crypto: poly1305 - Add a SSE2 SIMD variant for x86_64

Implements an x86_64 assembler driver for the Poly1305 authenticator. This
single block variant holds the 130-bit integer in 5 32-bit words, but uses
SSE to do two multiplications/additions in parallel.

When calling updates with small blocks, the overhead for kernel_fpu_begin/
kernel_fpu_end() negates the perfmance gain. We therefore use the
poly1305-generic fallback for small updates.

For large messages, throughput increases by ~5-10% compared to
poly1305-generic:

testing speed of poly1305 (poly1305-generic)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 4080026 opers/sec,  391682496 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 6221094 opers/sec,  597225024 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9609750 opers/sec,  922536057 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1459379 opers/sec,  420301267 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2115179 opers/sec,  609171609 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3729874 opers/sec, 1074203856 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  593000 opers/sec,  626208000 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1081536 opers/sec, 1142102332 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  302077 opers/sec,  628320576 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  554384 opers/sec, 1153120176 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  278715 opers/sec, 1150536345 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  140202 opers/sec, 1153022070 bytes/sec

testing speed of poly1305 (poly1305-simd)
test  0 (   96 byte blocks,   16 bytes per update,   6 updates): 3790063 opers/sec,  363846076 bytes/sec
test  1 (   96 byte blocks,   32 bytes per update,   3 updates): 5913378 opers/sec,  567684355 bytes/sec
test  2 (   96 byte blocks,   96 bytes per update,   1 updates): 9352574 opers/sec,  897847104 bytes/sec
test  3 (  288 byte blocks,   16 bytes per update,  18 updates): 1362145 opers/sec,  392297990 bytes/sec
test  4 (  288 byte blocks,   32 bytes per update,   9 updates): 2007075 opers/sec,  578037628 bytes/sec
test  5 (  288 byte blocks,  288 bytes per update,   1 updates): 3709811 opers/sec, 1068425798 bytes/sec
test  6 ( 1056 byte blocks,   32 bytes per update,  33 updates):  566272 opers/sec,  597984182 bytes/sec
test  7 ( 1056 byte blocks, 1056 bytes per update,   1 updates): 1111657 opers/sec, 1173910108 bytes/sec
test  8 ( 2080 byte blocks,   32 bytes per update,  65 updates):  288857 opers/sec,  600823808 bytes/sec
test  9 ( 2080 byte blocks, 2080 bytes per update,   1 updates):  590746 opers/sec, 1228751888 bytes/sec
test 10 ( 4128 byte blocks, 4128 bytes per update,   1 updates):  301825 opers/sec, 1245936902 bytes/sec
test 11 ( 8224 byte blocks, 8224 bytes per update,   1 updates):  153075 opers/sec, 1258896201 bytes/sec

Benchmark results from a Core i5-4670T.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commit is contained in:
Martin Willi 2015-07-16 19:14:06 +02:00 committed by Herbert Xu
parent 2546f811ef
commit c70f4abef0
4 changed files with 413 additions and 0 deletions

View File

@ -31,6 +31,7 @@ obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o
obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o
obj-$(CONFIG_CRYPTO_POLY1305_X86_64) += poly1305-x86_64.o
# These modules require assembler to support AVX.
ifeq ($(avx_supported),yes)
@ -85,6 +86,7 @@ aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o fpu.o
aesni-intel-$(CONFIG_64BIT) += aesni-intel_avx-x86_64.o aes_ctrby8_avx-x86_64.o
ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
sha1-ssse3-y := sha1_ssse3_asm.o sha1_ssse3_glue.o
poly1305-x86_64-y := poly1305-sse2-x86_64.o poly1305_glue.o
ifeq ($(avx2_supported),yes)
sha1-ssse3-y += sha1_avx2_x86_64_asm.o
endif

View File

@ -0,0 +1,276 @@
/*
* Poly1305 authenticator algorithm, RFC7539, x64 SSE2 functions
*
* Copyright (C) 2015 Martin Willi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/linkage.h>
.data
.align 16
ANMASK: .octa 0x0000000003ffffff0000000003ffffff
.text
#define h0 0x00(%rdi)
#define h1 0x04(%rdi)
#define h2 0x08(%rdi)
#define h3 0x0c(%rdi)
#define h4 0x10(%rdi)
#define r0 0x00(%rdx)
#define r1 0x04(%rdx)
#define r2 0x08(%rdx)
#define r3 0x0c(%rdx)
#define r4 0x10(%rdx)
#define s1 0x00(%rsp)
#define s2 0x04(%rsp)
#define s3 0x08(%rsp)
#define s4 0x0c(%rsp)
#define m %rsi
#define h01 %xmm0
#define h23 %xmm1
#define h44 %xmm2
#define t1 %xmm3
#define t2 %xmm4
#define t3 %xmm5
#define t4 %xmm6
#define mask %xmm7
#define d0 %r8
#define d1 %r9
#define d2 %r10
#define d3 %r11
#define d4 %r12
ENTRY(poly1305_block_sse2)
# %rdi: Accumulator h[5]
# %rsi: 16 byte input block m
# %rdx: Poly1305 key r[5]
# %rcx: Block count
# This single block variant tries to improve performance by doing two
# multiplications in parallel using SSE instructions. There is quite
# some quardword packing involved, hence the speedup is marginal.
push %rbx
push %r12
sub $0x10,%rsp
# s1..s4 = r1..r4 * 5
mov r1,%eax
lea (%eax,%eax,4),%eax
mov %eax,s1
mov r2,%eax
lea (%eax,%eax,4),%eax
mov %eax,s2
mov r3,%eax
lea (%eax,%eax,4),%eax
mov %eax,s3
mov r4,%eax
lea (%eax,%eax,4),%eax
mov %eax,s4
movdqa ANMASK(%rip),mask
.Ldoblock:
# h01 = [0, h1, 0, h0]
# h23 = [0, h3, 0, h2]
# h44 = [0, h4, 0, h4]
movd h0,h01
movd h1,t1
movd h2,h23
movd h3,t2
movd h4,h44
punpcklqdq t1,h01
punpcklqdq t2,h23
punpcklqdq h44,h44
# h01 += [ (m[3-6] >> 2) & 0x3ffffff, m[0-3] & 0x3ffffff ]
movd 0x00(m),t1
movd 0x03(m),t2
psrld $2,t2
punpcklqdq t2,t1
pand mask,t1
paddd t1,h01
# h23 += [ (m[9-12] >> 6) & 0x3ffffff, (m[6-9] >> 4) & 0x3ffffff ]
movd 0x06(m),t1
movd 0x09(m),t2
psrld $4,t1
psrld $6,t2
punpcklqdq t2,t1
pand mask,t1
paddd t1,h23
# h44 += [ (m[12-15] >> 8) | (1 << 24), (m[12-15] >> 8) | (1 << 24) ]
mov 0x0c(m),%eax
shr $8,%eax
or $0x01000000,%eax
movd %eax,t1
pshufd $0xc4,t1,t1
paddd t1,h44
# t1[0] = h0 * r0 + h2 * s3
# t1[1] = h1 * s4 + h3 * s2
movd r0,t1
movd s4,t2
punpcklqdq t2,t1
pmuludq h01,t1
movd s3,t2
movd s2,t3
punpcklqdq t3,t2
pmuludq h23,t2
paddq t2,t1
# t2[0] = h0 * r1 + h2 * s4
# t2[1] = h1 * r0 + h3 * s3
movd r1,t2
movd r0,t3
punpcklqdq t3,t2
pmuludq h01,t2
movd s4,t3
movd s3,t4
punpcklqdq t4,t3
pmuludq h23,t3
paddq t3,t2
# t3[0] = h4 * s1
# t3[1] = h4 * s2
movd s1,t3
movd s2,t4
punpcklqdq t4,t3
pmuludq h44,t3
# d0 = t1[0] + t1[1] + t3[0]
# d1 = t2[0] + t2[1] + t3[1]
movdqa t1,t4
punpcklqdq t2,t4
punpckhqdq t2,t1
paddq t4,t1
paddq t3,t1
movq t1,d0
psrldq $8,t1
movq t1,d1
# t1[0] = h0 * r2 + h2 * r0
# t1[1] = h1 * r1 + h3 * s4
movd r2,t1
movd r1,t2
punpcklqdq t2,t1
pmuludq h01,t1
movd r0,t2
movd s4,t3
punpcklqdq t3,t2
pmuludq h23,t2
paddq t2,t1
# t2[0] = h0 * r3 + h2 * r1
# t2[1] = h1 * r2 + h3 * r0
movd r3,t2
movd r2,t3
punpcklqdq t3,t2
pmuludq h01,t2
movd r1,t3
movd r0,t4
punpcklqdq t4,t3
pmuludq h23,t3
paddq t3,t2
# t3[0] = h4 * s3
# t3[1] = h4 * s4
movd s3,t3
movd s4,t4
punpcklqdq t4,t3
pmuludq h44,t3
# d2 = t1[0] + t1[1] + t3[0]
# d3 = t2[0] + t2[1] + t3[1]
movdqa t1,t4
punpcklqdq t2,t4
punpckhqdq t2,t1
paddq t4,t1
paddq t3,t1
movq t1,d2
psrldq $8,t1
movq t1,d3
# t1[0] = h0 * r4 + h2 * r2
# t1[1] = h1 * r3 + h3 * r1
movd r4,t1
movd r3,t2
punpcklqdq t2,t1
pmuludq h01,t1
movd r2,t2
movd r1,t3
punpcklqdq t3,t2
pmuludq h23,t2
paddq t2,t1
# t3[0] = h4 * r0
movd r0,t3
pmuludq h44,t3
# d4 = t1[0] + t1[1] + t3[0]
movdqa t1,t4
psrldq $8,t4
paddq t4,t1
paddq t3,t1
movq t1,d4
# d1 += d0 >> 26
mov d0,%rax
shr $26,%rax
add %rax,d1
# h0 = d0 & 0x3ffffff
mov d0,%rbx
and $0x3ffffff,%ebx
# d2 += d1 >> 26
mov d1,%rax
shr $26,%rax
add %rax,d2
# h1 = d1 & 0x3ffffff
mov d1,%rax
and $0x3ffffff,%eax
mov %eax,h1
# d3 += d2 >> 26
mov d2,%rax
shr $26,%rax
add %rax,d3
# h2 = d2 & 0x3ffffff
mov d2,%rax
and $0x3ffffff,%eax
mov %eax,h2
# d4 += d3 >> 26
mov d3,%rax
shr $26,%rax
add %rax,d4
# h3 = d3 & 0x3ffffff
mov d3,%rax
and $0x3ffffff,%eax
mov %eax,h3
# h0 += (d4 >> 26) * 5
mov d4,%rax
shr $26,%rax
lea (%eax,%eax,4),%eax
add %eax,%ebx
# h4 = d4 & 0x3ffffff
mov d4,%rax
and $0x3ffffff,%eax
mov %eax,h4
# h1 += h0 >> 26
mov %ebx,%eax
shr $26,%eax
add %eax,h1
# h0 = h0 & 0x3ffffff
andl $0x3ffffff,%ebx
mov %ebx,h0
add $0x10,m
dec %rcx
jnz .Ldoblock
add $0x10,%rsp
pop %r12
pop %rbx
ret
ENDPROC(poly1305_block_sse2)

View File

@ -0,0 +1,123 @@
/*
* Poly1305 authenticator algorithm, RFC7539, SIMD glue code
*
* Copyright (C) 2015 Martin Willi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <crypto/algapi.h>
#include <crypto/internal/hash.h>
#include <crypto/poly1305.h>
#include <linux/crypto.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/fpu/api.h>
#include <asm/simd.h>
asmlinkage void poly1305_block_sse2(u32 *h, const u8 *src,
const u32 *r, unsigned int blocks);
static unsigned int poly1305_simd_blocks(struct poly1305_desc_ctx *dctx,
const u8 *src, unsigned int srclen)
{
unsigned int blocks, datalen;
if (unlikely(!dctx->sset)) {
datalen = crypto_poly1305_setdesckey(dctx, src, srclen);
src += srclen - datalen;
srclen = datalen;
}
if (srclen >= POLY1305_BLOCK_SIZE) {
blocks = srclen / POLY1305_BLOCK_SIZE;
poly1305_block_sse2(dctx->h, src, dctx->r, blocks);
srclen -= POLY1305_BLOCK_SIZE * blocks;
}
return srclen;
}
static int poly1305_simd_update(struct shash_desc *desc,
const u8 *src, unsigned int srclen)
{
struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
unsigned int bytes;
/* kernel_fpu_begin/end is costly, use fallback for small updates */
if (srclen <= 288 || !may_use_simd())
return crypto_poly1305_update(desc, src, srclen);
kernel_fpu_begin();
if (unlikely(dctx->buflen)) {
bytes = min(srclen, POLY1305_BLOCK_SIZE - dctx->buflen);
memcpy(dctx->buf + dctx->buflen, src, bytes);
src += bytes;
srclen -= bytes;
dctx->buflen += bytes;
if (dctx->buflen == POLY1305_BLOCK_SIZE) {
poly1305_simd_blocks(dctx, dctx->buf,
POLY1305_BLOCK_SIZE);
dctx->buflen = 0;
}
}
if (likely(srclen >= POLY1305_BLOCK_SIZE)) {
bytes = poly1305_simd_blocks(dctx, src, srclen);
src += srclen - bytes;
srclen = bytes;
}
kernel_fpu_end();
if (unlikely(srclen)) {
dctx->buflen = srclen;
memcpy(dctx->buf, src, srclen);
}
return 0;
}
static struct shash_alg alg = {
.digestsize = POLY1305_DIGEST_SIZE,
.init = crypto_poly1305_init,
.update = poly1305_simd_update,
.final = crypto_poly1305_final,
.setkey = crypto_poly1305_setkey,
.descsize = sizeof(struct poly1305_desc_ctx),
.base = {
.cra_name = "poly1305",
.cra_driver_name = "poly1305-simd",
.cra_priority = 300,
.cra_flags = CRYPTO_ALG_TYPE_SHASH,
.cra_alignmask = sizeof(u32) - 1,
.cra_blocksize = POLY1305_BLOCK_SIZE,
.cra_module = THIS_MODULE,
},
};
static int __init poly1305_simd_mod_init(void)
{
if (!cpu_has_xmm2)
return -ENODEV;
return crypto_register_shash(&alg);
}
static void __exit poly1305_simd_mod_exit(void)
{
crypto_unregister_shash(&alg);
}
module_init(poly1305_simd_mod_init);
module_exit(poly1305_simd_mod_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Martin Willi <martin@strongswan.org>");
MODULE_DESCRIPTION("Poly1305 authenticator");
MODULE_ALIAS_CRYPTO("poly1305");
MODULE_ALIAS_CRYPTO("poly1305-simd");

View File

@ -470,6 +470,18 @@ config CRYPTO_POLY1305
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the portable C implementation of Poly1305.
config CRYPTO_POLY1305_X86_64
tristate "Poly1305 authenticator algorithm (x86_64/SSE2)"
depends on X86 && 64BIT
select CRYPTO_POLY1305
help
Poly1305 authenticator algorithm, RFC7539.
Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the x86_64 assembler implementation using SIMD
instructions.
config CRYPTO_MD4
tristate "MD4 digest algorithm"
select CRYPTO_HASH