From 832c4365bd42986b9495f4ea4c86668a78eacf28 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Fri, 4 Oct 2019 16:44:21 +0200 Subject: [PATCH 1/4] ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 Relax qspi pins slew-rate to minimize peak currents. Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board") Signed-off-by: Patrice Chotard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index e4a0d51ec3a8..0a3a7d66737b 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -609,13 +609,13 @@ ; /* QSPI_BK1_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = ; /* QSPI_BK1_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; @@ -637,13 +637,13 @@ ; /* QSPI_BK2_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = ; /* QSPI_BK2_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; From 9df50c2e16de7fd739d11d37303afec9e573b46f Mon Sep 17 00:00:00 2001 From: Christophe Roullier Date: Mon, 4 Nov 2019 15:31:45 +0100 Subject: [PATCH 2/4] ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c Split the 10Kbytes CAN message RAM to be able to use simultaneously FDCAN1 and FDCAN2 instances. First 5Kbytes are allocated to FDCAN1 and last 5Kbytes are used for FDCAN2. To do so, set the offset to 0x1400 in mram-cfg for FDCAN2. Fixes: d44d6e021301 ("ARM: dts: stm32: change CAN RAM mapping on stm32mp157c") Signed-off-by: Christophe Roullier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 9b11654a0a39..f98e0370c0bc 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -932,7 +932,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; status = "disabled"; }; @@ -945,7 +945,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; From afe3af89cd38ebab2e432a54590acb262c3e15ac Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Mon, 4 Nov 2019 11:55:28 +0100 Subject: [PATCH 3/4] ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 "push-pull" configuration is now fully handled by the gpiolib and the STMFX pinctrl driver. There is no longer need to declare a pinctrl group to only configure "push-pull" setting for the line. It is done directly by the gpiolib. Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings") Signed-off-by: Alexandre Torgue Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 89d29b50c3f4..9928d43233ff 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -183,14 +183,12 @@ ov5640: camera@3c { compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&ov5640_pins>; reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; DOVDD-supply = <&v2v8>; - powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; - reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; + reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; status = "okay"; @@ -226,12 +224,6 @@ drive-push-pull; bias-pull-down; }; - - ov5640_pins: camera { - pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ - drive-push-pull; - output-low; - }; }; }; }; From f4d6e0f79bcde7810890563bac8e0f3479fe6d03 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Mon, 4 Nov 2019 11:55:29 +0100 Subject: [PATCH 4/4] ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 Pins used for joystick are all configured as input. "push-pull" is not a valid setting for an input pin. Fixes: a502b343ebd0 ("pinctrl: stmfx: update pinconf settings") Signed-off-by: Alexandre Torgue Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 9928d43233ff..91fc0a315c49 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -221,7 +221,6 @@ joystick_pins: joystick { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; bias-pull-down; }; };