commit f1748b1ee1fa0fd1a074504045b530b62f949188 upstream.
A successfully received delayed response could anyway report a failure at
the protocol layer in the message status field.
Add a check also for this error condition.
Link: https://lore.kernel.org/r/20210608103056.3388-1-cristian.marussi@arm.com
Fixes: 58ecdf03db ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e469dac326555d2038d199a6329458cc82a34e5 upstream.
The bus probe callback calls the driver callback without further
checking. Better be safe than sorry and refuse registration of a driver
without a probe function to prevent a NULL pointer exception.
Link: https://lore.kernel.org/r/20210624095059.4010157-2-sudeep.holla@arm.com
Fixes: 933c504424 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bdb8742dc6f7c599c3d61959234fe4c23638727b ]
SCMI message headers carry a sequence number and such field is sized to
allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an
acceptable maximum number of pending in-flight messages.
Fix accordingly the checks performed on the value exported by transports
in scmi_desc.max_msg
Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.com
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: updated the patch title and error message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a691f16ccad05d770f813d9c4b4337a30c6d63f ]
The scmi_linux_errmap buffer access index is supposed to depend on the
array size to prevent element out of bounds access. It uses SCMI_ERR_MAX
to check bounds but that can mismatch with the array size. It also
changes the success into -EIO though scmi_linux_errmap is never used in
case of success, it is expected to work for success case too.
It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.
Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2bab693a608bdf614b9fcd44083c5100f34b9f77 upstream.
kexec_load_file() relies on the memblock infrastructure to avoid
stamping over regions of memory that are essential to the survival
of the system.
However, nobody seems to agree how to flag these regions as reserved,
and (for example) EFI only publishes its reservations in /proc/iomem
for the benefit of the traditional, userspace based kexec tool.
On arm64 platforms with GICv3, this can result in the payload being
placed at the location of the LPI tables. Shock, horror!
Let's augment the EFI reservation code with a memblock_reserve() call,
protecting our dear tables from the secondary kernel invasion.
Reported-by: Moritz Fischer <mdf@kernel.org>
Tested-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 674a9f1f6815849bfb5bf385e7da8fc198aaaba9 ]
Missing TPM final event log table is not a firmware bug.
Clearly if providing event log in the old format makes the final event
log invalid it should not be provided at least in that case.
Fixes: b4f1874c6216 ("tpm: check event log version before reading final events")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90ae47215de3fec862aeb1a0f0e28bb505ab1351 ]
Add more generic compatible string 'marvell,armada-3700-rwtm-firmware' for
this driver, since it can also be used on other Armada 3720 devices.
Current compatible string 'cznic,turris-mox-rwtm' is kept for backward
compatibility.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd778b893963d67d7eb01f49d84ffcd3eaf229dd ]
The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's
available.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eab59cf0d2036a5a9e264f719b71c21ccf679c2 ]
When Marvell's rWTM firmware, which does not support the GET_RANDOM
command, is used, kernel prints an error message
hwrng: no data available
every 10 seconds.
Fail probing of this driver if the rWTM firmware does not support the
GET_RANDOM command.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f99888944c44de1c899bbe44db1e53bdc9d994 ]
Report a notice level message if a command is not supported by the rWTM
firmware.
This should not be an error, merely a notice, because the firmware can
be used on boards that do not have manufacturing information burned.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e34e60253d9272311831daed8a2d967cf80ca3dc ]
The status decoding function mox_get_status() currently contains an
incorrect check: if the error status is not MBOX_STS_SUCCESS, it always
returns -EIO, so the comparison to MBOX_STS_FAIL is never executed and
we don't get the actual error code sent by the firmware.
Fix this.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb7af474e0dbb2f500c67aa62b6db9fafa74de2 ]
During an async commands execution the Rx buffer length is at first set
to max_msg_sz when the synchronous part of the command is first sent.
However once the synchronous part completes the transport layer waits
for the delayed response which will be processed using the same xfer
descriptor initially allocated. Since synchronous response received at
the end of the xfer will shrink the Rx buffer length to the effective
payload response length, it needs to be reset again.
Raise the Rx buffer length again to max_msg_sz before fetching the
delayed response to ensure full response is read correctly from the
shared memory.
Link: https://lore.kernel.org/r/20210601102421.26581-2-cristian.marussi@arm.com
Fixes: 58ecdf03db ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: moved reset to scmi_handle_response as it could race with
do_xfer_with_response]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fea67710e9f6a111a2c9440576f2396ccd92d57 ]
When call irq_get_irq_data() to get the IRQ's irq_data failed, an
appropriate error code -ENOENT should be returned. However, we directly
return 'err', which records the IRQ number instead of the error code.
Fixes: 139251fc22 ("firmware: tegra: add bpmp driver for Tegra210")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fca41af18e10318e4de090db47d9fa7169e1bf2f upstream.
fw_cfg_showrev() is called by an indirect call in kobj_attr_show(),
which violates clang's CFI checking because fw_cfg_showrev()'s second
parameter is 'struct attribute', whereas the ->show() member of 'struct
kobj_structure' expects the second parameter to be of type 'struct
kobj_attribute'.
$ cat /sys/firmware/qemu_fw_cfg/rev
3
$ dmesg | grep "CFI failure"
[ 26.016832] CFI failure (target: fw_cfg_showrev+0x0/0x8):
Fix this by converting fw_cfg_rev_attr to 'struct kobj_attribute' where
this would have been caught automatically by the incompatible pointer
types compiler warning. Update fw_cfg_showrev() accordingly.
Fixes: 75f3e8e47f ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Link: https://github.com/ClangBuiltLinux/linux/issues/1299
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210211194258.4137998-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d99247f9b542533ddbf87a3481a05473b8e48194 ]
If an error occurs after a successful 'kfifo_alloc()' call, it must be
undone by a corresponding 'kfifo_free()' call, as already done in the
remove function.
While at it, move the 'platform_device_put()' call to this new error
handling path and explicitly return 0 in the success path.
Fixes: b5dc75c915 ("firmware: stratix10-svc: extend svc to support new RSU features")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0ca3f3ab139c53e846804455a1e7599ee8ae896a.1621621271.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 942859d969de7f6f7f2659a79237a758b42782da ]
snprintf() should be given the full buffer size, not one less. And it
guarantees nul-termination, so doing it manually afterwards is
pointless.
It's even potentially harmful (though probably not in practice because
CPER_REC_LEN is 256), due to the "return how much would have been
written had the buffer been big enough" semantics. I.e., if the bank
and/or device strings are long enough that the "DIMM location ..."
output gets truncated, writing to msg[n] is a buffer overflow.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: 3760cd2040 ("CPER: Adjust code flow of some functions")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45add3cc99feaaf57d4b6f01d52d532c16a1caee ]
UEFI spec 2.9, p.108, table 4-1 lists the scenario that both attributes
are cleared with the description "No memory access protection is
possible for Entry". So we can have valid entries where both attributes
are cleared, so remove the check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 10f0d2f577 ("efi: Implement generic support for the Memory Attributes table")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9cd78edb2e6b7e26747c0ec312be31e7ef196fe ]
How the type promotion works in ternary expressions is a bit tricky.
The problem is that scpi_clk_get_val() returns longs, "ret" is a int
which holds a negative error code, and le32_to_cpu() is an unsigned int.
We want the negative error code to be cast to a negative long. But
because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and
becomes a high positive and then it is promoted to long and it is still
a high positive value.
Fix this by getting rid of the ternary.
Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda
Fixes: 8cb7cf56c9 ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[sudeep.holla: changed to return 0 as clock rate on error]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2954a6f12f250890ec2433cec03ba92784d613e8 ]
When CONFIG_QCOM_SCM is y and CONFIG_HAVE_ARM_SMCCC
is not set, compiling errors are encountered as follows:
drivers/firmware/qcom_scm-smc.o: In function `__scm_smc_do_quirk':
qcom_scm-smc.c:(.text+0x36): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call':
qcom_scm-legacy.c:(.text+0xe2): undefined reference to `__arm_smccc_smc'
drivers/firmware/qcom_scm-legacy.o: In function `scm_legacy_call_atomic':
qcom_scm-legacy.c:(.text+0x1f0): undefined reference to `__arm_smccc_smc'
Note that __arm_smccc_smc is defined when HAVE_ARM_SMCCC is y.
So add dependency on HAVE_ARM_SMCCC in QCOM_SCM configuration.
Fixes: 916f743da3 ("firmware: qcom: scm: Move the scm driver to drivers/firmware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Link: https://lore.kernel.org/r/20210406094200.60952-1-heying24@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9ceee7d0841a8f7d7644021ba7d4cc1fbc7966e3 upstream.
In the for loop in efi_mem_reserve_persistent(), prsv = rsv->next
use the unmapped rsv. Use the unmapped pages will cause segment
fault.
Fixes: 18df7577ad ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 36a237526cd81ff4b6829e6ebd60921c6f976e3b ]
CONFIG_EFI_EARLYCON defaults to yes, and thus is enabled on systems that
do not support EFI, or do not have EFI support enabled, but do satisfy
the symbol's other dependencies.
While drivers/firmware/efi/ won't be entered during the build phase if
CONFIG_EFI=n, and drivers/firmware/efi/earlycon.c itself thus won't be
built, enabling EFI_EARLYCON does force-enable CONFIG_FONT_SUPPORT and
CONFIG_ARCH_USE_MEMREMAP_PROT, and CONFIG_FONT_8x16, which is
undesirable.
Fix this by making CONFIG_EFI_EARLYCON depend on CONFIG_EFI.
This reduces kernel size on headless systems by more than 4 KiB.
Fixes: 69c1f396f2 ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20201124191646.3559757-1-geert@linux-m68k.org
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9724722fde8f9bbd2b87340f00b9300c9284001e ]
Few commands provide the list of description partially and require
to be called consecutively until all the descriptors are fetched
completely. In such cases, we don't release the buffers and reuse
them for consecutive transmits.
However, currently we don't reset the Rx size which will be set as
per the response for the last transmit. This may result in incorrect
response size being interpretted as the firmware may repond with size
greater than the one set but we read only upto the size set by previous
response.
Let us reset the receive buffer size to max possible in such cases as
we don't know the exact size of the response.
Link: https://lore.kernel.org/r/20201012141746.32575-1-sudeep.holla@arm.com
Fixes: b6f20ff8bd ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Reported-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45b9e04d5ba0b043783dfe2b19bb728e712cb32e ]
The defination for ARCH_COLD_RESET is wrong. Let us fix it according to
the SCMI specification.
Link: https://lore.kernel.org/r/20201008143722.21888-5-etienne.carriere@linaro.org
Fixes: 95a15d80aa ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
* tag 'v5.4.70': (3051 commits)
Linux 5.4.70
netfilter: ctnetlink: add a range check for l3/l4 protonum
ep_create_wakeup_source(): dentry name can change under you...
...
Conflicts:
arch/arm/mach-imx/pm-imx6.c
arch/arm64/boot/dts/freescale/imx8mm-evk.dts
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
drivers/crypto/caam/caamalg.c
drivers/gpu/drm/imx/dw_hdmi-imx.c
drivers/gpu/drm/imx/imx-ldb.c
drivers/gpu/drm/imx/ipuv3/ipuv3-crtc.c
drivers/mmc/host/sdhci-esdhc-imx.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
drivers/net/ethernet/freescale/enetc/enetc.c
drivers/net/ethernet/freescale/enetc/enetc_pf.c
drivers/thermal/imx_thermal.c
drivers/usb/cdns3/ep0.c
drivers/xen/swiotlb-xen.c
sound/soc/fsl/fsl_esai.c
sound/soc/fsl/fsl_sai.c
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
The structures used by imx_sc_rm_find_memreg() and
imx_sc_rm_get_resource_owner() had a "misc" in their name
but they are for the RM API.
This patch replaces the "misc" part by "rm".
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
[ Upstream commit 54f529a6806c9710947a4f2cdc15d6ea54121ccd ]
SDEI has private events that need registering and enabling on each CPU.
CPUs can come and go while we are trying to do this. SDEI tries to avoid
these problems by setting the reregister flag before the register call,
so any CPUs that come online register the event too. Sticking plaster
like this doesn't work, as if the register call fails, a CPU that
subsequently comes online will register the event before reregister
is cleared.
Take cpus_read_lock() around the register and enable calls. We don't
want surprise CPUs to do the wrong thing if they race with these calls
failing.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable mu8b power domain since we need use ep mu8b at rc side to
generate interrupts.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
commit 98086df8b70c06234a8f4290c46064e44dafa0ed upstream.
destroy_workqueue() should be called to destroy efi_rts_wq
when efisubsys_init() init resources fails.
Cc: <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Link: https://lore.kernel.org/r/1595229738-10087-1-git-send-email-liheng40@huawei.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e0f1a30cf184821499eeb67daedd7a3f21bbcb0b ]
When, at probe time, an SCMI communication failure inhibits the capacity
to query power domains states, such domains should be skipped.
Registering partially initialized SCMI power domains with genpd will
causes kernel panic.
arm-scmi timed out in resp(caller: scmi_power_state_get+0xa4/0xd0)
scmi-power-domain scmi_dev.2: failed to get state for domain 9
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000009f3691000
[0000000000000000] pgd=00000009f1ca0003, p4d=00000009f1ca0003, pud=00000009f35ea003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
CPU: 2 PID: 381 Comm: bash Not tainted 5.8.0-rc1-00011-gebd118c2cca8 #2
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Jan 3 2020
Internal error: Oops: 96000006 [#1] PREEMPT SMP
pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
pc : of_genpd_add_provider_onecell+0x98/0x1f8
lr : of_genpd_add_provider_onecell+0x48/0x1f8
Call trace:
of_genpd_add_provider_onecell+0x98/0x1f8
scmi_pm_domain_probe+0x174/0x1e8
scmi_dev_probe+0x90/0xe0
really_probe+0xe4/0x448
driver_probe_device+0xfc/0x168
device_driver_attach+0x7c/0x88
bind_store+0xe8/0x128
drv_attr_store+0x2c/0x40
sysfs_kf_write+0x4c/0x60
kernfs_fop_write+0x114/0x230
__vfs_write+0x24/0x50
vfs_write+0xbc/0x1e0
ksys_write+0x70/0xf8
__arm64_sys_write+0x24/0x30
el0_svc_common.constprop.3+0x94/0x160
do_el0_svc+0x2c/0x98
el0_sync_handler+0x148/0x1a8
el0_sync+0x158/0x180
Do not register any power domain that failed to be queried with genpd.
Fixes: 898216c97e ("firmware: arm_scmi: add device power domain support using genpd")
Link: https://lore.kernel.org/r/20200619220330.12217-1-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>