[ Upstream commit e198be37e52551bb863d07d2edc535d0932a3c4f ]
Some BT.656 sensors (e.g. ADV718x) transmit frames with unstable BT.656
sync codes after initial power on. This confuses the imx CSI,resulting
in vertical and/or horizontal sync issues. Skip the first 20 frames
to avoid the unstable sync codes.
[fabio: fixed checkpatch warning and increased the frame skipping to 20]
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ISI core driver depend on soc version info but driver provided the info
is not ready when ISI core driver probe, so return -EPROBE_DEFER replaced
with -EINVAL.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
[ Upstream commit 8938c48fa25b491842ece9eb38f0bea0fcbaca44 ]
If omap4iss_get() failed, it need return error code in iss_probe().
Fixes: 59f0ad8076 ("[media] v4l: omap4iss: Add support for OMAP4...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dccfe2548746ca9cca3a20401ece4cf255d1f171 upstream.
Do not modify imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp, until the
format has been correctly validated.
Otherwise, even if we use a backup variable, there is a period of time
where imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp might have an invalid
value that can be used by other functions.
Cc: stable@vger.kernel.org
Fixes: ad91849996f9 ("media: staging/intel-ipu3: Fix set_fmt error handling")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad91849996f9dd79741a961fd03585a683b08356 upstream.
If there in an error during a set_fmt, do not overwrite the previous
sizes with the invalid config.
Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and
causing the following OOPs
[ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes)
[ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0
[ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP
Cc: stable@vger.kernel.org
Fixes: 6d5f26f2e0 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3630901933afba1d16c462b04d569b7576339223 upstream.
We are losing the reference to an allocated memory if try. Change the
order of the check to avoid that.
Cc: stable@vger.kernel.org
Fixes: 6d5f26f2e0 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc271b6754691af74d710b761eaf027e3743e243 ]
The correct return code to report an invalid pipeline configuration is
-EPIPE. Return it instead of -EINVAL from __capture_legacy_try_fmt()
when the capture format doesn't match the media bus format of the
connected subdev.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coverity Issue: 10436670, 10893372, 10436673, fix string overflow issue.
The length of v4l2_capability structure driver member is 16, but the length
of "csi_samsung_subdev" is 18, when assign it to driver member, it will
occur string overflow issue.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit b4ffa85521e12cf02fb22e955331c0b1355ee219)
(cherry picked from commit 0ff86d26f925534530f0d741c54f9ddfdeadd10b)
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
[ Upstream commit 89b14485caa4b7b2eaf70be0064f0978e68ebeee ]
The csc/scaler device private struct is released by
ipu_csc_scaler_video_device_release(), which can be called
by video_unregister_device() if there are no users
of the underlying struct video device.
Therefore, the mutex can't be held when calling
video_unregister_device() as its memory may be freed
by it, leading to a kernel oops.
Fortunately, the fix is quite simple as no locking
is needed when calling video_unregister_device(): v4l2-core
already has its own internal locking, and the structures
are also properly refcounted.
Fixes: a8ef0488cc ("media: imx: add csc/scaler mem2mem device")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb2216548a2b13cf2942a058b475438a7a6bb028 ]
The csc/scaler device pointer (imxmd->m2m_vdev) is assigned
after the imx media device v4l2-async probe completes,
therefore we need to check if the device is non-NULL
before trying to unregister it.
This can be the case if the non-completed imx media device
is unbinded (or the driver is removed), leading to a kernel oops.
Fixes: a8ef0488cc ("media: imx: add csc/scaler mem2mem device")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fZ3T
-----END PGP SIGNATURE-----
Merge tag 'v5.4.73' into 5.4-2.3.x-imx
This is the 5.4.73 stable release
Conflicts:
- arch/arm/boot/dts/imx6sl.dtsi:
Commit [a1767c9019] in NXP tree is now covered with commit [5c4c2f437c]
from upstream.
- drivers/gpu/drm/mxsfb/mxsfb_drv.c:
Resolve merge hunk for patch [ed8b90d303] from upstream
- drivers/media/i2c/ov5640.c:
Patch [aa4bb8b883] in NXP tree is now covered by patches [79ec0578c7]
and [b2f8546056] from upstream. Changes from NXP patch [99aa4c8c18] are
covered in upstream version as well.
- drivers/net/ethernet/freescale/fec_main.c:
Fix merge fuzz for patch [9e70485b40] from upstream.
- drivers/usb/cdns3/gadget.c:
Keep NXP version of the file, upstream version is not compatible.
- drivers/usb/dwc3/core.c:
- drivers/usb/dwc3/core.h:
Fix merge fuzz of patch [08045050c6] together wth NXP patch [b30e41dc1e]
- sound/soc/fsl/fsl_sai.c:
- sound/soc/fsl/fsl_sai.h:
Commit [2ea70e51eb72a] in NXP tree is now covered with commit [1ad7f52fe6]
from upstream.
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
subdev_notifier_complete will be called multi times in some cases
due to workaround to support hotplugin-like mechanism, so add checking
media device register status before register new media device.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
There is no RGBA format in V4L2 framework when develop ISI mem2mem
driver, so we add V4L2_PIX_FMT_RGBA in V4L2 framework. But in the
latest kernel version, V4L2 framework add V4L2_PIX_FMT_RGBA32 for
RGBA format, so change use RGBA format define in latest framework.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Remove 4K feature for ISI channel1 due to ISI line buffer limitation
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Add workaround for iMX865 ISI to support 4K because for the ISI line
buffer management, the other chips used a single clock for all the
memories, where as in iMX865, each channel has the corresponding clock
which is used, so need to enable channel1 clock when channel0 chain
buffer enabled.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Using spin_lock_irqsave instead of spin_lock to disable interrupt
when in irq handler to avoid potential race issue.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Using list_del_init instead of list_del to remove list entry from list
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Remove redundant code for clean out pending and active list
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
CHAIN_BUF occupy CHNL_CTRL[25:26], so the mask value should be 0x6000000.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
[ Upstream commit 08913a8e458e03f886a1a1154a6501fcb9344c39 ]
The intent here is to reset the whole 'scaler_coeffs_luma' array, not just
the first element.
Fixes: e11110a5b7 ("media: staging/intel-ipu3: css: Compute and program ccs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* tag 'v5.4.70': (3051 commits)
Linux 5.4.70
netfilter: ctnetlink: add a range check for l3/l4 protonum
ep_create_wakeup_source(): dentry name can change under you...
...
Conflicts:
arch/arm/mach-imx/pm-imx6.c
arch/arm64/boot/dts/freescale/imx8mm-evk.dts
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
drivers/crypto/caam/caamalg.c
drivers/gpu/drm/imx/dw_hdmi-imx.c
drivers/gpu/drm/imx/imx-ldb.c
drivers/gpu/drm/imx/ipuv3/ipuv3-crtc.c
drivers/mmc/host/sdhci-esdhc-imx.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
drivers/net/ethernet/freescale/enetc/enetc.c
drivers/net/ethernet/freescale/enetc/enetc_pf.c
drivers/thermal/imx_thermal.c
drivers/usb/cdns3/ep0.c
drivers/xen/swiotlb-xen.c
sound/soc/fsl/fsl_esai.c
sound/soc/fsl/fsl_sai.c
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
[ Upstream commit ef0ed05dcef8a74178a8b480cce23a377b1de2b8 ]
There was supposed to be a "ret = " assignment here, otherwise the
error handling on the next line won't work.
Fixes: 64b5a49df4 ("[media] media: imx: Add Capture Device Interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b30063976f29fc221a99d18d37d22ca035068aa9 ]
The check for a required control in the request was missing a call to
v4l2_ctrl_request_hdl_put() in the error path. Fix it.
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Return directly for independent entity because it hasn't any links
with other entity, so needn't to do clean operation.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit 039d27179737734f9ffb6ef5badbdd35aac83ce2)
Fix pyeiq can't detect camera device when build imx8-media-dev.c as
modules. Video device will be registered before entities link setup
and it will send an event to userspace once video device created.
Userspace will try to open the video device but entities links are
still not established due to driver need to wait all subdev register,
so driver will return -ENODEV, it leads to pyeiq fail. The patch add
checking for entities link when userspace try to open video device and
will return directly when links are not ready.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit de136a4752ea34ddea7143c7c5bec7c1ce1f12d4)
Return error when no command support
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit f59b06a40cd1aeb7948e3fd0b907296b686f9e12)
For iMX8MP platform, csi driver need to get gpr to set isp_dewarp control
in mediamix_gpr registers, but for iMX8MN platform, there is no isp dewarp
module, driver don't need to get gpr property in driver. So only print error
message when there is no gpr property instead of return error.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit 6bd941f789d258d8146c257ff3ff4bbfb7aab416)
Skip v4l2 register subdev for isi, the second csi and ov5640 sensor
because currently, isp_media_server can't handle multi camera case,
if there are other /dev/v4l-subdev, isp_media_server can't handle.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Reuse samsung csi driver for isp of iMX8MP platform. CSI driver
are shared by ISI and ISP.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
In order to decouple ISI core, capture and mem2mem driver, need to config
imx8-isi-hw.c as a separate driver and build as tristate
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
mxc_isi_get_hostdata() and mxc_isi_dev_get_parent() are defined in isi
core driver and they will be used capture and mem2mem driver, so moving
them from core driver to isi hardware driver will be better.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
mxc_isi_m2m_frame_write_done is called in imx8-isi-core.c driver.
if build the driver as modules, mem2mem driver need to export the
function.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
mxc_isi_cap_frame_write_done is called in imx8-isi-core.c driver,
if build the driver as modules, capture driver need to export the
function.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Because ISI hardware is shared by capture and mem2mem driver. Their
functions depended on methods in imx8-isi-hw.c to do register read/
write operation. When build capture and mem2mem driver as modules,we
need to export methods in imx8-isi-hw.c file.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
We create a virtual capture device under isi device and isi driver will
populate platform device for the virtual device, but missed depopulate
operation when parent(isi) driver removed.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Because iMX8QXP/QM parallel interface for camera rely on multi power
domain resources, so driver will attach the related power domain when
driver probe and missed detach operation when driver removed.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Because MIPI CSI for iMX8QXP/QM rely on multi power domain resources
(CSI0, ISI0), so driver will attach the related power domain when
driver probe but missed detach operation when driver removed.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>