commit 81be24d263 upstream.
It's not hard to trigger a bunch of d_invalidate() on the same
dentry in parallel. They end up fighting each other - any
dentry picked for removal by one will be skipped by the rest
and we'll go for the next iteration through the entire
subtree, even if everything is being skipped. Morevoer, we
immediately go back to scanning the subtree. The only thing
we really need is to dissolve all mounts in the subtree and
as soon as we've nothing left to do, we can just unhash the
dentry and bugger off.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 674a2b2723 upstream.
All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.
- Create and mount an empty ext4 filesystem without extent and quota
features,
- quotacheck and enable the user & group quota,
- Create some files and write some data to them, and then punch hole
to some files of them, it may trigger the buffer leak problem
mentioned above.
- Disable quota and run quotacheck again, it will create two new
aquota files and write the checked quota information to them, which
probably may reuse the freed indirect block(the buffer and page
cache was not freed) as data block.
- Enable quota again, it will invoke
vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
buffers and pagecache. Unfortunately, because of the buffer of quota
data block is still referenced, quota code cannot read the up to date
quota info from the device and lead to quota information corruption.
This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.
This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 372a03e018 upstream.
Ext4 needs to serialize unaligned direct AIO because the zeroing of
partial blocks of two competing unaligned AIOs can result in data
corruption.
However it decides not to serialize if the potentially unaligned aio is
past i_size with the rationale that no pending writes are possible past
i_size. Unfortunately if the i_size is not block aligned and the second
unaligned write lands past i_size, but still into the same block, it has
the potential of corrupting the previous unaligned write to the same
block.
This is (very simplified) reproducer from Frank
// 41472 = (10 * 4096) + 512
// 37376 = 41472 - 4096
ftruncate(fd, 41472);
io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376);
io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472);
io_submit(io_ctx, 1, &iocbs[1]);
io_submit(io_ctx, 1, &iocbs[2]);
io_getevents(io_ctx, 2, 2, events, NULL);
Without this patch the 512B range from 40960 up to the start of the
second unaligned write (41472) is going to be zeroed overwriting the data
written by the first write. This is a data corruption.
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
*
0000a000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31
With this patch the data corruption is avoided because we will recognize
the unaligned_aio and wait for the unwritten extent conversion.
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
*
0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31
*
0000b200
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes: e9e3bcecf4 ("ext4: serialize unaligned asynchronous DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa30dde38a upstream.
We see the following NULL pointer dereference while running xfstests
generic/475:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10
RIP: 0010:ext4_do_update_inode+0x4ec/0x760
...
Call Trace:
? jbd2_journal_get_write_access+0x42/0x50
? __ext4_journal_get_write_access+0x2c/0x70
? ext4_truncate+0x186/0x3f0
ext4_mark_iloc_dirty+0x61/0x80
ext4_mark_inode_dirty+0x62/0x1b0
ext4_truncate+0x186/0x3f0
? unmap_mapping_pages+0x56/0x100
ext4_setattr+0x817/0x8b0
notify_change+0x1df/0x430
do_truncate+0x5e/0x90
? generic_permission+0x12b/0x1a0
This is triggered because the NULL pointer handle->h_transaction was
dereferenced in function ext4_update_inode_fsync_trans().
I found that the h_transaction was set to NULL in jbd2__journal_restart
but failed to attached to a new transaction while the journal is aborted.
Fix this by checking the handle before updating the inode.
Fixes: b436b9bef8 ("ext4: Wait for proper transaction commit on fsync")
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3ca4651d0 upstream.
When truncate(2) hits IO error when reading indirect extent block the
code just bugs with:
kernel BUG at linux-4.15.0/fs/udf/truncate.c:249!
...
Fix the problem by bailing out cleanly in case of IO error.
CC: stable@vger.kernel.org
Reported-by: jean-luc malet <jeanluc.malet@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd838821f0 upstream.
Commit 62a063b8e7 "nfsd4: fix crash on writing v4_end_grace before
nfsd startup" is trying to fix a NULL dereference issue, but it
mistakenly checks if the nfsd server is started. So fix it.
Fixes: 62a063b8e7 "nfsd4: fix crash on writing v4_end_grace before nfsd startup"
Cc: stable@vger.kernel.org
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b602345da6 upstream.
If the result of an NFSv3 readdir{,plus} request results in the
"offset" on one entry having to be split across 2 pages, and is sized
so that the next directory entry doesn't fit in the requested size,
then memory corruption can happen.
When encode_entry() is called after encoding the last entry that fits,
it notices that ->offset and ->offset1 are set, and so stores the
offset value in the two pages as required. It clears ->offset1 but
*does not* clear ->offset.
Normally this omission doesn't matter as encode_entry_baggage() will
be called, and will set ->offset to a suitable value (not on a page
boundary).
But in the case where cd->buflen < elen and nfserr_toosmall is
returned, ->offset is not reset.
This means that nfsd3proc_readdirplus will see ->offset with a value 4
bytes before the end of a page, and ->offset1 set to NULL.
It will try to write 8bytes to ->offset.
If we are lucky, the next page will be read-only, and the system will
BUG: unable to handle kernel paging request at...
If we are unlucky, some innocent page will have the first 4 bytes
corrupted.
nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly
writes 8 bytes to the offset wherever it is.
Fix this by clearing ->offset after it is used, and copying the
->offset handling code from nfsd3_proc_readdirplus into
nfsd3_proc_readdir.
(Note that the commit hash in the Fixes tag is from the 'history'
tree - this bug predates git).
Fixes: 0b1d57cf7654 ("[PATCH] kNFSd: Fix nfs3 dentry encoding")
Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654
Cc: stable@vger.kernel.org (v2.6.12+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8127d82705 upstream.
If the I/O completion failed with a fatal error, then we should just
exit nfs_pageio_complete_mirror() rather than try to recoalesce.
Fixes: a7d42ddb30 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d91969ed4 upstream.
Whether we need to exit early, or just reprocess the list, we
must not lost track of the request which failed to get recoalesced.
Fixes: 03d5eb65b5 ("NFS: Fix a memory leak in nfs_do_recoalesce")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f57dcf4c72 upstream.
When we fail to add the request to the I/O queue, we currently leave it
to the caller to free the failed request. However since some of the
requests that fail are actually created by nfs_pageio_add_request()
itself, and are not passed back the caller, this leads to a leakage
issue, which can again cause page locks to leak.
This commit addresses the leakage by freeing the created requests on
error, using desc->pg_completion_ops->error_cleanup()
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fixes: a7d42ddb30 ("nfs: add mirroring support to pgio layer")
Cc: stable@vger.kernel.org # v4.0: c18b96a1b862: nfs: clean up rest of reqs
Cc: stable@vger.kernel.org # v4.0: d600ad1f2bdb: NFS41: pop some layoutget
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01215d3edb upstream.
The jh pointer may be used uninitialized in the two cases below and the
compiler complain about it when enabling JBUFFER_TRACE macro, fix them.
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
In file included from fs/jbd2/transaction.c:19:0:
fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’:
./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0)
^
fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here
struct journal_head *jh;
^
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 904cdbd41d upstream.
Now, we capture a data corruption problem on ext4 while we're truncating
an extent index block. Imaging that if we are revoking a buffer which
has been journaled by the committing transaction, the buffer's jbddirty
flag will not be cleared in jbd2_journal_forget(), so the commit code
will set the buffer dirty flag again after refile the buffer.
fsx kjournald2
jbd2_journal_commit_transaction
jbd2_journal_revoke commit phase 1~5...
jbd2_journal_forget
belongs to older transaction commit phase 6
jbddirty not clear __jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
test_clear_buffer_jbddirty
mark_buffer_dirty
Finally, if the freed extent index block was allocated again as data
block by some other files, it may corrupt the file data after writing
cached pages later, such as during unmount time. (In general,
clean_bdev_aliases() related helpers should be invoked after
re-allocation to prevent the above corruption, but unfortunately we
missed it when zeroout the head of extra extent blocks in
ext4_ext_handle_unwritten_extents()).
This patch mark buffer as freed and set j_next_transaction to the new
transaction when it already belongs to the committing transaction in
jbd2_journal_forget(), so that commit code knows it should clear dirty
bits when it is done with the buffer.
This problem can be reproduced by xfstests generic/455 easily with
seeds (3246 3247 3248 3249).
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c2d14212b upstream.
When ext2 filesystem is created with 64k block size, ext2_max_size()
will return value less than 0. Also, we cannot write any file in this fs
since the sb->maxbytes is less than 0. The core of the problem is that
the size of block index tree for such large block size is more than
i_blocks can carry. So fix the computation to count with this
possibility.
File size limits computed with the new function for the full range of
possible block sizes look like:
bits file_size
10 17247252480
11 275415851008
12 2196873666560
13 2197948973056
14 2198486220800
15 2198754754560
16 2198888906752
CC: stable@vger.kernel.org
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f96c3ac8df upstream.
When computing maximum size of filesystem possible with given number of
group descriptor blocks, we forget to include s_first_data_block into
the number of blocks. Thus for filesystems with non-zero
s_first_data_block it can happen that computed maximum filesystem size
is actually lower than current filesystem size which confuses the code
and eventually leads to a BUG_ON in ext4_alloc_group_tables() hitting on
flex_gd->count == 0. The problem can be reproduced like:
truncate -s 100g /tmp/image
mkfs.ext4 -b 1024 -E resize=262144 /tmp/image 32768
mount -t ext4 -o loop /tmp/image /mnt
resize2fs /dev/loop0 262145
resize2fs /dev/loop0 300000
Fix the problem by properly including s_first_data_block into the
computed number of filesystem blocks.
Fixes: 1c6bd7173d "ext4: convert file system to meta_bg if needed..."
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e92821878 upstream.
In the past we had data corruption when reading compressed extents that
are shared within the same file and they are consecutive, this got fixed
by commit 005efedf2c ("Btrfs: fix read corruption of compressed and
shared extents") and by commit 808f80b467 ("Btrfs: update fix for read
corruption of compressed and shared extents"). However there was a case
that was missing in those fixes, which is when the shared and compressed
extents are referenced with a non-zero offset. The following shell script
creates a reproducer for this issue:
#!/bin/bash
mkfs.btrfs -f /dev/sdc &> /dev/null
mount -o compress /dev/sdc /mnt/sdc
# Create a file with 3 consecutive compressed extents, each has an
# uncompressed size of 128Kb and a compressed size of 4Kb.
for ((i = 1; i <= 3; i++)); do
head -c 4096 /dev/zero
for ((j = 1; j <= 31; j++)); do
head -c 4096 /dev/zero | tr '\0' "\377"
done
done > /mnt/sdc/foobar
sync
echo "Digest after file creation: $(md5sum /mnt/sdc/foobar)"
# Clone the first extent into offsets 128K and 256K.
xfs_io -c "reflink /mnt/sdc/foobar 0 128K 128K" /mnt/sdc/foobar
xfs_io -c "reflink /mnt/sdc/foobar 0 256K 128K" /mnt/sdc/foobar
sync
echo "Digest after cloning: $(md5sum /mnt/sdc/foobar)"
# Punch holes into the regions that are already full of zeroes.
xfs_io -c "fpunch 0 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 128K 4K" /mnt/sdc/foobar
xfs_io -c "fpunch 256K 4K" /mnt/sdc/foobar
sync
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
echo "Dropping page cache..."
sysctl -q vm.drop_caches=1
echo "Digest after hole punching: $(md5sum /mnt/sdc/foobar)"
umount /dev/sdc
When running the script we get the following output:
Digest after file creation: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
linked 131072/131072 bytes at offset 131072
128 KiB, 1 ops; 0.0033 sec (36.960 MiB/sec and 295.6830 ops/sec)
linked 131072/131072 bytes at offset 262144
128 KiB, 1 ops; 0.0015 sec (78.567 MiB/sec and 628.5355 ops/sec)
Digest after cloning: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Digest after hole punching: 5a0888d80d7ab1fd31c229f83a3bbcc8 /mnt/sdc/foobar
Dropping page cache...
Digest after hole punching: fba694ae8664ed0c2e9ff8937e7f1484 /mnt/sdc/foobar
This happens because after reading all the pages of the extent in the
range from 128K to 256K for example, we read the hole at offset 256K
and then when reading the page at offset 260K we don't submit the
existing bio, which is responsible for filling all the page in the
range 128K to 256K only, therefore adding the pages from range 260K
to 384K to the existing bio and submitting it after iterating over the
entire range. Once the bio completes, the uncompressed data fills only
the pages in the range 128K to 256K because there's no more data read
from disk, leaving the pages in the range 260K to 384K unfilled. It is
just a slightly different variant of what was solved by commit
005efedf2c ("Btrfs: fix read corruption of compressed and shared
extents").
Fix this by forcing a bio submit, during readpages(), whenever we find a
compressed extent map for a page that is different from the extent map
for the previous page or has a different starting offset (in case it's
the same compressed extent), instead of the extent map's original start
offset.
A test case for fstests follows soon.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Fixes: 808f80b467 ("Btrfs: update fix for read corruption of compressed and shared extents")
Fixes: 005efedf2c ("Btrfs: fix read corruption of compressed and shared extents")
Cc: stable@vger.kernel.org # 4.3+
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 349ae63f40 upstream.
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes: e06cd3dd7c ("Btrfs: add validadtion checks for chunk loading")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0ce2f0aa6 upstream.
Before this patch, it was possible for two pipes to affect each other after
data had been transferred between them with tee():
============
$ cat tee_test.c
int main(void) {
int pipe_a[2];
if (pipe(pipe_a)) err(1, "pipe");
int pipe_b[2];
if (pipe(pipe_b)) err(1, "pipe");
if (write(pipe_a[1], "abcd", 4) != 4) err(1, "write");
if (tee(pipe_a[0], pipe_b[1], 2, 0) != 2) err(1, "tee");
if (write(pipe_b[1], "xx", 2) != 2) err(1, "write");
char buf[5];
if (read(pipe_a[0], buf, 4) != 4) err(1, "read");
buf[4] = 0;
printf("got back: '%s'\n", buf);
}
$ gcc -o tee_test tee_test.c
$ ./tee_test
got back: 'abxx'
$
============
As suggested by Al Viro, fix it by creating a separate type for
non-mergeable pipe buffers, then changing the types of buffers in
splice_pipe_to_pipe() and link_pipe().
Cc: <stable@vger.kernel.org>
Fixes: 7c77f0b3f9 ("splice: implement pipe to pipe splicing")
Fixes: 70524490ee ("[PATCH] splice: add support for sys_tee()")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73052b0dae upstream.
d_delete only unhashes an entry if it is reached with
dentry->d_lockref.count != 1. Prior to commit 8ead9dd547 ("devpts:
more pty driver interface cleanups"), d_delete was called on a dentry
from devpts_pty_kill with two references held, which would trigger the
unhashing, and the subsequent dputs would release it.
Commit 8ead9dd547 reworked devpts_pty_kill to stop acquiring the second
reference from d_find_alias, and the d_delete call left the dentries
still on the hashed list without actually ever being dropped from dcache
before explicit cleanup. This causes the number of negative dentries for
devpts to pile up, and an `ls /dev/pts` invocation can take seconds to
return.
Provide always_delete_dentry() from simple_dentry_operations
as .d_delete for devpts, to make the dentry be dropped from dcache.
Without this cleanup, the number of dentries in /dev/pts/ can be grown
arbitrarily as:
`python -c 'import pty; pty.spawn(["ls", "/dev/pts"])'`
A systemtap probe on dcache_readdir to count d_subdirs shows this count
to increase with each pty spawn invocation above:
probe kernel.function("dcache_readdir") {
subdirs = &@cast($file->f_path->dentry, "dentry")->d_subdirs;
p = subdirs;
p = @cast(p, "list_head")->next;
i = 0
while (p != subdirs) {
p = @cast(p, "list_head")->next;
i = i+1;
}
printf("number of dentries: %d\n", i);
}
Fixes: 8ead9dd547 ("devpts: more pty driver interface cleanups")
Signed-off-by: Varad Gautam <vrd@amazon.de>
Reported-by: Zheng Wang <wanz@amazon.de>
Reported-by: Brandon Schwartz <bsschwar@amazon.de>
Root-caused-by: Maximilian Heyne <mheyne@amazon.de>
Root-caused-by: Nicolas Pernas Maradei <npernas@amazon.de>
CC: David Woodhouse <dwmw@amazon.co.uk>
CC: Maximilian Heyne <mheyne@amazon.de>
CC: Stefan Nuernberger <snu@amazon.de>
CC: Amit Shah <aams@amazon.de>
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Al Viro <viro@ZenIV.linux.org.uk>
CC: Christian Brauner <christian.brauner@ubuntu.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Matthew Wilcox <willy@infradead.org>
CC: Eric Biggers <ebiggers@google.com>
CC: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dfbd84684 upstream.
When we have a READ lease for a file and have just issued a write
operation to the server we need to purge the cache and set oplock/lease
level to NONE to avoid reading stale data. Currently we do that
only if a write operation succedeed thus not covering cases when
a request was sent to the server but a negative error code was
returned later for some other reasons (e.g. -EIOCBQUEUED or -EINTR).
Fix this by turning off caching regardless of the error code being
returned.
The patches fixes generic tests 075 and 112 from the xfs-tests.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b9b9edb49 upstream.
Currently on lease break the client sets a caching level twice:
when oplock is detected and when oplock is processed. While the
1st attempt sets the level to the value provided by the server,
the 2nd one resets the level to None unconditionally.
This happens because the oplock/lease processing code was changed
to avoid races between page cache flushes and oplock breaks.
The commit c11f1df500 ("cifs: Wait for writebacks to complete
before attempting write.") fixed the races for oplocks but didn't
apply the same changes for leases resulting in overwriting the
server granted value to None. Fix this by properly processing
lease breaks.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e3cc1ee14 upstream.
Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:
watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
Modules linked in:
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
PC is at generic_fillattr+0x104/0x108
LR is at 0xec497f00
pc : [<802b8898>] lr : [<ec497f00>] psr: 200c0013
sp : ec497e20 ip : ed608030 fp : ec497e3c
r10: 00000000 r9 : ec497f00 r8 : ed608030
r7 : ec497ebc r6 : ec497f00 r5 : ee5c1550 r4 : ee005780
r3 : 0000052d r2 : 00000000 r1 : ec497f00 r0 : ed608030
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: ac48006a DAC: 00000051
CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
Hardware name: Generic DT based system
Backtrace:
[<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
[<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
[<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
[<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
[<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
[<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
[<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
[<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
[<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
[<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
[<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
[<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
[<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
[<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
[<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
[<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
[<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
[<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
[<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
[<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
[<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)
[dominique.martinet@cea.fr: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 7549ae3e81 ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: Xing Gaopeng <xingaopeng@huawei.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43636c804d ]
When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.
[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.873324][T15342] b_state=0x00000029, b_size=512
[ 399.878403][T15342] device loop0 blocksize: 4096
[ 399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.890400][T15342] b_state=0x00000029, b_size=512
[ 399.895595][T15342] device loop0 blocksize: 4096
[ 399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.907471][T15342] b_state=0x00000029, b_size=512
[ 399.912506][T15342] device loop0 blocksize: 4096
This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.
[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f585b283e3 ]
In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.
Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63ce5f552b ]
autofs_expire_run() calls dput(dentry) to drop the reference count of
dentry. However, dentry is read via autofs_dentry_ino(dentry) after
that. This may result in a use-free-bug. The patch drops the reference
count of dentry only when it is never used.
Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-net
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c27d82f52f ]
When superblock has lots of inodes without any pagecache (like is the
case for /proc), drop_pagecache_sb() will iterate through all of them
without dropping sb->s_inode_list_lock which can lead to softlockups
(one of our customers hit this).
Fix the problem by going to the slow path and doing cond_resched() in
case the process needs rescheduling.
Link: http://lkml.kernel.org/r/20190114085343.15011-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d15ed120 ]
The size of the fixed part of the create response is 88 bytes not 56.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80ff001724 ]
There is a NULL pointer dereference of dev_name in nfs_parse_devname()
The oops looks something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs]
...
Call Trace:
? ida_alloc_range+0x34b/0x3d0
? nfs_clone_super+0x80/0x80 [nfs]
? nfs_free_parsed_mount_data+0x60/0x60 [nfs]
mount_fs+0x52/0x170
? __init_waitqueue_head+0x3b/0x50
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on dev_name
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cb6acd01e2 upstream.
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc5422230 ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Not upstream as ncpfs is long deleted.
Fix up two strncpy build warnings in ncp_get_charsets() by using strscpy
and the max size of the array.
It's not like anyone uses this code anyway, and this gets rid of two
build warnings so that we can see real warnings as they pop up over
time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8b9433eb4d ]
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently
not allowed to create blocks for an empty inode. This confusion comes
from trying to bit shift a negative number, so check the size of the
inode first.
The problem is most visible for hfsplus, because the fallback to
buffered I/O doesn't happen and the write fails with EIO. This is in
part the fault of the module, because it gives a wrong return value on
->get_block(); that will be fixed in a separate patch.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b2b469939e upstream.
Tetsuo has reported that creating a thousands of processes sharing MM
without SIGHAND (aka alien threads) and setting
/proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1]
to finish. This is especially worrisome that all that printing is done
under RCU lock and this can potentially trigger RCU stall or softlockup
detector.
The primary reason for the printk was to catch potential users who might
depend on the behavior prior to 44a70adec9 ("mm, oom_adj: make sure
processes sharing mm have same view of oom_score_adj") but after more
than 2 years without a single report I guess it is safe to simply remove
the printk altogether.
The next step should be moving oom_score_adj over to the mm struct and
remove all the tasks crawling as suggested by [2]
[1] http://lkml.kernel.org/r/97fce864-6f75-bca5-14bc-12c9f890e740@i-love.sakura.ne.jp
[2] http://lkml.kernel.org/r/20190117155159.GA4087@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20190212102129.26288-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 848c23b78f upstream.
Commit 4751832da9 ("btrfs: fiemap: Cache and merge fiemap extent before
submit it to user") introduced a warning to catch unemitted cached
fiemap extent.
However such warning doesn't take the following case into consideration:
0 4K 8K
|<---- fiemap range --->|
|<----------- On-disk extent ------------------>|
In this case, the whole 0~8K is cached, and since it's larger than
fiemap range, it break the fiemap extent emit loop.
This leaves the fiemap extent cached but not emitted, and caught by the
final fiemap extent sanity check, causing kernel warning.
This patch removes the kernel warning and renames the sanity check to
emit_last_fiemap_cache() since it's possible and valid to have cached
fiemap extent.
Reported-by: David Sterba <dsterba@suse.cz>
Reported-by: Adam Borowski <kilobyte@angband.pl>
Fixes: 4751832da9 ("btrfs: fiemap: Cache and merge fiemap extent ...")
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 92a8109e4d ]
The code tries to allocate a contiguous buffer with a size supplied by
the server (maxBuf). This could fail if memory is fragmented since it
results in high order allocations for commonly used server
implementations. It is also wasteful since there are probably
few locks in the usual case. Limit the buffer to be no larger than a
page to avoid memory allocation failures due to fragmentation.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cb5b020a8d upstream.
This reverts commit 8099b047ec.
It turns out that people do actually depend on the shebang string being
truncated, and on the fact that an interpreter (like perl) will often
just re-interpret it entirely to get the full argument list.
Reported-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4cd376638c which is
commit 6e785302da upstream.
Yi writes:
I notice that 4.4.169 merged 60da90b224ba7 ("cifs: In Kconfig
CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)") add
a Kconfig dependency CIFS_ALLOW_INSECURE_LEGACY, which was not
defined in 4.4 stable, so after this patch we are not able to
enable CIFS_POSIX anymore. Linux 4.4 stable didn't merge the
legacy dialects codes, so do we really need this patch for 4.4?
So revert this patch in 4.9 as well.
Reported-by: "zhangyi (F)" <yi.zhang@huawei.com>
Cc: Steve French <stfrench@microsoft.com>
Cc: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53da6a53e1 upstream.
The spec allows us to return NFS4ERR_SEQ_FALSE_RETRY if we notice that
the client is making a call that matches a previous (slot, seqid) pair
but that *isn't* actually a replay, because some detail of the call
doesn't actually match the previous one.
Catching every such case is difficult, but we may as well catch a few
easy ones. This also handles the case described in the previous patch,
in a different way.
The spec does however require us to catch the case where the difference
is in the rpc credentials. This prevents somebody from snooping another
user's replies by fabricating retries.
(But the practical value of the attack is limited by the fact that the
replies with the most sensitive data are READ replies, which are not
normally cached.)
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 085def3ade upstream.
Currently our handling of 4.1+ requests without "cachethis" set is
confusing and not quite correct.
Suppose a client sends a compound consisting of only a single SEQUENCE
op, and it matches the seqid in a session slot (so it's a retry), but
the previous request with that seqid did not have "cachethis" set.
The obvious thing to do might be to return NFS4ERR_RETRY_UNCACHED_REP,
but the protocol only allows that to be returned on the op following the
SEQUENCE, and there is no such op in this case.
The protocol permits us to cache replies even if the client didn't ask
us to. And it's easy to do so in the case of solo SEQUENCE compounds.
So, when we get a solo SEQUENCE, we can either return the previously
cached reply or NFSERR_SEQ_FALSE_RETRY if we notice it differs in some
way from the original call.
Currently, we're returning a corrupt reply in the case a solo SEQUENCE
matches a previous compound with more ops. This actually matters
because the Linux client recently started doing this as a way to recover
from lost replies to idempotent operations in the case the process doing
the original reply was killed: in that case it's difficult to keep the
original arguments around to do a real retry, and the client no longer
cares what the result is anyway, but it would like to make sure that the
slot's sequence id has been incremented, and the solo SEQUENCE assures
that: if the server never got the original reply, it will increment the
sequence id. If it did get the original reply, it won't increment, and
nothing else that about the reply really matters much. But we can at
least attempt to return valid xdr!
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d88c93f090 upstream.
debugfs_rename() needs to check that the dentries passed into it really
are valid, as sometimes they are not (i.e. if the return value of
another debugfs call is passed into this one.) So fix this up by
properly checking if the two parent directories are errors (they are
allowed to be NULL), and if the dentry to rename is not NULL or an
error.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2ebba8241 upstream.
NR_WRITEBACK_TEMP is accounted on the temporary page in the request, not
the page cache page.
Fixes: 8b284dc472 ("fuse: writepages: handle same page rewrites")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9509941e9c upstream.
Some of the pipe_buf_release() handlers seem to assume that the pipe is
locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page
without taking any extra locks. From a glance through the callers of
pipe_buf_release(), it looks like FUSE is the only one that calls
pipe_buf_release() without having the pipe locked.
This bug should only lead to a memory leak, nothing terrible.
Fixes: dd3bb14f44 ("fuse: support splice() writing to fuse device")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8099b047ec ]
load_script() simply truncates bprm->buf and this is very wrong if the
length of shebang string exceeds BINPRM_BUF_SIZE-2. This can silently
truncate i_arg or (worse) we can execute the wrong binary if buf[2:126]
happens to be the valid executable path.
Change load_script() to return ENOEXEC if it can't find '\n' or zero in
bprm->buf. Note that '\0' can come from either
prepare_binprm()->memset() or from kernel_read(), we do not care.
Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ben Woodard <woodard@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76699a67f3 ]
The ep->ovflist is a secondary ready-list to temporarily store events
that might occur when doing sproc without holding the ep->wq.lock. This
accounts for every time we check for ready events and also send events
back to userspace; both callbacks, particularly the latter because of
copy_to_user, can account for a non-trivial time.
As such, the unlikely() check to see if the pointer is being used, seems
both misleading and sub-optimal. In fact, we go to an awful lot of
trouble to sync both lists, and populating the ovflist is far from an
uncommon scenario.
For example, profiling a concurrent epoll_wait(2) benchmark, with
CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33%
incorrect rate was seen; and when incrementally increasing the number of
epoll instances (which is used, for example for multiple queuing load
balancing models), up to a 90% incorrect rate was seen.
Similarly, by deleting the prediction, 3% throughput boost was seen
across incremental threads.
Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70306d9dce ]
For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag
and submit the io, second wait io done, last check whether bh uptodate, if
not return io error.
If two sync io for the same bh were issued, it could be the first io done
and set uptodate flag, but just before check that flag, the second io came
in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io
will return IO error.
Indeed it's not necessary to clear uptodate flag, as the io end handler
end_buffer_read_sync() will set or clear it based on io succeed or failed.
The following message was found from a nfs server but the underlying
storage returned no error.
[4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5
[4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5
[4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5
[4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5
[4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5
Same issue in non sync read ocfs2_read_blocks(), fixed it as well.
Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4589fa545 ]
When there is a failure in f2fs_fill_super() after/during
the recovery of fsync'd nodes, it frees the current sbi and
retries again. This time the mount is successful, but the files
that got recovered before retry, still holds the extent tree,
whose extent nodes list is corrupted since sbi and sbi->extent_list
is freed up. The list_del corruption issue is observed when the
file system is getting unmounted and when those recoverd files extent
node is being freed up in the below context.
list_del corruption. prev->next should be fffffff1e1ef5480, but was (null)
<...>
kernel BUG at kernel/msm-4.14/lib/list_debug.c:53!
lr : __list_del_entry_valid+0x94/0xb4
pc : __list_del_entry_valid+0x94/0xb4
<...>
Call trace:
__list_del_entry_valid+0x94/0xb4
__release_extent_node+0xb0/0x114
__free_extent_tree+0x58/0x7c
f2fs_shrink_extent_tree+0xdc/0x3b0
f2fs_leave_shrinker+0x28/0x7c
f2fs_put_super+0xfc/0x1e0
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78
__cleanup_mnt+0x1c/0x28
task_work_run+0x48/0xd0
do_notify_resume+0x678/0xe98
work_pending+0x8/0x14
Fix this by not creating extents for those recovered files if shrinker is
not registered yet. Once mount is successful and shrinker is registered,
those files can have extents again.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59a63e479c ]
RHBZ: 1021460
There is an issue where when multiple threads open/close the same directory
ntwrk_buf_start might end up being NULL, causing the call to smbCalcSize
later to oops with a NULL deref.
The real bug is why this happens and why this can become NULL for an
open cfile, which should not be allowed.
This patch tries to avoid a oops until the time when we fix the underlying
issue.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 594d1644cd ]
This patch removes the check from nfs_compare_mount_options to see if a
`sec' option was passed for the current mount before comparing auth
flavors and instead just always compares auth flavors.
Consider the following scenario:
You have a server with the address 192.168.1.1 and two exports /export/a
and /export/b. The first export supports `sys' and `krb5' security, the
second just `sys'.
Assume you start with no mounts from the server.
The following results in EIOs being returned as the kernel nfs client
incorrectly thinks it can share the underlying `struct nfs_server's:
$ mkdir /tmp/{a,b}
$ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a
$ sudo mount -t nfs -o vers=3 192.168.1.1:/export/b /tmp/b
$ df >/dev/null
df: ‘/tmp/b’: Input/output error
Signed-off-by: Chris Perl <cperl@janestreet.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
