Commit Graph

55 Commits

Author SHA1 Message Date
Linus Torvalds 1f7563f743 SCSI sg on 20190709
This topic branch covers a fundamental change in how our sg lists are
 allocated to make mq more efficient by reducing the size of the
 preallocated sg list.  This necessitates a large number of driver
 changes because the previous guarantee that if a driver specified
 SG_ALL as the size of its scatter list, it would get a non-chained
 list and didn't need to bother with scatterlist iterators is now
 broken and every driver *must* use scatterlist iterators.
 
 This was broken out as a separate topic because we need to convert all
 the drivers before pulling the trigger and unconverted drivers kept
 being found, necessitating a rebase.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTzzCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZB+AP9I8j/s
 wWfg0Z3WNuf4D5I3rH4x1J3cQTqPJed+RjwgcQEA1gZvtOTg1ZEn/CYMVnaB92x0
 t6MZSchIaFXeqfD+E7U=
 =cv8o
 -----END PGP SIGNATURE-----

Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI scatter-gather list updates from James Bottomley:
 "This topic branch covers a fundamental change in how our sg lists are
  allocated to make mq more efficient by reducing the size of the
  preallocated sg list.

  This necessitates a large number of driver changes because the
  previous guarantee that if a driver specified SG_ALL as the size of
  its scatter list, it would get a non-chained list and didn't need to
  bother with scatterlist iterators is now broken and every driver
  *must* use scatterlist iterators.

  This was broken out as a separate topic because we need to convert all
  the drivers before pulling the trigger and unconverted drivers kept
  being found, necessitating a rebase"

* tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
  scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN
  scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation
  scsi: core: avoid preallocating big SGL for data
  scsi: core: avoid preallocating big SGL for protection information
  scsi: lib/sg_pool.c: improve APIs for allocating sg pool
  scsi: esp: use sg helper to iterate over scatterlist
  scsi: NCR5380: use sg helper to iterate over scatterlist
  scsi: wd33c93: use sg helper to iterate over scatterlist
  scsi: ppa: use sg helper to iterate over scatterlist
  scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist
  scsi: imm: use sg helper to iterate over scatterlist
  scsi: aha152x: use sg helper to iterate over scatterlist
  scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist
  scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist
  scsi: usb: image: microtek: use sg helper to iterate over scatterlist
  scsi: pmcraid: use sg helper to iterate over scatterlist
  scsi: ipr: use sg helper to iterate over scatterlist
  scsi: mvumi: use sg helper to iterate over scatterlist
  scsi: lpfc: use sg helper to iterate over scatterlist
  scsi: advansys: use sg helper to iterate over scatterlist
  ...
2019-07-11 15:17:41 -07:00
Ming Lei ee5a1dbfec scsi: esp: use sg helper to iterate over scatterlist
Unlike the legacy I/O path, scsi-mq preallocates a large array to hold
the scatterlist for each request. This static allocation can consume
substantial amounts of memory on modern controllers which support a
large number of concurrently outstanding requests.

To facilitate a switch to a smaller static allocation combined with a
dynamic allocation for requests that need it, we need to make sure all
SCSI drivers handle chained scatterlists correctly.

Convert remaining drivers that directly dereference the scatterlist
array to using the iterator functions.

[mkp: clarified commit message]

Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20 15:21:33 -04:00
Thomas Gleixner 09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Sakari Ailus d75f773c86 treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-09 14:19:06 +02:00
Christoph Hellwig 2a3d4eb8e2 scsi: flip the default on use_clustering
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page.  Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18 23:13:12 -05:00
Finn Thain 8c6f803fd6 scsi: esp_scsi: Optimize PIO loops
Avoid function calls in the inner PIO loops. On a Centris 660av this
improves throughput for sequential read transfers by about 40% and
sequential write by about 10%.

Unfortunately it is not possible to have methods like .esp_write8 placed
inline so this is always going to be slow, even with LTO.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:38:29 -04:00
Finn Thain 53dce332db scsi: esp_scsi: De-duplicate PIO routines
As a temporary measure, the code to implement PIO transfers was
duplicated in zorro_esp and mac_esp. Now that it has stabilized move the
common code into the core driver but don't build it unless needed.

This replaces the inline assembler with more portable writesb() calls.
Optimizing the m68k writesb() implementation is a separate patch.

[mkp: applied by hand]

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:38:20 -04:00
Finn Thain 8bca214333 scsi: esp_scsi: Eliminate ESP_FLAG_DOING_SLOWCMD
The concept of a 'slow command' as it appears in esp_scsi is confusing
because it could refer to an ESP command or a SCSI command. It turns out
that it refers to a particular ESP select command which the driver also
tracks as 'ESP_SELECT_MSGOUT'. For readability, it is better to use the
terminology from the datasheets.

The global ESP_FLAG_DOING_SLOWCMD flag is redundant anyway, as it can be
inferred from esp->select_state. Remove the ESP_FLAG_DOING_SLOWCMD cruft
and just use a boolean local variable.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:37:31 -04:00
Finn Thain 87c58ef5a5 scsi: esp_scsi: Grant disconnect privilege for untagged commands
A SCSI device is not granted disconnect privilege by an esp_scsi host
unless that device has its simple_tags flag set. However, a device may
support disconnect/reselect and not support command queueing. Allow such
devices to disconnect and thereby improve bus utilization.

Drop the redundant 'lp' check. The mid-layer invokes .slave_alloc and
.slave_destroy in such a way that we may rely on scmd->device->hostdata
for as long as scmd belongs to the low-level driver.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:37:26 -04:00
Finn Thain fd47d919d0 scsi: esp_scsi: Track residual for PIO transfers
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:

scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]

The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.

The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.

Fixes: 6fe07aaffb ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:34:20 -04:00
Christoph Hellwig 86117d7f95 scsi: esp_scsi: remove union in esp_cmd_priv
The dma_addr_t member is unused ever since we switched the SCSI
layer to send down single-segement command using a scatterlist
as well many years ago.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15 23:00:39 -04:00
Christoph Hellwig 3f9295b65e scsi: esp_scsi: move dma mapping into the core code
Except for the mac_esp driver, which uses PIO or pseudo DMA, all drivers
share the same dma mapping calls.  Move the dma mapping into the core
code using the scsi_dma_map / scsi_dma_unmap helpers, with a special
identify mapping variant triggered off a new ESP_FLAG_NO_DMA_MAP flag
for mac_esp.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15 23:00:38 -04:00
Christoph Hellwig 44b1b4d24b scsi: esp_scsi: remove the dev argument to scsi_esp_register
We can simplify use esp->dev now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-15 23:00:38 -04:00
Finn Thain d60e9eec95 scsi: esp_scsi: Always clear msg_out_len after MESSAGE OUT phase
After sending a message, always clear esp->msg_out_len. Otherwise,
eh_abort_handler may subsequently fail to send an ABORT TASK SET
message.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10 19:55:35 -04:00
Finn Thain c69edff5c5 scsi: esp_scsi: Avoid sending ABORT TASK SET messages
If an LLD aborts a task set, it should complete the affected commands
with the appropriate result code. In a couple of cases esp_scsi doesn't
do so.

When the initiator receives an unhandled message, just respond by sending
a MESSAGE REJECT instead of ABORT TASK SET, and thus avoid the issue.

OTOH, a MESSAGE REJECT sent by a target can be taken as an indication
that the initiator messed up somehow. It isn't always possible to abort
correctly, so just fall back on a SCSI bus reset, which will complete the
affected commands with the appropriate result code.

For example, certain Apple (Sony) CD-ROM drives, when the non-existent
LUN 1 is scanned, can't handle the INQUIRY command. The problem is not
detected until the initiator gets a MESSAGE REJECT. Whenever esp_scsi
sees that message, it raises ATN and sends ABORT TASK SET -- but
neglects to complete the failed scmd.

The target then goes into DATA OUT phase (probably bogus), while the ESP
device goes into disconnected mode (surprising, given the bus phase).
The next Transfer Information command from esp_scsi then causes
an Invalid Command interrupt because that command is not valid when in
disconnected mode:

mac_esp: using PDMA for controller 0
mac_esp mac_esp.0: esp0: regs[50f10000:(null)] irq[19]
mac_esp mac_esp.0: esp0: is a ESP236, 16 MHz (ccf=4), SCSI ID 7
scsi host0: esp
scsi 0:0:0:0: Direct-Access     SEAGATE  ST318416N        0010 PQ: 0 ANSI: 3
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: asynchronous
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
scsi 0:0:3:0: CD-ROM            SONY     CD-ROM CDU-8003A 1.9a PQ: 0 ANSI: 2 CCS
scsi target0:0:3: Beginning Domain Validation
scsi target0:0:3: FAST-5 SCSI 2.0 MB/s ST (500 ns, offset 15)
scsi target0:0:3: Domain Validation skipping write tests
scsi target0:0:3: Ending Domain Validation
scsi host0: unexpected IREG 40
scsi host0: Dumping command log
scsi host0: ent[2] CMD val[c2] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[01] event[0c]
scsi host0: ent[3] CMD val[00] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[4] EVENT val[0d] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[5] EVENT val[03] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[0d]
scsi host0: ent[6] CMD val[90] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[03]
scsi host0: ent[7] EVENT val[05] sreg[91] seqreg[04] sreg2[00] ireg[18] ss[00] event[03]
scsi host0: ent[8] EVENT val[0d] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[05]
scsi host0: ent[9] CMD val[01] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[10] CMD val[11] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[11] EVENT val[0b] sreg[93] seqreg[cc] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[12] CMD val[12] sreg[97] seqreg[cc] sreg2[00] ireg[08] ss[00] event[0b]
scsi host0: ent[13] EVENT val[0c] sreg[97] seqreg[cc] sreg2[00] ireg[08] ss[00] event[0b]
scsi host0: ent[14] CMD val[44] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[00] event[0c]
scsi host0: ent[15] CMD val[01] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[01] event[0c]
scsi host0: ent[16] CMD val[c2] sreg[90] seqreg[cc] sreg2[00] ireg[20] ss[01] event[0c]
scsi host0: ent[17] CMD val[00] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[18] EVENT val[0d] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[0c]
scsi host0: ent[19] EVENT val[06] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[0d]
scsi host0: ent[20] CMD val[01] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[06]
scsi host0: ent[21] CMD val[10] sreg[87] seqreg[02] sreg2[00] ireg[18] ss[00] event[06]
scsi host0: ent[22] CMD val[1a] sreg[87] seqreg[ca] sreg2[00] ireg[08] ss[00] event[06]
scsi host0: ent[23] CMD val[12] sreg[87] seqreg[ca] sreg2[00] ireg[08] ss[00] event[06]
scsi host0: ent[24] EVENT val[0d] sreg[87] seqreg[ca] sreg2[00] ireg[08] ss[00] event[06]
scsi host0: ent[25] EVENT val[09] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[0d]
scsi host0: ent[26] CMD val[01] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[09]
scsi host0: ent[27] CMD val[10] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[09]
scsi host0: ent[28] EVENT val[0a] sreg[86] seqreg[ca] sreg2[00] ireg[10] ss[00] event[09]
scsi host0: ent[29] EVENT val[0d] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[0a]
scsi host0: ent[30] EVENT val[04] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[0d]
scsi host0: ent[31] CMD val[01] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[04]
scsi host0: ent[0] CMD val[90] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[04]
scsi host0: ent[1] EVENT val[05] sreg[80] seqreg[ca] sreg2[00] ireg[20] ss[00] event[04]
scsi target0:0:3: FAST-5 SCSI 2.0 MB/s ST (500 ns, offset 15)
scsi target0:0:0: asynchronous
sr 0:0:3:0: [sr0] scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:3:0: Attached scsi generic sg1 type 5

This patch resolves this issue because the bus reset causes the INQUIRY
command to fail earlier, and return the appropriate result code.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10 19:55:35 -04:00
Finn Thain 201c37d7bf scsi: esp_scsi: Clean up control flow and dead code
This patch improves readability. There are no functional changes.

Since this touches on a questionable ESP_INTR_DC conditional, add some
commentary to help others who may (as I did) find themselves chasing an
"Invalid Command" error after the device flags this condition.

This cleanup also eliminates a warning from "make W=1":
drivers/scsi/esp_scsi.c: In function 'esp_finish_select':
drivers/scsi/esp_scsi.c:1233:5: warning: variable 'orig_select_state' set but not used [-Wunused-but-set-variable]
  u8 orig_select_state;

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10 19:55:34 -04:00
Christoph Hellwig 64d513ac31 scsi: use host wide tags by default
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09 17:11:57 -08:00
Hannes Reinecke 37c0b105ae esp_scsi: remove check for ESP_MAX_TAGS
'num_tags' is an unsigned char, so the check for 'ESP_MAX_TAGS'
(which is set to 256) is pointless.

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09 15:44:23 +01:00
Hannes Reinecke e858d930fe esp_scsi: enable CONFIG2_FENAB for am53c974
CONFIG2_FENAB ('feature enable') changed definition between chip
revisions, from 'Latch SCSI Phase' to 'Latch SCSI Phase, display
chip ID upon reset, and enable 24 bit addresses'.
So only enable it for am53c974 where we know what it's doing.

Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:13:17 +01:00
Paolo Bonzini 8a9aeb45d0 esp_scsi: let DMA driver provide a config2 value
On PCscsi, the FENAB configuration also enables 24-bit DMA
transfer lengths (and provides the chip id in TCHI after reset).
We want to be able to enable this parameter from the DMA driver.

Check if the caller of scsi_esp_register provided a value for esp->config2.
If this is the case, assume this is not an ESP100, skip the detection
phase and leave esp->config2 untouched.  It will be used in esp_reset_esp.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:13:17 +01:00
Hannes Reinecke eeea2f9c2f esp_scsi: correctly detect am53c974
The am53c974 returns the same ID as the FAS236, but implements
things slightly differently. So detect the am53c974 by checking
for ESP_CONFIG4 register.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:13:16 +01:00
Hannes Reinecke 6df388f2d5 am53c974: BLAST residual handling
The am53c974 has an design issue where a single byte might be
left in the SCSI FIFO after a DMA transfer.
As the handling code is currently untested add a WARN_ON()
statement here.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:13:15 +01:00
Hannes Reinecke 3170866f88 esp_scsi: use FIFO for command submission
Using DMA for command submission has the drawback that it might
generate additional DMA completion interrupts after the command
has been submitted to the device.
Additionally the am53c974 has a design flaw causing it
to generate spurious interrupts even though DMA completion
interrupts are not enabled.
This can be avoided by using the FIFO for command submission.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:10:24 +01:00
Hannes Reinecke 9535fff3c5 esp_scsi: read status registers
A read to ESP_INTRPT will clear ESP_STATUS and ESP_SSTEP. So read
all status registers in one go to avoid losing information.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:10:24 +01:00
Hannes Reinecke 1af6f60368 esp_scsi: debug event and command
Add new debug definitions for event and command logging.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:10:23 +01:00
Hannes Reinecke a1a75b35fc esp_scsi: convert to dev_printk
Use dev_printk functions for correct device annotations.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:10:23 +01:00
Hannes Reinecke 3707a186c8 esp_scsi: make number of tags configurable
Add a field 'num_tags' to the esp structure to allow drivers
to overwrite the number of avialable tags if required.
Default is ESP_DEFAULT_TAGS.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 16:10:23 +01:00
Christoph Hellwig db5ed4dfd5 scsi: drop reason argument from ->change_queue_depth
Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24 14:45:27 +01:00
Christoph Hellwig c8b09f6fb6 scsi: don't set tagging state from scsi_adjust_queue_depth
Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth.  For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway.  The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12 11:19:43 +01:00
Christoph Hellwig 2ecb204d07 scsi: always assign block layer tags if enabled
Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq.  This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:43 +01:00
Christoph Hellwig 5066863337 scsi: remove abuses of scsi_populate_tag
Unless we want to build a SPI tag message we should just check SCMD_TAGGED
instead of reverse engineering a tag type through the use of
scsi_populate_tag_msg.

Also rename the function to spi_populate_tag_msg, make it behave like the
other spi message helpers, and move it to the spi transport class.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:41 +01:00
David S. Miller 21af8107f2 esp_scsi: Fix tag state corruption when autosensing.
Meelis Roos reports a crash in esp_free_lun_tag() in the presense
of a disk which has died.

The issue is that when we issue an autosense command, we do so by
hijacking the original command that caused the check-condition.

When we do so we clear out the ent->tag[] array when we issue it via
find_and_prep_issuable_command().  This is so that the autosense
command is forced to be issued non-tagged.

That is problematic, because it is the value of ent->tag[] which
determines whether we issued the original scsi command as tagged
vs. non-tagged (see esp_alloc_lun_tag()).

And that, in turn, is what trips up the sanity checks in
esp_free_lun_tag().  That function needs the original ->tag[] values
in order to free up the tag slot properly.

Fix this by remembering the original command's tag values, and
having esp_alloc_lun_tag() and esp_free_lun_tag() use them.

Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 18:08:34 -07:00
Joe Perches 2975b02316 scsi: Use vsprintf extention %pf with builtin_return_address
Emit the function name not the address when possible.

builtin_return_address() gives an address.  When building
a kernel with CONFIG_KALLSYMS, emit the actual function
name not the address.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-05 17:09:40 -07:00
Linus Torvalds 57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Justin P. Mattock 70f23fd66b treewide: fix a few typos in comments
- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-10 10:16:21 +02:00
Kirill A. Shutemov 63ce249994 [SCSI] esp, scsi_tgt_lib, fcoe: use list_move() instead of list_del()/list_add() combination
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01 10:20:10 -05:00
Jeff Garzik f281233d3e SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 13:33:23 -08:00
Finn Thain 02507a80b3 [SCSI] mac_esp: fix PIO mode, take 2
The mac_esp PIO algorithm no longer works in 2.6.31 and crashes my Centris
660av. So here's a better one.

Also, force async with esp_set_offset() rather than esp_slave_configure().

One of the SCSI drives I tested still doesn't like the PIO mode and fails
with "esp: esp0: Reconnect IRQ2 timeout" (the same drive works fine in
PDMA mode).

This failure happens when esp_reconnect_with_tag() tries to read in two
tag bytes but the chip only provides one (0x20). I don't know what causes
this. I decided not to waste any more time trying to fix it because the
best solution is to rip out the PIO mode altogether and use the DMA
engine.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:10 -06:00
Julia Lawall 237abac6ff [SCSI] esp_scsi: Use DIV_ROUND_UP
Use the macro DIV_ROUND_UP and eliminate the variable rounded_up, as
suggested by Matthew Wilcox.

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: David Miller <davem@davemloft.net>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:14 -06:00
Linus Torvalds 89a93f2f48 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits)
  [SCSI] scsi_dh: fix kconfig related build errors
  [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of
  [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h
  [SCSI] make struct scsi_{host,target}_type static
  [SCSI] fix locking in host use of blk_plug_device()
  [SCSI] zfcp: Cleanup external header file
  [SCSI] zfcp: Cleanup code in zfcp_erp.c
  [SCSI] zfcp: zfcp_fsf cleanup.
  [SCSI] zfcp: consolidate sysfs things into one file.
  [SCSI] zfcp: Cleanup of code in zfcp_aux.c
  [SCSI] zfcp: Cleanup of code in zfcp_scsi.c
  [SCSI] zfcp: Move status accessors from zfcp to SCSI include file.
  [SCSI] zfcp: Small QDIO cleanups
  [SCSI] zfcp: Adapter reopen for large number of unsolicited status
  [SCSI] zfcp: Fix error checking for ELS ADISC requests
  [SCSI] zfcp: wait until adapter is finished with ERP during auto-port
  [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver
  [SCSI] sg: Add target reset support
  [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC
  [SCSI] sd: Move scsi_disk() accessor function to sd.h
  ...
2008-07-15 18:58:04 -07:00
David S. Miller a793804f25 [SCSI] esp: Correct chip ID probing sequence.
The features enable bit has to be set in the config2 register
before we can be absolutely sure we will probe a correct
part unique ID and family code from the transfer-count-high
register.

Also, reload the CFACT, STP, SOFF, and TIMEO near the end of
esp_reset_esp().

From a patch by Maciej W. Rozycki.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:30 -05:00
James Bottomley ec5e69f6d3 [SCSI] esp: tidy up target reference counting
The esp driver currently does hand rolled reference counting of its
target.  It's much easier to do what it needs to do if it's plugged into
the mid-layer callbacks (target_alloc and target_destroy) which were
designed for this case, so do it this way and get rid of the internal
target reference count.

Acked-by: David S. Miller <davem@davemloft.net>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-25 12:36:13 -05:00
David S. Miller eadc49b1a8 [SCSI] esp: Fix OOPS in esp_reset_cleanup().
OOPS reported by Friedrich Oslage <bluebird@porno-bullen.de>

The problem here is that tp->starget is set every time a lun
is allocated for a particular target so we can catch the
sdev_target parent value.

The reset handler uses the NULL'ness of this value to determine
which targets are active.

But esp_slave_destroy() does not NULL out this value when appropriate.

So for every target that doesn't respond, the SCSI bus scan causes
a stale pointer to be left here, with ensuing crashes like you're
seeing.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-24 15:48:56 -05:00
Finn Thain 6fe07aaffb [SCSI] m68k: new mac_esp scsi driver
Replace the mac_esp driver with a new one based on the esp_scsi core.

For esp_scsi: add support for sync transfers for the PIO mode, add a new
esp_driver_ops method to get the maximum dma transfer size (like the old
NCR53C9x driver), and some cleanups.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27 12:19:57 -05:00
Maciej W. Rozycki 522939d45c esp_scsi: fix reset cleanup spinlock recursion
The esp_reset_cleanup() function is called with the host lock held and
invokes starget_for_each_device() which wants to take it too.  Here is a
fix along the lines of shost_for_each_device()/__shost_for_each_device()
adding a __starget_for_each_device() counterpart which assumes the lock
has already been taken.

Eventually, I think the driver should get modified so that more work is
done as a softirq rather than in the interrupt context, but for now it
fixes a bug that causes the spinlock debugger to fire.

While at it, it fixes a small number of cosmetic problems with
starget_for_each_device() too.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-10 19:43:55 -08:00
Linus Torvalds df3d80f5a5 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...
2007-10-15 08:19:33 -07:00
Adrian Bunk 7624680824 [SCSI] esp_scsi: remove __dev{init,exit}
Since scsi_esp_{,un}register() are EXPORT_SYMBOL'ed, these functions
(and the functions they use) can't be __dev{init,exit}.

Based on a bug report by Rob Landley.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:19 -04:00
David Miller ff4abd6cfa [SCSI] esp: fix instance numbering.
Because the ->unique_id is set too late, the ESP scsi host
instance numbers in the kernel log during probing are
wrong.

Bug reported by Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-09-25 20:55:02 -05:00
Linus Torvalds bc06cffdec Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
  [SCSI] ibmvscsi: convert to use the data buffer accessors
  [SCSI] dc395x: convert to use the data buffer accessors
  [SCSI] ncr53c8xx: convert to use the data buffer accessors
  [SCSI] sym53c8xx: convert to use the data buffer accessors
  [SCSI] ppa: coding police and printk levels
  [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
  [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
  [SCSI] remove the dead CYBERSTORMIII_SCSI option
  [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
  [SCSI] Clean up scsi_add_lun a bit
  [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
  [SCSI] sni_53c710: Cleanup
  [SCSI] qla4xxx: Fix underrun/overrun conditions
  [SCSI] megaraid_mbox: use mutex instead of semaphore
  [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
  [SCSI] qla2xxx: update version to 8.02.00-k1.
  [SCSI] qla2xxx: add support for NPIV
  [SCSI] stex: use resid for xfer len information
  [SCSI] Add Brownie 1200U3P to blacklist
  [SCSI] scsi.c: convert to use the data buffer accessors
  ...
2007-07-15 16:51:54 -07:00
FUJITA Tomonori 4c2baaaf2b [SCSI] esp_scsi: convert to use the data buffer accessors
- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 18:36:24 -05:00