mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 23:36:23 +09:00
net: fsl_ppfe: dts binding for ppfe
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
This commit is contained in:
parent
1082a3ef9e
commit
e424f891ed
173
Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
Normal file
173
Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
Normal file
|
@ -0,0 +1,173 @@
|
|||
=============================================================================
|
||||
NXP Programmable Packet Forwarding Engine Device Bindings
|
||||
|
||||
CONTENTS
|
||||
- PFE Node
|
||||
- Ethernet Node
|
||||
|
||||
=============================================================================
|
||||
PFE Node
|
||||
|
||||
DESCRIPTION
|
||||
|
||||
PFE Node has all the properties associated with Packet Forwarding Engine block.
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Must include "fsl,pfe"
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property.
|
||||
Specifies the offset of the following registers:
|
||||
- PFE configuration registers
|
||||
- DDR memory used by PFE
|
||||
|
||||
- fsl,pfe-num-interfaces
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be present. Value can be either one or two.
|
||||
|
||||
- interrupts
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Three interrupts are specified in this property.
|
||||
- HIF interrupt
|
||||
- HIF NO COPY interrupt
|
||||
- Wake On LAN interrupt
|
||||
|
||||
- interrupt-names
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Following strings are defined for the 3 interrupts.
|
||||
"pfe_hif" - HIF interrupt
|
||||
"pfe_hif_nocpy" - HIF NO COPY interrupt
|
||||
"pfe_wol" - Wake On LAN interrupt
|
||||
|
||||
- memory-region
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: phandle to a node describing reserved memory used by pfe.
|
||||
Refer:- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
|
||||
|
||||
- fsl,pfe-scfg
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: phandle for scfg.
|
||||
|
||||
- fsl,rcpm-wakeup
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: phandle for rcpm.
|
||||
|
||||
- clocks
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: phandle for clockgen.
|
||||
|
||||
- clock-names
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: phandle for clock name.
|
||||
|
||||
EXAMPLE
|
||||
|
||||
pfe: pfe@04000000 {
|
||||
compatible = "fsl,pfe";
|
||||
reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */
|
||||
<0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */
|
||||
reg-names = "pfe", "pfe-ddr";
|
||||
fsl,pfe-num-interfaces = <0x2>;
|
||||
interrupts = <0 172 0x4>, /* HIF interrupt */
|
||||
<0 173 0x4>, /*HIF_NOCPY interrupt */
|
||||
<0 174 0x4>; /* WoL interrupt */
|
||||
interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
|
||||
memory-region = <&pfe_reserved>;
|
||||
fsl,pfe-scfg = <&scfg 0>;
|
||||
fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
|
||||
clocks = <&clockgen 4 0>;
|
||||
clock-names = "pfe";
|
||||
|
||||
status = "okay";
|
||||
pfe_mac0: ethernet@0 {
|
||||
};
|
||||
|
||||
pfe_mac1: ethernet@1 {
|
||||
};
|
||||
};
|
||||
|
||||
=============================================================================
|
||||
Ethernet Node
|
||||
|
||||
DESCRIPTION
|
||||
|
||||
Ethernet Node has all the properties associated with PFE used by platforms to
|
||||
connect to PHY:
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Must include "fsl,pfe-gemac-port"
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property.
|
||||
Specifies the gemacid of the interface.
|
||||
|
||||
- fsl,gemac-bus-id
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be present. Value should be the id of the bus
|
||||
connected to gemac.
|
||||
|
||||
- fsl,gemac-phy-id
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be present. Value should be the id of the phy
|
||||
connected to gemac.
|
||||
|
||||
- fsl,mdio-mux-val
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be present. Value can be either 0 or 2 or 3.
|
||||
This value is used to configure the mux to enable mdio.
|
||||
|
||||
- phy-mode
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Must include "sgmii"
|
||||
|
||||
- fsl,pfe-phy-if-flags
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be present. Value should be 0 by default.
|
||||
If there is not phy connected, this need to be 1.
|
||||
|
||||
- mdio
|
||||
optional subnode that specifies the mdio bus. This has reg
|
||||
property which is used to enable/disable the mdio bus.
|
||||
|
||||
EXAMPLE
|
||||
|
||||
ethernet@0 {
|
||||
compatible = "fsl,pfe-gemac-port";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x0>; /* GEM_ID */
|
||||
fsl,gemac-bus-id = <0x0>; /* BUS_ID */
|
||||
fsl,gemac-phy-id = <0x2>; /* PHY_ID */
|
||||
fsl,mdio-mux-val = <0x0>;
|
||||
phy-mode = "sgmii";
|
||||
fsl,pfe-phy-if-flags = <0x0>;
|
||||
|
||||
mdio@0 {
|
||||
reg = <0x1>; /* enabled/disabled */
|
||||
};
|
||||
};
|
Loading…
Reference in New Issue
Block a user