LF-605 mmc: sdhci-of-esdhc: update tuning erratum A-008171

There is an official update for eSDHC tuning erratum A-008171.
This patch is to implement the changes,
- Affect all revisions of SoC.
- Changes for tuning window checking.
- Hardware hits a new condition that tuning succeeds although
  the eSDHC might not have tuned properly for type2 SoCs
  (soc_tuning_erratum_type2[] array in driver). So check
  tuning window after tuning succeeds.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
This commit is contained in:
Yangbo Lu 2019-12-12 15:52:19 +08:00
parent 5b1f47eb9d
commit fc01006503

View File

@ -851,20 +851,20 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc,
}
static struct soc_device_attribute soc_tuning_erratum_type1[] = {
{ .family = "QorIQ T1023", .revision = "1.0", },
{ .family = "QorIQ T1040", .revision = "1.0", },
{ .family = "QorIQ T2080", .revision = "1.0", },
{ .family = "QorIQ LS1021A", .revision = "1.0", },
{ .family = "QorIQ T1023", },
{ .family = "QorIQ T1040", },
{ .family = "QorIQ T2080", },
{ .family = "QorIQ LS1021A", },
{ },
};
static struct soc_device_attribute soc_tuning_erratum_type2[] = {
{ .family = "QorIQ LS1012A", .revision = "1.0", },
{ .family = "QorIQ LS1043A", .revision = "1.*", },
{ .family = "QorIQ LS1046A", .revision = "1.0", },
{ .family = "QorIQ LS1080A", .revision = "1.0", },
{ .family = "QorIQ LS2080A", .revision = "1.0", },
{ .family = "QorIQ LA1575A", .revision = "1.0", },
{ .family = "QorIQ LS1012A", },
{ .family = "QorIQ LS1043A", },
{ .family = "QorIQ LS1046A", },
{ .family = "QorIQ LS1080A", },
{ .family = "QorIQ LS2080A", },
{ .family = "QorIQ LA1575A", },
{ },
};
@ -932,13 +932,13 @@ static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start,
/* Write 32'hFFFF_FFFF to IRQSTAT register */
sdhci_writel(host, 0xFFFFFFFF, SDHCI_INT_STATUS);
/* If TBSTAT[15:8]-TBSTAT[7:0] > 4 * div_ratio
* or TBSTAT[7:0]-TBSTAT[15:8] > 4 * div_ratio,
/* If TBSTAT[15:8]-TBSTAT[7:0] > (4 * div_ratio) + 2
* or TBSTAT[7:0]-TBSTAT[15:8] > (4 * div_ratio) + 2,
* then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio
* and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio.
*/
if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio)) {
if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio + 2)) {
*window_start = 8 * esdhc->div_ratio;
*window_end = 4 * esdhc->div_ratio;
} else {
@ -1011,6 +1011,19 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
if (ret)
break;
/* For type2 affected platforms of the tuning erratum,
* tuning may succeed although eSDHC might not have
* tuned properly. Need to check tuning window.
*/
if (esdhc->quirk_tuning_erratum_type2 &&
!host->tuning_err) {
esdhc_tuning_window_ptr(host, &window_start,
&window_end);
if (abs(window_start - window_end) >
(4 * esdhc->div_ratio + 2))
host->tuning_err = -EAGAIN;
}
/* If HW tuning fails and triggers erratum,
* try workaround.
*/