Documentation: Remove ZBOOT MMC/SDHI utility and docs

Remove ZBOOT MMC/SDHI Documentation for sh7372 together
wit the vrl4 utility. Without sh7372 and Mackerel support
these files are no longer useful.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
Magnus Damm 2015-01-26 15:19:51 +09:00 committed by Simon Horman
parent edf4100906
commit c6535e1e03
6 changed files with 1 additions and 250 deletions

View File

@ -1,4 +1,4 @@
subdir-y := accounting arm auxdisplay blackfin connector \
subdir-y := accounting auxdisplay blackfin connector \
filesystems filesystems ia64 laptops mic misc-devices \
networking pcmcia prctl ptp spi timers vDSO video4linux \
watchdog

View File

@ -1 +0,0 @@
subdir-y := SH-Mobile

View File

@ -1,7 +0,0 @@
# List of programs to build
hostprogs-y := vrl4
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_vrl4.o += -I$(objtree)/usr/include -I$(srctree)/tools/include

View File

@ -1,170 +0,0 @@
/*
* vrl4 format generator
*
* Copyright (C) 2010 Simon Horman
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
/*
* usage: vrl4 < zImage > out
* dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
*
* Reads a zImage from stdin and writes a vrl4 image to stdout.
* In practice this means writing a padded vrl4 header to stdout followed
* by the zImage.
*
* The padding places the zImage at ALIGN bytes into the output.
* The vrl4 uses ALIGN + START_BASE as the start_address.
* This is where the mask ROM will jump to after verifying the header.
*
* The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
* That is, the mask ROM will load the padded header (ALIGN bytes)
* And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
* whichever is smaller.
*
* The zImage is not modified in any way.
*/
#define _BSD_SOURCE
#include <endian.h>
#include <unistd.h>
#include <stdint.h>
#include <stdio.h>
#include <errno.h>
#include <tools/endian.h>
struct hdr {
uint32_t magic1;
uint32_t reserved1;
uint32_t magic2;
uint32_t reserved2;
uint16_t copy_size;
uint16_t boot_options;
uint32_t reserved3;
uint32_t start_address;
uint32_t reserved4;
uint32_t reserved5;
char reserved6[308];
};
#define DECLARE_HDR(h) \
struct hdr (h) = { \
.magic1 = htole32(0xea000000), \
.reserved1 = htole32(0x56), \
.magic2 = htole32(0xe59ff008), \
.reserved3 = htole16(0x1) }
/* Align to 512 bytes, the MMCIF sector size */
#define ALIGN_BITS 9
#define ALIGN (1 << ALIGN_BITS)
#define START_BASE 0xe55b0000
/*
* With an alignment of 512 the header uses the first sector.
* There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
* So there are 127 sectors left for the boot programme. But in practice
* Only a small portion of a zImage is needed, 16 sectors should be more
* than enough.
*
* Note that this sets how much of the zImage is copied by the mask ROM.
* The entire zImage is present after the header and is loaded
* by the code in the boot program (which is the first portion of the zImage).
*/
#define MAX_BOOT_PROG_LEN (16 * 512)
#define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1))
static ssize_t do_read(int fd, void *buf, size_t count)
{
size_t offset = 0;
ssize_t l;
while (offset < count) {
l = read(fd, buf + offset, count - offset);
if (!l)
break;
if (l < 0) {
if (errno == EAGAIN || errno == EWOULDBLOCK)
continue;
perror("read");
return -1;
}
offset += l;
}
return offset;
}
static ssize_t do_write(int fd, const void *buf, size_t count)
{
size_t offset = 0;
ssize_t l;
while (offset < count) {
l = write(fd, buf + offset, count - offset);
if (l < 0) {
if (errno == EAGAIN || errno == EWOULDBLOCK)
continue;
perror("write");
return -1;
}
offset += l;
}
return offset;
}
static ssize_t write_zero(int fd, size_t len)
{
size_t i = len;
while (i--) {
const char x = 0;
if (do_write(fd, &x, 1) < 0)
return -1;
}
return len;
}
int main(void)
{
DECLARE_HDR(hdr);
char boot_program[MAX_BOOT_PROG_LEN];
size_t aligned_hdr_len, alligned_prog_len;
ssize_t prog_len;
prog_len = do_read(0, boot_program, sizeof(boot_program));
if (prog_len <= 0)
return -1;
aligned_hdr_len = ROUND_UP(sizeof(hdr));
hdr.start_address = htole32(START_BASE + aligned_hdr_len);
alligned_prog_len = ROUND_UP(prog_len);
hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
if (do_write(1, &hdr, sizeof(hdr)) < 0)
return -1;
if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
return -1;
if (do_write(1, boot_program, prog_len) < 0)
return 1;
/* Write out the rest of the kernel */
while (1) {
prog_len = do_read(0, boot_program, sizeof(boot_program));
if (prog_len < 0)
return 1;
if (prog_len == 0)
break;
if (do_write(1, boot_program, prog_len) < 0)
return 1;
}
return 0;
}

View File

@ -1,29 +0,0 @@
ROM-able zImage boot from MMC
-----------------------------
An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
This is achieved by the mask ROM loading the first portion of the image into
MERAM and then jumping to it. This portion contains loader code which
copies the entire image to SDRAM and jumps to it. From there the zImage
boot code proceeds as normal, uncompressing the image into its final
location and then jumping to it.
This code has been tested on an AP4EB board using the developer 1A eMMC
boot mode which is configured using the following jumper settings.
The board used for testing required a patched mask ROM in order for
this mode to function.
8 7 6 5 4 3 2 1
x|x|x|x|x| |x|
S4 -+-+-+-+-+-+-+-
| | | | |x| |x on
The zImage must be written to the MMC card at sector 1 (512 bytes) in
vrl4 format. A utility vrl4 is supplied to accomplish this.
e.g.
vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
A dual-voltage MMC 4.0 card was used for testing.

View File

@ -1,42 +0,0 @@
ROM-able zImage boot from eSD
-----------------------------
An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and
SuperH Mobile ARM will to boot directly from the SDHI hardware block.
This is achieved by the mask ROM loading the first portion of the image into
MERAM and then jumping to it. This portion contains loader code which
copies the entire image to SDRAM and jumps to it. From there the zImage
boot code proceeds as normal, uncompressing the image into its final
location and then jumping to it.
This code has been tested on an mackerel board using the developer 1A eSD
boot mode which is configured using the following jumper settings.
8 7 6 5 4 3 2 1
x|x|x|x| |x|x|
S4 -+-+-+-+-+-+-+-
| | | |x| | |x on
The eSD card needs to be present in SDHI slot 1 (CN7).
As such S1 and S33 also need to be configured as per
the notes in arch/arm/mach-shmobile/board-mackerel.c.
A partial zImage must be written to physical partition #1 (boot)
of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to
accomplish this.
e.g.
vrl4 < zImage | dd of=/dev/sdX bs=512 count=17
A full copy of _the same_ zImage should be written to physical partition #1
(boot) of the eSD at sector 0. This should _not_ be in vrl4 format.
vrl4 < zImage | dd of=/dev/sdX bs=512
Note: The commands above assume that the physical partition has been
switched. No such facility currently exists in the Linux Kernel.
Physical partitions are described in the eSD specification. At the time of
writing they are not the same as partitions that are typically configured
using fdisk and visible through /proc/partitions