Commit Graph

30 Commits

Author SHA1 Message Date
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Jisheng Zhang eb14767c8a ARM: berlin: switch to SPDX license identifier
Use the appropriate SPDX license identifier and drop the previous
boilerplate license text.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
2018-05-24 14:49:09 +08:00
Jisheng Zhang e03b48098e arm: berlin: remove non-necessary flush_cache_all()
I believe the flush_cache_all() after scu_enable() is to "Ensure that
the data accessed by CPU0 before the SCU was initialised is visible
to the other CPUs." as commented in scu_enable(). So here
flush_cache_all() is a duplication, remove it.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
2018-05-24 14:49:09 +08:00
Alexander Monakov 2e554390ab ARM: berlin: extend BG2CD Kconfig entry
BG2CD SoC uses r3p0 Cortex-A9 MPCore single-CPU cluster. Autoselect
pertinent errata, the SCU and the global timer, and allow use of the
local timer on uniprocessor kernels.

PL310 L2 cache controller has revision r3p2; no errata to select.

Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
2018-05-24 14:48:50 +08:00
Afzal Mohammed d2ca5f2491 ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro
definition will suffice.

For no-MMU, exception base address is dynamically determined in
subsequent patches. To preserve bisectability, now make the
macro applicable for no-MMU scenario too.

Thanks to 0-DAY kernel test infrastructure that found the
bisectability issue. This macro will be restricted to MMU case upon
dynamically determining exception base address for no-MMU.

Once exception address is handled dynamically for no-MMU,
VECTORS_BASE can be removed from Kconfig.

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-02-28 11:06:12 +00:00
Florian Fainelli 64fc2a947a ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
All low-level PM/SMP code using virt_to_phys() should actually use
__pa_symbol() against kernel symbols. Update code where relevant to move
away from virt_to_phys().

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-02-28 11:06:10 +00:00
Linus Walleij 5c34a4e89c ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
  now be selected directly.

- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
  is now selectable by everyone, so we need not declare our
  intent to select it.

When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".

Cc: Michael Büsch <m@bues.ch>
Cc: arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-03 12:18:13 -07:00
Viresh Kumar a59511d1da cpufreq: berlin: Use generic platdev driver
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25 16:18:23 +02:00
Masahiro Yamada e324654294 ARM: use "depends on" for SoC configs instead of "if" after prompt
Many ARM sub-architectures use prompts followed by "if" conditional,
but it is wrong.

Please notice the difference between

    config ARCH_FOO
            bool "Foo SoCs" if ARCH_MULTI_V7

and

    config ARCH_FOO
            bool "Foo SoCs"
            depends on ARCH_MULTI_V7

These two are *not* equivalent!

In the former statement, it is not ARCH_FOO, but its prompt that
depends on ARCH_MULTI_V7.  So, it is completely valid that ARCH_FOO
is selected by another, but ARCH_MULTI_V7 is still disabled. As it is
not unmet dependency, Kconfig never warns.  This is probably not what
you want.

The former should be used only when you need to do so, and you really
understand what you are doing.  (In most cases, it should be wrong!)

For enabling/disabling sub-architectures, the latter is always correct.

As a good side effect, this commit fixes some entries over 80 columns
(mach-imx, mach-integrator, mach-mbevu).

[Arnd: I note that there is not really a bug here, according to
 the discussion that followed, but I can see value in being consistent
 and in making the lines shorter]

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Krzysztof Halasa <khc@piap.pl>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01 22:44:51 +01:00
Masahiro Yamada 75305275a7 ARM: use const and __initconst for smp_operations
These smp_operations structures are not over-written, so add "const"
qualifier and replace __initdata with __initconst.

Also, add "static" where it is possible.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org> # qcom part
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01 22:17:45 +01:00
Jisheng Zhang a7b3d5a715 arm: berlin: add CPU hotplug support
Add cpu hotplug support for berlin SoCs such as BG2 and BG2Q. These SoC
don't support power off cpu independently, but we also want cpu hotplug
support in these SoCs. We achieve this goal by putting the dying CPU in
WFI state after the coherency is disabled, then asserting the dying CPU
reset bit to put the CPU in reset state.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-10-15 21:14:28 +02:00
Jisheng Zhang ac7fc233b2 arm: berlin: use non-self-cleared reset register to reset cpu
In Berlin SoCs, there are two kinds of cpu reset control registers: the
first one's corresponding bits will be self-cleared after some cycles,
while the second one's bits won't. Previously the first kind of reset
control register is used, this patch uses the second kind one to prepare
for the next hotplug commit.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-10-15 21:10:22 +02:00
Antoine Tenart e1a3e724a2 ARM: berlin: register cpufreq-dt
The Berlin SoCs use cpufreq-dt for cpufreq. Register a platform device.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-09-21 22:57:24 +02:00
Linus Torvalds f5dcb68086 ARM: SoC: driver updates for v4.2
Some of these are for drivers/soc, where we're now putting
 SoC-specific drivers these days. Some are for other driver subsystems
 where we have received acks from the appropriate maintainers.
 
 Some highlights:
 
 - simple-mfd: document DT bindings and misc updates
 - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
 - memory: support for Tegra132 SoC
 - memory: introduce tegra EMC driver for scaling memory frequency
 - misc. updates for ARM CCI and CCN busses
 
  Conflicts:
 	arch/arm64/boot/dts/arm/juno-motherboard.dtsi
 
  Trivial add/add conflict with our dt branch.
  Resolution: take both sides.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RRAAoJEFk3GJrT+8ZljIcQAIsqxM/o0drd90xTJ6ex9h0B
 RmqVLTDgesHmBacJ+SBsa9/ybFIM1uErByftc1dmKankEQVXW3wcH7keQnoStPT2
 zTEjadHgZ/ARYjV/oG5oohjfDZpO1kECVHL8O8RmcWxgzRB3az1IW2eD+dzrga/Y
 R7K6D8rDHMADIUmv0e0DzvQEbSUYdCx3rBND1qZznwZDP3NoivLkOG5MTraccLbQ
 ouCRoZtyNYD5Lxk+BHLBepnxAa0Ggc6IjEmiUv8fF2OYdu0OruMliT4rcAtOSmzg
 2Y7pP85h8u0CxbJDkOyc+2BELyKo7Hv97XtDNNbRYABTMXdskRIadXt4Sh4mwFtM
 nvlhB4ovbIX7noECJToEkSAgmStLSUwA3R6+DVdLbeQY4uSuXuTRhiWHMyQB6va9
 CdjJDk2RE0dZ77c5ZoUnUDtBe4cULU/n4agpYkKMf/HcpnqMUwZzP4KZbbPMBpgL
 0CVTt3YrEcjoU7g0SFHhOGPSgl4yIXKU2eHEscokyFYLrS5zRWepmUEmlSoaWn+W
 p7pJE65TvOGf2xbaWI+UBeK/3ZG7XAP8qUfhsi7NS4bV6oFCk/foqsWAuru0H7OW
 2Gk8fuF0qLgE1eFWQp8BHZ4IUeytoWbnGhhHXh8zH39SKAVncOiAGDNfuEP9CyXJ
 fZFfruYrnz2emOwj2v9m
 =02Gm
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...
2015-06-26 11:54:29 -07:00
Russell King 02b4e2756e ARM: v7 setup function should invalidate L1 cache
All ARMv5 and older CPUs invalidate their caches in the early assembly
setup function, prior to enabling the MMU.  This is because the L1
cache should not contain any data relevant to the execution of the
kernel at this point; all data should have been flushed out to memory.

This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed,
these typically do not search their caches when caching is disabled (as
it needs to be when the MMU is disabled) so this change should be safe.

ARMv7 allows there to be CPUs which search their caches while caching is
disabled, and it's permitted that the cache is uninitialised at boot;
for these, the architecture reference manual requires that an
implementation specific code sequence is used immediately after reset
to ensure that the cache is placed into a sane state.  Such
functionality is definitely outside the remit of the Linux kernel, and
must be done by the SoC's firmware before _any_ CPU gets to the Linux
kernel.

Changing the data cache clean+invalidate to a mere invalidate allows us
to get rid of a lot of platform specific hacks around this issue for
their secondary CPU bringup paths - some of which were buggy.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-01 11:30:26 +01:00
Antoine Tenart 9f69e8a710 ARM: berlin: select MFD_SYSCON by default
The chip and system controller nodes handle sub-devices, such as the
clock, pinctrl or reset controllers. The drivers handling them need a
regmap provided by syscon. Select it by default when using a Berlin SoC.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-05-18 17:52:28 +02:00
Antoine Tenart 81906906d8 ARM: berlin: do not select RESET_CONTROLLER
RESET_CONTROLLER is meant to be user-selectable. To respect that,
do not select it automatically when using ARCH_BERLIN.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18 20:27:53 +01:00
Antoine Ténart e9246c8726 ARM: Berlin: select the reset controller
The Marvell Berlin SoCs now has a reset controller. Add the needed
configuration. While at it reorder Kconfigs alphabetically.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-10-21 11:35:15 +02:00
Olof Johansson 3ae22f4d94 Berlin SoC changes for v3.17
- SMP support for BG2 and BG2Q
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTsWd4AAoJEN2kpao7fSL4Uq8P/2cRieGwUc7KBKIeK9pGIOrf
 9rLXyK57siZIgdBCTR0/EitNs+SuHNMy9NEYwVc0EasnarJW70Gy1Iq+F3WlaiVi
 OZrXqdl//pjGpmzAUujZiacsbg75AAvMKudqCLKeVK0CLvLAviRtHhtOE2878ase
 YGDEcFqdYqE4cktX6wOnF0MWzJa+s4V/ekh4450P+1XObR+Qluc4S2Q2U7BVfIN3
 jSNtyYO1QV5dTwuCYlDA+t0dyxU1ZF7HVHvEZX7nAQQhmS0YKRJP3OdhqTRZCAj4
 H0/5nJP298zbqioZ2ilGYz5o17Dn+gNL6+RDiK/rvWxeeUU7z3ZoYEOV1ddwBAxw
 cMto/v5gILRfQ8aROOQ6++1J0tutcMIvAdnTZ9GHfID1oGbBb9h8BD37+XB5teFX
 0EwFzyZ1PPeznK4Ty803t+x5GDaz5wqe4KQpAfqNAXFwUfdpM7Tb+sFE1NDHCqmS
 uP7J+0yCMQQy2WkUKin3vOV/+2RyFs11QUT8onh5uuiRkG+1IPEFyA3BQjgA+H5J
 WZqhM923Wqx+9Y/oUK9zOP8MeJpCu5n4Q+f1FQX0Nx++HJZMTUaUIClasf36INo0
 EyMqTrF8WrLaUCSiuu6/OsrMBcryFOZH+df5qMmCxVDd6Ztizo3F8rSU7fzXvRcz
 lVHpsWJnNYiYCN18h7T4
 =iBym
 -----END PGP SIGNATURE-----

Merge tag 'berlin-soc-3.17-1' of git://git.infradead.org/users/hesselba/linux-berlin into next/soc

Merge "Berlin SoC changes for v3.17" from Sebastian Hesselbarth:

- SMP support for BG2 and BG2Q

* tag 'berlin-soc-3.17-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: berlin: add SMP support

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07 22:42:24 -07:00
Rob Herring 21278aeafb ARM: use menuconfig for sub-arch menus
The System Type menu is getting quite long with platforms and is
inconsistent in handling of sub-arch specific options. Tidy up the menu
by making platform options a menuconfig entry containing any platform
specific config items.

[arnd: change OMAP part according to suggestion from
 Tony Lindgren <tony@atomide.com>]

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:48 +02:00
Antoine Ténart 7b7dfdd2b9 ARM: berlin: add SMP support
Adds SMP support for Berlin SoCs. Secondary CPUs are reset, then
execute the instruction we put in the reset exception register, setting
the pc at the address contained in the software reset address register,
which is the physical address of the Berlin secondary startup.

This implementation avoid using the pen lock mechanism.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-06-16 13:16:44 +02:00
Linus Torvalds eb3d3ec567 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
Pull ARM updates from Russell King:

 - Major clean-up of the L2 cache support code.  The existing mess was
   becoming rather unmaintainable through all the additions that others
   have done over time.  This turns it into a much nicer structure, and
   implements a few performance improvements as well.

 - Clean up some of the CP15 control register tweaks for alignment
   support, moving some code and data into alignment.c

 - DMA properties for ARM, from Santosh and reviewed by DT people.  This
   adds DT properties to specify bus translations we can't discover
   automatically, and to indicate whether devices are coherent.

 - Hibernation support for ARM

 - Make ftrace work with read-only text in modules

 - add suspend support for PJ4B CPUs

 - rework interrupt masking for undefined instruction handling, which
   allows us to enable interrupts earlier in the handling of these
   exceptions.

 - support for big endian page tables

 - fix stacktrace support to exclude stacktrace functions from the
   trace, and add save_stack_trace_regs() implementation so that kprobes
   can record stack traces.

 - Add support for the Cortex-A17 CPU.

 - Remove last vestiges of ARM710 support.

 - Removal of ARM "meminfo" structure, finally converting us solely to
   memblock to handle the early memory initialisation.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
  ARM: ensure C page table setup code follows assembly code (part II)
  ARM: ensure C page table setup code follows assembly code
  ARM: consolidate last remaining open-coded alignment trap enable
  ARM: remove global cr_no_alignment
  ARM: remove CPU_CP15 conditional from alignment.c
  ARM: remove unused adjust_cr() function
  ARM: move "noalign" command line option to alignment.c
  ARM: provide common method to clear bits in CPU control register
  ARM: 8025/1: Get rid of meminfo
  ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
  ARM: 8066/1: correction for ARM patch 8031/2
  ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
  ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
  ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
  ARM: 8047/1: rwsem: use asm-generic rwsem implementation
  ARM: l2c: trial at enabling some Cortex-A9 optimisations
  ARM: l2c: add warnings for stuff modifying aux_ctrl register values
  ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
  ARM: l2c: remove old .set_debug method
  ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
  ...
2014-06-05 15:57:04 -07:00
Russell King a048711c0b ARM: l2c: berlin: convert to generic l2c OF initialisation
Remove the explicit call to l2x0_of_init(), converting to the generic
infrastructure instead.  We can remove the explicit machine init too
as this becomes identical to the generic version.

Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:49:06 +01:00
Russell King 36bccb11a4 ARM: l2c: remove platforms/SoCs setting early BRESP
Since we now automatically enable early BRESP in core L2C-310 code when
we detect a Cortex-A9, we don't need platforms/SoCs to set this bit
explicitly.  Instead, they should seek to preserve the value of bit 30
in the auxiliary control register.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:48:51 +01:00
Antoine Tenart 03dac26a83 ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-05-19 22:52:39 +02:00
Antoine Tenart d45fa871c0 ARM: berlin: add the LIBGPIO as a dependency for the BG2Q
The BG2Q has GPIOs driven by the dwapb GPIO driver. Add the LIBGPIO as a
dependency to be able to support them.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-05-19 22:52:28 +02:00
Alexandre Belloni cb56c643cc ARM: berlin: add MACH_BERLIN_BG2Q symbol
Now that we start supporting the Marvell Berlin BG2Q, add a symbol allowing to
differentiate that SoC from the other SoCs of the Berlin family.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-05-19 22:52:23 +02:00
Rob Herring 90bc8ac77d ARM: select HAVE_SMP for V7 multi-platform
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7
multi-platform builds.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:43:27 -06:00
Rob Herring ddb902cc34 ARM: centralize common multi-platform kconfig options
Multi-platform requires various kconfig options to be selected, so
platforms don't need to select them individually.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-02-19 16:38:18 -06:00
Sebastian Hesselbarth 1c37fa10b2 ARM: add initial support for Marvell Berlin SoCs
This adds initial support for the Marvell Berlin SoC family with
Armada 1500 (88DE3100) and Armada 1500-mini (88DE3005) SoCs.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-12-13 16:31:07 +01:00