mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 23:36:23 +09:00
ia64: remove the hpsim platform
The hpsim platform supports the HP IA64 simulator which was useful as a bring up platform. But it is fairly non-standard vs real IA64 system in that it for example doesn't support ACPI. It also comes with a whole bunch of simulator specific drivers. Remove it to simplify the IA64 port. Note that through a weird twist only them hpsim boot loader built the vmlinux.gz file, so the makefile targets for that are moved to the main ia64 Makefile now. Acked-by: Tom Vaden <tom.vaden@hpe.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-18-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
This commit is contained in:
Christoph Hellwig
Tony Luck
parent
05933aac7b
commit
fc5bad0370
|
|
@ -10,11 +10,11 @@ config IA64
|
|||
bool
|
||||
select ARCH_MIGHT_HAVE_PC_PARPORT
|
||||
select ARCH_MIGHT_HAVE_PC_SERIO
|
||||
select ACPI if (!IA64_HP_SIM)
|
||||
select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM)
|
||||
select ACPI
|
||||
select ARCH_SUPPORTS_ACPI
|
||||
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
|
||||
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
|
||||
select FORCE_PCI if (!IA64_HP_SIM)
|
||||
select FORCE_PCI
|
||||
select PCI_DOMAINS if PCI
|
||||
select PCI_SYSCALL if PCI
|
||||
select HAVE_UNSTABLE_SCHED_CLOCK
|
||||
|
|
@ -140,7 +140,6 @@ config IA64_GENERIC
|
|||
HP-zx1/sx1000 For HP systems
|
||||
HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
|
||||
SGI-UV For SGI UV systems
|
||||
Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
|
||||
|
||||
If you don't know what to do, choose "generic".
|
||||
|
||||
|
|
@ -181,11 +180,6 @@ config IA64_SGI_UV
|
|||
to select this option. If in doubt, select ia64 generic support
|
||||
instead.
|
||||
|
||||
config IA64_HP_SIM
|
||||
bool "Ski-simulator"
|
||||
select SWIOTLB
|
||||
depends on !PM
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
|
|
@ -239,14 +233,7 @@ config IA64_PAGE_SIZE_64KB
|
|||
|
||||
endchoice
|
||||
|
||||
if IA64_HP_SIM
|
||||
config HZ
|
||||
default 32
|
||||
endif
|
||||
|
||||
if !IA64_HP_SIM
|
||||
source "kernel/Kconfig.hz"
|
||||
endif
|
||||
|
||||
config IA64_BRL_EMU
|
||||
bool
|
||||
|
|
@ -265,11 +252,6 @@ config IA64_CYCLONE
|
|||
Say Y here to enable support for IBM EXA Cyclone time source.
|
||||
If you're unsure, answer N.
|
||||
|
||||
config IOSAPIC
|
||||
bool
|
||||
depends on !IA64_HP_SIM
|
||||
default y
|
||||
|
||||
config FORCE_MAX_ZONEORDER
|
||||
int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
|
||||
range 11 17 if !HUGETLB_PAGE
|
||||
|
|
@ -373,7 +355,7 @@ config ARCH_DISCONTIGMEM_DEFAULT
|
|||
|
||||
config NUMA
|
||||
bool "NUMA support"
|
||||
depends on !IA64_HP_SIM && !FLATMEM
|
||||
depends on !FLATMEM
|
||||
select ACPI_NUMA if ACPI
|
||||
help
|
||||
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
|
||||
|
|
@ -395,7 +377,7 @@ config NODES_SHIFT
|
|||
config VIRTUAL_MEM_MAP
|
||||
bool "Virtual mem map"
|
||||
depends on !SPARSEMEM
|
||||
default y if !IA64_HP_SIM
|
||||
default y
|
||||
help
|
||||
Say Y to compile the kernel with support for a virtual mem map.
|
||||
This code also only takes effect if a memory hole of greater than
|
||||
|
|
@ -478,7 +460,7 @@ config IA64_HP_AML_NFW
|
|||
|
||||
config KEXEC
|
||||
bool "kexec system call"
|
||||
depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
|
||||
depends on !SMP || HOTPLUG_CPU
|
||||
select KEXEC_CORE
|
||||
help
|
||||
kexec is a system call that implements the ability to shutdown your
|
||||
|
|
@ -496,7 +478,7 @@ config KEXEC
|
|||
|
||||
config CRASH_DUMP
|
||||
bool "kernel crash dumps"
|
||||
depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
|
||||
depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU)
|
||||
help
|
||||
Generate crash dump after being started by kexec.
|
||||
|
||||
|
|
@ -518,8 +500,6 @@ endif
|
|||
|
||||
endmenu
|
||||
|
||||
source "arch/ia64/hp/sim/Kconfig"
|
||||
|
||||
config MSPEC
|
||||
tristate "Memory special operations driver"
|
||||
depends on IA64
|
||||
|
|
|
|||
|
|
@ -39,6 +39,12 @@ $(error Sorry, you need a newer version of the assember, one that is built from
|
|||
ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
|
||||
endif
|
||||
|
||||
quiet_cmd_gzip = GZIP $@
|
||||
cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@
|
||||
|
||||
quiet_cmd_objcopy = OBJCOPY $@
|
||||
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
|
||||
|
||||
KBUILD_CFLAGS += $(cflags-y)
|
||||
head-y := arch/ia64/kernel/head.o
|
||||
|
||||
|
|
@ -52,15 +58,12 @@ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
|
|||
core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/
|
||||
|
||||
drivers-$(CONFIG_PCI) += arch/ia64/pci/
|
||||
drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/
|
||||
drivers-$(CONFIG_IA64_HP_ZX1) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
|
||||
drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
|
||||
drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/uv/
|
||||
drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/uv/
|
||||
drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
|
||||
|
||||
boot := arch/ia64/hp/sim/boot
|
||||
|
||||
PHONY += boot compressed check
|
||||
PHONY += compressed check
|
||||
|
||||
all: compressed unwcheck
|
||||
|
||||
|
|
@ -68,22 +71,21 @@ compressed: vmlinux.gz
|
|||
|
||||
vmlinuz: vmlinux.gz
|
||||
|
||||
vmlinux.gz: vmlinux
|
||||
$(Q)$(MAKE) $(build)=$(boot) $@
|
||||
vmlinux.gz: vmlinux.bin FORCE
|
||||
$(call if_changed,gzip)
|
||||
|
||||
vmlinux.bin: vmlinux FORCE
|
||||
$(call if_changed,objcopy)
|
||||
|
||||
unwcheck: vmlinux
|
||||
-$(Q)READELF=$(READELF) $(PYTHON) $(srctree)/arch/ia64/scripts/unwcheck.py $<
|
||||
|
||||
archclean:
|
||||
$(Q)$(MAKE) $(clean)=$(boot)
|
||||
|
||||
archheaders:
|
||||
$(Q)$(MAKE) $(build)=arch/ia64/kernel/syscalls all
|
||||
|
||||
CLEAN_FILES += vmlinux.gz bootloader
|
||||
|
||||
boot: lib/lib.a vmlinux
|
||||
$(Q)$(MAKE) $(build)=$(boot) $@
|
||||
CLEAN_FILES += vmlinux.gz
|
||||
|
||||
install: vmlinux.gz
|
||||
sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
|
||||
|
|
@ -91,7 +93,6 @@ install: vmlinux.gz
|
|||
define archhelp
|
||||
echo '* compressed - Build compressed kernel image'
|
||||
echo ' install - Install compressed kernel image'
|
||||
echo ' boot - Build vmlinux and bootloader for Ski simulator'
|
||||
echo '* unwcheck - Check vmlinux for invalid unwind info'
|
||||
endef
|
||||
|
||||
|
|
|
|||
|
|
@ -1,52 +0,0 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_IA64_HP_SIM=y
|
||||
CONFIG_MCKINLEY=y
|
||||
CONFIG_IA64_PAGE_SIZE_64KB=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_NR_CPUS=64
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_IA64_PALINFO=m
|
||||
CONFIG_EFI_VARS=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_STANDALONE is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_SCSI_CONSTANTS=y
|
||||
CONFIG_SCSI_LOGGING=y
|
||||
CONFIG_SCSI_SPI_ATTRS=y
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_EFI_RTC=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_HP_SIMETH=y
|
||||
CONFIG_HP_SIMSERIAL=y
|
||||
CONFIG_HP_SIMSERIAL_CONSOLE=y
|
||||
CONFIG_HP_SIMSCSI=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_HUGETLBFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFSD=y
|
||||
CONFIG_NFSD_V3=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_MUTEXES=y
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
menu "HP Simulator drivers"
|
||||
depends on IA64_HP_SIM || IA64_GENERIC
|
||||
|
||||
config HP_SIMETH
|
||||
bool "Simulated Ethernet "
|
||||
depends on NET
|
||||
|
||||
config HP_SIMSERIAL
|
||||
bool "Simulated serial driver support"
|
||||
depends on TTY
|
||||
|
||||
config HP_SIMSERIAL_CONSOLE
|
||||
bool "Console for HP simulator"
|
||||
depends on HP_SIMSERIAL
|
||||
|
||||
config HP_SIMSCSI
|
||||
bool "Simulated SCSI disk"
|
||||
depends on SCSI=y
|
||||
|
||||
endmenu
|
||||
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
#
|
||||
# ia64/platform/hp/sim/Makefile
|
||||
#
|
||||
# Copyright (C) 2002 Hewlett-Packard Co.
|
||||
# David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
# Copyright (C) 1999 Silicon Graphics, Inc.
|
||||
# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
|
||||
#
|
||||
|
||||
obj-y := hpsim_irq.o hpsim_setup.o hpsim.o
|
||||
obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
|
||||
|
||||
obj-$(CONFIG_HP_SIMETH) += simeth.o
|
||||
obj-$(CONFIG_HP_SIMSERIAL) += simserial.o
|
||||
obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o
|
||||
obj-$(CONFIG_HP_SIMSCSI) += simscsi.o
|
||||
|
|
@ -1,37 +0,0 @@
|
|||
#
|
||||
# ia64/boot/Makefile
|
||||
#
|
||||
# This file is subject to the terms and conditions of the GNU General Public
|
||||
# License. See the file "COPYING" in the main directory of this archive
|
||||
# for more details.
|
||||
#
|
||||
# Copyright (C) 1998, 2003 by David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
#
|
||||
|
||||
targets-$(CONFIG_IA64_HP_SIM) += bootloader
|
||||
targets := vmlinux.bin vmlinux.gz $(targets-y)
|
||||
|
||||
quiet_cmd_cptotop = LN $@
|
||||
cmd_cptotop = ln -f $< $@
|
||||
|
||||
vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y))
|
||||
$(call cmd,cptotop)
|
||||
@echo ' Kernel: $@ is ready'
|
||||
|
||||
boot: bootloader
|
||||
|
||||
bootloader: $(obj)/bootloader
|
||||
$(call cmd,cptotop)
|
||||
|
||||
$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
|
||||
$(call if_changed,gzip)
|
||||
|
||||
$(obj)/vmlinux.bin: vmlinux FORCE
|
||||
$(call if_changed,objcopy)
|
||||
|
||||
|
||||
LDFLAGS_bootloader = -static -T
|
||||
|
||||
$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \
|
||||
lib/lib.a arch/ia64/lib/lib.a FORCE
|
||||
$(call if_changed,ld)
|
||||
|
|
@ -1,165 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 1998-2003 Hewlett-Packard Co
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
*/
|
||||
|
||||
#include <asm/asmmacro.h>
|
||||
#include <asm/pal.h>
|
||||
|
||||
.bss
|
||||
.align 16
|
||||
stack_mem:
|
||||
.skip 16834
|
||||
|
||||
.text
|
||||
|
||||
/* This needs to be defined because lib/string.c:strlcat() calls it in case of error... */
|
||||
GLOBAL_ENTRY(printk)
|
||||
break 0
|
||||
END(printk)
|
||||
|
||||
GLOBAL_ENTRY(_start)
|
||||
.prologue
|
||||
.save rp, r0
|
||||
.body
|
||||
movl gp = __gp
|
||||
movl sp = stack_mem+16384-16
|
||||
bsw.1
|
||||
br.call.sptk.many rp=start_bootloader
|
||||
0: nop 0 /* dummy nop to make unwinding work */
|
||||
END(_start)
|
||||
|
||||
/*
|
||||
* Set a break point on this function so that symbols are available to set breakpoints in
|
||||
* the kernel being debugged.
|
||||
*/
|
||||
GLOBAL_ENTRY(debug_break)
|
||||
br.ret.sptk.many b0
|
||||
END(debug_break)
|
||||
|
||||
GLOBAL_ENTRY(ssc)
|
||||
.regstk 5,0,0,0
|
||||
mov r15=in4
|
||||
break 0x80001
|
||||
br.ret.sptk.many b0
|
||||
END(ssc)
|
||||
|
||||
GLOBAL_ENTRY(jmp_to_kernel)
|
||||
.regstk 2,0,0,0
|
||||
mov r28=in0
|
||||
mov b7=in1
|
||||
br.sptk.few b7
|
||||
END(jmp_to_kernel)
|
||||
|
||||
/*
|
||||
* r28 contains the index of the PAL function
|
||||
* r29--31 the args
|
||||
* Return values in ret0--3 (r8--11)
|
||||
*/
|
||||
GLOBAL_ENTRY(pal_emulator_static)
|
||||
mov r8=-1
|
||||
mov r9=256
|
||||
;;
|
||||
cmp.gtu p6,p7=r9,r28 /* r28 <= 255? */
|
||||
(p6) br.cond.sptk.few static
|
||||
;;
|
||||
mov r9=512
|
||||
;;
|
||||
cmp.gtu p6,p7=r9,r28
|
||||
(p6) br.cond.sptk.few stacked
|
||||
;;
|
||||
static: cmp.eq p6,p7=PAL_PTCE_INFO,r28
|
||||
(p7) br.cond.sptk.few 1f
|
||||
;;
|
||||
mov r8=0 /* status = 0 */
|
||||
movl r9=0x100000000 /* tc.base */
|
||||
movl r10=0x0000000200000003 /* count[0], count[1] */
|
||||
movl r11=0x1000000000002000 /* stride[0], stride[1] */
|
||||
br.cond.sptk.few rp
|
||||
1: cmp.eq p6,p7=PAL_FREQ_RATIOS,r28
|
||||
(p7) br.cond.sptk.few 1f
|
||||
mov r8=0 /* status = 0 */
|
||||
movl r9 =0x100000064 /* proc_ratio (1/100) */
|
||||
movl r10=0x100000100 /* bus_ratio<<32 (1/256) */
|
||||
movl r11=0x100000064 /* itc_ratio<<32 (1/100) */
|
||||
;;
|
||||
1: cmp.eq p6,p7=PAL_RSE_INFO,r28
|
||||
(p7) br.cond.sptk.few 1f
|
||||
mov r8=0 /* status = 0 */
|
||||
mov r9=96 /* num phys stacked */
|
||||
mov r10=0 /* hints */
|
||||
mov r11=0
|
||||
br.cond.sptk.few rp
|
||||
1: cmp.eq p6,p7=PAL_CACHE_FLUSH,r28 /* PAL_CACHE_FLUSH */
|
||||
(p7) br.cond.sptk.few 1f
|
||||
mov r9=ar.lc
|
||||
movl r8=524288 /* flush 512k million cache lines (16MB) */
|
||||
;;
|
||||
mov ar.lc=r8
|
||||
movl r8=0xe000000000000000
|
||||
;;
|
||||
.loop: fc r8
|
||||
add r8=32,r8
|
||||
br.cloop.sptk.few .loop
|
||||
sync.i
|
||||
;;
|
||||
srlz.i
|
||||
;;
|
||||
mov ar.lc=r9
|
||||
mov r8=r0
|
||||
;;
|
||||
1: cmp.eq p6,p7=PAL_PERF_MON_INFO,r28
|
||||
(p7) br.cond.sptk.few 1f
|
||||
mov r8=0 /* status = 0 */
|
||||
movl r9 =0x08122f04 /* generic=4 width=47 retired=8 cycles=18 */
|
||||
mov r10=0 /* reserved */
|
||||
mov r11=0 /* reserved */
|
||||
mov r16=0xffff /* implemented PMC */
|
||||
mov r17=0x3ffff /* implemented PMD */
|
||||
add r18=8,r29 /* second index */
|
||||
;;
|
||||
st8 [r29]=r16,16 /* store implemented PMC */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
;;
|
||||
st8 [r29]=r0,16 /* clear remaining bits */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
;;
|
||||
st8 [r29]=r17,16 /* store implemented PMD */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
mov r16=0xf0 /* cycles count capable PMC */
|
||||
;;
|
||||
st8 [r29]=r0,16 /* clear remaining bits */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
mov r17=0xf0 /* retired bundles capable PMC */
|
||||
;;
|
||||
st8 [r29]=r16,16 /* store cycles capable */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
;;
|
||||
st8 [r29]=r0,16 /* clear remaining bits */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
;;
|
||||
st8 [r29]=r17,16 /* store retired bundle capable */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
;;
|
||||
st8 [r29]=r0,16 /* clear remaining bits */
|
||||
st8 [r18]=r0,16 /* clear remaining bits */
|
||||
;;
|
||||
1: cmp.eq p6,p7=PAL_VM_SUMMARY,r28
|
||||
(p7) br.cond.sptk.few 1f
|
||||
mov r8=0 /* status = 0 */
|
||||
movl r9=0x2044040020F1865 /* num_tc_levels=2, num_unique_tcs=4 */
|
||||
/* max_itr_entry=64, max_dtr_entry=64 */
|
||||
/* hash_tag_id=2, max_pkr=15 */
|
||||
/* key_size=24, phys_add_size=50, vw=1 */
|
||||
movl r10=0x183C /* rid_size=24, impl_va_msb=60 */
|
||||
;;
|
||||
1: cmp.eq p6,p7=PAL_MEM_ATTRIB,r28
|
||||
(p7) br.cond.sptk.few 1f
|
||||
mov r8=0 /* status = 0 */
|
||||
mov r9=0x80|0x01 /* NatPage|WB */
|
||||
;;
|
||||
1: br.cond.sptk.few rp
|
||||
stacked:
|
||||
br.ret.sptk.few rp
|
||||
END(pal_emulator_static)
|
||||
|
|
@ -1,175 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* arch/ia64/hp/sim/boot/bootloader.c
|
||||
*
|
||||
* Loads an ELF kernel.
|
||||
*
|
||||
* Copyright (C) 1998-2003 Hewlett-Packard Co
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
* Stephane Eranian <eranian@hpl.hp.com>
|
||||
*
|
||||
* 01/07/99 S.Eranian modified to pass command line arguments to kernel
|
||||
*/
|
||||
struct task_struct; /* forward declaration for elf.h */
|
||||
|
||||
#include <linux/elf.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
|
||||
#include <asm/elf.h>
|
||||
#include <asm/intrinsics.h>
|
||||
#include <asm/pal.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/sal.h>
|
||||
|
||||
#include "ssc.h"
|
||||
|
||||
struct disk_req {
|
||||
unsigned long addr;
|
||||
unsigned len;
|
||||
};
|
||||
|
||||
struct disk_stat {
|
||||
int fd;
|
||||
unsigned count;
|
||||
};
|
||||
|
||||
extern void jmp_to_kernel (unsigned long bp, unsigned long e_entry);
|
||||
extern struct ia64_boot_param *sys_fw_init (const char *args, int arglen);
|
||||
extern void debug_break (void);
|
||||
|
||||
static void
|
||||
cons_write (const char *buf)
|
||||
{
|
||||
unsigned long ch;
|
||||
|
||||
while ((ch = *buf++) != '\0') {
|
||||
ssc(ch, 0, 0, 0, SSC_PUTCHAR);
|
||||
if (ch == '\n')
|
||||
ssc('\r', 0, 0, 0, SSC_PUTCHAR);
|
||||
}
|
||||
}
|
||||
|
||||
#define MAX_ARGS 32
|
||||
|
||||
void
|
||||
start_bootloader (void)
|
||||
{
|
||||
static char mem[4096];
|
||||
static char buffer[1024];
|
||||
unsigned long off;
|
||||
int fd, i;
|
||||
struct disk_req req;
|
||||
struct disk_stat stat;
|
||||
struct elfhdr *elf;
|
||||
struct elf_phdr *elf_phdr; /* program header */
|
||||
unsigned long e_entry, e_phoff, e_phnum;
|
||||
register struct ia64_boot_param *bp;
|
||||
char *kpath, *args;
|
||||
long arglen = 0;
|
||||
|
||||
ssc(0, 0, 0, 0, SSC_CONSOLE_INIT);
|
||||
|
||||
/*
|
||||
* S.Eranian: extract the commandline argument from the simulator
|
||||
*
|
||||
* The expected format is as follows:
|
||||
*
|
||||
* kernelname args...
|
||||
*
|
||||
* Both are optional but you can't have the second one without the first.
|
||||
*/
|
||||
arglen = ssc((long) buffer, 0, 0, 0, SSC_GET_ARGS);
|
||||
|
||||
kpath = "vmlinux";
|
||||
args = buffer;
|
||||
if (arglen > 0) {
|
||||
kpath = buffer;
|
||||
while (*args != ' ' && *args != '\0')
|
||||
++args, --arglen;
|
||||
if (*args == ' ')
|
||||
*args++ = '\0', --arglen;
|
||||
}
|
||||
|
||||
if (arglen <= 0) {
|
||||
args = "";
|
||||
arglen = 1;
|
||||
}
|
||||
|
||||
fd = ssc((long) kpath, 1, 0, 0, SSC_OPEN);
|
||||
|
||||
if (fd < 0) {
|
||||
cons_write(kpath);
|
||||
cons_write(": file not found, reboot now\n");
|
||||
for(;;);
|
||||
}
|
||||
stat.fd = fd;
|
||||
off = 0;
|
||||
|
||||
req.len = sizeof(mem);
|
||||
req.addr = (long) mem;
|
||||
ssc(fd, 1, (long) &req, off, SSC_READ);
|
||||
ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
|
||||
|
||||
elf = (struct elfhdr *) mem;
|
||||
if (elf->e_ident[0] == 0x7f && strncmp(elf->e_ident + 1, "ELF", 3) != 0) {
|
||||
cons_write("not an ELF file\n");
|
||||
return;
|
||||
}
|
||||
if (elf->e_type != ET_EXEC) {
|
||||
cons_write("not an ELF executable\n");
|
||||
return;
|
||||
}
|
||||
if (!elf_check_arch(elf)) {
|
||||
cons_write("kernel not for this processor\n");
|
||||
return;
|
||||
}
|
||||
|
||||
e_entry = elf->e_entry;
|
||||
e_phnum = elf->e_phnum;
|
||||
e_phoff = elf->e_phoff;
|
||||
|
||||
cons_write("loading ");
|
||||
cons_write(kpath);
|
||||
cons_write("...\n");
|
||||
|
||||
for (i = 0; i < e_phnum; ++i) {
|
||||
req.len = sizeof(*elf_phdr);
|
||||
req.addr = (long) mem;
|
||||
ssc(fd, 1, (long) &req, e_phoff, SSC_READ);
|
||||
ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
|
||||
if (stat.count != sizeof(*elf_phdr)) {
|
||||
cons_write("failed to read phdr\n");
|
||||
return;
|
||||
}
|
||||
e_phoff += sizeof(*elf_phdr);
|
||||
|
||||
elf_phdr = (struct elf_phdr *) mem;
|
||||
|
||||
if (elf_phdr->p_type != PT_LOAD)
|
||||
continue;
|
||||
|
||||
req.len = elf_phdr->p_filesz;
|
||||
req.addr = __pa(elf_phdr->p_paddr);
|
||||
ssc(fd, 1, (long) &req, elf_phdr->p_offset, SSC_READ);
|
||||
ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
|
||||
memset((char *)__pa(elf_phdr->p_paddr) + elf_phdr->p_filesz, 0,
|
||||
elf_phdr->p_memsz - elf_phdr->p_filesz);
|
||||
}
|
||||
ssc(fd, 0, 0, 0, SSC_CLOSE);
|
||||
|
||||
cons_write("starting kernel...\n");
|
||||
|
||||
/* fake an I/O base address: */
|
||||
ia64_setreg(_IA64_REG_AR_KR0, 0xffffc000000UL);
|
||||
|
||||
bp = sys_fw_init(args, arglen);
|
||||
|
||||
ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS);
|
||||
|
||||
debug_break();
|
||||
jmp_to_kernel((unsigned long) bp, e_entry);
|
||||
|
||||
cons_write("kernel returned!\n");
|
||||
ssc(-1, 0, 0, 0, SSC_EXIT);
|
||||
}
|
||||
|
|
@ -1,67 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
OUTPUT_FORMAT("elf64-ia64-little")
|
||||
OUTPUT_ARCH(ia64)
|
||||
ENTRY(_start)
|
||||
SECTIONS
|
||||
{
|
||||
/* Read-only sections, merged into text segment: */
|
||||
. = 0x100000;
|
||||
|
||||
_text = .;
|
||||
.text : { *(__ivt_section) *(.text) }
|
||||
_etext = .;
|
||||
|
||||
/* Global data */
|
||||
_data = .;
|
||||
.rodata : { *(.rodata) *(.rodata.*) }
|
||||
.data : { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS }
|
||||
__gp = ALIGN (8) + 0x200000;
|
||||
.got : { *(.got.plt) *(.got) }
|
||||
/* We want the small data sections together, so single-instruction offsets
|
||||
can access them all, and initialized data all before uninitialized, so
|
||||
we can shorten the on-disk segment size. */
|
||||
.sdata : { *(.sdata) }
|
||||
_edata = .;
|
||||
|
||||
__bss_start = .;
|
||||
.sbss : { *(.sbss) *(.scommon) }
|
||||
.bss : { *(.bss) *(COMMON) }
|
||||
. = ALIGN(64 / 8);
|
||||
__bss_stop = .;
|
||||
_end = . ;
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
/* DWARF debug sections.
|
||||
Symbols in the DWARF debugging sections are relative to the beginning
|
||||
of the section so we begin them at 0. */
|
||||
/* DWARF 1 */
|
||||
.debug 0 : { *(.debug) }
|
||||
.line 0 : { *(.line) }
|
||||
/* GNU DWARF 1 extensions */
|
||||
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
||||
.debug_sfnames 0 : { *(.debug_sfnames) }
|
||||
/* DWARF 1.1 and DWARF 2 */
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
/* DWARF 2 */
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_frame 0 : { *(.debug_frame) }
|
||||
.debug_str 0 : { *(.debug_str) }
|
||||
.debug_loc 0 : { *(.debug_loc) }
|
||||
.debug_macinfo 0 : { *(.debug_macinfo) }
|
||||
/* SGI/MIPS DWARF 2 extensions */
|
||||
.debug_weaknames 0 : { *(.debug_weaknames) }
|
||||
.debug_funcnames 0 : { *(.debug_funcnames) }
|
||||
.debug_typenames 0 : { *(.debug_typenames) }
|
||||
.debug_varnames 0 : { *(.debug_varnames) }
|
||||
/* These must appear regardless of . */
|
||||
}
|
||||
|
|
@ -1,374 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* PAL & SAL emulation.
|
||||
*
|
||||
* Copyright (C) 1998-2001 Hewlett-Packard Co
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
# include <linux/pci.h>
|
||||
#endif
|
||||
|
||||
#include <linux/efi.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/pal.h>
|
||||
#include <asm/sal.h>
|
||||
#include <asm/setup.h>
|
||||
|
||||
#include "ssc.h"
|
||||
|
||||
#define MB (1024*1024UL)
|
||||
|
||||
#define SIMPLE_MEMMAP 1
|
||||
|
||||
#if SIMPLE_MEMMAP
|
||||
# define NUM_MEM_DESCS 4
|
||||
#else
|
||||
# define NUM_MEM_DESCS 16
|
||||
#endif
|
||||
|
||||
static char fw_mem[( sizeof(struct ia64_boot_param)
|
||||
+ sizeof(efi_system_table_t)
|
||||
+ sizeof(efi_runtime_services_t)
|
||||
+ 1*sizeof(efi_config_table_t)
|
||||
+ sizeof(struct ia64_sal_systab)
|
||||
+ sizeof(struct ia64_sal_desc_entry_point)
|
||||
+ NUM_MEM_DESCS*(sizeof(efi_memory_desc_t))
|
||||
+ 1024)] __attribute__ ((aligned (8)));
|
||||
|
||||
#define SECS_PER_HOUR (60 * 60)
|
||||
#define SECS_PER_DAY (SECS_PER_HOUR * 24)
|
||||
|
||||
/* Compute the `struct tm' representation of *T,
|
||||
offset OFFSET seconds east of UTC,
|
||||
and store year, yday, mon, mday, wday, hour, min, sec into *TP.
|
||||
Return nonzero if successful. */
|
||||
int
|
||||
offtime (unsigned long t, efi_time_t *tp)
|
||||
{
|
||||
const unsigned short int __mon_yday[2][13] =
|
||||
{
|
||||
/* Normal years. */
|
||||
{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
|
||||
/* Leap years. */
|
||||
{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
|
||||
};
|
||||
long int days, rem, y;
|
||||
const unsigned short int *ip;
|
||||
|
||||
days = t / SECS_PER_DAY;
|
||||
rem = t % SECS_PER_DAY;
|
||||
while (rem < 0) {
|
||||
rem += SECS_PER_DAY;
|
||||
--days;
|
||||
}
|
||||
while (rem >= SECS_PER_DAY) {
|
||||
rem -= SECS_PER_DAY;
|
||||
++days;
|
||||
}
|
||||
tp->hour = rem / SECS_PER_HOUR;
|
||||
rem %= SECS_PER_HOUR;
|
||||
tp->minute = rem / 60;
|
||||
tp->second = rem % 60;
|
||||
/* January 1, 1970 was a Thursday. */
|
||||
y = 1970;
|
||||
|
||||
# define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
|
||||
# define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
|
||||
# define __isleap(year) \
|
||||
((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
|
||||
|
||||
while (days < 0 || days >= (__isleap (y) ? 366 : 365)) {
|
||||
/* Guess a corrected year, assuming 365 days per year. */
|
||||
long int yg = y + days / 365 - (days % 365 < 0);
|
||||
|
||||
/* Adjust DAYS and Y to match the guessed year. */
|
||||
days -= ((yg - y) * 365 + LEAPS_THRU_END_OF (yg - 1)
|
||||
- LEAPS_THRU_END_OF (y - 1));
|
||||
y = yg;
|
||||
}
|
||||
tp->year = y;
|
||||
ip = __mon_yday[__isleap(y)];
|
||||
for (y = 11; days < (long int) ip[y]; --y)
|
||||
continue;
|
||||
days -= ip[y];
|
||||
tp->month = y + 1;
|
||||
tp->day = days + 1;
|
||||
return 1;
|
||||
}
|
||||
|
||||
extern void pal_emulator_static (void);
|
||||
|
||||
/* Macro to emulate SAL call using legacy IN and OUT calls to CF8, CFC etc.. */
|
||||
|
||||
#define BUILD_CMD(addr) ((0x80000000 | (addr)) & ~3)
|
||||
|
||||
#define REG_OFFSET(addr) (0x00000000000000FF & (addr))
|
||||
#define DEVICE_FUNCTION(addr) (0x000000000000FF00 & (addr))
|
||||
#define BUS_NUMBER(addr) (0x0000000000FF0000 & (addr))
|
||||
|
||||
static efi_status_t
|
||||
fw_efi_get_time (efi_time_t *tm, efi_time_cap_t *tc)
|
||||
{
|
||||
#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
|
||||
struct {
|
||||
int tv_sec; /* must be 32bits to work */
|
||||
int tv_usec;
|
||||
} tv32bits;
|
||||
|
||||
ssc((unsigned long) &tv32bits, 0, 0, 0, SSC_GET_TOD);
|
||||
|
||||
memset(tm, 0, sizeof(*tm));
|
||||
offtime(tv32bits.tv_sec, tm);
|
||||
|
||||
if (tc)
|
||||
memset(tc, 0, sizeof(*tc));
|
||||
#else
|
||||
# error Not implemented yet...
|
||||
#endif
|
||||
return EFI_SUCCESS;
|
||||
}
|
||||
|
||||
static void
|
||||
efi_reset_system (int reset_type, efi_status_t status, unsigned long data_size, efi_char16_t *data)
|
||||
{
|
||||
#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
|
||||
ssc(status, 0, 0, 0, SSC_EXIT);
|
||||
#else
|
||||
# error Not implemented yet...
|
||||
#endif
|
||||
}
|
||||
|
||||
static efi_status_t
|
||||
efi_unimplemented (void)
|
||||
{
|
||||
return EFI_UNSUPPORTED;
|
||||
}
|
||||
|
||||
static struct sal_ret_values
|
||||
sal_emulator (long index, unsigned long in1, unsigned long in2,
|
||||
unsigned long in3, unsigned long in4, unsigned long in5,
|
||||
unsigned long in6, unsigned long in7)
|
||||
{
|
||||
long r9 = 0;
|
||||
long r10 = 0;
|
||||
long r11 = 0;
|
||||
long status;
|
||||
|
||||
/*
|
||||
* Don't do a "switch" here since that gives us code that
|
||||
* isn't self-relocatable.
|
||||
*/
|
||||
status = 0;
|
||||
if (index == SAL_FREQ_BASE) {
|
||||
if (in1 == SAL_FREQ_BASE_PLATFORM)
|
||||
r9 = 200000000;
|
||||
else if (in1 == SAL_FREQ_BASE_INTERVAL_TIMER) {
|
||||
/*
|
||||
* Is this supposed to be the cr.itc frequency
|
||||
* or something platform specific? The SAL
|
||||
* doc ain't exactly clear on this...
|
||||
*/
|
||||
r9 = 700000000;
|
||||
} else if (in1 == SAL_FREQ_BASE_REALTIME_CLOCK)
|
||||
r9 = 1;
|
||||
else
|
||||
status = -1;
|
||||
} else if (index == SAL_SET_VECTORS) {
|
||||
;
|
||||
} else if (index == SAL_GET_STATE_INFO) {
|
||||
;
|
||||
} else if (index == SAL_GET_STATE_INFO_SIZE) {
|
||||
;
|
||||
} else if (index == SAL_CLEAR_STATE_INFO) {
|
||||
;
|
||||
} else if (index == SAL_MC_RENDEZ) {
|
||||
;
|
||||
} else if (index == SAL_MC_SET_PARAMS) {
|
||||
;
|
||||
} else if (index == SAL_CACHE_FLUSH) {
|
||||
;
|
||||
} else if (index == SAL_CACHE_INIT) {
|
||||
;
|
||||
#ifdef CONFIG_PCI
|
||||
} else if (index == SAL_PCI_CONFIG_READ) {
|
||||
/*
|
||||
* in1 contains the PCI configuration address and in2
|
||||
* the size of the read. The value that is read is
|
||||
* returned via the general register r9.
|
||||
*/
|
||||
outl(BUILD_CMD(in1), 0xCF8);
|
||||
if (in2 == 1) /* Reading byte */
|
||||
r9 = inb(0xCFC + ((REG_OFFSET(in1) & 3)));
|
||||
else if (in2 == 2) /* Reading word */
|
||||
r9 = inw(0xCFC + ((REG_OFFSET(in1) & 2)));
|
||||
else /* Reading dword */
|
||||
r9 = inl(0xCFC);
|
||||
status = PCIBIOS_SUCCESSFUL;
|
||||
} else if (index == SAL_PCI_CONFIG_WRITE) {
|
||||
/*
|
||||
* in1 contains the PCI configuration address, in2 the
|
||||
* size of the write, and in3 the actual value to be
|
||||
* written out.
|
||||
*/
|
||||
outl(BUILD_CMD(in1), 0xCF8);
|
||||
if (in2 == 1) /* Writing byte */
|
||||
outb(in3, 0xCFC + ((REG_OFFSET(in1) & 3)));
|
||||
else if (in2 == 2) /* Writing word */
|
||||
outw(in3, 0xCFC + ((REG_OFFSET(in1) & 2)));
|
||||
else /* Writing dword */
|
||||
outl(in3, 0xCFC);
|
||||
status = PCIBIOS_SUCCESSFUL;
|
||||
#endif /* CONFIG_PCI */
|
||||
} else if (index == SAL_UPDATE_PAL) {
|
||||
;
|
||||
} else {
|
||||
status = -1;
|
||||
}
|
||||
return ((struct sal_ret_values) {status, r9, r10, r11});
|
||||
}
|
||||
|
||||
struct ia64_boot_param *
|
||||
sys_fw_init (const char *args, int arglen)
|
||||
{
|
||||
efi_system_table_t *efi_systab;
|
||||
efi_runtime_services_t *efi_runtime;
|
||||
efi_config_table_t *efi_tables;
|
||||
struct ia64_sal_systab *sal_systab;
|
||||
efi_memory_desc_t *efi_memmap, *md;
|
||||
unsigned long *pal_desc, *sal_desc;
|
||||
struct ia64_sal_desc_entry_point *sal_ed;
|
||||
struct ia64_boot_param *bp;
|
||||
unsigned char checksum = 0;
|
||||
char *cp, *cmd_line;
|
||||
int i = 0;
|
||||
# define MAKE_MD(typ, attr, start, end) \
|
||||
do { \
|
||||
md = efi_memmap + i++; \
|
||||
md->type = typ; \
|
||||
md->pad = 0; \
|
||||
md->phys_addr = start; \
|
||||
md->virt_addr = 0; \
|
||||
md->num_pages = (end - start) >> 12; \
|
||||
md->attribute = attr; \
|
||||
} while (0)
|
||||
|
||||
memset(fw_mem, 0, sizeof(fw_mem));
|
||||
|
||||
pal_desc = (unsigned long *) &pal_emulator_static;
|
||||
sal_desc = (unsigned long *) &sal_emulator;
|
||||
|
||||
cp = fw_mem;
|
||||
efi_systab = (void *) cp; cp += sizeof(*efi_systab);
|
||||
efi_runtime = (void *) cp; cp += sizeof(*efi_runtime);
|
||||
efi_tables = (void *) cp; cp += sizeof(*efi_tables);
|
||||
sal_systab = (void *) cp; cp += sizeof(*sal_systab);
|
||||
sal_ed = (void *) cp; cp += sizeof(*sal_ed);
|
||||
efi_memmap = (void *) cp; cp += NUM_MEM_DESCS*sizeof(*efi_memmap);
|
||||
bp = (void *) cp; cp += sizeof(*bp);
|
||||
cmd_line = (void *) cp;
|
||||
|
||||
if (args) {
|
||||
if (arglen >= 1024)
|
||||
arglen = 1023;
|
||||
memcpy(cmd_line, args, arglen);
|
||||
} else {
|
||||
arglen = 0;
|
||||
}
|
||||
cmd_line[arglen] = '\0';
|
||||
|
||||
memset(efi_systab, 0, sizeof(*efi_systab));
|
||||
efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE;
|
||||
efi_systab->hdr.revision = ((1 << 16) | 00);
|
||||
efi_systab->hdr.headersize = sizeof(efi_systab->hdr);
|
||||
efi_systab->fw_vendor = __pa("H\0e\0w\0l\0e\0t\0t\0-\0P\0a\0c\0k\0a\0r\0d\0\0");
|
||||
efi_systab->fw_revision = 1;
|
||||
efi_systab->runtime = (void *) __pa(efi_runtime);
|
||||
efi_systab->nr_tables = 1;
|
||||
efi_systab->tables = __pa(efi_tables);
|
||||
|
||||
efi_runtime->hdr.signature = EFI_RUNTIME_SERVICES_SIGNATURE;
|
||||
efi_runtime->hdr.revision = EFI_RUNTIME_SERVICES_REVISION;
|
||||
efi_runtime->hdr.headersize = sizeof(efi_runtime->hdr);
|
||||
efi_runtime->get_time = (void *)__pa(&fw_efi_get_time);
|
||||
efi_runtime->set_time = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->get_wakeup_time = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->set_wakeup_time = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->set_virtual_address_map = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->get_variable = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->get_next_variable = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->set_variable = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->get_next_high_mono_count = (void *)__pa(&efi_unimplemented);
|
||||
efi_runtime->reset_system = (void *)__pa(&efi_reset_system);
|
||||
|
||||
efi_tables->guid = SAL_SYSTEM_TABLE_GUID;
|
||||
efi_tables->table = __pa(sal_systab);
|
||||
|
||||
/* fill in the SAL system table: */
|
||||
memcpy(sal_systab->signature, "SST_", 4);
|
||||
sal_systab->size = sizeof(*sal_systab);
|
||||
sal_systab->sal_rev_minor = 1;
|
||||
sal_systab->sal_rev_major = 0;
|
||||
sal_systab->entry_count = 1;
|
||||
|
||||
#ifdef CONFIG_IA64_GENERIC
|
||||
strcpy(sal_systab->oem_id, "Generic");
|
||||
strcpy(sal_systab->product_id, "IA-64 system");
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_IA64_HP_SIM
|
||||
strcpy(sal_systab->oem_id, "Hewlett-Packard");
|
||||
strcpy(sal_systab->product_id, "HP-simulator");
|
||||
#endif
|
||||
|
||||
/* fill in an entry point: */
|
||||
sal_ed->type = SAL_DESC_ENTRY_POINT;
|
||||
sal_ed->pal_proc = __pa(pal_desc[0]);
|
||||
sal_ed->sal_proc = __pa(sal_desc[0]);
|
||||
sal_ed->gp = __pa(sal_desc[1]);
|
||||
|
||||
for (cp = (char *) sal_systab; cp < (char *) efi_memmap; ++cp)
|
||||
checksum += *cp;
|
||||
|
||||
sal_systab->checksum = -checksum;
|
||||
|
||||
#if SIMPLE_MEMMAP
|
||||
/* simulate free memory at physical address zero */
|
||||
MAKE_MD(EFI_BOOT_SERVICES_DATA, EFI_MEMORY_WB, 0*MB, 1*MB);
|
||||
MAKE_MD(EFI_PAL_CODE, EFI_MEMORY_WB, 1*MB, 2*MB);
|
||||
MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 2*MB, 130*MB);
|
||||
MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 4096*MB, 4128*MB);
|
||||
#else
|
||||
MAKE_MD( 4, 0x9, 0x0000000000000000, 0x0000000000001000);
|
||||
MAKE_MD( 7, 0x9, 0x0000000000001000, 0x000000000008a000);
|
||||
MAKE_MD( 4, 0x9, 0x000000000008a000, 0x00000000000a0000);
|
||||
MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000);
|
||||
MAKE_MD( 7, 0x9, 0x0000000000100000, 0x0000000004400000);
|
||||
MAKE_MD( 2, 0x9, 0x0000000004400000, 0x0000000004be5000);
|
||||
MAKE_MD( 7, 0x9, 0x0000000004be5000, 0x000000007f77e000);
|
||||
MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000);
|
||||
MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000);
|
||||
MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000);
|
||||
MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000);
|
||||
MAKE_MD( 7, 0x9, 0x000000007fc3a000, 0x000000007fea0000);
|
||||
MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000);
|
||||
MAKE_MD( 7, 0x9, 0x000000007fea8000, 0x000000007feab000);
|
||||
MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000);
|
||||
MAKE_MD( 7, 0x9, 0x00000000ff400000, 0x0000000104000000);
|
||||
#endif
|
||||
|
||||
bp->efi_systab = __pa(&fw_mem);
|
||||
bp->efi_memmap = __pa(efi_memmap);
|
||||
bp->efi_memmap_size = NUM_MEM_DESCS*sizeof(efi_memory_desc_t);
|
||||
bp->efi_memdesc_size = sizeof(efi_memory_desc_t);
|
||||
bp->efi_memdesc_version = 1;
|
||||
bp->command_line = __pa(cmd_line);
|
||||
bp->console_info.num_cols = 80;
|
||||
bp->console_info.num_rows = 25;
|
||||
bp->console_info.orig_x = 0;
|
||||
bp->console_info.orig_y = 24;
|
||||
bp->fpswa = 0;
|
||||
|
||||
return bp;
|
||||
}
|
||||
|
|
@ -1,36 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 1998-2003 Hewlett-Packard Co
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
* Stephane Eranian <eranian@hpl.hp.com>
|
||||
*/
|
||||
#ifndef ssc_h
|
||||
#define ssc_h
|
||||
|
||||
/* Simulator system calls: */
|
||||
|
||||
#define SSC_CONSOLE_INIT 20
|
||||
#define SSC_GETCHAR 21
|
||||
#define SSC_PUTCHAR 31
|
||||
#define SSC_OPEN 50
|
||||
#define SSC_CLOSE 51
|
||||
#define SSC_READ 52
|
||||
#define SSC_WRITE 53
|
||||
#define SSC_GET_COMPLETION 54
|
||||
#define SSC_WAIT_COMPLETION 55
|
||||
#define SSC_CONNECT_INTERRUPT 58
|
||||
#define SSC_GENERATE_INTERRUPT 59
|
||||
#define SSC_SET_PERIODIC_INTERRUPT 60
|
||||
#define SSC_GET_RTC 65
|
||||
#define SSC_EXIT 66
|
||||
#define SSC_LOAD_SYMBOLS 69
|
||||
#define SSC_GET_TOD 74
|
||||
|
||||
#define SSC_GET_ARGS 75
|
||||
|
||||
/*
|
||||
* Simulator system call.
|
||||
*/
|
||||
extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr);
|
||||
|
||||
#endif /* ssc_h */
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#include <asm/asmmacro.h>
|
||||
|
||||
/*
|
||||
* Simulator system call.
|
||||
*/
|
||||
GLOBAL_ENTRY(ia64_ssc)
|
||||
mov r15=r36
|
||||
break 0x80001
|
||||
br.ret.sptk.many rp
|
||||
END(ia64_ssc)
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Platform dependent support for HP simulator.
|
||||
*
|
||||
* Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
* Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/param.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/kdev_t.h>
|
||||
#include <linux/console.h>
|
||||
|
||||
#include <asm/delay.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/pal.h>
|
||||
#include <asm/machvec.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/sal.h>
|
||||
#include <asm/hpsim.h>
|
||||
|
||||
#include "hpsim_ssc.h"
|
||||
|
||||
static int simcons_init (struct console *, char *);
|
||||
static void simcons_write (struct console *, const char *, unsigned);
|
||||
static struct tty_driver *simcons_console_device (struct console *, int *);
|
||||
|
||||
static struct console hpsim_cons = {
|
||||
.name = "simcons",
|
||||
.write = simcons_write,
|
||||
.device = simcons_console_device,
|
||||
.setup = simcons_init,
|
||||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
};
|
||||
|
||||
static int
|
||||
simcons_init (struct console *cons, char *options)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
simcons_write (struct console *cons, const char *buf, unsigned count)
|
||||
{
|
||||
unsigned long ch;
|
||||
|
||||
while (count-- > 0) {
|
||||
ch = *buf++;
|
||||
ia64_ssc(ch, 0, 0, 0, SSC_PUTCHAR);
|
||||
if (ch == '\n')
|
||||
ia64_ssc('\r', 0, 0, 0, SSC_PUTCHAR);
|
||||
}
|
||||
}
|
||||
|
||||
static struct tty_driver *simcons_console_device (struct console *c, int *index)
|
||||
{
|
||||
*index = c->index;
|
||||
return hp_simserial_driver;
|
||||
}
|
||||
|
||||
int simcons_register(void)
|
||||
{
|
||||
if (!ia64_platform_is("hpsim"))
|
||||
return 1;
|
||||
|
||||
if (hpsim_cons.flags & CON_ENABLED)
|
||||
return 1;
|
||||
|
||||
register_console(&hpsim_cons);
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1,76 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Platform dependent support for HP simulator.
|
||||
*
|
||||
* Copyright (C) 1998-2001 Hewlett-Packard Co
|
||||
* Copyright (C) 1998-2001 David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/irq.h>
|
||||
|
||||
#include "hpsim_ssc.h"
|
||||
|
||||
static unsigned int
|
||||
hpsim_irq_startup(struct irq_data *data)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
hpsim_irq_noop(struct irq_data *data)
|
||||
{
|
||||
}
|
||||
|
||||
static int
|
||||
hpsim_set_affinity_noop(struct irq_data *d, const struct cpumask *b, bool f)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_chip irq_type_hp_sim = {
|
||||
.name = "hpsim",
|
||||
.irq_startup = hpsim_irq_startup,
|
||||
.irq_shutdown = hpsim_irq_noop,
|
||||
.irq_enable = hpsim_irq_noop,
|
||||
.irq_disable = hpsim_irq_noop,
|
||||
.irq_ack = hpsim_irq_noop,
|
||||
.irq_set_affinity = hpsim_set_affinity_noop,
|
||||
};
|
||||
|
||||
static void hpsim_irq_set_chip(int irq)
|
||||
{
|
||||
struct irq_chip *chip = irq_get_chip(irq);
|
||||
|
||||
if (chip == &no_irq_chip)
|
||||
irq_set_chip(irq, &irq_type_hp_sim);
|
||||
}
|
||||
|
||||
static void hpsim_connect_irq(int intr, int irq)
|
||||
{
|
||||
ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT);
|
||||
}
|
||||
|
||||
int hpsim_get_irq(int intr)
|
||||
{
|
||||
int irq = assign_irq_vector(AUTO_ASSIGN);
|
||||
|
||||
if (irq >= 0) {
|
||||
hpsim_irq_set_chip(irq);
|
||||
irq_set_handler(irq, handle_simple_irq);
|
||||
hpsim_connect_irq(intr, irq);
|
||||
}
|
||||
|
||||
return irq;
|
||||
}
|
||||
|
||||
void __init
|
||||
hpsim_irq_init (void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for_each_active_irq(i)
|
||||
hpsim_irq_set_chip(i);
|
||||
}
|
||||
|
|
@ -1,3 +0,0 @@
|
|||
#define MACHVEC_PLATFORM_NAME hpsim
|
||||
#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpsim.h>
|
||||
#include <asm/machvec_init.h>
|
||||
|
|
@ -1,41 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Platform dependent support for HP simulator.
|
||||
*
|
||||
* Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
* Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
|
||||
*/
|
||||
#include <linux/console.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kdev_t.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/major.h>
|
||||
#include <linux/param.h>
|
||||
#include <linux/root_dev.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include <asm/delay.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/pal.h>
|
||||
#include <asm/machvec.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/sal.h>
|
||||
#include <asm/hpsim.h>
|
||||
|
||||
#include "hpsim_ssc.h"
|
||||
|
||||
void
|
||||
ia64_ctl_trace (long on)
|
||||
{
|
||||
ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE);
|
||||
}
|
||||
|
||||
void __init
|
||||
hpsim_setup (char **cmdline_p)
|
||||
{
|
||||
ROOT_DEV = Root_SDA1; /* default to first SCSI drive */
|
||||
|
||||
simcons_register();
|
||||
}
|
||||
|
|
@ -1,37 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Platform dependent support for HP simulator.
|
||||
*
|
||||
* Copyright (C) 1998, 1999 Hewlett-Packard Co
|
||||
* Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
* Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
|
||||
*/
|
||||
#ifndef _IA64_PLATFORM_HPSIM_SSC_H
|
||||
#define _IA64_PLATFORM_HPSIM_SSC_H
|
||||
|
||||
/* Simulator system calls: */
|
||||
|
||||
#define SSC_CONSOLE_INIT 20
|
||||
#define SSC_GETCHAR 21
|
||||
#define SSC_PUTCHAR 31
|
||||
#define SSC_CONNECT_INTERRUPT 58
|
||||
#define SSC_GENERATE_INTERRUPT 59
|
||||
#define SSC_SET_PERIODIC_INTERRUPT 60
|
||||
#define SSC_GET_RTC 65
|
||||
#define SSC_EXIT 66
|
||||
#define SSC_LOAD_SYMBOLS 69
|
||||
#define SSC_GET_TOD 74
|
||||
#define SSC_CTL_TRACE 76
|
||||
|
||||
#define SSC_NETDEV_PROBE 100
|
||||
#define SSC_NETDEV_SEND 101
|
||||
#define SSC_NETDEV_RECV 102
|
||||
#define SSC_NETDEV_ATTACH 103
|
||||
#define SSC_NETDEV_DETACH 104
|
||||
|
||||
/*
|
||||
* Simulator system call.
|
||||
*/
|
||||
extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
|
||||
|
||||
#endif /* _IA64_PLATFORM_HPSIM_SSC_H */
|
||||
|
|
@ -1,510 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Simulated Ethernet Driver
|
||||
*
|
||||
* Copyright (C) 1999-2001, 2003 Hewlett-Packard Co
|
||||
* Stephane Eranian <eranian@hpl.hp.com>
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/in.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/inetdevice.h>
|
||||
#include <linux/if_ether.h>
|
||||
#include <linux/if_arp.h>
|
||||
#include <linux/skbuff.h>
|
||||
#include <linux/notifier.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/hpsim.h>
|
||||
|
||||
#include "hpsim_ssc.h"
|
||||
|
||||
#define SIMETH_RECV_MAX 10
|
||||
|
||||
/*
|
||||
* Maximum possible received frame for Ethernet.
|
||||
* We preallocate an sk_buff of that size to avoid costly
|
||||
* memcpy for temporary buffer into sk_buff. We do basically
|
||||
* what's done in other drivers, like eepro with a ring.
|
||||
* The difference is, of course, that we don't have real DMA !!!
|
||||
*/
|
||||
#define SIMETH_FRAME_SIZE ETH_FRAME_LEN
|
||||
|
||||
|
||||
#define NETWORK_INTR 8
|
||||
|
||||
struct simeth_local {
|
||||
struct net_device_stats stats;
|
||||
int simfd; /* descriptor in the simulator */
|
||||
};
|
||||
|
||||
static int simeth_probe1(void);
|
||||
static int simeth_open(struct net_device *dev);
|
||||
static int simeth_close(struct net_device *dev);
|
||||
static int simeth_tx(struct sk_buff *skb, struct net_device *dev);
|
||||
static int simeth_rx(struct net_device *dev);
|
||||
static struct net_device_stats *simeth_get_stats(struct net_device *dev);
|
||||
static irqreturn_t simeth_interrupt(int irq, void *dev_id);
|
||||
static void set_multicast_list(struct net_device *dev);
|
||||
static int simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr);
|
||||
|
||||
static char *simeth_version="0.3";
|
||||
|
||||
/*
|
||||
* This variable is used to establish a mapping between the Linux/ia64 kernel
|
||||
* and the host linux kernel.
|
||||
*
|
||||
* As of today, we support only one card, even though most of the code
|
||||
* is ready for many more. The mapping is then:
|
||||
* linux/ia64 -> linux/x86
|
||||
* eth0 -> eth1
|
||||
*
|
||||
* In the future, we some string operations, we could easily support up
|
||||
* to 10 cards (0-9).
|
||||
*
|
||||
* The default mapping can be changed on the kernel command line by
|
||||
* specifying simeth=ethX (or whatever string you want).
|
||||
*/
|
||||
static char *simeth_device="eth0"; /* default host interface to use */
|
||||
|
||||
|
||||
|
||||
static volatile unsigned int card_count; /* how many cards "found" so far */
|
||||
static int simeth_debug; /* set to 1 to get debug information */
|
||||
|
||||
/*
|
||||
* Used to catch IFF_UP & IFF_DOWN events
|
||||
*/
|
||||
static struct notifier_block simeth_dev_notifier = {
|
||||
simeth_device_event,
|
||||
NULL
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* Function used when using a kernel command line option.
|
||||
*
|
||||
* Format: simeth=interface_name (like eth0)
|
||||
*/
|
||||
static int __init
|
||||
simeth_setup(char *str)
|
||||
{
|
||||
simeth_device = str;
|
||||
return 1;
|
||||
}
|
||||
|
||||
__setup("simeth=", simeth_setup);
|
||||
|
||||
/*
|
||||
* Function used to probe for simeth devices when not installed
|
||||
* as a loadable module
|
||||
*/
|
||||
|
||||
int __init
|
||||
simeth_probe (void)
|
||||
{
|
||||
int r;
|
||||
|
||||
printk(KERN_INFO "simeth: v%s\n", simeth_version);
|
||||
|
||||
r = simeth_probe1();
|
||||
|
||||
if (r == 0) register_netdevice_notifier(&simeth_dev_notifier);
|
||||
|
||||
return r;
|
||||
}
|
||||
|
||||
static inline int
|
||||
netdev_probe(char *name, unsigned char *ether)
|
||||
{
|
||||
return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE);
|
||||
}
|
||||
|
||||
|
||||
static inline int
|
||||
netdev_attach(int fd, int irq, unsigned int ipaddr)
|
||||
{
|
||||
/* this puts the host interface in the right mode (start interrupting) */
|
||||
return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH);
|
||||
}
|
||||
|
||||
|
||||
static inline int
|
||||
netdev_detach(int fd)
|
||||
{
|
||||
/*
|
||||
* inactivate the host interface (don't interrupt anymore) */
|
||||
return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH);
|
||||
}
|
||||
|
||||
static inline int
|
||||
netdev_send(int fd, unsigned char *buf, unsigned int len)
|
||||
{
|
||||
return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND);
|
||||
}
|
||||
|
||||
static inline int
|
||||
netdev_read(int fd, unsigned char *buf, unsigned int len)
|
||||
{
|
||||
return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV);
|
||||
}
|
||||
|
||||
static const struct net_device_ops simeth_netdev_ops = {
|
||||
.ndo_open = simeth_open,
|
||||
.ndo_stop = simeth_close,
|
||||
.ndo_start_xmit = simeth_tx,
|
||||
.ndo_get_stats = simeth_get_stats,
|
||||
.ndo_set_rx_mode = set_multicast_list, /* not yet used */
|
||||
|
||||
};
|
||||
|
||||
/*
|
||||
* Function shared with module code, so cannot be in init section
|
||||
*
|
||||
* So far this function "detects" only one card (test_&_set) but could
|
||||
* be extended easily.
|
||||
*
|
||||
* Return:
|
||||
* - -ENODEV is no device found
|
||||
* - -ENOMEM is no more memory
|
||||
* - 0 otherwise
|
||||
*/
|
||||
static int
|
||||
simeth_probe1(void)
|
||||
{
|
||||
unsigned char mac_addr[ETH_ALEN];
|
||||
struct simeth_local *local;
|
||||
struct net_device *dev;
|
||||
int fd, err, rc;
|
||||
|
||||
/*
|
||||
* XXX Fix me
|
||||
* let's support just one card for now
|
||||
*/
|
||||
if (test_and_set_bit(0, &card_count))
|
||||
return -ENODEV;
|
||||
|
||||
/*
|
||||
* check with the simulator for the device
|
||||
*/
|
||||
fd = netdev_probe(simeth_device, mac_addr);
|
||||
if (fd == -1)
|
||||
return -ENODEV;
|
||||
|
||||
dev = alloc_etherdev(sizeof(struct simeth_local));
|
||||
if (!dev)
|
||||
return -ENOMEM;
|
||||
|
||||
memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr));
|
||||
|
||||
local = netdev_priv(dev);
|
||||
local->simfd = fd; /* keep track of underlying file descriptor */
|
||||
|
||||
dev->netdev_ops = &simeth_netdev_ops;
|
||||
|
||||
err = register_netdev(dev);
|
||||
if (err) {
|
||||
free_netdev(dev);
|
||||
return err;
|
||||
}
|
||||
|
||||
/*
|
||||
* attach the interrupt in the simulator, this does enable interrupts
|
||||
* until a netdev_attach() is called
|
||||
*/
|
||||
if ((rc = hpsim_get_irq(NETWORK_INTR)) < 0)
|
||||
panic("%s: out of interrupt vectors!\n", __func__);
|
||||
dev->irq = rc;
|
||||
|
||||
printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr=%pm, IRQ %d\n",
|
||||
dev->name, simeth_device, local->simfd, dev->dev_addr, dev->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* actually binds the device to an interrupt vector
|
||||
*/
|
||||
static int
|
||||
simeth_open(struct net_device *dev)
|
||||
{
|
||||
if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) {
|
||||
printk(KERN_WARNING "simeth: unable to get IRQ %d.\n", dev->irq);
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
netif_start_queue(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* copied from lapbether.c */
|
||||
static __inline__ int dev_is_ethdev(struct net_device *dev)
|
||||
{
|
||||
return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5));
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Handler for IFF_UP or IFF_DOWN
|
||||
*
|
||||
* The reason for that is that we don't want to be interrupted when the
|
||||
* interface is down. There is no way to unconnect in the simualtor. Instead
|
||||
* we use this function to shutdown packet processing in the frame filter
|
||||
* in the simulator. Thus no interrupts are generated
|
||||
*
|
||||
*
|
||||
* That's also the place where we pass the IP address of this device to the
|
||||
* simulator so that that we can start filtering packets for it
|
||||
*
|
||||
* There may be a better way of doing this, but I don't know which yet.
|
||||
*/
|
||||
static int
|
||||
simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
|
||||
{
|
||||
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
|
||||
struct simeth_local *local;
|
||||
struct in_device *in_dev;
|
||||
struct in_ifaddr **ifap = NULL;
|
||||
struct in_ifaddr *ifa = NULL;
|
||||
int r;
|
||||
|
||||
|
||||
if ( ! dev ) {
|
||||
printk(KERN_WARNING "simeth_device_event dev=0\n");
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
if (dev_net(dev) != &init_net)
|
||||
return NOTIFY_DONE;
|
||||
|
||||
if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
|
||||
|
||||
/*
|
||||
* Check whether or not it's for an ethernet device
|
||||
*
|
||||
* XXX Fixme: This works only as long as we support one
|
||||
* type of ethernet device.
|
||||
*/
|
||||
if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE;
|
||||
|
||||
if ((in_dev=dev->ip_ptr) != NULL) {
|
||||
for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; ifap=&ifa->ifa_next)
|
||||
if (strcmp(dev->name, ifa->ifa_label) == 0) break;
|
||||
}
|
||||
if ( ifa == NULL ) {
|
||||
printk(KERN_ERR "simeth_open: can't find device %s's ifa\n", dev->name);
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n",
|
||||
dev->name, ntohl(ifa->ifa_local));
|
||||
|
||||
/*
|
||||
* XXX Fix me
|
||||
* if the device was up, and we're simply reconfiguring it, not sure
|
||||
* we get DOWN then UP.
|
||||
*/
|
||||
|
||||
local = netdev_priv(dev);
|
||||
/* now do it for real */
|
||||
r = event == NETDEV_UP ?
|
||||
netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)):
|
||||
netdev_detach(local->simfd);
|
||||
|
||||
printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n",
|
||||
event == NETDEV_UP ? "attach":"detach", r);
|
||||
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
static int
|
||||
simeth_close(struct net_device *dev)
|
||||
{
|
||||
netif_stop_queue(dev);
|
||||
|
||||
free_irq(dev->irq, dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Only used for debug
|
||||
*/
|
||||
static void
|
||||
frame_print(unsigned char *from, unsigned char *frame, int len)
|
||||
{
|
||||
int i;
|
||||
|
||||
printk("%s: (%d) %02x", from, len, frame[0] & 0xff);
|
||||
for(i=1; i < 6; i++ ) {
|
||||
printk(":%02x", frame[i] &0xff);
|
||||
}
|
||||
printk(" %2x", frame[6] &0xff);
|
||||
for(i=7; i < 12; i++ ) {
|
||||
printk(":%02x", frame[i] &0xff);
|
||||
}
|
||||
printk(" [%02x%02x]\n", frame[12], frame[13]);
|
||||
|
||||
for(i=14; i < len; i++ ) {
|
||||
printk("%02x ", frame[i] &0xff);
|
||||
if ( (i%10)==0) printk("\n");
|
||||
}
|
||||
printk("\n");
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Function used to transmit of frame, very last one on the path before
|
||||
* going to the simulator.
|
||||
*/
|
||||
static int
|
||||
simeth_tx(struct sk_buff *skb, struct net_device *dev)
|
||||
{
|
||||
struct simeth_local *local = netdev_priv(dev);
|
||||
|
||||
#if 0
|
||||
/* ensure we have at least ETH_ZLEN bytes (min frame size) */
|
||||
unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
|
||||
/* Where do the extra padding bytes comes from inthe skbuff ? */
|
||||
#else
|
||||
/* the real driver in the host system is going to take care of that
|
||||
* or maybe it's the NIC itself.
|
||||
*/
|
||||
unsigned int length = skb->len;
|
||||
#endif
|
||||
|
||||
local->stats.tx_bytes += skb->len;
|
||||
local->stats.tx_packets++;
|
||||
|
||||
|
||||
if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length);
|
||||
|
||||
netdev_send(local->simfd, skb->data, length);
|
||||
|
||||
/*
|
||||
* we are synchronous on write, so we don't simulate a
|
||||
* trasnmit complete interrupt, thus we don't need to arm a tx
|
||||
*/
|
||||
|
||||
dev_kfree_skb(skb);
|
||||
return NETDEV_TX_OK;
|
||||
}
|
||||
|
||||
static inline struct sk_buff *
|
||||
make_new_skb(struct net_device *dev)
|
||||
{
|
||||
struct sk_buff *nskb;
|
||||
|
||||
/*
|
||||
* The +2 is used to make sure that the IP header is nicely
|
||||
* aligned (on 4byte boundary I assume 14+2=16)
|
||||
*/
|
||||
nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2);
|
||||
if ( nskb == NULL ) {
|
||||
printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
skb_reserve(nskb, 2); /* Align IP on 16 byte boundaries */
|
||||
|
||||
skb_put(nskb,SIMETH_FRAME_SIZE);
|
||||
|
||||
return nskb;
|
||||
}
|
||||
|
||||
/*
|
||||
* called from interrupt handler to process a received frame
|
||||
*/
|
||||
static int
|
||||
simeth_rx(struct net_device *dev)
|
||||
{
|
||||
struct simeth_local *local;
|
||||
struct sk_buff *skb;
|
||||
int len;
|
||||
int rcv_count = SIMETH_RECV_MAX;
|
||||
|
||||
local = netdev_priv(dev);
|
||||
/*
|
||||
* the loop concept has been borrowed from other drivers
|
||||
* looks to me like it's a throttling thing to avoid pushing to many
|
||||
* packets at one time into the stack. Making sure we can process them
|
||||
* upstream and make forward progress overall
|
||||
*/
|
||||
do {
|
||||
if ( (skb=make_new_skb(dev)) == NULL ) {
|
||||
printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
|
||||
local->stats.rx_dropped++;
|
||||
return 0;
|
||||
}
|
||||
/*
|
||||
* Read only one frame at a time
|
||||
*/
|
||||
len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE);
|
||||
if ( len == 0 ) {
|
||||
if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: count=%d netdev_read=0\n",
|
||||
dev->name, SIMETH_RECV_MAX-rcv_count);
|
||||
break;
|
||||
}
|
||||
#if 0
|
||||
/*
|
||||
* XXX Fix me
|
||||
* Should really do a csum+copy here
|
||||
*/
|
||||
skb_copy_to_linear_data(skb, frame, len);
|
||||
#endif
|
||||
skb->protocol = eth_type_trans(skb, dev);
|
||||
|
||||
if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, len);
|
||||
|
||||
/*
|
||||
* push the packet up & trigger software interrupt
|
||||
*/
|
||||
netif_rx(skb);
|
||||
|
||||
local->stats.rx_packets++;
|
||||
local->stats.rx_bytes += len;
|
||||
|
||||
} while ( --rcv_count );
|
||||
|
||||
return len; /* 0 = nothing left to read, otherwise, we can try again */
|
||||
}
|
||||
|
||||
/*
|
||||
* Interrupt handler (Yes, we can do it too !!!)
|
||||
*/
|
||||
static irqreturn_t
|
||||
simeth_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct net_device *dev = dev_id;
|
||||
|
||||
/*
|
||||
* very simple loop because we get interrupts only when receiving
|
||||
*/
|
||||
while (simeth_rx(dev));
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct net_device_stats *
|
||||
simeth_get_stats(struct net_device *dev)
|
||||
{
|
||||
struct simeth_local *local = netdev_priv(dev);
|
||||
|
||||
return &local->stats;
|
||||
}
|
||||
|
||||
/* fake multicast ability */
|
||||
static void
|
||||
set_multicast_list(struct net_device *dev)
|
||||
{
|
||||
printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name);
|
||||
}
|
||||
|
||||
__initcall(simeth_probe);
|
||||
|
|
@ -1,373 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Simulated SCSI driver.
|
||||
*
|
||||
* Copyright (C) 1999, 2001-2003 Hewlett-Packard Co
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
* Stephane Eranian <eranian@hpl.hp.com>
|
||||
*
|
||||
* 02/01/15 David Mosberger Updated for v2.5.1
|
||||
* 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33
|
||||
*/
|
||||
#include <linux/blkdev.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/timer.h>
|
||||
#include <asm/irq.h>
|
||||
#include "hpsim_ssc.h"
|
||||
|
||||
#include <scsi/scsi.h>
|
||||
#include <scsi/scsi_cmnd.h>
|
||||
#include <scsi/scsi_device.h>
|
||||
#include <scsi/scsi_host.h>
|
||||
|
||||
#define DEBUG_SIMSCSI 0
|
||||
|
||||
#define SIMSCSI_REQ_QUEUE_LEN 64
|
||||
#define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd"
|
||||
|
||||
/* Simulator system calls: */
|
||||
|
||||
#define SSC_OPEN 50
|
||||
#define SSC_CLOSE 51
|
||||
#define SSC_READ 52
|
||||
#define SSC_WRITE 53
|
||||
#define SSC_GET_COMPLETION 54
|
||||
#define SSC_WAIT_COMPLETION 55
|
||||
|
||||
#define SSC_WRITE_ACCESS 2
|
||||
#define SSC_READ_ACCESS 1
|
||||
|
||||
#if DEBUG_SIMSCSI
|
||||
int simscsi_debug;
|
||||
# define DBG simscsi_debug
|
||||
#else
|
||||
# define DBG 0
|
||||
#endif
|
||||
|
||||
static struct Scsi_Host *host;
|
||||
|
||||
static void simscsi_interrupt (unsigned long val);
|
||||
static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0);
|
||||
|
||||
struct disk_req {
|
||||
unsigned long addr;
|
||||
unsigned len;
|
||||
};
|
||||
|
||||
struct disk_stat {
|
||||
int fd;
|
||||
unsigned count;
|
||||
};
|
||||
|
||||
static int desc[16] = {
|
||||
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
|
||||
};
|
||||
|
||||
static struct queue_entry {
|
||||
struct scsi_cmnd *sc;
|
||||
} queue[SIMSCSI_REQ_QUEUE_LEN];
|
||||
|
||||
static int rd, wr;
|
||||
static atomic_t num_reqs = ATOMIC_INIT(0);
|
||||
|
||||
/* base name for default disks */
|
||||
static char *simscsi_root = DEFAULT_SIMSCSI_ROOT;
|
||||
|
||||
#define MAX_ROOT_LEN 128
|
||||
|
||||
/*
|
||||
* used to setup a new base for disk images
|
||||
* to use /foo/bar/disk[a-z] as disk images
|
||||
* you have to specify simscsi=/foo/bar/disk on the command line
|
||||
*/
|
||||
static int __init
|
||||
simscsi_setup (char *s)
|
||||
{
|
||||
/* XXX Fix me we may need to strcpy() ? */
|
||||
if (strlen(s) > MAX_ROOT_LEN) {
|
||||
printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n",
|
||||
simscsi_root);
|
||||
} else
|
||||
simscsi_root = s;
|
||||
return 1;
|
||||
}
|
||||
|
||||
__setup("simscsi=", simscsi_setup);
|
||||
|
||||
static void
|
||||
simscsi_interrupt (unsigned long val)
|
||||
{
|
||||
struct scsi_cmnd *sc;
|
||||
|
||||
while ((sc = queue[rd].sc) != NULL) {
|
||||
atomic_dec(&num_reqs);
|
||||
queue[rd].sc = NULL;
|
||||
if (DBG)
|
||||
printk("simscsi_interrupt: done with %u\n",
|
||||
sc->request->tag);
|
||||
(*sc->scsi_done)(sc);
|
||||
rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN;
|
||||
}
|
||||
}
|
||||
|
||||
static int
|
||||
simscsi_biosparam (struct scsi_device *sdev, struct block_device *n,
|
||||
sector_t capacity, int ip[])
|
||||
{
|
||||
ip[0] = 64; /* heads */
|
||||
ip[1] = 32; /* sectors */
|
||||
ip[2] = capacity >> 11; /* cylinders */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset)
|
||||
{
|
||||
int i;
|
||||
struct scatterlist *sl;
|
||||
struct disk_stat stat;
|
||||
struct disk_req req;
|
||||
|
||||
stat.fd = desc[sc->device->id];
|
||||
|
||||
scsi_for_each_sg(sc, sl, scsi_sg_count(sc), i) {
|
||||
req.addr = __pa(sg_virt(sl));
|
||||
req.len = sl->length;
|
||||
if (DBG)
|
||||
printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n",
|
||||
mode == SSC_READ ? "read":"write", req.addr, offset,
|
||||
scsi_sg_count(sc) - i, sl->length);
|
||||
ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
|
||||
ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
|
||||
|
||||
/* should not happen in our case */
|
||||
if (stat.count != req.len) {
|
||||
sc->result = DID_ERROR << 16;
|
||||
return;
|
||||
}
|
||||
offset += sl->length;
|
||||
}
|
||||
sc->result = GOOD;
|
||||
}
|
||||
|
||||
/*
|
||||
* function handling both READ_6/WRITE_6 (non-scatter/gather mode)
|
||||
* commands.
|
||||
* Added 02/26/99 S.Eranian
|
||||
*/
|
||||
static void
|
||||
simscsi_readwrite6 (struct scsi_cmnd *sc, int mode)
|
||||
{
|
||||
unsigned long offset;
|
||||
|
||||
offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512;
|
||||
simscsi_sg_readwrite(sc, mode, offset);
|
||||
}
|
||||
|
||||
static size_t
|
||||
simscsi_get_disk_size (int fd)
|
||||
{
|
||||
struct disk_stat stat;
|
||||
size_t bit, sectors = 0;
|
||||
struct disk_req req;
|
||||
char buf[512];
|
||||
|
||||
/*
|
||||
* This is a bit kludgey: the simulator doesn't provide a
|
||||
* direct way of determining the disk size, so we do a binary
|
||||
* search, assuming a maximum disk size of 128GB.
|
||||
*/
|
||||
for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
|
||||
req.addr = __pa(&buf);
|
||||
req.len = sizeof(buf);
|
||||
ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
|
||||
stat.fd = fd;
|
||||
ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
|
||||
if (stat.count == sizeof(buf))
|
||||
sectors |= bit;
|
||||
}
|
||||
return sectors - 1; /* return last valid sector number */
|
||||
}
|
||||
|
||||
static void
|
||||
simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
|
||||
{
|
||||
unsigned long offset;
|
||||
|
||||
offset = (((unsigned long)sc->cmnd[2] << 24)
|
||||
| ((unsigned long)sc->cmnd[3] << 16)
|
||||
| ((unsigned long)sc->cmnd[4] << 8)
|
||||
| ((unsigned long)sc->cmnd[5] << 0))*512UL;
|
||||
simscsi_sg_readwrite(sc, mode, offset);
|
||||
}
|
||||
|
||||
static int
|
||||
simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
|
||||
{
|
||||
unsigned int target_id = sc->device->id;
|
||||
char fname[MAX_ROOT_LEN+16];
|
||||
size_t disk_size;
|
||||
char *buf;
|
||||
char localbuf[36];
|
||||
#if DEBUG_SIMSCSI
|
||||
register long sp asm ("sp");
|
||||
|
||||
if (DBG)
|
||||
printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%u,sp=%lx,done=%p\n",
|
||||
target_id, sc->cmnd[0], sc->request->tag, sp, done);
|
||||
#endif
|
||||
|
||||
sc->result = DID_BAD_TARGET << 16;
|
||||
sc->scsi_done = done;
|
||||
if (target_id <= 15 && sc->device->lun == 0) {
|
||||
switch (sc->cmnd[0]) {
|
||||
case INQUIRY:
|
||||
if (scsi_bufflen(sc) < 35) {
|
||||
break;
|
||||
}
|
||||
sprintf (fname, "%s%c", simscsi_root, 'a' + target_id);
|
||||
desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS,
|
||||
0, 0, SSC_OPEN);
|
||||
if (desc[target_id] < 0) {
|
||||
/* disk doesn't exist... */
|
||||
break;
|
||||
}
|
||||
buf = localbuf;
|
||||
buf[0] = 0; /* magnetic disk */
|
||||
buf[1] = 0; /* not a removable medium */
|
||||
buf[2] = 2; /* SCSI-2 compliant device */
|
||||
buf[3] = 2; /* SCSI-2 response data format */
|
||||
buf[4] = 31; /* additional length (bytes) */
|
||||
buf[5] = 0; /* reserved */
|
||||
buf[6] = 0; /* reserved */
|
||||
buf[7] = 0; /* various flags */
|
||||
memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28);
|
||||
scsi_sg_copy_from_buffer(sc, buf, 36);
|
||||
sc->result = GOOD;
|
||||
break;
|
||||
|
||||
case TEST_UNIT_READY:
|
||||
sc->result = GOOD;
|
||||
break;
|
||||
|
||||
case READ_6:
|
||||
if (desc[target_id] < 0 )
|
||||
break;
|
||||
simscsi_readwrite6(sc, SSC_READ);
|
||||
break;
|
||||
|
||||
case READ_10:
|
||||
if (desc[target_id] < 0 )
|
||||
break;
|
||||
simscsi_readwrite10(sc, SSC_READ);
|
||||
break;
|
||||
|
||||
case WRITE_6:
|
||||
if (desc[target_id] < 0)
|
||||
break;
|
||||
simscsi_readwrite6(sc, SSC_WRITE);
|
||||
break;
|
||||
|
||||
case WRITE_10:
|
||||
if (desc[target_id] < 0)
|
||||
break;
|
||||
simscsi_readwrite10(sc, SSC_WRITE);
|
||||
break;
|
||||
|
||||
case READ_CAPACITY:
|
||||
if (desc[target_id] < 0 || scsi_bufflen(sc) < 8) {
|
||||
break;
|
||||
}
|
||||
buf = localbuf;
|
||||
disk_size = simscsi_get_disk_size(desc[target_id]);
|
||||
|
||||
buf[0] = (disk_size >> 24) & 0xff;
|
||||
buf[1] = (disk_size >> 16) & 0xff;
|
||||
buf[2] = (disk_size >> 8) & 0xff;
|
||||
buf[3] = (disk_size >> 0) & 0xff;
|
||||
/* set block size of 512 bytes: */
|
||||
buf[4] = 0;
|
||||
buf[5] = 0;
|
||||
buf[6] = 2;
|
||||
buf[7] = 0;
|
||||
scsi_sg_copy_from_buffer(sc, buf, 8);
|
||||
sc->result = GOOD;
|
||||
break;
|
||||
|
||||
case MODE_SENSE:
|
||||
case MODE_SENSE_10:
|
||||
/* sd.c uses this to determine whether disk does write-caching. */
|
||||
scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page,
|
||||
PAGE_SIZE);
|
||||
sc->result = GOOD;
|
||||
break;
|
||||
|
||||
case START_STOP:
|
||||
printk(KERN_ERR "START_STOP\n");
|
||||
break;
|
||||
|
||||
default:
|
||||
panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]);
|
||||
}
|
||||
}
|
||||
if (sc->result == DID_BAD_TARGET) {
|
||||
sc->result |= DRIVER_SENSE << 24;
|
||||
sc->sense_buffer[0] = 0x70;
|
||||
sc->sense_buffer[2] = 0x00;
|
||||
}
|
||||
if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) {
|
||||
panic("Attempt to queue command while command is pending!!");
|
||||
}
|
||||
atomic_inc(&num_reqs);
|
||||
queue[wr].sc = sc;
|
||||
wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN;
|
||||
|
||||
tasklet_schedule(&simscsi_tasklet);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static DEF_SCSI_QCMD(simscsi_queuecommand)
|
||||
|
||||
static int
|
||||
simscsi_host_reset (struct scsi_cmnd *sc)
|
||||
{
|
||||
printk(KERN_ERR "simscsi_host_reset: not implemented\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct scsi_host_template driver_template = {
|
||||
.name = "simulated SCSI host adapter",
|
||||
.proc_name = "simscsi",
|
||||
.queuecommand = simscsi_queuecommand,
|
||||
.eh_host_reset_handler = simscsi_host_reset,
|
||||
.bios_param = simscsi_biosparam,
|
||||
.can_queue = SIMSCSI_REQ_QUEUE_LEN,
|
||||
.this_id = -1,
|
||||
.sg_tablesize = SG_ALL,
|
||||
.max_sectors = 1024,
|
||||
.cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN,
|
||||
.dma_boundary = PAGE_SIZE - 1,
|
||||
};
|
||||
|
||||
static int __init
|
||||
simscsi_init(void)
|
||||
{
|
||||
int error;
|
||||
|
||||
host = scsi_host_alloc(&driver_template, 0);
|
||||
if (!host)
|
||||
return -ENOMEM;
|
||||
|
||||
error = scsi_add_host(host, NULL);
|
||||
if (error)
|
||||
goto free_host;
|
||||
scsi_scan_host(host);
|
||||
return 0;
|
||||
|
||||
free_host:
|
||||
scsi_host_put(host);
|
||||
return error;
|
||||
}
|
||||
device_initcall(simscsi_init);
|
||||
|
|
@ -1,521 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Simulated Serial Driver (fake serial)
|
||||
*
|
||||
* This driver is mostly used for bringup purposes and will go away.
|
||||
* It has a strong dependency on the system console. All outputs
|
||||
* are rerouted to the same facility as the one used by printk which, in our
|
||||
* case means sys_sim.c console (goes via the simulator).
|
||||
*
|
||||
* Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
|
||||
* Stephane Eranian <eranian@hpl.hp.com>
|
||||
* David Mosberger-Tang <davidm@hpl.hp.com>
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/sched/debug.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/tty_flip.h>
|
||||
#include <linux/major.h>
|
||||
#include <linux/fcntl.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/capability.h>
|
||||
#include <linux/circ_buf.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/sysrq.h>
|
||||
#include <linux/uaccess.h>
|
||||
|
||||
#include <asm/hpsim.h>
|
||||
|
||||
#include "hpsim_ssc.h"
|
||||
|
||||
#undef SIMSERIAL_DEBUG /* define this to get some debug information */
|
||||
|
||||
#define KEYBOARD_INTR 3 /* must match with simulator! */
|
||||
|
||||
#define NR_PORTS 1 /* only one port for now */
|
||||
|
||||
struct serial_state {
|
||||
struct tty_port port;
|
||||
struct circ_buf xmit;
|
||||
int irq;
|
||||
int x_char;
|
||||
};
|
||||
|
||||
static struct serial_state rs_table[NR_PORTS];
|
||||
|
||||
struct tty_driver *hp_simserial_driver;
|
||||
|
||||
static struct console *console;
|
||||
|
||||
static void receive_chars(struct tty_port *port)
|
||||
{
|
||||
unsigned char ch;
|
||||
static unsigned char seen_esc = 0;
|
||||
|
||||
while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
|
||||
if (ch == 27 && seen_esc == 0) {
|
||||
seen_esc = 1;
|
||||
continue;
|
||||
} else if (seen_esc == 1 && ch == 'O') {
|
||||
seen_esc = 2;
|
||||
continue;
|
||||
} else if (seen_esc == 2) {
|
||||
if (ch == 'P') /* F1 */
|
||||
show_state();
|
||||
#ifdef CONFIG_MAGIC_SYSRQ
|
||||
if (ch == 'S') { /* F4 */
|
||||
do {
|
||||
ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR);
|
||||
} while (!ch);
|
||||
handle_sysrq(ch);
|
||||
}
|
||||
#endif
|
||||
seen_esc = 0;
|
||||
continue;
|
||||
}
|
||||
seen_esc = 0;
|
||||
|
||||
if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0)
|
||||
break;
|
||||
}
|
||||
tty_flip_buffer_push(port);
|
||||
}
|
||||
|
||||
/*
|
||||
* This is the serial driver's interrupt routine for a single port
|
||||
*/
|
||||
static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
|
||||
{
|
||||
struct serial_state *info = dev_id;
|
||||
|
||||
receive_chars(&info->port);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* -------------------------------------------------------------------
|
||||
* Here ends the serial interrupt routines.
|
||||
* -------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
static int rs_put_char(struct tty_struct *tty, unsigned char ch)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
unsigned long flags;
|
||||
|
||||
if (!info->xmit.buf)
|
||||
return 0;
|
||||
|
||||
local_irq_save(flags);
|
||||
if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
|
||||
local_irq_restore(flags);
|
||||
return 0;
|
||||
}
|
||||
info->xmit.buf[info->xmit.head] = ch;
|
||||
info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
|
||||
local_irq_restore(flags);
|
||||
return 1;
|
||||
}
|
||||
|
||||
static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
|
||||
int *intr_done)
|
||||
{
|
||||
int count;
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
if (info->x_char) {
|
||||
char c = info->x_char;
|
||||
|
||||
console->write(console, &c, 1);
|
||||
|
||||
info->x_char = 0;
|
||||
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (info->xmit.head == info->xmit.tail || tty->stopped) {
|
||||
#ifdef SIMSERIAL_DEBUG
|
||||
printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
|
||||
info->xmit.head, info->xmit.tail, tty->stopped);
|
||||
#endif
|
||||
goto out;
|
||||
}
|
||||
/*
|
||||
* We removed the loop and try to do it in to chunks. We need
|
||||
* 2 operations maximum because it's a ring buffer.
|
||||
*
|
||||
* First from current to tail if possible.
|
||||
* Then from the beginning of the buffer until necessary
|
||||
*/
|
||||
|
||||
count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
|
||||
SERIAL_XMIT_SIZE - info->xmit.tail);
|
||||
console->write(console, info->xmit.buf+info->xmit.tail, count);
|
||||
|
||||
info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
|
||||
|
||||
/*
|
||||
* We have more at the beginning of the buffer
|
||||
*/
|
||||
count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
|
||||
if (count) {
|
||||
console->write(console, info->xmit.buf, count);
|
||||
info->xmit.tail += count;
|
||||
}
|
||||
out:
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static void rs_flush_chars(struct tty_struct *tty)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
|
||||
if (info->xmit.head == info->xmit.tail || tty->stopped ||
|
||||
!info->xmit.buf)
|
||||
return;
|
||||
|
||||
transmit_chars(tty, info, NULL);
|
||||
}
|
||||
|
||||
static int rs_write(struct tty_struct * tty,
|
||||
const unsigned char *buf, int count)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
int c, ret = 0;
|
||||
unsigned long flags;
|
||||
|
||||
if (!info->xmit.buf)
|
||||
return 0;
|
||||
|
||||
local_irq_save(flags);
|
||||
while (1) {
|
||||
c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
|
||||
if (count < c)
|
||||
c = count;
|
||||
if (c <= 0) {
|
||||
break;
|
||||
}
|
||||
memcpy(info->xmit.buf + info->xmit.head, buf, c);
|
||||
info->xmit.head = ((info->xmit.head + c) &
|
||||
(SERIAL_XMIT_SIZE-1));
|
||||
buf += c;
|
||||
count -= c;
|
||||
ret += c;
|
||||
}
|
||||
local_irq_restore(flags);
|
||||
/*
|
||||
* Hey, we transmit directly from here in our case
|
||||
*/
|
||||
if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
|
||||
!tty->stopped)
|
||||
transmit_chars(tty, info, NULL);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int rs_write_room(struct tty_struct *tty)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
|
||||
return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
|
||||
}
|
||||
|
||||
static int rs_chars_in_buffer(struct tty_struct *tty)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
|
||||
return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
|
||||
}
|
||||
|
||||
static void rs_flush_buffer(struct tty_struct *tty)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
info->xmit.head = info->xmit.tail = 0;
|
||||
local_irq_restore(flags);
|
||||
|
||||
tty_wakeup(tty);
|
||||
}
|
||||
|
||||
/*
|
||||
* This function is used to send a high-priority XON/XOFF character to
|
||||
* the device
|
||||
*/
|
||||
static void rs_send_xchar(struct tty_struct *tty, char ch)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
|
||||
info->x_char = ch;
|
||||
if (ch) {
|
||||
/*
|
||||
* I guess we could call console->write() directly but
|
||||
* let's do that for now.
|
||||
*/
|
||||
transmit_chars(tty, info, NULL);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* ------------------------------------------------------------
|
||||
* rs_throttle()
|
||||
*
|
||||
* This routine is called by the upper-layer tty layer to signal that
|
||||
* incoming characters should be throttled.
|
||||
* ------------------------------------------------------------
|
||||
*/
|
||||
static void rs_throttle(struct tty_struct * tty)
|
||||
{
|
||||
if (I_IXOFF(tty))
|
||||
rs_send_xchar(tty, STOP_CHAR(tty));
|
||||
|
||||
printk(KERN_INFO "simrs_throttle called\n");
|
||||
}
|
||||
|
||||
static void rs_unthrottle(struct tty_struct * tty)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
|
||||
if (I_IXOFF(tty)) {
|
||||
if (info->x_char)
|
||||
info->x_char = 0;
|
||||
else
|
||||
rs_send_xchar(tty, START_CHAR(tty));
|
||||
}
|
||||
printk(KERN_INFO "simrs_unthrottle called\n");
|
||||
}
|
||||
|
||||
static int rs_setserial(struct tty_struct *tty, struct serial_struct *ss)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rs_getserial(struct tty_struct *tty, struct serial_struct *ss)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
|
||||
{
|
||||
if ((cmd != TIOCSERCONFIG) && (cmd != TIOCMIWAIT)) {
|
||||
if (tty_io_error(tty))
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
switch (cmd) {
|
||||
case TIOCMIWAIT:
|
||||
return 0;
|
||||
case TIOCSERCONFIG:
|
||||
case TIOCSERGETLSR: /* Get line status register */
|
||||
return -EINVAL;
|
||||
}
|
||||
return -ENOIOCTLCMD;
|
||||
}
|
||||
|
||||
/*
|
||||
* This routine will shutdown a serial port; interrupts are disabled, and
|
||||
* DTR is dropped if the hangup on close termio flag is on.
|
||||
*/
|
||||
static void shutdown(struct tty_port *port)
|
||||
{
|
||||
struct serial_state *info = container_of(port, struct serial_state,
|
||||
port);
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
if (info->irq)
|
||||
free_irq(info->irq, info);
|
||||
|
||||
if (info->xmit.buf) {
|
||||
free_page((unsigned long) info->xmit.buf);
|
||||
info->xmit.buf = NULL;
|
||||
}
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static void rs_close(struct tty_struct *tty, struct file * filp)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
|
||||
tty_port_close(&info->port, tty, filp);
|
||||
}
|
||||
|
||||
static void rs_hangup(struct tty_struct *tty)
|
||||
{
|
||||
struct serial_state *info = tty->driver_data;
|
||||
|
||||
rs_flush_buffer(tty);
|
||||
tty_port_hangup(&info->port);
|
||||
}
|
||||
|
||||
static int activate(struct tty_port *port, struct tty_struct *tty)
|
||||
{
|
||||
struct serial_state *state = container_of(port, struct serial_state,
|
||||
port);
|
||||
unsigned long flags, page;
|
||||
int retval = 0;
|
||||
|
||||
page = get_zeroed_page(GFP_KERNEL);
|
||||
if (!page)
|
||||
return -ENOMEM;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
if (state->xmit.buf)
|
||||
free_page(page);
|
||||
else
|
||||
state->xmit.buf = (unsigned char *) page;
|
||||
|
||||
if (state->irq) {
|
||||
retval = request_irq(state->irq, rs_interrupt_single, 0,
|
||||
"simserial", state);
|
||||
if (retval)
|
||||
goto errout;
|
||||
}
|
||||
|
||||
state->xmit.head = state->xmit.tail = 0;
|
||||
errout:
|
||||
local_irq_restore(flags);
|
||||
return retval;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* This routine is called whenever a serial port is opened. It
|
||||
* enables interrupts for a serial port, linking in its async structure into
|
||||
* the IRQ chain. It also performs the serial-specific
|
||||
* initialization for the tty structure.
|
||||
*/
|
||||
static int rs_open(struct tty_struct *tty, struct file * filp)
|
||||
{
|
||||
struct serial_state *info = rs_table + tty->index;
|
||||
struct tty_port *port = &info->port;
|
||||
|
||||
tty->driver_data = info;
|
||||
port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
|
||||
|
||||
/*
|
||||
* figure out which console to use (should be one already)
|
||||
*/
|
||||
console = console_drivers;
|
||||
while (console) {
|
||||
if ((console->flags & CON_ENABLED) && console->write) break;
|
||||
console = console->next;
|
||||
}
|
||||
|
||||
return tty_port_open(port, tty, filp);
|
||||
}
|
||||
|
||||
/*
|
||||
* /proc fs routines....
|
||||
*/
|
||||
|
||||
static int rs_proc_show(struct seq_file *m, void *v)
|
||||
{
|
||||
int i;
|
||||
|
||||
seq_printf(m, "simserinfo:1.0\n");
|
||||
for (i = 0; i < NR_PORTS; i++)
|
||||
seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n",
|
||||
i, rs_table[i].irq);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct tty_operations hp_ops = {
|
||||
.open = rs_open,
|
||||
.close = rs_close,
|
||||
.write = rs_write,
|
||||
.put_char = rs_put_char,
|
||||
.flush_chars = rs_flush_chars,
|
||||
.write_room = rs_write_room,
|
||||
.chars_in_buffer = rs_chars_in_buffer,
|
||||
.flush_buffer = rs_flush_buffer,
|
||||
.ioctl = rs_ioctl,
|
||||
.throttle = rs_throttle,
|
||||
.unthrottle = rs_unthrottle,
|
||||
.send_xchar = rs_send_xchar,
|
||||
.set_serial = rs_setserial,
|
||||
.get_serial = rs_getserial,
|
||||
.hangup = rs_hangup,
|
||||
.proc_show = rs_proc_show,
|
||||
};
|
||||
|
||||
static const struct tty_port_operations hp_port_ops = {
|
||||
.activate = activate,
|
||||
.shutdown = shutdown,
|
||||
};
|
||||
|
||||
static int __init simrs_init(void)
|
||||
{
|
||||
struct serial_state *state;
|
||||
int retval;
|
||||
|
||||
if (!ia64_platform_is("hpsim"))
|
||||
return -ENODEV;
|
||||
|
||||
hp_simserial_driver = alloc_tty_driver(NR_PORTS);
|
||||
if (!hp_simserial_driver)
|
||||
return -ENOMEM;
|
||||
|
||||
printk(KERN_INFO "SimSerial driver with no serial options enabled\n");
|
||||
|
||||
/* Initialize the tty_driver structure */
|
||||
|
||||
hp_simserial_driver->driver_name = "simserial";
|
||||
hp_simserial_driver->name = "ttyS";
|
||||
hp_simserial_driver->major = TTY_MAJOR;
|
||||
hp_simserial_driver->minor_start = 64;
|
||||
hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
||||
hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
|
||||
hp_simserial_driver->init_termios = tty_std_termios;
|
||||
hp_simserial_driver->init_termios.c_cflag =
|
||||
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
|
||||
hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
|
||||
tty_set_operations(hp_simserial_driver, &hp_ops);
|
||||
|
||||
state = rs_table;
|
||||
tty_port_init(&state->port);
|
||||
state->port.ops = &hp_port_ops;
|
||||
state->port.close_delay = 0; /* XXX really 0? */
|
||||
|
||||
retval = hpsim_get_irq(KEYBOARD_INTR);
|
||||
if (retval < 0) {
|
||||
printk(KERN_ERR "%s: out of interrupt vectors!\n",
|
||||
__func__);
|
||||
goto err_free_tty;
|
||||
}
|
||||
|
||||
state->irq = retval;
|
||||
|
||||
/* the port is imaginary */
|
||||
printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
|
||||
|
||||
tty_port_link_device(&state->port, hp_simserial_driver, 0);
|
||||
retval = tty_register_driver(hp_simserial_driver);
|
||||
if (retval) {
|
||||
printk(KERN_ERR "Couldn't register simserial driver\n");
|
||||
goto err_free_tty;
|
||||
}
|
||||
|
||||
return 0;
|
||||
err_free_tty:
|
||||
put_tty_driver(hp_simserial_driver);
|
||||
tty_port_destroy(&state->port);
|
||||
return retval;
|
||||
}
|
||||
|
||||
#ifndef MODULE
|
||||
__initcall(simrs_init);
|
||||
#endif
|
||||
|
|
@ -37,9 +37,7 @@ const char *acpi_get_sysname (void);
|
|||
#else
|
||||
static inline const char *acpi_get_sysname (void)
|
||||
{
|
||||
# if defined (CONFIG_IA64_HP_SIM)
|
||||
return "hpsim";
|
||||
# elif defined (CONFIG_IA64_HP_ZX1)
|
||||
# if defined (CONFIG_IA64_HP_ZX1)
|
||||
return "hpzx1";
|
||||
# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
|
||||
return "hpzx1_swiotlb";
|
||||
|
|
|
|||
|
|
@ -1,17 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef _ASMIA64_HPSIM_H
|
||||
#define _ASMIA64_HPSIM_H
|
||||
|
||||
#ifndef CONFIG_HP_SIMSERIAL_CONSOLE
|
||||
static inline int simcons_register(void) { return 1; }
|
||||
#else
|
||||
int simcons_register(void);
|
||||
#endif
|
||||
|
||||
struct tty_driver;
|
||||
extern struct tty_driver *hp_simserial_driver;
|
||||
|
||||
extern int hpsim_get_irq(int intr);
|
||||
void ia64_ctl_trace(long on);
|
||||
|
||||
#endif
|
||||
|
|
@ -52,8 +52,6 @@
|
|||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#ifdef CONFIG_IOSAPIC
|
||||
|
||||
#define NR_IOSAPICS 256
|
||||
|
||||
#define iosapic_pcat_compat_init ia64_native_iosapic_pcat_compat_init
|
||||
|
|
@ -103,16 +101,6 @@ extern int __init iosapic_register_platform_intr (u32 int_type,
|
|||
#ifdef CONFIG_NUMA
|
||||
extern void map_iosapic_to_node (unsigned int, int);
|
||||
#endif
|
||||
#else
|
||||
#define iosapic_system_init(pcat_compat) do { } while (0)
|
||||
#define iosapic_init(address,gsi_base) (-EINVAL)
|
||||
#define iosapic_remove(gsi_base) (-ENODEV)
|
||||
#define iosapic_register_intr(gsi,polarity,trigger) (gsi)
|
||||
#define iosapic_unregister_intr(irq) do { } while (0)
|
||||
#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger) do { } while (0)
|
||||
#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
|
||||
polarity,trigger) (gsi)
|
||||
#endif
|
||||
|
||||
# endif /* !__ASSEMBLY__ */
|
||||
#endif /* __ASM_IA64_IOSAPIC_H */
|
||||
|
|
|
|||
|
|
@ -16,7 +16,6 @@
|
|||
struct device;
|
||||
|
||||
typedef void ia64_mv_setup_t (char **);
|
||||
typedef void ia64_mv_irq_init_t (void);
|
||||
typedef void ia64_mv_dma_init (void);
|
||||
typedef const struct dma_map_ops *ia64_mv_dma_get_ops(struct device *);
|
||||
|
||||
|
|
@ -27,9 +26,7 @@ machvec_noop (void)
|
|||
|
||||
extern void machvec_setup (char **);
|
||||
|
||||
# if defined (CONFIG_IA64_HP_SIM)
|
||||
# include <asm/machvec_hpsim.h>
|
||||
# elif defined (CONFIG_IA64_DIG)
|
||||
# if defined (CONFIG_IA64_DIG)
|
||||
# include <asm/machvec_dig.h>
|
||||
# elif defined(CONFIG_IA64_DIG_VTD)
|
||||
# include <asm/machvec_dig_vtd.h>
|
||||
|
|
@ -46,7 +43,6 @@ extern void machvec_setup (char **);
|
|||
# else
|
||||
# define ia64_platform_name ia64_mv.name
|
||||
# define platform_setup ia64_mv.setup
|
||||
# define platform_irq_init ia64_mv.irq_init
|
||||
# define platform_dma_init ia64_mv.dma_init
|
||||
# define platform_dma_get_ops ia64_mv.dma_get_ops
|
||||
# endif
|
||||
|
|
@ -59,7 +55,6 @@ extern void machvec_setup (char **);
|
|||
struct ia64_machine_vector {
|
||||
const char *name;
|
||||
ia64_mv_setup_t *setup;
|
||||
ia64_mv_irq_init_t *irq_init;
|
||||
ia64_mv_dma_init *dma_init;
|
||||
ia64_mv_dma_get_ops *dma_get_ops;
|
||||
} __attribute__((__aligned__(16))); /* align attrib? see above comment */
|
||||
|
|
@ -68,7 +63,6 @@ struct ia64_machine_vector {
|
|||
{ \
|
||||
#name, \
|
||||
platform_setup, \
|
||||
platform_irq_init, \
|
||||
platform_dma_init, \
|
||||
platform_dma_get_ops, \
|
||||
}
|
||||
|
|
@ -91,9 +85,6 @@ extern const struct dma_map_ops *dma_get_ops(struct device *);
|
|||
#ifndef platform_setup
|
||||
# define platform_setup machvec_setup
|
||||
#endif
|
||||
#ifndef platform_irq_init
|
||||
# define platform_irq_init machvec_noop
|
||||
#endif
|
||||
#ifndef platform_dma_init
|
||||
# define platform_dma_init swiotlb_dma_init
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,19 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef _ASM_IA64_MACHVEC_HPSIM_h
|
||||
#define _ASM_IA64_MACHVEC_HPSIM_h
|
||||
|
||||
extern ia64_mv_setup_t hpsim_setup;
|
||||
extern ia64_mv_irq_init_t hpsim_irq_init;
|
||||
|
||||
/*
|
||||
* This stuff has dual use!
|
||||
*
|
||||
* For a generic kernel, the macros are used to initialize the
|
||||
* platform's machvec structure. When compiling a non-generic kernel,
|
||||
* the macros are used directly.
|
||||
*/
|
||||
#define ia64_platform_name "hpsim"
|
||||
#define platform_setup hpsim_setup
|
||||
#define platform_irq_init hpsim_irq_init
|
||||
|
||||
#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
|
||||
|
|
@ -12,13 +12,12 @@ extra-y := head.o vmlinux.lds
|
|||
obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
|
||||
irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \
|
||||
salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
|
||||
unwind.o mca.o mca_asm.o topology.o dma-mapping.o
|
||||
unwind.o mca.o mca_asm.o topology.o dma-mapping.o iosapic.o
|
||||
|
||||
obj-$(CONFIG_ACPI) += acpi.o acpi-ext.o
|
||||
obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o
|
||||
|
||||
obj-$(CONFIG_IA64_PALINFO) += palinfo.o
|
||||
obj-$(CONFIG_IOSAPIC) += iosapic.o
|
||||
obj-$(CONFIG_MODULES) += module.o
|
||||
obj-$(CONFIG_SMP) += smp.o smpboot.o
|
||||
obj-$(CONFIG_NUMA) += numa.o
|
||||
|
|
|
|||
|
|
@ -53,7 +53,6 @@
|
|||
#define IRQ_USED (1)
|
||||
#define IRQ_RSVD (2)
|
||||
|
||||
/* These can be overridden in platform_irq_init */
|
||||
int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR;
|
||||
int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR;
|
||||
|
||||
|
|
@ -648,7 +647,6 @@ init_IRQ (void)
|
|||
#ifdef CONFIG_PERFMON
|
||||
pfm_init_percpu();
|
||||
#endif
|
||||
platform_irq_init();
|
||||
}
|
||||
|
||||
void
|
||||
|
|
|
|||
|
|
@ -63,7 +63,6 @@
|
|||
#include <asm/smp.h>
|
||||
#include <asm/tlbflush.h>
|
||||
#include <asm/unistd.h>
|
||||
#include <asm/hpsim.h>
|
||||
|
||||
#if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE)
|
||||
# error "struct cpuinfo_ia64 too big!"
|
||||
|
|
@ -461,16 +460,11 @@ io_port_init (void)
|
|||
static inline int __init
|
||||
early_console_setup (char *cmdline)
|
||||
{
|
||||
int earlycons = 0;
|
||||
|
||||
#ifdef CONFIG_EFI_PCDP
|
||||
if (!efi_setup_pcdp_console(cmdline))
|
||||
earlycons++;
|
||||
return 0;
|
||||
#endif
|
||||
if (!simcons_register())
|
||||
earlycons++;
|
||||
|
||||
return (earlycons) ? 0 : -1;
|
||||
return -1;
|
||||
}
|
||||
|
||||
static inline void
|
||||
|
|
@ -608,9 +602,6 @@ setup_arch (char **cmdline_p)
|
|||
ia64_mca_init();
|
||||
|
||||
platform_setup(cmdline_p);
|
||||
#ifndef CONFIG_IA64_HP_SIM
|
||||
check_sal_cache_flush();
|
||||
#endif
|
||||
paging_init();
|
||||
|
||||
clear_sched_clock_stable();
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user