Merge branches 'pm-opp', 'pm-qos', 'acpi-pm', 'pm-domains' and 'pm-tools'

* pm-opp:
  PM / OPP: Correct Documentation about library location
  opp: of: Support multiple suspend OPPs defined in DT
  dt-bindings: opp: Support multiple opp-suspend properties
  opp: core: add regulators enable and disable
  opp: Don't decrement uninitialized list_kref

* pm-qos:
  PM: QoS: Get rid of unused flags

* acpi-pm:
  ACPI: PM: Print debug messages on device power state changes

* pm-domains:
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  PM / Domains: Align in-parameter names for some genpd functions

* pm-tools:
  pm-graph: make setVal unbuffered again for python2 and python3
  cpupower: update German translation
  tools/power/cpupower: fix 64bit detection when cross-compiling
  cpupower: Add missing newline at end of file
  pm-graph v5.5
This commit is contained in:
Rafael J. Wysocki 2019-09-17 09:49:19 +02:00
19 changed files with 634 additions and 584 deletions

View File

@ -140,8 +140,8 @@ Optional properties:
frequency for a short duration of time limited by the device's power, current
and thermal limits.
- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
the table should have this.
- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
in the table have this, the OPP with highest opp-hz will be used.
- opp-supported-hw: This enables us to select only a subset of OPPs from the
larger OPP table, based on what version of the hardware we are running on. We

View File

@ -46,7 +46,7 @@ We can represent these as three OPPs as the following {Hz, uV} tuples:
----------------------------------------
OPP library provides a set of helper functions to organize and query the OPP
information. The library is located in drivers/base/power/opp.c and the header
information. The library is located in drivers/opp/ directory and the header
is located in include/linux/pm_opp.h. OPP library can be enabled by enabling
CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on
CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to

View File

@ -7,8 +7,7 @@ performance expectations by drivers, subsystems and user space applications on
one of the parameters.
Two different PM QoS frameworks are available:
1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput,
memory_bandwidth.
1. PM QoS classes for cpu_dma_latency
2. the per-device PM QoS framework provides the API to manage the per-device latency
constraints and PM QoS flags.
@ -79,7 +78,7 @@ cleanup of a process, the interface requires the process to register its
parameter requests in the following way:
To register the default pm_qos target for the specific parameter, the process
must open one of /dev/[cpu_dma_latency, network_latency, network_throughput]
must open /dev/cpu_dma_latency
As long as the device node is held open that process has a registered
request on the parameter.

View File

@ -166,6 +166,10 @@ int acpi_device_set_power(struct acpi_device *device, int state)
|| (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
return -EINVAL;
acpi_handle_debug(device->handle, "Power state change: %s -> %s\n",
acpi_power_state_string(device->power.state),
acpi_power_state_string(state));
/* Make sure this is a valid target state */
/* There is a special case for D0 addressed below. */

View File

@ -149,29 +149,24 @@ static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev,
return ret;
}
static int genpd_runtime_suspend(struct device *dev);
/*
* Get the generic PM domain for a particular struct device.
* This validates the struct device pointer, the PM domain pointer,
* and checks that the PM domain pointer is a real generic PM domain.
* Any failure results in NULL being returned.
*/
static struct generic_pm_domain *genpd_lookup_dev(struct device *dev)
static struct generic_pm_domain *dev_to_genpd_safe(struct device *dev)
{
struct generic_pm_domain *genpd = NULL, *gpd;
if (IS_ERR_OR_NULL(dev) || IS_ERR_OR_NULL(dev->pm_domain))
return NULL;
mutex_lock(&gpd_list_lock);
list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
if (&gpd->domain == dev->pm_domain) {
genpd = gpd;
break;
}
}
mutex_unlock(&gpd_list_lock);
/* A genpd's always have its ->runtime_suspend() callback assigned. */
if (dev->pm_domain->ops.runtime_suspend == genpd_runtime_suspend)
return pd_to_genpd(dev->pm_domain);
return genpd;
return NULL;
}
/*
@ -385,8 +380,8 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state)
unsigned int prev;
int ret;
genpd = dev_to_genpd(dev);
if (IS_ERR(genpd))
genpd = dev_to_genpd_safe(dev);
if (!genpd)
return -ENODEV;
if (unlikely(!genpd->set_performance_state))
@ -1610,7 +1605,7 @@ static int genpd_remove_device(struct generic_pm_domain *genpd,
*/
int pm_genpd_remove_device(struct device *dev)
{
struct generic_pm_domain *genpd = genpd_lookup_dev(dev);
struct generic_pm_domain *genpd = dev_to_genpd_safe(dev);
if (!genpd)
return -EINVAL;

View File

@ -988,6 +988,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);
INIT_LIST_HEAD(&opp_table->opp_list);
kref_init(&opp_table->kref);
kref_init(&opp_table->list_kref);
/* Secure the device table modification */
list_add(&opp_table->node, &opp_tables);
@ -1625,6 +1626,12 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
goto free_regulators;
}
ret = regulator_enable(reg);
if (ret < 0) {
regulator_put(reg);
goto free_regulators;
}
opp_table->regulators[i] = reg;
}
@ -1638,8 +1645,10 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
return opp_table;
free_regulators:
while (i != 0)
regulator_put(opp_table->regulators[--i]);
while (i--) {
regulator_disable(opp_table->regulators[i]);
regulator_put(opp_table->regulators[i]);
}
kfree(opp_table->regulators);
opp_table->regulators = NULL;
@ -1665,8 +1674,10 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));
for (i = opp_table->regulator_count - 1; i >= 0; i--)
for (i = opp_table->regulator_count - 1; i >= 0; i--) {
regulator_disable(opp_table->regulators[i]);
regulator_put(opp_table->regulators[i]);
}
_free_set_opp_data(opp_table);

View File

@ -617,9 +617,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
/* OPP to select on device suspend */
if (of_property_read_bool(np, "opp-suspend")) {
if (opp_table->suspend_opp) {
dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
__func__, opp_table->suspend_opp->rate,
new_opp->rate);
/* Pick the OPP with higher rate as suspend OPP */
if (new_opp->rate > opp_table->suspend_opp->rate) {
opp_table->suspend_opp->suspend = false;
new_opp->suspend = true;
opp_table->suspend_opp = new_opp;
}
} else {
new_opp->suspend = true;
opp_table->suspend_opp = new_opp;
@ -662,8 +665,6 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
return 0;
}
kref_init(&opp_table->list_kref);
/* We have opp-table node now, iterate over it and add OPPs */
for_each_available_child_of_node(opp_table->np, np) {
opp = _opp_add_static_v2(opp_table, dev, np);
@ -672,17 +673,15 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
ret);
of_node_put(np);
goto put_list_kref;
return ret;
} else if (opp) {
count++;
}
}
/* There should be one of more OPP defined */
if (WARN_ON(!count)) {
ret = -ENOENT;
goto put_list_kref;
}
if (WARN_ON(!count))
return -ENOENT;
list_for_each_entry(opp, &opp_table->opp_list, node)
pstate_count += !!opp->pstate;
@ -691,8 +690,7 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
if (pstate_count && pstate_count != count) {
dev_err(dev, "Not all nodes have performance state set (%d: %d)\n",
count, pstate_count);
ret = -ENOENT;
goto put_list_kref;
return -ENOENT;
}
if (pstate_count)
@ -701,11 +699,6 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
opp_table->parsed_static_opps = true;
return 0;
put_list_kref:
_put_opp_list_kref(opp_table);
return ret;
}
/* Initializes OPP tables based on old-deprecated bindings */
@ -731,8 +724,6 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
return -EINVAL;
}
kref_init(&opp_table->list_kref);
val = prop->value;
while (nr) {
unsigned long freq = be32_to_cpup(val++) * 1000;
@ -742,7 +733,6 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
if (ret) {
dev_err(dev, "%s: Failed to add OPP %ld (%d)\n",
__func__, freq, ret);
_put_opp_list_kref(opp_table);
return ret;
}
nr -= 2;

View File

@ -197,9 +197,9 @@ static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev);
int pm_genpd_remove_device(struct device *dev);
int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *new_subdomain);
struct generic_pm_domain *subdomain);
int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *target);
struct generic_pm_domain *subdomain);
int pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off);
int pm_genpd_remove(struct generic_pm_domain *genpd);
@ -226,12 +226,12 @@ static inline int pm_genpd_remove_device(struct device *dev)
return -ENOSYS;
}
static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *new_sd)
struct generic_pm_domain *subdomain)
{
return -ENOSYS;
}
static inline int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *target)
struct generic_pm_domain *subdomain)
{
return -ENOSYS;
}
@ -282,8 +282,8 @@ int of_genpd_add_provider_onecell(struct device_node *np,
struct genpd_onecell_data *data);
void of_genpd_del_provider(struct device_node *np);
int of_genpd_add_device(struct of_phandle_args *args, struct device *dev);
int of_genpd_add_subdomain(struct of_phandle_args *parent,
struct of_phandle_args *new_subdomain);
int of_genpd_add_subdomain(struct of_phandle_args *parent_spec,
struct of_phandle_args *subdomain_spec);
struct generic_pm_domain *of_genpd_remove_last(struct device_node *np);
int of_genpd_parse_idle_states(struct device_node *dn,
struct genpd_power_state **states, int *n);
@ -316,8 +316,8 @@ static inline int of_genpd_add_device(struct of_phandle_args *args,
return -ENODEV;
}
static inline int of_genpd_add_subdomain(struct of_phandle_args *parent,
struct of_phandle_args *new_subdomain)
static inline int of_genpd_add_subdomain(struct of_phandle_args *parent_spec,
struct of_phandle_args *subdomain_spec)
{
return -ENODEV;
}

View File

@ -13,9 +13,6 @@
enum {
PM_QOS_RESERVED = 0,
PM_QOS_CPU_DMA_LATENCY,
PM_QOS_NETWORK_LATENCY,
PM_QOS_NETWORK_THROUGHPUT,
PM_QOS_MEMORY_BANDWIDTH,
/* insert new class ID */
PM_QOS_NUM_CLASSES,
@ -33,9 +30,6 @@ enum pm_qos_flags_status {
#define PM_QOS_LATENCY_ANY_NS ((s64)PM_QOS_LATENCY_ANY * NSEC_PER_USEC)
#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
#define PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE 0
#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE PM_QOS_LATENCY_ANY
#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT PM_QOS_LATENCY_ANY
#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS PM_QOS_LATENCY_ANY_NS

View File

@ -379,9 +379,7 @@ DECLARE_EVENT_CLASS(pm_qos_request,
TP_printk("pm_qos_class=%s value=%d",
__print_symbolic(__entry->pm_qos_class,
{ PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" },
{ PM_QOS_NETWORK_LATENCY, "NETWORK_LATENCY" },
{ PM_QOS_NETWORK_THROUGHPUT, "NETWORK_THROUGHPUT" }),
{ PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" }),
__entry->value)
);
@ -426,9 +424,7 @@ TRACE_EVENT(pm_qos_update_request_timeout,
TP_printk("pm_qos_class=%s value=%d, timeout_us=%ld",
__print_symbolic(__entry->pm_qos_class,
{ PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" },
{ PM_QOS_NETWORK_LATENCY, "NETWORK_LATENCY" },
{ PM_QOS_NETWORK_THROUGHPUT, "NETWORK_THROUGHPUT" }),
{ PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" }),
__entry->value, __entry->timeout_us)
);

View File

@ -78,57 +78,9 @@ static struct pm_qos_object cpu_dma_pm_qos = {
.name = "cpu_dma_latency",
};
static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
static struct pm_qos_constraints network_lat_constraints = {
.list = PLIST_HEAD_INIT(network_lat_constraints.list),
.target_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
.default_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
.no_constraint_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
.type = PM_QOS_MIN,
.notifiers = &network_lat_notifier,
};
static struct pm_qos_object network_lat_pm_qos = {
.constraints = &network_lat_constraints,
.name = "network_latency",
};
static BLOCKING_NOTIFIER_HEAD(network_throughput_notifier);
static struct pm_qos_constraints network_tput_constraints = {
.list = PLIST_HEAD_INIT(network_tput_constraints.list),
.target_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
.default_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
.no_constraint_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
.type = PM_QOS_MAX,
.notifiers = &network_throughput_notifier,
};
static struct pm_qos_object network_throughput_pm_qos = {
.constraints = &network_tput_constraints,
.name = "network_throughput",
};
static BLOCKING_NOTIFIER_HEAD(memory_bandwidth_notifier);
static struct pm_qos_constraints memory_bw_constraints = {
.list = PLIST_HEAD_INIT(memory_bw_constraints.list),
.target_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
.default_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
.no_constraint_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
.type = PM_QOS_SUM,
.notifiers = &memory_bandwidth_notifier,
};
static struct pm_qos_object memory_bandwidth_pm_qos = {
.constraints = &memory_bw_constraints,
.name = "memory_bandwidth",
};
static struct pm_qos_object *pm_qos_array[] = {
&null_pm_qos,
&cpu_dma_pm_qos,
&network_lat_pm_qos,
&network_throughput_pm_qos,
&memory_bandwidth_pm_qos,
};
static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,

View File

@ -18,7 +18,6 @@ OUTDIR := $(shell cd $(OUTPUT) && pwd)
$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
endif
include ../../scripts/Makefile.arch
# --- CONFIGURATION BEGIN ---
@ -69,11 +68,6 @@ bindir ?= /usr/bin
sbindir ?= /usr/sbin
mandir ?= /usr/man
includedir ?= /usr/include
ifeq ($(IS_64_BIT), 1)
libdir ?= /usr/lib64
else
libdir ?= /usr/lib
endif
localedir ?= /usr/share/locale
docdir ?= /usr/share/doc/packages/cpupower
confdir ?= /etc/
@ -100,6 +94,14 @@ RANLIB = $(CROSS)ranlib
HOSTCC = gcc
MKDIR = mkdir
# 64bit library detection
include ../../scripts/Makefile.arch
ifeq ($(IS_64_BIT), 1)
libdir ?= /usr/lib64
else
libdir ?= /usr/lib
endif
# Now we set up the build system
#

View File

@ -88,4 +88,4 @@ done
echo >> $dir/plot_script.gpl
gnuplot $dir/plot_script.gpl
rm -r $dir
rm -r $dir

View File

@ -85,4 +85,4 @@ function create_plots()
}
measure
create_plots
create_plots

View File

@ -8,66 +8,66 @@ msgstr ""
"Project-Id-Version: cpufrequtils 006\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-03-08 17:03+0100\n"
"PO-Revision-Date: 2009-08-08 17:18+0100\n"
"Last-Translator: <linux@dominikbrodowski.net>\n"
"PO-Revision-Date: 2019-06-02 15:23+0200\n"
"Last-Translator: Benjamin Weis <benjamin.weis@gmx.com>\n"
"Language-Team: NONE\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#: utils/idle_monitor/nhm_idle.c:36
msgid "Processor Core C3"
msgstr ""
msgstr "Prozessorkern C3"
#: utils/idle_monitor/nhm_idle.c:43
msgid "Processor Core C6"
msgstr ""
msgstr "Prozessorkern C6"
#: utils/idle_monitor/nhm_idle.c:51
msgid "Processor Package C3"
msgstr ""
msgstr "Prozessorpaket C3"
#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
msgid "Processor Package C6"
msgstr ""
msgstr "Prozessorpaket C6"
#: utils/idle_monitor/snb_idle.c:33
msgid "Processor Core C7"
msgstr ""
msgstr "Prozessorkern C7"
#: utils/idle_monitor/snb_idle.c:40
msgid "Processor Package C2"
msgstr ""
msgstr "Prozessorpaket C2"
#: utils/idle_monitor/snb_idle.c:47
msgid "Processor Package C7"
msgstr ""
msgstr "Prozessorpaket C7"
#: utils/idle_monitor/amd_fam14h_idle.c:56
msgid "Package in sleep state (PC1 or deeper)"
msgstr ""
msgstr "Paket in Schlafzustand (PC1 oder tiefer)"
#: utils/idle_monitor/amd_fam14h_idle.c:63
msgid "Processor Package C1"
msgstr ""
msgstr "Prozessorpaket C1"
#: utils/idle_monitor/amd_fam14h_idle.c:77
msgid "North Bridge P1 boolean counter (returns 0 or 1)"
msgstr ""
msgstr "North Bridge P1 boolescher Zähler (gibt 0 oder 1 zurück)"
#: utils/idle_monitor/mperf_monitor.c:35
msgid "Processor Core not idle"
msgstr ""
msgstr "Prozessorkern ist nicht im Leerlauf"
#: utils/idle_monitor/mperf_monitor.c:42
msgid "Processor Core in an idle state"
msgstr ""
msgstr "Prozessorkern ist in einem Ruhezustand"
#: utils/idle_monitor/mperf_monitor.c:50
msgid "Average Frequency (including boost) in MHz"
msgstr ""
msgstr "Durchschnittliche Frequenz (einschließlich Boost) in MHz"
#: utils/idle_monitor/cpupower-monitor.c:66
#, c-format
@ -75,6 +75,8 @@ msgid ""
"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""
"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c Befehl ...]\n"
#: utils/idle_monitor/cpupower-monitor.c:69
#, c-format
@ -82,36 +84,40 @@ msgid ""
"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""
"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c Befehl ...]\n"
#: utils/idle_monitor/cpupower-monitor.c:71
#, c-format
msgid "\t -v: be more verbose\n"
msgstr ""
msgstr "\t -v: ausführlicher\n"
#: utils/idle_monitor/cpupower-monitor.c:73
#, c-format
msgid "\t -h: print this help\n"
msgstr ""
msgstr "\t -h: diese Hilfe ausgeben\n"
#: utils/idle_monitor/cpupower-monitor.c:74
#, c-format
msgid "\t -i: time interval to measure for in seconds (default 1)\n"
msgstr ""
msgstr "\t -i: Zeitintervall für die Messung in Sekunden (Standard 1)\n"
#: utils/idle_monitor/cpupower-monitor.c:75
#, c-format
msgid "\t -t: show CPU topology/hierarchy\n"
msgstr ""
msgstr "\t -t: CPU-Topologie/Hierarchie anzeigen\n"
#: utils/idle_monitor/cpupower-monitor.c:76
#, c-format
msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
msgstr ""
"\t -l: verfügbare CPU-Schlafwächter auflisten (für Verwendung mit -m)\n"
#: utils/idle_monitor/cpupower-monitor.c:77
#, c-format
msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
msgstr ""
"\t -m: spezifische CPU-Schlafwächter anzeigen (in gleicher Reihenfolge)\n"
#: utils/idle_monitor/cpupower-monitor.c:79
#, c-format
@ -119,71 +125,73 @@ msgid ""
"only one of: -t, -l, -m are allowed\n"
"If none of them is passed,"
msgstr ""
"nur einer von: -t, -l, -m ist erlaubt\n"
"Wenn keiner von ihnen übergeben wird,"
#: utils/idle_monitor/cpupower-monitor.c:80
#, c-format
msgid " all supported monitors are shown\n"
msgstr ""
msgstr " werden alle unterstützten Wächter angezeigt\n"
#: utils/idle_monitor/cpupower-monitor.c:197
#, c-format
msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
msgstr ""
msgstr "Wächter %s, Zähler %s hat keine Zählfunktion. Implementierungsfehler\n"
#: utils/idle_monitor/cpupower-monitor.c:207
#, c-format
msgid " *is offline\n"
msgstr ""
msgstr " *ist offline\n"
#: utils/idle_monitor/cpupower-monitor.c:236
#, c-format
msgid "%s: max monitor name length (%d) exceeded\n"
msgstr ""
msgstr "%s: max. Wächternamenslänge (%d) überschritten\n"
#: utils/idle_monitor/cpupower-monitor.c:250
#, c-format
msgid "No matching monitor found in %s, try -l option\n"
msgstr ""
msgstr "Kein passender Wächter in %s gefunden, versuchen Sie die Option -l\n"
#: utils/idle_monitor/cpupower-monitor.c:266
#, c-format
msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
msgstr ""
msgstr "Wächter \"%s\" (%d Zustände) - Könnte nach %u s überlaufen\n"
#: utils/idle_monitor/cpupower-monitor.c:319
#, c-format
msgid "%s took %.5f seconds and exited with status %d\n"
msgstr ""
msgstr "%s hat %.5f Sekunden gedauert und hat sich mit Status %d beendet\n"
#: utils/idle_monitor/cpupower-monitor.c:406
#, c-format
msgid "Cannot read number of available processors\n"
msgstr ""
msgstr "Anzahl der verfügbaren Prozessoren kann nicht gelesen werden\n"
#: utils/idle_monitor/cpupower-monitor.c:417
#, c-format
msgid "Available monitor %s needs root access\n"
msgstr ""
msgstr "Verfügbarer Wächter %s benötigt root-Zugriff\n"
#: utils/idle_monitor/cpupower-monitor.c:428
#, c-format
msgid "No HW Cstate monitors found\n"
msgstr ""
msgstr "Keine HW C-Zustandswächter gefunden\n"
#: utils/cpupower.c:78
#, c-format
msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
msgstr ""
msgstr "cpupower [ -c cpulist ] Unterbefehl [ARGS]\n"
#: utils/cpupower.c:79
#, c-format
msgid "cpupower --version\n"
msgstr ""
msgstr "cpupower --version\n"
#: utils/cpupower.c:80
#, c-format
msgid "Supported subcommands are:\n"
msgstr ""
msgstr "Unterstützte Unterbefehle sind:\n"
#: utils/cpupower.c:83
#, c-format
@ -191,11 +199,15 @@ msgid ""
"\n"
"Some subcommands can make use of the -c cpulist option.\n"
msgstr ""
"\n"
"Einige Unterbefehle können die Option -c cpulist verwenden.\n"
#: utils/cpupower.c:84
#, c-format
msgid "Look at the general cpupower manpage how to use it\n"
msgstr ""
"Schauen Sie sich die allgemeine cpupower manpage an, um zu erfahren, wie man "
"es benutzt\n"
#: utils/cpupower.c:85
#, c-format
@ -217,30 +229,31 @@ msgstr "Bitte melden Sie Fehler an %s.\n"
#: utils/cpupower.c:114
#, c-format
msgid "Error parsing cpu list\n"
msgstr ""
msgstr "Fehler beim Parsen der CPU-Liste\n"
#: utils/cpupower.c:172
#, c-format
msgid "Subcommand %s needs root privileges\n"
msgstr ""
msgstr "Unterbefehl %s benötigt root-Rechte\n"
#: utils/cpufreq-info.c:31
#, c-format
msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
msgstr ""
"Konnte nicht die Anzahl der CPUs herausfinden (%s : %s), nehme daher 1 an.\n"
"Anzahl der CPUs konnte nicht herausgefinden werden (%s: %s), es wird daher 1 "
"angenommen\n"
#: utils/cpufreq-info.c:63
#, c-format
msgid ""
" minimum CPU frequency - maximum CPU frequency - governor\n"
msgstr ""
" minimale CPU-Taktfreq. - maximale CPU-Taktfreq. - Regler \n"
msgstr " minimale CPU-Frequenz - maximale CPU-Frequenz - Regler\n"
#: utils/cpufreq-info.c:151
#, c-format
msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
msgstr ""
"Fehler beim Evaluieren der Boost-Fähigkeiten bei CPU %d -- sind Sie root?\n"
#. P state changes via MSR are identified via cpuid 80000007
#. on Intel and AMD, but we assume boost capable machines can do that
@ -250,50 +263,50 @@ msgstr ""
#: utils/cpufreq-info.c:161
#, c-format
msgid " boost state support: \n"
msgstr ""
msgstr " Boost-Zustand-Unterstützung: \n"
#: utils/cpufreq-info.c:163
#, c-format
msgid " Supported: %s\n"
msgstr ""
msgstr " Unterstützt: %s\n"
#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "yes"
msgstr ""
msgstr "ja"
#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "no"
msgstr ""
msgstr "nein"
#: utils/cpufreq-info.c:164
#, fuzzy, c-format
#, c-format
msgid " Active: %s\n"
msgstr " Treiber: %s\n"
msgstr " Aktiv: %s\n"
#: utils/cpufreq-info.c:177
#, c-format
msgid " Boost States: %d\n"
msgstr ""
msgstr " Boost-Zustände: %d\n"
#: utils/cpufreq-info.c:178
#, c-format
msgid " Total States: %d\n"
msgstr ""
msgstr " Gesamtzustände: %d\n"
#: utils/cpufreq-info.c:181
#, c-format
msgid " Pstate-Pb%d: %luMHz (boost state)\n"
msgstr ""
msgstr " Pstate-Pb%d: %luMHz (Boost-Zustand)\n"
#: utils/cpufreq-info.c:184
#, c-format
msgid " Pstate-P%d: %luMHz\n"
msgstr ""
msgstr " Pstate-P%d: %luMHz\n"
#: utils/cpufreq-info.c:211
#, c-format
msgid " no or unknown cpufreq driver is active on this CPU\n"
msgstr " kein oder nicht bestimmbarer cpufreq-Treiber aktiv\n"
msgstr " kein oder ein unbekannter cpufreq-Treiber ist auf dieser CPU aktiv\n"
#: utils/cpufreq-info.c:213
#, c-format
@ -303,12 +316,12 @@ msgstr " Treiber: %s\n"
#: utils/cpufreq-info.c:219
#, c-format
msgid " CPUs which run at the same hardware frequency: "
msgstr " Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: "
msgstr " CPUs, die mit der gleichen Hardwarefrequenz laufen: "
#: utils/cpufreq-info.c:230
#, c-format
msgid " CPUs which need to have their frequency coordinated by software: "
msgstr " Die Taktfrequenz folgender CPUs werden per Software koordiniert: "
msgstr " CPUs, die ihre Frequenz mit Software koordinieren müssen: "
#: utils/cpufreq-info.c:241
#, c-format
@ -318,22 +331,22 @@ msgstr " Maximale Dauer eines Taktfrequenzwechsels: "
#: utils/cpufreq-info.c:247
#, c-format
msgid " hardware limits: "
msgstr " Hardwarebedingte Grenzen der Taktfrequenz: "
msgstr " Hardwarebegrenzungen: "
#: utils/cpufreq-info.c:256
#, c-format
msgid " available frequency steps: "
msgstr " mögliche Taktfrequenzen: "
msgstr " verfügbare Frequenzschritte: "
#: utils/cpufreq-info.c:269
#, c-format
msgid " available cpufreq governors: "
msgstr " mögliche Regler: "
msgstr " verfügbare cpufreq-Regler: "
#: utils/cpufreq-info.c:280
#, c-format
msgid " current policy: frequency should be within "
msgstr " momentane Taktik: die Frequenz soll innerhalb "
msgstr " momentane Richtlinie: Frequenz sollte innerhalb "
#: utils/cpufreq-info.c:282
#, c-format
@ -346,29 +359,28 @@ msgid ""
"The governor \"%s\" may decide which speed to use\n"
" within this range.\n"
msgstr ""
" liegen. Der Regler \"%s\" kann frei entscheiden,\n"
" welche Taktfrequenz innerhalb dieser Grenze verwendet "
"wird.\n"
" sein. Der Regler \"%s\" kann frei entscheiden,\n"
" welche Geschwindigkeit er in diesem Bereich verwendet.\n"
#: utils/cpufreq-info.c:293
#, c-format
msgid " current CPU frequency is "
msgstr " momentane Taktfrequenz ist "
msgstr " momentane CPU-Frequenz ist "
#: utils/cpufreq-info.c:296
#, c-format
msgid " (asserted by call to hardware)"
msgstr " (verifiziert durch Nachfrage bei der Hardware)"
msgstr " (durch Aufruf der Hardware sichergestellt)"
#: utils/cpufreq-info.c:304
#, c-format
msgid " cpufreq stats: "
msgstr " Statistik:"
msgstr " cpufreq-Statistiken: "
#: utils/cpufreq-info.c:472
#, fuzzy, c-format
#, c-format
msgid "Usage: cpupower freqinfo [options]\n"
msgstr "Aufruf: cpufreq-info [Optionen]\n"
msgstr "Aufruf: cpupower freqinfo [Optionen]\n"
#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
@ -377,11 +389,9 @@ msgid "Options:\n"
msgstr "Optionen:\n"
#: utils/cpufreq-info.c:474
#, fuzzy, c-format
#, c-format
msgid " -e, --debug Prints out debug information [default]\n"
msgstr ""
" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n"
" zum Aufspüren von Fehlern\n"
msgstr " -e, --debug Gibt Debug-Informationen aus [Standard]\n"
#: utils/cpufreq-info.c:475
#, c-format
@ -424,7 +434,7 @@ msgstr " -p, --policy Findet die momentane Taktik heraus *\n"
#: utils/cpufreq-info.c:482
#, c-format
msgid " -g, --governors Determines available cpufreq governors *\n"
msgstr " -g, --governors Erzeugt eine Liste mit verfügbaren Reglern *\n"
msgstr " -g, --governors Ermittelt verfügbare cpufreq-Regler *\n"
#: utils/cpufreq-info.c:483
#, c-format
@ -449,8 +459,7 @@ msgstr ""
#: utils/cpufreq-info.c:486
#, c-format
msgid " -s, --stats Shows cpufreq statistics if available\n"
msgstr ""
" -s, --stats Zeigt, sofern möglich, Statistiken über cpufreq an.\n"
msgstr " -s, --stats Zeigt cpufreq-Statistiken an, falls vorhanden\n"
#: utils/cpufreq-info.c:487
#, c-format
@ -464,13 +473,13 @@ msgstr ""
#: utils/cpufreq-info.c:488
#, c-format
msgid " -b, --boost Checks for turbo or boost modes *\n"
msgstr ""
msgstr " -b, --boost Prüft auf Turbo- oder Boost-Modi *\n"
#: utils/cpufreq-info.c:489
#, c-format
msgid ""
" -o, --proc Prints out information like provided by the /proc/"
"cpufreq\n"
" -o, --proc Prints out information like provided by the "
"/proc/cpufreq\n"
" interface in 2.4. and early 2.6. kernels\n"
msgstr ""
" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu "
@ -509,8 +518,8 @@ msgid ""
"For the arguments marked with *, omitting the -c or --cpu argument is\n"
"equivalent to setting it to zero\n"
msgstr ""
"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
"mittels -c oder --cpu etwas anderes angegeben wird\n"
"Für die mit * markierten Argumente ist das Weglassen des Arguments\n"
"-c oder --cpu gleichbedeutend mit der Einstellung auf Null\n"
#: utils/cpufreq-info.c:580
#, c-format
@ -525,8 +534,8 @@ msgid ""
"You can't specify more than one --cpu parameter and/or\n"
"more than one output-specific argument\n"
msgstr ""
"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
"informationsspezifischen Parameter gleichzeitig angeben\n"
"Sie können nicht mehr als einen Parameter --cpu und/oder\n"
"mehr als ein ausgabespezifisches Argument angeben\n"
#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
@ -538,17 +547,17 @@ msgstr "unbekannter oder falscher Parameter\n"
#, c-format
msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
msgstr ""
"Konnte nicht die CPU %d analysieren, da sie (scheinbar?) nicht existiert.\n"
"CPU %d konnte nicht analysiert werden, da sie scheinbar nicht existiert\n"
#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
#, c-format
msgid "analyzing CPU %d:\n"
msgstr "analysiere CPU %d:\n"
msgstr "CPU %d wird analysiert:\n"
#: utils/cpufreq-set.c:25
#, fuzzy, c-format
#, c-format
msgid "Usage: cpupower frequency-set [options]\n"
msgstr "Aufruf: cpufreq-set [Optionen]\n"
msgstr "Aufruf: cpupower frequency-set [Optionen]\n"
#: utils/cpufreq-set.c:27
#, c-format
@ -556,7 +565,7 @@ msgid ""
" -d FREQ, --min FREQ new minimum CPU frequency the governor may "
"select\n"
msgstr ""
" -d FREQ, --min FREQ neue minimale Taktfrequenz, die der Regler\n"
" -d FREQ, --min FREQ neue minimale CPU-Frequenz, die der Regler\n"
" auswählen darf\n"
#: utils/cpufreq-set.c:28
@ -571,7 +580,7 @@ msgstr ""
#: utils/cpufreq-set.c:29
#, c-format
msgid " -g GOV, --governor GOV new cpufreq governor\n"
msgstr " -g GOV, --governors GOV wechsle zu Regler GOV\n"
msgstr " -g GOV, --governors GOV neuer cpufreq-Regler\n"
#: utils/cpufreq-set.c:30
#, c-format
@ -579,29 +588,29 @@ msgid ""
" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n"
" governor to be available and loaded\n"
msgstr ""
" -f FREQ, --freq FREQ setze exakte Taktfrequenz. Benötigt den Regler\n"
" 'userspace'.\n"
" -f FREQ, --freq FREQ bestimmte Frequenz, die eingestellt werden soll.\n"
" Erfordert einen verfügbaren und geladenen "
"userspace-Regler\n"
#: utils/cpufreq-set.c:32
#, c-format
msgid " -r, --related Switches all hardware-related CPUs\n"
msgstr ""
" -r, --related Setze Werte für alle CPUs, deren Taktfrequenz\n"
" hardwarebedingt identisch ist.\n"
msgstr " -r, --related Schaltet alle hardwarebezogenen CPUs um\n"
#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
#, c-format
msgid " -h, --help Prints out this screen\n"
msgstr " -h, --help Gibt diese Kurzübersicht aus\n"
msgstr " -h, --help Gibt diesen Bildschirm aus\n"
#: utils/cpufreq-set.c:35
#, fuzzy, c-format
#, c-format
msgid ""
"Notes:\n"
"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
msgstr ""
"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
"mittels -c oder --cpu etwas anderes angegeben wird\n"
"Hinweis:\n"
"1. Das Weglassen des Arguments -c oder --cpu ist gleichbedeutend mit der "
"Einstellung auf \"all\"\n"
#: utils/cpufreq-set.c:37
#, fuzzy, c-format
@ -636,17 +645,21 @@ msgid ""
"frequency\n"
" or because the userspace governor isn't loaded?\n"
msgstr ""
"Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n"
"- nicht ausreichende Rechte (Administrator)\n"
"- der Regler ist nicht verfügbar bzw. nicht geladen\n"
"- die angegebene Taktik ist inkorrekt\n"
"- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n"
" kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n"
"Fehler beim Festlegen neuer Werte. Häufige Fehler:\n"
"- Verfügen Sie über die erforderlichen Administrationsrechte? (Superuser?)\n"
"- Ist der von Ihnen gewünschte Regler verfügbar und mittels modprobe "
"geladen?\n"
"- Versuchen Sie eine ungültige Richtlinie festzulegen?\n"
"- Versuchen Sie eine bestimmte Frequenz festzulegen, aber der "
"userspace-Regler ist nicht verfügbar,\n"
" z.B. wegen Hardware, die nicht auf eine bestimmte Frequenz eingestellt "
"werden kann\n"
" oder weil der userspace-Regler nicht geladen ist?\n"
#: utils/cpufreq-set.c:170
#, c-format
msgid "wrong, unknown or unhandled CPU?\n"
msgstr "unbekannte oder nicht regelbare CPU\n"
msgstr "falsche, unbekannte oder nicht regelbare CPU?\n"
#: utils/cpufreq-set.c:302
#, c-format
@ -654,8 +667,8 @@ msgid ""
"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
"-g/--governor parameters\n"
msgstr ""
"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, -u/--"
"max\n"
"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, "
"-u/--max\n"
"oder -g/--governor kombiniert werden\n"
#: utils/cpufreq-set.c:308
@ -664,18 +677,18 @@ msgid ""
"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
"-g/--governor must be passed\n"
msgstr ""
"Es muss mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max oder\n"
"-g/--governor angegeben werden.\n"
"Mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max und\n"
"-g/--governor muss übergeben werden\n"
#: utils/cpufreq-set.c:347
#, c-format
msgid "Setting cpu: %d\n"
msgstr ""
msgstr "CPU einstellen: %d\n"
#: utils/cpupower-set.c:22
#, c-format
msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
msgstr ""
msgstr "Aufruf: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
#: utils/cpupower-set.c:24
#, c-format
@ -689,6 +702,8 @@ msgstr ""
msgid ""
" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n"
msgstr ""
" -m, --sched-mc [VAL] Legt die Mehrkern-Scheduler-Richtlinie des "
"Kernels fest.\n"
#: utils/cpupower-set.c:27
#, c-format
@ -700,37 +715,37 @@ msgstr ""
#: utils/cpupower-set.c:80
#, c-format
msgid "--perf-bias param out of range [0-%d]\n"
msgstr ""
msgstr "--perf-bias-Parameter außerhalb des Bereichs [0-%d]\n"
#: utils/cpupower-set.c:91
#, c-format
msgid "--sched-mc param out of range [0-%d]\n"
msgstr ""
msgstr "Parameter --sched-mc außerhalb des Bereichs [0-%d]\n"
#: utils/cpupower-set.c:102
#, c-format
msgid "--sched-smt param out of range [0-%d]\n"
msgstr ""
msgstr "Parameter --sched-smt außerhalb des Bereichs [0-%d]\n"
#: utils/cpupower-set.c:121
#, c-format
msgid "Error setting sched-mc %s\n"
msgstr ""
msgstr "Fehler beim Einstellen von sched-mc %s\n"
#: utils/cpupower-set.c:127
#, c-format
msgid "Error setting sched-smt %s\n"
msgstr ""
msgstr "Fehler beim Einstellen von sched-smt %s\n"
#: utils/cpupower-set.c:146
#, c-format
msgid "Error setting perf-bias value on CPU %d\n"
msgstr ""
msgstr "Fehler beim Einstellen des perf-bias-Wertes auf der CPU %d\n"
#: utils/cpupower-info.c:21
#, c-format
msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
msgstr ""
msgstr "Aufruf: cpupower info [ -b ] [ -m ] [ -s ]\n"
#: utils/cpupower-info.c:23
#, c-format
@ -740,9 +755,10 @@ msgid ""
msgstr ""
#: utils/cpupower-info.c:25
#, fuzzy, c-format
#, c-format
msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n"
msgstr " -p, --policy Findet die momentane Taktik heraus *\n"
msgstr ""
" -m, --sched-mc Ruft die Mehrkern-Scheduler-Richtlinie des Kernels ab.\n"
#: utils/cpupower-info.c:26
#, c-format
@ -756,17 +772,20 @@ msgid ""
"\n"
"Passing no option will show all info, by default only on core 0\n"
msgstr ""
"\n"
"Wenn Sie keine Option übergeben, werden alle Informationen angezeigt, "
"standardmäßig nur auf Kern 0\n"
#: utils/cpupower-info.c:102
#, c-format
msgid "System's multi core scheduler setting: "
msgstr ""
msgstr "Mehrkern-Scheduler-Einstellung des Systems: "
#. if sysfs file is missing it's: errno == ENOENT
#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
#, c-format
msgid "not supported\n"
msgstr ""
msgstr "nicht unterstützt\n"
#: utils/cpupower-info.c:111
#, c-format
@ -786,164 +805,161 @@ msgstr ""
#: utils/cpupower-info.c:147
#, c-format
msgid "Could not read perf-bias value\n"
msgstr ""
msgstr "perf-bias-Wert konnte nicht gelesen werden\n"
#: utils/cpupower-info.c:150
#, c-format
msgid "perf-bias: %d\n"
msgstr ""
msgstr "perf-bias: %d\n"
#: utils/cpuidle-info.c:28
#, fuzzy, c-format
#, c-format
msgid "Analyzing CPU %d:\n"
msgstr "analysiere CPU %d:\n"
msgstr "CPU %d wird analysiert:\n"
#: utils/cpuidle-info.c:32
#, c-format
msgid "CPU %u: No idle states\n"
msgstr ""
msgstr "CPU %u: Keine Ruhezustände\n"
#: utils/cpuidle-info.c:36
#, c-format
msgid "CPU %u: Can't read idle state info\n"
msgstr ""
msgstr "CPU %u: Ruhezustands-Informationen können nicht gelesen werden\n"
#: utils/cpuidle-info.c:41
#, c-format
msgid "Could not determine max idle state %u\n"
msgstr ""
msgstr "Max. Ruhezustand %u konnte nicht bestimmt werden\n"
#: utils/cpuidle-info.c:46
#, c-format
msgid "Number of idle states: %d\n"
msgstr ""
msgstr "Anzahl der Ruhezustände: %d\n"
#: utils/cpuidle-info.c:48
#, fuzzy, c-format
#, c-format
msgid "Available idle states:"
msgstr " mögliche Taktfrequenzen: "
msgstr "Verfügbare Ruhezustände:"
#: utils/cpuidle-info.c:71
#, c-format
msgid "Flags/Description: %s\n"
msgstr ""
msgstr "Merker/Beschreibung: %s\n"
#: utils/cpuidle-info.c:74
#, c-format
msgid "Latency: %lu\n"
msgstr ""
msgstr "Latenz: %lu\n"
#: utils/cpuidle-info.c:76
#, c-format
msgid "Usage: %lu\n"
msgstr ""
msgstr "Aufruf: %lu\n"
#: utils/cpuidle-info.c:78
#, c-format
msgid "Duration: %llu\n"
msgstr ""
msgstr "Dauer: %llu\n"
#: utils/cpuidle-info.c:90
#, c-format
msgid "Could not determine cpuidle driver\n"
msgstr ""
msgstr "cpuidle-Treiber konnte nicht bestimmt werden\n"
#: utils/cpuidle-info.c:94
#, fuzzy, c-format
#, c-format
msgid "CPUidle driver: %s\n"
msgstr " Treiber: %s\n"
msgstr "CPUidle-Treiber: %s\n"
#: utils/cpuidle-info.c:99
#, c-format
msgid "Could not determine cpuidle governor\n"
msgstr ""
msgstr "cpuidle-Regler konnte nicht bestimmt werden\n"
#: utils/cpuidle-info.c:103
#, c-format
msgid "CPUidle governor: %s\n"
msgstr ""
msgstr "CPUidle-Regler: %s\n"
#: utils/cpuidle-info.c:122
#, c-format
msgid "CPU %u: Can't read C-state info\n"
msgstr ""
msgstr "CPU %u: C-Zustands-Informationen können nicht gelesen werden\n"
#. printf("Cstates: %d\n", cstates);
#: utils/cpuidle-info.c:127
#, c-format
msgid "active state: C0\n"
msgstr ""
msgstr "aktiver Zustand: C0\n"
#: utils/cpuidle-info.c:128
#, c-format
msgid "max_cstate: C%u\n"
msgstr ""
msgstr "max_cstate: C%u\n"
#: utils/cpuidle-info.c:129
#, fuzzy, c-format
#, c-format
msgid "maximum allowed latency: %lu usec\n"
msgstr " Maximale Dauer eines Taktfrequenzwechsels: "
msgstr "maximal erlaubte Latenz: %lu usec\n"
#: utils/cpuidle-info.c:130
#, c-format
msgid "states:\t\n"
msgstr ""
msgstr "Zustände:\t\n"
#: utils/cpuidle-info.c:132
#, c-format
msgid " C%d: type[C%d] "
msgstr ""
msgstr " C%d: Typ[C%d] "
#: utils/cpuidle-info.c:134
#, c-format
msgid "promotion[--] demotion[--] "
msgstr ""
msgstr "promotion[--] demotion[--] "
#: utils/cpuidle-info.c:135
#, c-format
msgid "latency[%03lu] "
msgstr ""
msgstr "Latenz[%03lu] "
#: utils/cpuidle-info.c:137
#, c-format
msgid "usage[%08lu] "
msgstr ""
msgstr "Aufruf[%08lu] "
#: utils/cpuidle-info.c:139
#, c-format
msgid "duration[%020Lu] \n"
msgstr ""
msgstr "Dauer[%020Lu] \n"
#: utils/cpuidle-info.c:147
#, fuzzy, c-format
#, c-format
msgid "Usage: cpupower idleinfo [options]\n"
msgstr "Aufruf: cpufreq-info [Optionen]\n"
msgstr "Aufruf: cpupower idleinfo [Optionen]\n"
#: utils/cpuidle-info.c:149
#, fuzzy, c-format
#, c-format
msgid " -s, --silent Only show general C-state information\n"
msgstr ""
" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n"
" zum Aufspüren von Fehlern\n"
" -s, --silent Nur allgemeine C-Zustands-Informationen anzeigen\n"
#: utils/cpuidle-info.c:150
#, fuzzy, c-format
#, c-format
msgid ""
" -o, --proc Prints out information like provided by the /proc/"
"acpi/processor/*/power\n"
" -o, --proc Prints out information like provided by the "
"/proc/acpi/processor/*/power\n"
" interface in older kernels\n"
msgstr ""
" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu "
"dem\n"
" der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n"
" Kernel-Versionen\n"
" -o, --proc Gibt Informationen so aus, wie sie von der "
"Schnittstelle\n"
" /proc/acpi/processor/*/power in älteren Kerneln "
"bereitgestellt werden\n"
#: utils/cpuidle-info.c:209
#, fuzzy, c-format
#, c-format
msgid "You can't specify more than one output-specific argument\n"
msgstr ""
"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
"informationsspezifischen Parameter gleichzeitig angeben\n"
msgstr "Sie können nicht mehr als ein ausgabenspezifisches Argument angeben\n"
#~ msgid ""
#~ " -c CPU, --cpu CPU CPU number which information shall be determined "
@ -956,6 +972,6 @@ msgstr ""
#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be "
#~ "modified\n"
#~ msgstr ""
#~ " -c CPU, --cpu CPU Nummer der CPU, deren Taktfrequenz-"
#~ "Einstellung\n"
#~ " -c CPU, --cpu CPU Nummer der CPU, deren "
#~ "Taktfrequenz-Einstellung\n"
#~ " werden soll\n"

View File

@ -1,7 +1,7 @@
p m - g r a p h
pm-graph: suspend/resume/boot timing analysis tools
Version: 5.4
Version: 5.5
Author: Todd Brandt <todd.e.brandt@intel.com>
Home Page: https://01.org/pm-graph
@ -18,6 +18,10 @@
- upstream version in git:
https://github.com/intel/pm-graph/
Requirements:
- runs with python2 or python3, choice is made by /usr/bin/python link
- python2 now requires python-configparser be installed
Table of Contents
- Overview
- Setup

View File

@ -1,9 +1,18 @@
#!/usr/bin/python2
#!/usr/bin/python
# SPDX-License-Identifier: GPL-2.0-only
#
# Tool for analyzing boot timing
# Copyright (c) 2013, Intel Corporation.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# Authors:
# Todd Brandt <todd.e.brandt@linux.intel.com>
#
@ -81,7 +90,7 @@ class SystemValues(aslib.SystemValues):
cmdline = 'initcall_debug log_buf_len=32M'
if self.useftrace:
if self.cpucount > 0:
bs = min(self.memtotal / 2, 2*1024*1024) / self.cpucount
bs = min(self.memtotal // 2, 2*1024*1024) // self.cpucount
else:
bs = 131072
cmdline += ' trace_buf_size=%dK trace_clock=global '\
@ -137,13 +146,13 @@ class SystemValues(aslib.SystemValues):
if arg in ['-h', '-v', '-cronjob', '-reboot', '-verbose']:
continue
elif arg in ['-o', '-dmesg', '-ftrace', '-func']:
args.next()
next(args)
continue
elif arg == '-result':
cmdline += ' %s "%s"' % (arg, os.path.abspath(args.next()))
cmdline += ' %s "%s"' % (arg, os.path.abspath(next(args)))
continue
elif arg == '-cgskip':
file = self.configFile(args.next())
file = self.configFile(next(args))
cmdline += ' %s "%s"' % (arg, os.path.abspath(file))
continue
cmdline += ' '+arg
@ -292,11 +301,11 @@ def parseKernelLog():
tp = aslib.TestProps()
devtemp = dict()
if(sysvals.dmesgfile):
lf = open(sysvals.dmesgfile, 'r')
lf = open(sysvals.dmesgfile, 'rb')
else:
lf = Popen('dmesg', stdout=PIPE).stdout
for line in lf:
line = line.replace('\r\n', '')
line = aslib.ascii(line).replace('\r\n', '')
# grab the stamp and sysinfo
if re.match(tp.stampfmt, line):
tp.stamp = line
@ -649,7 +658,7 @@ def createBootGraph(data):
statinfo += '\t"%s": [\n\t\t"%s",\n' % (n, devstats[n]['info'])
if 'fstat' in devstats[n]:
funcs = devstats[n]['fstat']
for f in sorted(funcs, key=funcs.get, reverse=True):
for f in sorted(funcs, key=lambda k:(funcs[k], k), reverse=True):
if funcs[f][0] < 0.01 and len(funcs) > 10:
break
statinfo += '\t\t"%f|%s|%d",\n' % (funcs[f][0], f, funcs[f][1])
@ -729,7 +738,7 @@ def updateCron(restore=False):
op.write('@reboot python %s\n' % sysvals.cronjobCmdString())
op.close()
res = call([cmd, cronfile])
except Exception, e:
except Exception as e:
pprint('Exception: %s' % str(e))
shutil.move(backfile, cronfile)
res = -1
@ -745,7 +754,7 @@ def updateGrub(restore=False):
try:
call(sysvals.blexec, stderr=PIPE, stdout=PIPE,
env={'PATH': '.:/sbin:/usr/sbin:/usr/bin:/sbin:/bin'})
except Exception, e:
except Exception as e:
pprint('Exception: %s\n' % str(e))
return
# extract the option and create a grub config without it
@ -792,7 +801,7 @@ def updateGrub(restore=False):
op.close()
res = call(sysvals.blexec)
os.remove(grubfile)
except Exception, e:
except Exception as e:
pprint('Exception: %s' % str(e))
res = -1
# cleanup
@ -866,6 +875,7 @@ def printHelp():
'Other commands:\n'\
' -flistall Print all functions capable of being captured in ftrace\n'\
' -sysinfo Print out system info extracted from BIOS\n'\
' -which exec Print an executable path, should function even without PATH\n'\
' [redo]\n'\
' -dmesg file Create HTML output using dmesg input (used with -ftrace)\n'\
' -ftrace file Create HTML output using ftrace input (used with -dmesg)\n'\
@ -907,13 +917,13 @@ if __name__ == '__main__':
sysvals.mincglen = aslib.getArgFloat('-mincg', args, 0.0, 10000.0)
elif(arg == '-cgfilter'):
try:
val = args.next()
val = next(args)
except:
doError('No callgraph functions supplied', True)
sysvals.setCallgraphFilter(val)
elif(arg == '-cgskip'):
try:
val = args.next()
val = next(args)
except:
doError('No file supplied', True)
if val.lower() in switchoff:
@ -924,7 +934,7 @@ if __name__ == '__main__':
doError('%s does not exist' % cgskip)
elif(arg == '-bl'):
try:
val = args.next()
val = next(args)
except:
doError('No boot loader name supplied', True)
if val.lower() not in ['grub']:
@ -937,7 +947,7 @@ if __name__ == '__main__':
sysvals.max_graph_depth = aslib.getArgInt('-maxdepth', args, 0, 1000)
elif(arg == '-func'):
try:
val = args.next()
val = next(args)
except:
doError('No filter functions supplied', True)
sysvals.useftrace = True
@ -946,7 +956,7 @@ if __name__ == '__main__':
sysvals.setGraphFilter(val)
elif(arg == '-ftrace'):
try:
val = args.next()
val = next(args)
except:
doError('No ftrace file supplied', True)
if(os.path.exists(val) == False):
@ -959,7 +969,7 @@ if __name__ == '__main__':
sysvals.cgexp = True
elif(arg == '-dmesg'):
try:
val = args.next()
val = next(args)
except:
doError('No dmesg file supplied', True)
if(os.path.exists(val) == False):
@ -968,13 +978,13 @@ if __name__ == '__main__':
sysvals.dmesgfile = val
elif(arg == '-o'):
try:
val = args.next()
val = next(args)
except:
doError('No subdirectory name supplied', True)
sysvals.testdir = sysvals.setOutputFolder(val)
elif(arg == '-result'):
try:
val = args.next()
val = next(args)
except:
doError('No result file supplied', True)
sysvals.result = val
@ -986,6 +996,17 @@ if __name__ == '__main__':
# remaining options are only for cron job use
elif(arg == '-cronjob'):
sysvals.iscronjob = True
elif(arg == '-which'):
try:
val = next(args)
except:
doError('No executable supplied', True)
out = sysvals.getExec(val)
if not out:
print('%s not found' % val)
sys.exit(1)
print(out)
sys.exit(0)
else:
doError('Invalid argument: '+arg, True)

View File

@ -53,10 +53,10 @@ disable rtcwake and require a user keypress to resume.
Add the dmesg and ftrace logs to the html output. They will be viewable by
clicking buttons in the timeline.
.TP
\fB-turbostat\fR
Use turbostat to execute the command in freeze mode (default: disabled). This
will provide turbostat output in the log which will tell you which actual
power modes were entered.
\fB-noturbostat\fR
By default, if turbostat is found and the requested mode is freeze, sleepgraph
will execute the suspend via turbostat and collect data in the timeline log.
This option disables the use of turbostat.
.TP
\fB-result \fIfile\fR
Export a results table to a text file for parsing.

File diff suppressed because it is too large Load Diff