accept_dequeue() which potentially runs
bt_accept_unlink() again on the same sk causing a crash. The attempt to
double unlink the same sk from the parent list can cause a NULL pointer
dereference crash due to bt_sk(sk)->parent becoming NULL on the first
unlink, followed by the second unlink trying to execute
bt_sk(sk)->parent->sk_ack_backlog-- in bt_accept_unlink() which crashes.

When sk is in the parent list, bt_sk(sk)->parent will be not be NULL.
When sk is removed from the parent list, bt_sk(sk)->parent is set to
NULL. Therefore, add a defensive check for bt_sk(sk)->parent not being
NULL to ensure that sk is still in the parent list after the sk lock has
been taken in bt_accept_dequeue(). If bt_sk(sk)->parent is detected as
being NULL then restart the loop so that the loop variables are refreshed
to use the latest values. This is necessary as list_for_each_entry_safe()
is not thread safe so causing a risk of an infinite loop occurring as sk
could point to itself.

In addition, in bt_accept_dequeue() increase the sk reference count to
protect against early freeing of sk. Early freeing can be possible if the
bt_accept_unlink() thread calls l2cap_sock_kill() or rfcomm_sock_kill()
functions before bt_accept_dequeue() gets the sk lock.

For test purposes, the probability of failure can be increased by putting
a msleep of 1 second in bt_accept_dequeue() between getting the sk and
waiting for the sk lock. This exposes the fact that the loop
list_for_each_entry_safe(p, n, &bt_sk(parent)->accept_q) is not safe from
threads that unlink sk from the list in parallel with the loop which can
cause sk to become stale within the loop.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:37 +02:00
Dean Jenkins
e163376220 Bluetooth: Handle bt_accept_enqueue() socket atomically
There is a small risk that bt_accept_unlink() runs concurrently with
bt_accept_enqueue() on the same socket. This scenario could potentially
lead to a NULL pointer dereference of the socket's parent member because
the socket can be on the list but the socket's parent member is not yet
updated by bt_accept_enqueue().

Therefore, add socket locking inside bt_accept_enqueue() so that the
socket is added to the list AND the parent's socket address is set in the
socket's parent member. The socket locking ensures that the socket is on
the list with a valid non-NULL parent member.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:37 +02:00
Ingo Molnar
174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Ezequiel Garcia
9dcbc313cd Bluetooth: Fix NULL pointer dereference in bt_sock_recvmsg
As per the comment in include/linux/net.h, the recvfrom handlers
should expect msg_name to be NULL. However, bt_sock_recvmsg()
is currently not checking it, which could lead to a NULL pointer
dereference.

The following NULL pointer dereference was produced while testing
L2CAP datagram reception. Note that the kernel is tainted due to
the r8723bs module being inserted. However, it seems the fix still
applies.

$ l2test -r -G
l2test[326]: Receiving ...
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = ee008000
[00000000] *pgd=7f896835
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in: r8723bs(O)
CPU: 0 PID: 326 Comm: l2test Tainted: G           O 4.8.0 #1
Hardware name: Allwinner sun7i (A20) Family
task: ef1c6880 task.stack: eea70000
PC is at __memzero+0x58/0x80
LR is at l2cap_skb_msg_name+0x1c/0x4c
pc : [<c02c47d8>]    lr : [<c0506278>]    psr: 00070013
sp : eea71e60  ip : 00000000  fp : 00034e1c
r10: 00000000  r9 : 00000000  r8 : eea71ed4
r7 : 000002a0  r6 : eea71ed8  r5 : 00000000  r4 : ee4a5d80
r3 : 00000000  r2 : 00000000  r1 : 0000000e  r0 : 00000000
Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM Segment none
Control: 10c5387d  Table: 7600806a  DAC: 00000051
Process l2test (pid: 326, stack limit = 0xeea70210)
Stack: (0xeea71e60 to 0xeea72000)
1e60: ee4a5d80 eeac2800 000002a0 c04d7114 173eefa0 00000000 c06ca68e 00000000
1e80: 00000001 eeac2800 eef23500 00000000 000002a0 eea71ed4 eea70000 c0504d50
1ea0: 00000000 00000000 eef23500 00000000 00000000 c044e8a0 eea71edc eea9f904
1ec0: bef89aa0 fffffff7 00000000 00035008 000002a0 00000000 00000000 00000000
1ee0: 00000000 00000000 eea71ed4 00000000 00000000 00000000 00004000 00000000
1f00: 0000011b c01078c4 eea70000 c044e5e4 00000000 00000000 642f0001 6c2f7665
1f20: 0000676f 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1f40: 00000000 00000000 00000000 00000000 00000000 ffffffff 00000001 bef89ad8
1f60: 000000a8 c01078c4 eea70000 00000000 00034e1c c01e6c74 00000000 00000000
1f80: 00034e1c 000341f8 00000000 00000123 c01078c4 c044e90c 00000000 00000000
1fa0: 000002a0 c0107700 00034e1c 000341f8 00000003 00035008 000002a0 00000000
1fc0: 00034e1c 000341f8 00000000 00000123 00000000 00000000 00011ffc 00034e1c
1fe0: 00000000 bef89aa4 0001211c b6eebb60 60070010 00000003 00000000 00000000
[<c02c47d8>] (__memzero) from [<c0506278>] (l2cap_skb_msg_name+0x1c/0x4c)
[<c0506278>] (l2cap_skb_msg_name) from [<c04d7114>] (bt_sock_recvmsg+0x128/0x160)
[<c04d7114>] (bt_sock_recvmsg) from [<c0504d50>] (l2cap_sock_recvmsg+0x98/0x134)
[<c0504d50>] (l2cap_sock_recvmsg) from [<c044e8a0>] (SyS_recvfrom+0x94/0xec)
[<c044e8a0>] (SyS_recvfrom) from [<c044e90c>] (SyS_recv+0x14/0x1c)
[<c044e90c>] (SyS_recv) from [<c0107700>] (ret_fast_syscall+0x0/0x3c)
Code: e3110010 18a0500c e49de004 e3110008 (18a0000c)
---[ end trace 224e35e79fe06b42 ]---

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16 17:23:57 +01:00
Marcel Holtmann
9e8305b39b Bluetooth: Use numbers for subsystem version string
Instead of keeping a version string around, use version and revision
numbers and then stringify them for use as module parameter.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19 20:19:34 +02:00
Marcel Holtmann
e64c97b53b Bluetooth: Add combined LED trigger for controller power
Instead of just having a LED trigger for power on a specific controller,
this adds the LED trigger "bluetooth-power" that combines the power
states of all controllers into a single trigger. This simplifies the
trigger selection and also supports multiple controllers per host
system via a single LED.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19 20:19:34 +02:00
Luiz Augusto von Dentz
90a56f72ed Bluetooth: Fix bt_sock_recvmsg when MSG_TRUNC is not set
Commit b5f34f9420 attempt to introduce
proper handling for MSG_TRUNC but recv and variants should still work
as read if no flag is passed, but because the code may set MSG_TRUNC to
msg->msg_flags that shall not be used as it may cause it to be behave as
if MSG_TRUNC is always, so instead of using it this changes the code to
use the flags parameter which shall contain the original flags.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-08-25 20:58:47 +02:00
Denis Kenzior
b5f34f9420 Bluetooth: Fix bt_sock_recvmsg return value
If recvmsg is called with a destination buffer that is too small to
receive the contents of skb in its entirety, the return value from
recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM
semantics.

If destination buffer provided by userspace is too small (e.g. len <
copied), then MSG_TRUNC flag is set and copied is returned.  Instead, it
should return the length of the message, which is consistent with how
other datagram based sockets act.  Quoting 'man recv':

"All  three calls return the length of the message on successful comple‐
tion.  If a message is too long to fit in the supplied  buffer,  excess
bytes  may  be discarded depending on the type of socket the message is
received from."

and

"MSG_TRUNC (since Linux 2.2)

    For   raw   (AF_PACKET),   Internet   datagram   (since    Linux
    2.4.27/2.6.8),  netlink  (since Linux 2.6.22), and UNIX datagram
    (since Linux 3.4) sockets: return the real length of the packet
    or datagram, even when it was longer than the passed buffer."

Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08 12:20:57 +02:00
Hannes Frederic Sowa
fafc4e1ea1 sock: tigthen lockdep checks for sock_owned_by_user
sock_owned_by_user should not be used without socket lock held. It seems
to be a common practice to check .owned before lock reclassification, so
provide a little help to abstract this check away.

Cc: linux-cifs@vger.kernel.org
Cc: linux-bluetooth@vger.kernel.org
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-13 22:37:20 -04:00
Geliang Tang
7eb7404f7e Bluetooth: use list_for_each_entry*
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-20 08:11:10 +01:00
Yichen Zhao
1a11ec89db Bluetooth: Fix locking in bt_accept_dequeue after disconnection
Fix a crash that may happen when bt_accept_dequeue is run after a
Bluetooth connection has been disconnected. bt_accept_unlink was called
after release_sock, permitting bt_accept_unlink to run twice on the same
socket and cause a NULL pointer dereference.

[50510.241632] BUG: unable to handle kernel NULL pointer dereference at 00000000000001a8
[50510.241694] IP: [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth]
[50510.241759] PGD 0
[50510.241776] Oops: 0002 [#1] SMP
[50510.241802] Modules linked in: rtl8192cu rtl_usb rtlwifi rtl8192c_common 8021q garp stp mrp llc rfcomm bnep nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp arc4 ath9k ath9k_common ath9k_hw ath kvm eeepc_wmi asus_wmi mac80211 snd_hda_codec_hdmi snd_hda_codec_realtek sparse_keymap crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_controller cfg80211 snd_hda_codec i915 snd_hwdep snd_pcm ghash_clmulni_intel snd_timer snd soundcore serio_raw cryptd drm_kms_helper drm i2c_algo_bit shpchp ath3k mei_me lpc_ich btusb bluetooth 6lowpan_iphc mei lp parport wmi video mac_hid psmouse ahci libahci r8169 mii
[50510.242279] CPU: 0 PID: 934 Comm: krfcommd Not tainted 3.16.0-49-generic #65~14.04.1-Ubuntu
[50510.242327] Hardware name: ASUSTeK Computer INC. VM40B/VM40B, BIOS 1501 12/09/2014
[50510.242370] task: ffff8800d9068a30 ti: ffff8800d7a54000 task.ti: ffff8800d7a54000
[50510.242413] RIP: 0010:[<ffffffffc01243f7>]  [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth]
[50510.242480] RSP: 0018:ffff8800d7a57d58  EFLAGS: 00010246
[50510.242511] RAX: 0000000000000000 RBX: ffff880119bb8c00 RCX: ffff880119bb8eb0
[50510.242552] RDX: ffff880119bb8eb0 RSI: 00000000fffffe01 RDI: ffff880119bb8c00
[50510.242592] RBP: ffff8800d7a57d60 R08: 0000000000000283 R09: 0000000000000001
[50510.242633] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800d8da9eb0
[50510.242673] R13: ffff8800d74fdb80 R14: ffff880119bb8c00 R15: ffff8800d8da9c00
[50510.242715] FS:  0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000
[50510.242761] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[50510.242794] CR2: 00000000000001a8 CR3: 0000000001c13000 CR4: 00000000001407f0
[50510.242835] Stack:
[50510.242849]  ffff880119bb8eb0 ffff8800d7a57da0 ffffffffc0124506 ffff8800d8da9eb0
[50510.242899]  ffff8800d8da9c00 ffff8800d9068a30 0000000000000000 ffff8800d74fdb80
[50510.242949]  ffff8800d6f85208 ffff8800d7a57e08 ffffffffc0159985 000000000000001f
[50510.242999] Call Trace:
[50510.243027]  [<ffffffffc0124506>] bt_accept_dequeue+0xb6/0x180 [bluetooth]
[50510.243085]  [<ffffffffc0159985>] l2cap_sock_accept+0x125/0x220 [bluetooth]
[50510.243128]  [<ffffffff810a1b30>] ? wake_up_state+0x20/0x20
[50510.243163]  [<ffffffff8164946e>] kernel_accept+0x4e/0xa0
[50510.243200]  [<ffffffffc05b97cd>] rfcomm_run+0x1ad/0x890 [rfcomm]
[50510.243238]  [<ffffffffc05b9620>] ? rfcomm_process_rx+0x8a0/0x8a0 [rfcomm]
[50510.243281]  [<ffffffff81091572>] kthread+0xd2/0xf0
[50510.243312]  [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0
[50510.243353]  [<ffffffff8176e9d8>] ret_from_fork+0x58/0x90
[50510.243387]  [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0
[50510.243424] Code: 00 48 8b 93 b8 02 00 00 48 8d 83 b0 02 00 00 48 89 51 08 48 89 0a 48 89 83 b0 02 00 00 48 89 83 b8 02 00 00 48 8b 83 c0 02 00 00 <66> 83 a8 a8 01 00 00 01 48 c7 83 c0 02 00 00 00 00 00 00 f0 ff
[50510.243685] RIP  [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth]
[50510.243737]  RSP <ffff8800d7a57d58>
[50510.243758] CR2: 00000000000001a8
[50510.249457] ---[ end trace bb984f932c4e3ab3 ]---

Signed-off-by: Yichen Zhao <zhaoyichen@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:51 +01:00
David S. Miller
f188b951f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/renesas/ravb_main.c
	kernel/bpf/syscall.c
	net/ipv4/ipmr.c

All three conflicts were cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 21:09:12 -05:00
Eric Dumazet
9cd3e072b0 net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
This patch is a cleanup to make following patch easier to
review.

Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()

To ease backports, we rename both constants.

Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:45:05 -05:00
Prasanna Karthik
f37590bd77 Bluetooth: clean up af_bluetooth code
Fix error reported by checkpatch.
ERROR:"foo* bar" should be "foo *bar"

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19 17:50:32 +01:00
Marcel Holtmann
dd31506d4a Bluetooth: Add support for sending system notes to monitor channel
The monitor channel can be used to send generic system notes as text
strings for debugging purposes. This adds the system note monitor code
and uses it for including kernel and subsystem version into traces.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19 17:50:28 +01:00
Marcel Holtmann
d94a61040d Bluetooth: Remove unneeded parenthesis around MSG_OOB
There are two checks that are still using (MSG_OOB) instead of just
MSG_OOB and so lets just fix them.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26 08:20:51 +02:00
Marcel Holtmann
13972adc32 Bluetooth: Increase minor version of core module
With the addition of support for diagnostic feature, it makes sense to
increase the minor version of the Bluetooth core module.

The module version is not used anywhere, but it gives a nice extra
hint for debugging purposes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-22 13:37:26 +03:00
Johan Hedberg
6d785aa345 Bluetooth: Convert mgmt to use HCI chan registration API
This patch converts the existing mgmt code to use the newly introduced
generic API for registering HCI channels with mgmt-like semantics.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-06 20:15:21 +01:00
Ying Xue
1b78414047 net: Remove iocb argument from sendmsg and recvmsg
After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 13:06:31 -05:00
Eyal Birger
b4772ef879 net: use common macro for assering skb->cb[] available size in protocol families
As part of an effort to move skb->dropcount to skb->cb[] use a common
macro in protocol families using skb->cb[] for ancillary data to
validate available room in skb->cb[].

Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 00:19:30 -05:00
Marcel Holtmann
ee485290c6 Bluetooth: Add support for self testing framework
This add support for the Bluetooth self testing framework that allows
running certain test cases of sample data to ensure correctness of its
basic functionality.

With this patch only the basic framework will be added. It contains
the build magic that allows running this at module loading time or
at late_initcall stage when built into the kernel image.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-12-30 08:53:55 +02:00
David S. Miller
b5f185f33d Merge tag 'master-2014-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
pull request: wireless-next 2014-12-08

Please pull this last batch of pending wireless updates for the 3.19 tree...

For the wireless bits, Johannes says:

"This time I have Felix's no-status rate control work, which will allow
drivers to work better with rate control even if they don't have perfect
status reporting. In addition to this, a small hwsim fix from Patrik,
one of the regulatory patches from Arik, and a number of cleanups and
fixes I did myself.

Of note is a patch where I disable CFG80211_WEXT so that compatibility
is no longer selectable - this is intended as a wake-up call for anyone
who's still using it, and is still easily worked around (it's a one-line
patch) before we fully remove the code as well in the future."

For the Bluetooth bits, Johan says:

"Here's one more bluetooth-next pull request for 3.19:

 - Minor cleanups for ieee802154 & mac802154
 - Fix for the kernel warning with !TASK_RUNNING reported by Kirill A.
   Shutemov
 - Support for another ath3k device
 - Fix for tracking link key based security level
 - Device tree bindings for btmrvl + a state update fix
 - Fix for wrong ACL flags on LE links"

And...

"In addition to the previous one this contains two more cleanups to
mac802154 as well as support for some new HCI features from the
Bluetooth 4.2 specification.

From the original request:

'Here's what should be the last bluetooth-next pull request for 3.19.
It's rather large but the majority of it is the Low Energy Secure
Connections feature that's part of the Bluetooth 4.2 specification. The
specification went public only this week so we couldn't publish the
corresponding code before that. The code itself can nevertheless be
considered fairly mature as it's been in development for over 6 months
and gone through several interoperability test events.

Besides LE SC the pull request contains an important fix for command
complete events for mgmt sockets which also fixes some leaks of hci_conn
objects when powering off or unplugging Bluetooth adapters.

A smaller feature that's part of the pull request is service discovery
support. This is like normal device discovery except that devices not
matching specific UUIDs or strong enough RSSI are filtered out.

Other changes that the pull request contains are firmware dump support
to the btmrvl driver, firmware download support for Broadcom BCM20702A0
variants, as well as some coding style cleanups in 6lowpan &
ieee802154/mac802154 code.'"

For the NFC bits, Samuel says:

"With this one we get:

- NFC digital improvements for DEP support: Chaining, NACK and ATN
  support added.

- NCI improvements: Support for p2p target, SE IO operand addition,
  SE operands extensions to support proprietary implementations, and
  a few fixes.

- NFC HCI improvements: OPEN_PIPE and NOTIFY_ALL_CLEARED support,
  and SE IO operand addition.

- A bunch of minor improvements and fixes for STMicro st21nfcb and
  st21nfca"

For the iwlwifi bits, Emmanuel says:

"Major works are CSA and TDLS. On top of that I have a new
firmware API for scan and a few rate control improvements.
Johannes find a few tricks to improve our CPU utilization
and adds support for a new spin of 7265 called 7265D.
Along with this a few random things that don't stand out."

And...

"I deprecate here -8.ucode since -9 has been published long ago.
Along with that I have a new activity, we have now better
a infrastructure for firmware debugging. This will allow to
have configurable probes insides the firmware.
Luca continues his work on NetDetect, this feature is now
complete. All the rest is minor fixes here and there."

For the Atheros bits, Kalle says:

"Only ath10k changes this time and no major changes. Most visible are:

o new debugfs interface for runtime firmware debugging (Yanbo)

o fix shared WEP (Sujith)

o don't rebuild whenever kernel version changes (Johannes)

o lots of refactoring to make it easier to add new hw support (Michal)

There's also smaller fixes and improvements with no point of listing
here."

In addition, there are a few last minute updates to ath5k,
ath9k, brcmfmac, brcmsmac, mwifiex, rt2x00, rtlwifi, and wil6210.
Also included is a pull of the wireless tree to pick-up the fixes
originally included in "pull request: wireless 2014-12-03"...

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09 18:12:03 -05:00
Marcel Holtmann
8ab9731d8c Bluetooth: Increase minor version of core module
With the addition of support for Bluetooth Low Energy Secure Connections
feature, it makes sense to increase the minor version of the Bluetooth
core module.

The module version is not used anywhere, but it gives a nice extra
hint for debugging purposes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-12-03 21:58:25 +02:00
David S. Miller
51f3d02b98 net: Add and use skb_copy_datagram_msg() helper.
This encapsulates all of the skb_copy_datagram_iovec() callers
with call argument signature "skb, offset, msghdr->msg_iov, length".

When we move to iov_iters in the networking, the iov_iter object will
sit in the msghdr.

Having a helper like this means there will be less places to touch
during that transformation.

Based upon descriptions and patch from Al Viro.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 16:46:40 -05:00
Marcel Holtmann
7cb9d20fd9 Bluetooth: Add BUILD_BUG_ON check for SKB control buffer size
The struct bt_skb_cb size needs to stay within the limits of skb->cb
at all times and to ensure that add a BUILD_BUG_ON to check for it at
compile time.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-09-15 07:15:41 +03:00
Fabian Frederick
26b0f4e2f9 Bluetooth: constify seq_operations
bt_seq_ops is only used with __seq_open_private as
const struct seq_operations *

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-03 17:42:52 +02:00
Marcel Holtmann
a747439957 Bluetooth: Increase minor version of core module
With the addition of Resolvable Private Address (RPA) resolution
support for Bluetooth Low Energy connections, it makes sense to
increase the minor version of the Bluetooth core module.

The module version is not used anywhere, but it gives a nice extra
hint for debugging purposes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-02-21 06:21:55 +02:00
Marcel Holtmann
c6d1649050 Bluetooth: Increase minor version of core module
With the addition of L2CAP Connection Oriented Channels for Bluetooth
Low Energy connections, it makes sense to increase the minor version
of the Bluetooth core module.

The module version is not used anywhere, but it gives a nice extra
hint for debugging purposes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-12-07 21:29:43 +04:00
Hannes Frederic Sowa
f3d3342602 net: rework recvmsg handler msg_name and msg_namelen logic
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller <davem@davemloft.net>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20 21:52:30 -05:00
Marcel Holtmann
ffcecac6a7 Bluetooth: Create root debugfs directory during module init
Create the root Bluetooth debugfs directory during module init
and remove it on module exit.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:46:27 +03:00
Marcel Holtmann
c560575576 Bluetooth: Adjust header for proc socket information
The exposed socket information do not contain source or destination
addresses. So adjust the header accordingly.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-14 14:20:50 +03:00
Marcel Holtmann
dcbc729eef Bluetooth: Increase minor version of core module
There have been a lot of changes in the core Bluetooth handling
lately. So it is a good idea to increase the module version.

The module version is not used anywhere, but it makes debugging
a little bit simpler if versions can be distinguished.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13 23:35:35 +03:00
Marcel Holtmann
d97636980f Bluetooth: Add support for per socket msg_name callback
This allows to add a per socket msg_name callback that can be used
for updating the msg_name information for recvmsg() system calls.

This feature is used by another patch to support address information
on L2CAP connectionless channels.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13 23:10:33 +03:00
Marcel Holtmann
5f6cd79f47 Bluetooth: Remove src and dst fields from bt_sock structure
Every socket protocol now stores its own address information. So
just remove the generic src and dst fields since they are no longer
needed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13 21:11:25 +03:00
Johan Hedberg
0fba96f97b Bluetooth: Add clarifying comment to bt_sock_wait_state()
The bt_sock_wait_state requires the sk lock to be held (through
lock_sock) so document it clearly in the code.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-25 14:30:10 -03:00
Johan Hedberg
e793dcf082 Bluetooth: Fix waiting for clearing of BT_SK_SUSPEND flag
In the case of blocking sockets we should not proceed with sendmsg() if
the socket has the BT_SK_SUSPEND flag set. So far the code was only
ensuring that POLLOUT doesn't get set for non-blocking sockets using
poll() but there was no code in place to ensure that blocking sockets do
the right thing when writing to them.

This patch adds a new bt_sock_wait_ready helper function to sleep in the
sendmsg call if the BT_SK_SUSPEND flag is set, and wake up as soon as it
is unset. It also updates the L2CAP and RFCOMM sendmsg callbacks to take
advantage of this new helper function.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-18 17:02:59 -05:00