power supply and reset changes for the v4.19 series

* Improve support for TI bq20z75 in sbs-battery
 * Add Qualcomm PM8xxx reboot driver
 * Add cros-ec USBPD charger driver
 * Move ds2760 battery driver from w1 to power-supply and add DT support
 * Misc. fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlt8iTUACgkQ2O7X88g7
 +poDsQ//WKpd+hI0poP4X4MZ6cV3kmZH9u4Tbx1MsG7lywIE8BZZ+JQmeix9fmWp
 05reMM95zrgbWesY72/2Zpdj7G2IiNWPgaTCnBymyhcWM0y1gwM6ftHvY/Ed+pxz
 in4vjzwE0VIYK/lE64Evr1V8SqpKTtM3fco0M0snkrgyJ9FmAuT+fbnEyqNNdjHm
 hUSTRZGW6Cv1TFyhgf8bEm7s2paT5uhuABuaKYM2/XQ7PYTjF7IRA7QY871h2y6n
 9GQ7uZxtjYRTsQ5uBh1DDFuN56pvXFY1sdJxNtry+/JbQSIvzdHAVbS3mRYgbajJ
 ALfy2bKadNslbew5VSaEEswTNSZOcQ8/MNlA2o6C64mSbQ2gUfBB3wkWduO4o1jd
 uTAbCGYGCf89RocG53CieLIphK752Igd+41kkANZm0H5hu4bjNuZr1nHY1ynZSWG
 NNN1vus/IjPhd92Sx6joKHbOu9LXUukM/EQBHOGXUpgsh9zNmLnCVLLgH+jG792C
 uT3Sh4qHliWxfajd7uVR6ytALVgz6Vtp9Ry+SpOIgXMGYzcHH0x4H3Cn1gcgwu3O
 1PrTFk0+kgjZ7eOLz0X2niE3YE/+WvKKkjpf9fnimFhxppxdIA2aoJseXmYex6A2
 1tsos9wlV+Th5FAVAilq1DTKwGQ3UGTYNYbPbOaQtt9qimbCuYc=
 =UTGp
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...
This commit is contained in:
Linus Torvalds 2018-08-21 18:06:27 -07:00
commit c1fecabecc
36 changed files with 1931 additions and 408 deletions

View File

@ -0,0 +1,45 @@
Qualcomm PON Device
The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
and resin along with the Android reboot-mode.
This DT node has pwrkey and resin as sub nodes.
Required Properties:
-compatible: "qcom,pm8916-pon"
-reg: Specifies the physical address of the pon register
Optional subnode:
-pwrkey: Specifies the subnode pwrkey and should follow the
qcom,pm8941-pwrkey.txt description.
-resin: Specifies the subnode resin and should follow the
qcom,pm8xxx-pwrkey.txt description.
The rest of the properties should follow the generic reboot-mode description
found in reboot-mode.txt
Example:
pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};

View File

@ -0,0 +1,26 @@
Devicetree bindings for Maxim DS2760
====================================
The ds2760 is a w1 slave device and must hence have its sub-node in DT
under a w1 bus master node.
The device exposes a power supply, so the details described in
Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
Required properties:
- compatible: must be "maxim,ds2760"
Optional properties:
- power-supplies: Refers to one or more power supplies connected to
this battery.
- maxim,pmod-enabled: This boolean property enables the DS2760 to enter
sleep mode when the DQ line goes low for greater
than 2 seconds and leave sleep Mode when the DQ
line goes high.
- maxim,cache-time-ms: Time im milliseconds to cache the data for. When
this time expires, the values are read again from
the hardware. Defaults to 1000.
- rated-capacity-microamp-hours:
The rated capacity of the battery, in mAh.
If not specified, the value stored in the
non-volatile chip memory is used.

View File

@ -2,7 +2,11 @@ SBS sbs-battery
~~~~~~~~~~
Required properties :
- compatible : "sbs,sbs-battery"
- compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
part number compatible string might be used in order to take care of
vendor specific registers.
Known <vendor>,<part-number>:
ti,bq20z75
Optional properties :
- sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
@ -14,9 +18,9 @@ Optional properties :
Example:
bq20z75@b {
compatible = "sbs,sbs-battery";
reg = < 0xb >;
battery@b {
compatible = "ti,bq20z75", "sbs,sbs-battery";
reg = <0xb>;
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <10>;
sbs,battery-detect-gpios = <&gpio-controller 122 1>;

View File

@ -13,10 +13,15 @@ Optional properties:
- linux,open-drain: if specified, the data pin is considered in
open-drain mode.
Also refer to the generic w1.txt document.
Examples:
onewire {
compatible = "w1-gpio";
gpios = <&gpio 126 0>, <&gpio 105 0>;
};
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
battery {
// ...
};
};

View File

@ -0,0 +1,25 @@
Generic devicetree bindings for onewire (w1) busses
===================================================
Onewire busses are described through nodes of their master bus controller.
Slave devices are listed as sub-nodes of such master devices. For now, only
one slave is allowed per bus master.
Example:
charger: charger {
compatible = "gpio-charger";
charger-type = "mains";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
onewire {
compatible = "w1-gpio";
gpios = <&gpio 100 0>, <&gpio 101 0>;
battery {
compatible = "maxim,ds2760";
power-supplies = <&charger>;
};
};

View File

@ -842,6 +842,13 @@ S: Supported
F: drivers/mux/adgs1408.c
F: Documentation/devicetree/bindings/mux/adgs1408.txt
ANALOG DEVICES INC ADP5061 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
L: linux-pm@vger.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/power/supply/adp5061.c
ANALOG DEVICES INC ADV7180 DRIVER
M: Lars-Peter Clausen <lars@metafoo.de>
L: linux-media@vger.kernel.org

View File

@ -104,6 +104,17 @@ config POWER_RESET_MSM
help
Power off and restart support for Qualcomm boards.
config POWER_RESET_QCOM_PON
tristate "Qualcomm power-on driver"
depends on ARCH_QCOM
depends on MFD_SPMI_PMIC
select REBOOT_MODE
help
Power On support for Qualcomm boards.
If you have a Qualcomm platform and need support for
power-on and reboot reason, Say Y.
If unsure, Say N.
config POWER_RESET_OCELOT_RESET
bool "Microsemi Ocelot reset driver"
depends on MSCC_OCELOT || COMPILE_TEST

View File

@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o

View File

@ -130,7 +130,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
val |= GEMINI_CTRL_ENABLE;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
/* Now that the state machine is active, clear the IRQ */
/* Clear the IRQ */
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
/* Wait for this to clear */
val = readl(gpw->base + GEMINI_PWC_STATREG);
while (val & 0x70U)
val = readl(gpw->base + GEMINI_PWC_STATREG);
/* Clear the IRQ again */
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);

View File

@ -0,0 +1,91 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-18 Linaro Limited
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/reboot-mode.h>
#include <linux/regmap.h>
#define PON_SOFT_RB_SPARE 0x8f
struct pm8916_pon {
struct device *dev;
struct regmap *regmap;
u32 baseaddr;
struct reboot_mode_driver reboot_mode;
};
static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
unsigned int magic)
{
struct pm8916_pon *pon = container_of
(reboot, struct pm8916_pon, reboot_mode);
int ret;
ret = regmap_update_bits(pon->regmap,
pon->baseaddr + PON_SOFT_RB_SPARE,
0xfc, magic << 2);
if (ret < 0)
dev_err(pon->dev, "update reboot mode bits failed\n");
return ret;
}
static int pm8916_pon_probe(struct platform_device *pdev)
{
struct pm8916_pon *pon;
int error;
pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
if (!pon)
return -ENOMEM;
pon->dev = &pdev->dev;
pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!pon->regmap) {
dev_err(&pdev->dev, "failed to locate regmap\n");
return -ENODEV;
}
error = of_property_read_u32(pdev->dev.of_node, "reg",
&pon->baseaddr);
if (error)
return error;
pon->reboot_mode.dev = &pdev->dev;
pon->reboot_mode.write = pm8916_reboot_mode_write;
error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
if (error) {
dev_err(&pdev->dev, "can't register reboot mode\n");
return error;
}
platform_set_drvdata(pdev, pon);
return devm_of_platform_populate(&pdev->dev);
}
static const struct of_device_id pm8916_pon_id_table[] = {
{ .compatible = "qcom,pm8916-pon" },
{ }
};
MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
static struct platform_driver pm8916_pon_driver = {
.probe = pm8916_pon_probe,
.driver = {
.name = "pm8916-pon",
.of_match_table = of_match_ptr(pm8916_pon_id_table),
},
};
module_platform_driver(pm8916_pon_driver);
MODULE_DESCRIPTION("pm8916 Power On driver");
MODULE_LICENSE("GPL v2");

View File

@ -35,6 +35,7 @@ static void vexpress_reset_do(struct device *dev, const char *what)
}
static struct device *vexpress_power_off_device;
static atomic_t vexpress_restart_nb_refcnt = ATOMIC_INIT(0);
static void vexpress_power_off(void)
{
@ -99,10 +100,13 @@ static int _vexpress_register_restart_handler(struct device *dev)
int err;
vexpress_restart_device = dev;
err = register_restart_handler(&vexpress_restart_nb);
if (err) {
dev_err(dev, "cannot register restart handler (err=%d)\n", err);
return err;
if (atomic_inc_return(&vexpress_restart_nb_refcnt) == 1) {
err = register_restart_handler(&vexpress_restart_nb);
if (err) {
dev_err(dev, "cannot register restart handler (err=%d)\n", err);
atomic_dec(&vexpress_restart_nb_refcnt);
return err;
}
}
device_create_file(dev, &dev_attr_active);

View File

@ -51,6 +51,7 @@ static int zx_reboot_probe(struct platform_device *pdev)
np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
pcu_base = of_iomap(np, 0);
of_node_put(np);
if (!pcu_base) {
iounmap(base);
WARN(1, "failed to map pcu_base address");

View File

@ -75,6 +75,17 @@ config BATTERY_88PM860X
help
Say Y here to enable battery monitor for Marvell 88PM860x chip.
config CHARGER_ADP5061
tristate "ADP5061 battery charger driver"
depends on I2C
select REGMAP_I2C
help
Say Y here to enable support for the ADP5061 standalone battery
charger.
This driver can be built as a module. If so, the module will be
called adp5061.
config BATTERY_ACT8945A
tristate "Active-semi ACT8945A charger driver"
depends on MFD_ACT8945A || COMPILE_TEST
@ -92,7 +103,7 @@ config BATTERY_CPCAP
config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)"
depends on W1 && W1_SLAVE_DS2760
depends on W1
help
Say Y here to enable support for batteries with ds2760 chip.
@ -624,4 +635,14 @@ config CHARGER_RT9455
help
Say Y to enable support for Richtek RT9455 battery charger.
config CHARGER_CROS_USBPD
tristate "ChromeOS EC based USBPD charger"
depends on MFD_CROS_EC
default n
help
Say Y here to enable ChromeOS EC based USBPD charger
driver. This driver gets various bits of information about
what is connected to USB PD ports from the EC and converts
that into power_supply properties.
endif # POWER_SUPPLY

View File

@ -18,6 +18,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_TEST_POWER) += test_power.o
obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o
obj-$(CONFIG_CHARGER_ADP5061) += adp5061.o
obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o
obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
@ -83,3 +84,4 @@ obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o

View File

@ -379,15 +379,13 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
*/
static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
{
struct timespec64 ts64;
time64_t now = ktime_get_boottime_seconds();
struct ab8500_fg_avg_cap *avg = &di->avg_cap;
getnstimeofday64(&ts64);
do {
avg->sum += sample - avg->samples[avg->pos];
avg->samples[avg->pos] = sample;
avg->time_stamps[avg->pos] = ts64.tv_sec;
avg->time_stamps[avg->pos] = now;
avg->pos++;
if (avg->pos == NBR_AVG_SAMPLES)
@ -400,7 +398,7 @@ static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
* Check the time stamp for each sample. If too old,
* replace with latest sample
*/
} while (ts64.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
} while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
avg->avg = avg->sum / avg->nbr_samples;
@ -439,14 +437,14 @@ static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
{
int i;
struct timespec64 ts64;
time64_t now;
struct ab8500_fg_avg_cap *avg = &di->avg_cap;
getnstimeofday64(&ts64);
now = ktime_get_boottime_seconds();
for (i = 0; i < NBR_AVG_SAMPLES; i++) {
avg->samples[i] = sample;
avg->time_stamps[i] = ts64.tv_sec;
avg->time_stamps[i] = now;
}
avg->pos = 0;

View File

@ -0,0 +1,745 @@
/*
* ADP5061 I2C Programmable Linear Battery Charger
*
* Copyright 2018 Analog Devices Inc.
*
* Licensed under the GPL-2.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/mod_devicetable.h>
#include <linux/power_supply.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/regmap.h>
/* ADP5061 registers definition */
#define ADP5061_ID 0x00
#define ADP5061_REV 0x01
#define ADP5061_VINX_SET 0x02
#define ADP5061_TERM_SET 0x03
#define ADP5061_CHG_CURR 0x04
#define ADP5061_VOLTAGE_TH 0x05
#define ADP5061_TIMER_SET 0x06
#define ADP5061_FUNC_SET_1 0x07
#define ADP5061_FUNC_SET_2 0x08
#define ADP5061_INT_EN 0x09
#define ADP5061_INT_ACT 0x0A
#define ADP5061_CHG_STATUS_1 0x0B
#define ADP5061_CHG_STATUS_2 0x0C
#define ADP5061_FAULT 0x0D
#define ADP5061_BATTERY_SHORT 0x10
#define ADP5061_IEND 0x11
/* ADP5061_VINX_SET */
#define ADP5061_VINX_SET_ILIM_MSK GENMASK(3, 0)
#define ADP5061_VINX_SET_ILIM_MODE(x) (((x) & 0x0F) << 0)
/* ADP5061_TERM_SET */
#define ADP5061_TERM_SET_VTRM_MSK GENMASK(7, 2)
#define ADP5061_TERM_SET_VTRM_MODE(x) (((x) & 0x3F) << 2)
#define ADP5061_TERM_SET_CHG_VLIM_MSK GENMASK(1, 0)
#define ADP5061_TERM_SET_CHG_VLIM_MODE(x) (((x) & 0x03) << 0)
/* ADP5061_CHG_CURR */
#define ADP5061_CHG_CURR_ICHG_MSK GENMASK(6, 2)
#define ADP5061_CHG_CURR_ICHG_MODE(x) (((x) & 0x1F) << 2)
#define ADP5061_CHG_CURR_ITRK_DEAD_MSK GENMASK(1, 0)
#define ADP5061_CHG_CURR_ITRK_DEAD_MODE(x) (((x) & 0x03) << 0)
/* ADP5061_VOLTAGE_TH */
#define ADP5061_VOLTAGE_TH_DIS_RCH_MSK BIT(7)
#define ADP5061_VOLTAGE_TH_DIS_RCH_MODE(x) (((x) & 0x01) << 7)
#define ADP5061_VOLTAGE_TH_VRCH_MSK GENMASK(6, 5)
#define ADP5061_VOLTAGE_TH_VRCH_MODE(x) (((x) & 0x03) << 5)
#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK GENMASK(4, 3)
#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(x) (((x) & 0x03) << 3)
#define ADP5061_VOLTAGE_TH_VWEAK_MSK GENMASK(2, 0)
#define ADP5061_VOLTAGE_TH_VWEAK_MODE(x) (((x) & 0x07) << 0)
/* ADP5061_CHG_STATUS_1 */
#define ADP5061_CHG_STATUS_1_VIN_OV(x) (((x) >> 7) & 0x1)
#define ADP5061_CHG_STATUS_1_VIN_OK(x) (((x) >> 6) & 0x1)
#define ADP5061_CHG_STATUS_1_VIN_ILIM(x) (((x) >> 5) & 0x1)
#define ADP5061_CHG_STATUS_1_THERM_LIM(x) (((x) >> 4) & 0x1)
#define ADP5061_CHG_STATUS_1_CHDONE(x) (((x) >> 3) & 0x1)
#define ADP5061_CHG_STATUS_1_CHG_STATUS(x) (((x) >> 0) & 0x7)
/* ADP5061_CHG_STATUS_2 */
#define ADP5061_CHG_STATUS_2_THR_STATUS(x) (((x) >> 5) & 0x7)
#define ADP5061_CHG_STATUS_2_RCH_LIM_INFO(x) (((x) >> 3) & 0x1)
#define ADP5061_CHG_STATUS_2_BAT_STATUS(x) (((x) >> 0) & 0x7)
/* ADP5061_IEND */
#define ADP5061_IEND_IEND_MSK GENMASK(7, 5)
#define ADP5061_IEND_IEND_MODE(x) (((x) & 0x07) << 5)
#define ADP5061_NO_BATTERY 0x01
#define ADP5061_ICHG_MAX 1300 // mA
enum adp5061_chg_status {
ADP5061_CHG_OFF,
ADP5061_CHG_TRICKLE,
ADP5061_CHG_FAST_CC,
ADP5061_CHG_FAST_CV,
ADP5061_CHG_COMPLETE,
ADP5061_CHG_LDO_MODE,
ADP5061_CHG_TIMER_EXP,
ADP5061_CHG_BAT_DET,
};
static const int adp5061_chg_type[4] = {
[ADP5061_CHG_OFF] = POWER_SUPPLY_CHARGE_TYPE_NONE,
[ADP5061_CHG_TRICKLE] = POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
[ADP5061_CHG_FAST_CC] = POWER_SUPPLY_CHARGE_TYPE_FAST,
[ADP5061_CHG_FAST_CV] = POWER_SUPPLY_CHARGE_TYPE_FAST,
};
static const int adp5061_vweak_th[8] = {
2700, 2800, 2900, 3000, 3100, 3200, 3300, 3400,
};
static const int adp5061_prechg_current[4] = {
5, 10, 20, 80,
};
static const int adp5061_vmin[4] = {
2000, 2500, 2600, 2900,
};
static const int adp5061_const_chg_vmax[4] = {
3200, 3400, 3700, 3800,
};
static const int adp5061_const_ichg[24] = {
50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650,
700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1200, 1300,
};
static const int adp5061_vmax[36] = {
3800, 3820, 3840, 3860, 3880, 3900, 3920, 3940, 3960, 3980,
4000, 4020, 4040, 4060, 4080, 4100, 4120, 4140, 4160, 4180,
4200, 4220, 4240, 4260, 4280, 4300, 4320, 4340, 4360, 4380,
4400, 4420, 4440, 4460, 4480, 4500,
};
static const int adp5061_in_current_lim[16] = {
100, 150, 200, 250, 300, 400, 500, 600, 700,
800, 900, 1000, 1200, 1500, 1800, 2100,
};
static const int adp5061_iend[8] = {
12500, 32500, 52500, 72500, 92500, 117500, 142500, 170000,
};
struct adp5061_state {
struct i2c_client *client;
struct regmap *regmap;
struct power_supply *psy;
};
static int adp5061_get_array_index(const int *array, u8 size, int val)
{
int i;
for (i = 1; i < size; i++) {
if (val < array[i])
break;
}
return i-1;
}
static int adp5061_get_status(struct adp5061_state *st,
u8 *status1, u8 *status2)
{
u8 buf[2];
int ret;
/* CHG_STATUS1 and CHG_STATUS2 are adjacent regs */
ret = regmap_bulk_read(st->regmap, ADP5061_CHG_STATUS_1,
&buf[0], 2);
if (ret < 0)
return ret;
*status1 = buf[0];
*status2 = buf[1];
return ret;
}
static int adp5061_get_input_current_limit(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int mode, ret;
ret = regmap_read(st->regmap, ADP5061_VINX_SET, &regval);
if (ret < 0)
return ret;
mode = ADP5061_VINX_SET_ILIM_MODE(regval);
val->intval = adp5061_in_current_lim[mode] * 1000;
return ret;
}
static int adp5061_set_input_current_limit(struct adp5061_state *st, int val)
{
int index;
/* Convert from uA to mA */
val /= 1000;
index = adp5061_get_array_index(adp5061_in_current_lim,
ARRAY_SIZE(adp5061_in_current_lim),
val);
if (index < 0)
return index;
return regmap_update_bits(st->regmap, ADP5061_VINX_SET,
ADP5061_VINX_SET_ILIM_MSK,
ADP5061_VINX_SET_ILIM_MODE(index));
}
static int adp5061_set_min_voltage(struct adp5061_state *st, int val)
{
int index;
/* Convert from uV to mV */
val /= 1000;
index = adp5061_get_array_index(adp5061_vmin,
ARRAY_SIZE(adp5061_vmin),
val);
if (index < 0)
return index;
return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK,
ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(index));
}
static int adp5061_get_min_voltage(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int ret;
ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
if (ret < 0)
return ret;
regval = ((regval & ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK) >> 3);
val->intval = adp5061_vmin[regval] * 1000;
return ret;
}
static int adp5061_get_chg_volt_lim(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int mode, ret;
ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
if (ret < 0)
return ret;
mode = ADP5061_TERM_SET_CHG_VLIM_MODE(regval);
val->intval = adp5061_const_chg_vmax[mode] * 1000;
return ret;
}
static int adp5061_get_max_voltage(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int ret;
ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
if (ret < 0)
return ret;
regval = ((regval & ADP5061_TERM_SET_VTRM_MSK) >> 2) - 0x0F;
if (regval >= ARRAY_SIZE(adp5061_vmax))
regval = ARRAY_SIZE(adp5061_vmax) - 1;
val->intval = adp5061_vmax[regval] * 1000;
return ret;
}
static int adp5061_set_max_voltage(struct adp5061_state *st, int val)
{
int vmax_index;
/* Convert from uV to mV */
val /= 1000;
if (val > 4500)
val = 4500;
vmax_index = adp5061_get_array_index(adp5061_vmax,
ARRAY_SIZE(adp5061_vmax), val);
if (vmax_index < 0)
return vmax_index;
vmax_index += 0x0F;
return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
ADP5061_TERM_SET_VTRM_MSK,
ADP5061_TERM_SET_VTRM_MODE(vmax_index));
}
static int adp5061_set_const_chg_vmax(struct adp5061_state *st, int val)
{
int index;
/* Convert from uV to mV */
val /= 1000;
index = adp5061_get_array_index(adp5061_const_chg_vmax,
ARRAY_SIZE(adp5061_const_chg_vmax),
val);
if (index < 0)
return index;
return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
ADP5061_TERM_SET_CHG_VLIM_MSK,
ADP5061_TERM_SET_CHG_VLIM_MODE(index));
}
static int adp5061_set_const_chg_current(struct adp5061_state *st, int val)
{
int index;
/* Convert from uA to mA */
val /= 1000;
if (val > ADP5061_ICHG_MAX)
val = ADP5061_ICHG_MAX;
index = adp5061_get_array_index(adp5061_const_ichg,
ARRAY_SIZE(adp5061_const_ichg),
val);
if (index < 0)
return index;
return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
ADP5061_CHG_CURR_ICHG_MSK,
ADP5061_CHG_CURR_ICHG_MODE(index));
}
static int adp5061_get_const_chg_current(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int ret;
ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
if (ret < 0)
return ret;
regval = ((regval & ADP5061_CHG_CURR_ICHG_MSK) >> 2);
if (regval >= ARRAY_SIZE(adp5061_const_ichg))
regval = ARRAY_SIZE(adp5061_const_ichg) - 1;
val->intval = adp5061_const_ichg[regval] * 1000;
return ret;
}
static int adp5061_get_prechg_current(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int ret;
ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
if (ret < 0)
return ret;
regval &= ADP5061_CHG_CURR_ITRK_DEAD_MSK;
val->intval = adp5061_prechg_current[regval] * 1000;
return ret;
}
static int adp5061_set_prechg_current(struct adp5061_state *st, int val)
{
int index;
/* Convert from uA to mA */
val /= 1000;
index = adp5061_get_array_index(adp5061_prechg_current,
ARRAY_SIZE(adp5061_prechg_current),
val);
if (index < 0)
return index;
return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
ADP5061_CHG_CURR_ITRK_DEAD_MSK,
ADP5061_CHG_CURR_ITRK_DEAD_MODE(index));
}
static int adp5061_get_vweak_th(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int ret;
ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
if (ret < 0)
return ret;
regval &= ADP5061_VOLTAGE_TH_VWEAK_MSK;
val->intval = adp5061_vweak_th[regval] * 1000;
return ret;
}
static int adp5061_set_vweak_th(struct adp5061_state *st, int val)
{
int index;
/* Convert from uV to mV */
val /= 1000;
index = adp5061_get_array_index(adp5061_vweak_th,
ARRAY_SIZE(adp5061_vweak_th),
val);
if (index < 0)
return index;
return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
ADP5061_VOLTAGE_TH_VWEAK_MSK,
ADP5061_VOLTAGE_TH_VWEAK_MODE(index));
}
static int adp5061_get_chg_type(struct adp5061_state *st,
union power_supply_propval *val)
{
u8 status1, status2;
int chg_type, ret;
ret = adp5061_get_status(st, &status1, &status2);
if (ret < 0)
return ret;
chg_type = adp5061_chg_type[ADP5061_CHG_STATUS_1_CHG_STATUS(status1)];
if (chg_type > ADP5061_CHG_FAST_CV)
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
else
val->intval = chg_type;
return ret;
}
static int adp5061_get_charger_status(struct adp5061_state *st,
union power_supply_propval *val)
{
u8 status1, status2;
int ret;
ret = adp5061_get_status(st, &status1, &status2);
if (ret < 0)
return ret;
switch (ADP5061_CHG_STATUS_1_CHG_STATUS(status1)) {
case ADP5061_CHG_OFF:
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
break;
case ADP5061_CHG_TRICKLE:
case ADP5061_CHG_FAST_CC:
case ADP5061_CHG_FAST_CV:
val->intval = POWER_SUPPLY_STATUS_CHARGING;
break;
case ADP5061_CHG_COMPLETE:
val->intval = POWER_SUPPLY_STATUS_FULL;
break;
case ADP5061_CHG_TIMER_EXP:
/* The battery must be discharging if there is a charge fault */
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break;
default:
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
}
return ret;
}
static int adp5061_get_battery_status(struct adp5061_state *st,
union power_supply_propval *val)
{
u8 status1, status2;
int ret;
ret = adp5061_get_status(st, &status1, &status2);
if (ret < 0)
return ret;
switch (ADP5061_CHG_STATUS_2_BAT_STATUS(status2)) {
case 0x0: /* Battery monitor off */
case 0x1: /* No battery */
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
break;
case 0x2: /* VBAT < VTRK */
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
break;
case 0x3: /* VTRK < VBAT_SNS < VWEAK */
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
break;
case 0x4: /* VBAT_SNS > VWEAK */
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
break;
}
return ret;
}
static int adp5061_get_termination_current(struct adp5061_state *st,
union power_supply_propval *val)
{
unsigned int regval;
int ret;
ret = regmap_read(st->regmap, ADP5061_IEND, &regval);
if (ret < 0)
return ret;
regval = (regval & ADP5061_IEND_IEND_MSK) >> 5;
val->intval = adp5061_iend[regval];
return ret;
}
static int adp5061_set_termination_current(struct adp5061_state *st, int val)
{
int index;
index = adp5061_get_array_index(adp5061_iend,
ARRAY_SIZE(adp5061_iend),
val);
if (index < 0)
return index;
return regmap_update_bits(st->regmap, ADP5061_IEND,
ADP5061_IEND_IEND_MSK,
ADP5061_IEND_IEND_MODE(index));
}
static int adp5061_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct adp5061_state *st = power_supply_get_drvdata(psy);
u8 status1, status2;
int mode, ret;
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
ret = adp5061_get_status(st, &status1, &status2);
if (ret < 0)
return ret;
mode = ADP5061_CHG_STATUS_2_BAT_STATUS(status2);
if (mode == ADP5061_NO_BATTERY)
val->intval = 0;
else
val->intval = 1;
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
return adp5061_get_chg_type(st, val);
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
/* This property is used to indicate the input current
* limit into VINx (ILIM)
*/
return adp5061_get_input_current_limit(st, val);
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
/* This property is used to indicate the termination
* voltage (VTRM)
*/
return adp5061_get_max_voltage(st, val);
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
/*
* This property is used to indicate the trickle to fast
* charge threshold (VTRK_DEAD)
*/
return adp5061_get_min_voltage(st, val);
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
/* This property is used to indicate the charging
* voltage limit (CHG_VLIM)
*/
return adp5061_get_chg_volt_lim(st, val);
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
/*
* This property is used to indicate the value of the constant
* current charge (ICHG)
*/
return adp5061_get_const_chg_current(st, val);
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
/*
* This property is used to indicate the value of the trickle
* and weak charge currents (ITRK_DEAD)
*/
return adp5061_get_prechg_current(st, val);
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
/*
* This property is used to set the VWEAK threshold
* bellow this value, weak charge mode is entered
* above this value, fast chargerge mode is entered
*/
return adp5061_get_vweak_th(st, val);
case POWER_SUPPLY_PROP_STATUS:
/*
* Indicate the charger status in relation to power
* supply status property
*/
return adp5061_get_charger_status(st, val);
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
/*
* Indicate the battery status in relation to power
* supply capacity level property
*/
return adp5061_get_battery_status(st, val);
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
/* Indicate the values of the termination current */
return adp5061_get_termination_current(st, val);
default:
return -EINVAL;
}
return 0;
}
static int adp5061_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct adp5061_state *st = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
return adp5061_set_input_current_limit(st, val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
return adp5061_set_max_voltage(st, val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
return adp5061_set_min_voltage(st, val->intval);
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
return adp5061_set_const_chg_vmax(st, val->intval);
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
return adp5061_set_const_chg_current(st, val->intval);
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
return adp5061_set_prechg_current(st, val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
return adp5061_set_vweak_th(st, val->intval);
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
return adp5061_set_termination_current(st, val->intval);
default:
return -EINVAL;
}
return 0;
}
static int adp5061_prop_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
switch (psp) {
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
case POWER_SUPPLY_PROP_VOLTAGE_MAX:
case POWER_SUPPLY_PROP_VOLTAGE_MIN:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
return 1;
default:
return 0;
}
}
static enum power_supply_property adp5061_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_VOLTAGE_MAX,
POWER_SUPPLY_PROP_VOLTAGE_MIN,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
POWER_SUPPLY_PROP_VOLTAGE_AVG,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
};
static const struct regmap_config adp5061_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static const struct power_supply_desc adp5061_desc = {
.name = "adp5061",
.type = POWER_SUPPLY_TYPE_USB,
.get_property = adp5061_get_property,
.set_property = adp5061_set_property,
.property_is_writeable = adp5061_prop_writeable,
.properties = adp5061_props,
.num_properties = ARRAY_SIZE(adp5061_props),
};
static int adp5061_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct power_supply_config psy_cfg = {};
struct adp5061_state *st;
st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL);
if (!st)
return -ENOMEM;
st->client = client;
st->regmap = devm_regmap_init_i2c(client,
&adp5061_regmap_config);
if (IS_ERR(st->regmap)) {
dev_err(&client->dev, "Failed to initialize register map\n");
return -EINVAL;
}
i2c_set_clientdata(client, st);
psy_cfg.drv_data = st;
st->psy = devm_power_supply_register(&client->dev,
&adp5061_desc,
&psy_cfg);
if (IS_ERR(st->psy)) {
dev_err(&client->dev, "Failed to register power supply\n");
return PTR_ERR(st->psy);
}
return 0;
}
static const struct i2c_device_id adp5061_id[] = {
{ "adp5061", 0},
{ }
};
MODULE_DEVICE_TABLE(i2c, adp5061_id);
static struct i2c_driver adp5061_driver = {
.driver = {
.name = KBUILD_MODNAME,
},
.probe = adp5061_probe,
.id_table = adp5061_id,
};
module_i2c_driver(adp5061_driver);
MODULE_DESCRIPTION("Analog Devices adp5061 battery charger driver");
MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
MODULE_LICENSE("GPL v2");

View File

@ -222,6 +222,7 @@ static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
case 100000:
if (power->axp20x_id == AXP221_ID)
return -EINVAL;
/* fall through */
case 500000:
case 900000:
val = (900000 - intval) / 400000;

View File

@ -718,7 +718,7 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info)
}
/* Determine charge current limit */
cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
info->cc = cc;

View File

@ -26,7 +26,6 @@
* http://www.ti.com/product/bq27510-g1
* http://www.ti.com/product/bq27510-g2
* http://www.ti.com/product/bq27510-g3
* http://www.ti.com/product/bq27520-g4
* http://www.ti.com/product/bq27520-g1
* http://www.ti.com/product/bq27520-g2
* http://www.ti.com/product/bq27520-g3
@ -40,7 +39,9 @@
* http://www.ti.com/product/bq27545-g1
* http://www.ti.com/product/bq27421-g1
* http://www.ti.com/product/bq27425-g1
* http://www.ti.com/product/bq27426
* http://www.ti.com/product/bq27411-g1
* http://www.ti.com/product/bq27441-g1
* http://www.ti.com/product/bq27621-g1
*/

View File

@ -0,0 +1,545 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Power supply driver for ChromeOS EC based USB PD Charger.
*
* Copyright (c) 2014 - 2018 Google, Inc
*/
#include <linux/module.h>
#include <linux/mfd/cros_ec.h>
#include <linux/mfd/cros_ec_commands.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
#define CHARGER_DIR_NAME "CROS_USBPD_CHARGER%d"
#define CHARGER_DIR_NAME_LENGTH sizeof(CHARGER_DIR_NAME)
#define CHARGER_CACHE_UPDATE_DELAY msecs_to_jiffies(500)
#define CHARGER_MANUFACTURER_MODEL_LENGTH 32
#define DRV_NAME "cros-usbpd-charger"
struct port_data {
int port_number;
char name[CHARGER_DIR_NAME_LENGTH];
char manufacturer[CHARGER_MANUFACTURER_MODEL_LENGTH];
char model_name[CHARGER_MANUFACTURER_MODEL_LENGTH];
struct power_supply *psy;
struct power_supply_desc psy_desc;
int psy_usb_type;
int psy_online;
int psy_status;
int psy_current_max;
int psy_voltage_max_design;
int psy_voltage_now;
int psy_power_max;
struct charger_data *charger;
unsigned long last_update;
};
struct charger_data {
struct device *dev;
struct cros_ec_dev *ec_dev;
struct cros_ec_device *ec_device;
int num_charger_ports;
int num_registered_psy;
struct port_data *ports[EC_USB_PD_MAX_PORTS];
struct notifier_block notifier;
};
static enum power_supply_property cros_usbpd_charger_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CURRENT_MAX,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_USB_TYPE
};
static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = {
POWER_SUPPLY_USB_TYPE_UNKNOWN,
POWER_SUPPLY_USB_TYPE_SDP,
POWER_SUPPLY_USB_TYPE_DCP,
POWER_SUPPLY_USB_TYPE_CDP,
POWER_SUPPLY_USB_TYPE_C,
POWER_SUPPLY_USB_TYPE_PD,
POWER_SUPPLY_USB_TYPE_PD_DRP,
POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID
};
static int cros_usbpd_charger_ec_command(struct charger_data *charger,
unsigned int version,
unsigned int command,
void *outdata,
unsigned int outsize,
void *indata,
unsigned int insize)
{
struct cros_ec_dev *ec_dev = charger->ec_dev;
struct cros_ec_command *msg;
int ret;
msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
if (!msg)
return -ENOMEM;
msg->version = version;
msg->command = ec_dev->cmd_offset + command;
msg->outsize = outsize;
msg->insize = insize;
if (outsize)
memcpy(msg->data, outdata, outsize);
ret = cros_ec_cmd_xfer_status(charger->ec_device, msg);
if (ret >= 0 && insize)
memcpy(indata, msg->data, insize);
kfree(msg);
return ret;
}
static int cros_usbpd_charger_get_num_ports(struct charger_data *charger)
{
struct ec_response_usb_pd_ports resp;
int ret;
ret = cros_usbpd_charger_ec_command(charger, 0, EC_CMD_USB_PD_PORTS,
NULL, 0, &resp, sizeof(resp));
if (ret < 0) {
dev_err(charger->dev,
"Unable to get the number or ports (err:0x%x)\n", ret);
return ret;
}
return resp.num_ports;
}
static int cros_usbpd_charger_get_discovery_info(struct port_data *port)
{
struct charger_data *charger = port->charger;
struct ec_params_usb_pd_discovery_entry resp;
struct ec_params_usb_pd_info_request req;
int ret;
req.port = port->port_number;
ret = cros_usbpd_charger_ec_command(charger, 0,
EC_CMD_USB_PD_DISCOVERY,
&req, sizeof(req),
&resp, sizeof(resp));
if (ret < 0) {
dev_err(charger->dev,
"Unable to query discovery info (err:0x%x)\n", ret);
return ret;
}
dev_dbg(charger->dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n",
port->port_number, resp.vid, resp.pid, resp.ptype);
snprintf(port->manufacturer, sizeof(port->manufacturer), "%x",
resp.vid);
snprintf(port->model_name, sizeof(port->model_name), "%x", resp.pid);
return 0;
}
static int cros_usbpd_charger_get_power_info(struct port_data *port)
{
struct charger_data *charger = port->charger;
struct ec_response_usb_pd_power_info resp;
struct ec_params_usb_pd_power_info req;
int last_psy_status, last_psy_usb_type;
struct device *dev = charger->dev;
int ret;
req.port = port->port_number;
ret = cros_usbpd_charger_ec_command(charger, 0,
EC_CMD_USB_PD_POWER_INFO,
&req, sizeof(req),
&resp, sizeof(resp));
if (ret < 0) {
dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret);
return ret;
}
last_psy_status = port->psy_status;
last_psy_usb_type = port->psy_usb_type;
switch (resp.role) {
case USB_PD_PORT_POWER_DISCONNECTED:
port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
port->psy_online = 0;
break;
case USB_PD_PORT_POWER_SOURCE:
port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
port->psy_online = 0;
break;
case USB_PD_PORT_POWER_SINK:
port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
port->psy_online = 1;
break;
case USB_PD_PORT_POWER_SINK_NOT_CHARGING:
port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
port->psy_online = 1;
break;
default:
dev_err(dev, "Unknown role %d\n", resp.role);
break;
}
port->psy_voltage_max_design = resp.meas.voltage_max;
port->psy_voltage_now = resp.meas.voltage_now;
port->psy_current_max = resp.meas.current_max;
port->psy_power_max = resp.max_power;
switch (resp.type) {
case USB_CHG_TYPE_BC12_SDP:
case USB_CHG_TYPE_VBUS:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
break;
case USB_CHG_TYPE_NONE:
/*
* For dual-role devices when we are a source, the firmware
* reports the type as NONE. Report such chargers as type
* USB_PD_DRP.
*/
if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole)
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
else
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
break;
case USB_CHG_TYPE_OTHER:
case USB_CHG_TYPE_PROPRIETARY:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID;
break;
case USB_CHG_TYPE_C:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_C;
break;
case USB_CHG_TYPE_BC12_DCP:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
break;
case USB_CHG_TYPE_BC12_CDP:
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
break;
case USB_CHG_TYPE_PD:
if (resp.dualrole)
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
else
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD;
break;
case USB_CHG_TYPE_UNKNOWN:
/*
* While the EC is trying to determine the type of charger that
* has been plugged in, it will report the charger type as
* unknown. Additionally since the power capabilities are
* unknown, report the max current and voltage as zero.
*/
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
port->psy_voltage_max_design = 0;
port->psy_current_max = 0;
break;
default:
dev_err(dev, "Port %d: default case!\n", port->port_number);
port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
}
port->psy_desc.type = POWER_SUPPLY_TYPE_USB;
dev_dbg(dev,
"Port %d: type=%d vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n",
port->port_number, resp.type, resp.meas.voltage_max,
resp.meas.voltage_now, resp.meas.current_max,
resp.meas.current_lim, resp.max_power);
/*
* If power supply type or status changed, explicitly call
* power_supply_changed. This results in udev event getting generated
* and allows user mode apps to react quicker instead of waiting for
* their next poll of power supply status.
*/
if (last_psy_usb_type != port->psy_usb_type ||
last_psy_status != port->psy_status)
power_supply_changed(port->psy);
return 0;
}
static int cros_usbpd_charger_get_port_status(struct port_data *port,
bool ratelimit)
{
int ret;
if (ratelimit &&
time_is_after_jiffies(port->last_update +
CHARGER_CACHE_UPDATE_DELAY))
return 0;
ret = cros_usbpd_charger_get_power_info(port);
if (ret < 0)
return ret;
ret = cros_usbpd_charger_get_discovery_info(port);
port->last_update = jiffies;
return ret;
}
static void cros_usbpd_charger_power_changed(struct power_supply *psy)
{
struct port_data *port = power_supply_get_drvdata(psy);
struct charger_data *charger = port->charger;
int i;
for (i = 0; i < charger->num_registered_psy; i++)
cros_usbpd_charger_get_port_status(charger->ports[i], false);
}
static int cros_usbpd_charger_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct port_data *port = power_supply_get_drvdata(psy);
struct charger_data *charger = port->charger;
struct cros_ec_device *ec_device = charger->ec_device;
struct device *dev = charger->dev;
int ret;
/* Only refresh ec_port_status for dynamic properties */
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
/*
* If mkbp_event_supported, then we can be assured that
* the driver's state for the online property is consistent
* with the hardware. However, if we aren't event driven,
* the optimization before to skip an ec_port_status get
* and only returned cached values of the online property will
* cause a delay in detecting a cable attach until one of the
* other properties are read.
*
* Allow an ec_port_status refresh for online property check
* if we're not already online to check for plug events if
* not mkbp_event_supported.
*/
if (ec_device->mkbp_event_supported || port->psy_online)
break;
/* fall through */
case POWER_SUPPLY_PROP_CURRENT_MAX:
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = cros_usbpd_charger_get_port_status(port, true);
if (ret < 0) {
dev_err(dev, "Failed to get port status (err:0x%x)\n",
ret);
return -EINVAL;
}
break;
default:
break;
}
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = port->psy_online;
break;
case POWER_SUPPLY_PROP_STATUS:
val->intval = port->psy_status;
break;
case POWER_SUPPLY_PROP_CURRENT_MAX:
val->intval = port->psy_current_max * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
val->intval = port->psy_voltage_max_design * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = port->psy_voltage_now * 1000;
break;
case POWER_SUPPLY_PROP_USB_TYPE:
val->intval = port->psy_usb_type;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = port->model_name;
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
val->strval = port->manufacturer;
break;
default:
return -EINVAL;
}
return 0;
}
static int cros_usbpd_charger_ec_event(struct notifier_block *nb,
unsigned long queued_during_suspend,
void *_notify)
{
struct cros_ec_device *ec_device;
struct charger_data *charger;
struct device *dev;
u32 host_event;
charger = container_of(nb, struct charger_data, notifier);
ec_device = charger->ec_device;
dev = charger->dev;
host_event = cros_ec_get_host_event(ec_device);
if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
cros_usbpd_charger_power_changed(charger->ports[0]->psy);
return NOTIFY_OK;
} else {
return NOTIFY_DONE;
}
}
static void cros_usbpd_charger_unregister_notifier(void *data)
{
struct charger_data *charger = data;
struct cros_ec_device *ec_device = charger->ec_device;
blocking_notifier_chain_unregister(&ec_device->event_notifier,
&charger->notifier);
}
static int cros_usbpd_charger_probe(struct platform_device *pd)
{
struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
struct cros_ec_device *ec_device = ec_dev->ec_dev;
struct power_supply_desc *psy_desc;
struct device *dev = &pd->dev;
struct charger_data *charger;
struct power_supply *psy;
struct port_data *port;
int ret = -EINVAL;
int i;
charger = devm_kzalloc(dev, sizeof(struct charger_data),
GFP_KERNEL);
if (!charger)
return -ENOMEM;
charger->dev = dev;
charger->ec_dev = ec_dev;
charger->ec_device = ec_device;
platform_set_drvdata(pd, charger);
charger->num_charger_ports = cros_usbpd_charger_get_num_ports(charger);
if (charger->num_charger_ports <= 0) {
/*
* This can happen on a system that doesn't support USB PD.
* Log a message, but no need to warn.
*/
dev_info(dev, "No charging ports found\n");
ret = -ENODEV;
goto fail_nowarn;
}
for (i = 0; i < charger->num_charger_ports; i++) {
struct power_supply_config psy_cfg = {};
port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL);
if (!port) {
ret = -ENOMEM;
goto fail;
}
port->charger = charger;
port->port_number = i;
sprintf(port->name, CHARGER_DIR_NAME, i);
psy_desc = &port->psy_desc;
psy_desc->name = port->name;
psy_desc->type = POWER_SUPPLY_TYPE_USB;
psy_desc->get_property = cros_usbpd_charger_get_prop;
psy_desc->external_power_changed =
cros_usbpd_charger_power_changed;
psy_desc->properties = cros_usbpd_charger_props;
psy_desc->num_properties =
ARRAY_SIZE(cros_usbpd_charger_props);
psy_desc->usb_types = cros_usbpd_charger_usb_types;
psy_desc->num_usb_types =
ARRAY_SIZE(cros_usbpd_charger_usb_types);
psy_cfg.drv_data = port;
psy = devm_power_supply_register_no_ws(dev, psy_desc,
&psy_cfg);
if (IS_ERR(psy)) {
dev_err(dev, "Failed to register power supply\n");
continue;
}
port->psy = psy;
charger->ports[charger->num_registered_psy++] = port;
}
if (!charger->num_registered_psy) {
ret = -ENODEV;
dev_err(dev, "No power supplies registered\n");
goto fail;
}
if (ec_device->mkbp_event_supported) {
/* Get PD events from the EC */
charger->notifier.notifier_call = cros_usbpd_charger_ec_event;
ret = blocking_notifier_chain_register(
&ec_device->event_notifier,
&charger->notifier);
if (ret < 0) {
dev_warn(dev, "failed to register notifier\n");
} else {
ret = devm_add_action_or_reset(dev,
cros_usbpd_charger_unregister_notifier,
charger);
if (ret < 0)
goto fail;
}
}
return 0;
fail:
WARN(1, "%s: Failing probe (err:0x%x)\n", dev_name(dev), ret);
fail_nowarn:
dev_info(dev, "Failing probe (err:0x%x)\n", ret);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int cros_usbpd_charger_resume(struct device *dev)
{
struct charger_data *charger = dev_get_drvdata(dev);
int i;
if (!charger)
return 0;
for (i = 0; i < charger->num_registered_psy; i++) {
power_supply_changed(charger->ports[i]->psy);
charger->ports[i]->last_update =
jiffies - CHARGER_CACHE_UPDATE_DELAY;
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(cros_usbpd_charger_pm_ops, NULL,
cros_usbpd_charger_resume);
static struct platform_driver cros_usbpd_charger_driver = {
.driver = {
.name = DRV_NAME,
.pm = &cros_usbpd_charger_pm_ops,
},
.probe = cros_usbpd_charger_probe
};
module_platform_driver(cros_usbpd_charger_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ChromeOS EC USBPD charger");
MODULE_ALIAS("platform:" DRV_NAME);

View File

@ -27,9 +27,64 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/suspend.h>
#include <linux/w1.h>
#include "../../w1/slaves/w1_ds2760.h"
#include <linux/of.h>
static unsigned int cache_time = 1000;
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
static bool pmod_enabled;
module_param(pmod_enabled, bool, 0644);
MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
static unsigned int rated_capacity;
module_param(rated_capacity, uint, 0644);
MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
static unsigned int current_accum;
module_param(current_accum, uint, 0644);
MODULE_PARM_DESC(current_accum, "current accumulator value");
#define W1_FAMILY_DS2760 0x30
/* Known commands to the DS2760 chip */
#define W1_DS2760_SWAP 0xAA
#define W1_DS2760_READ_DATA 0x69
#define W1_DS2760_WRITE_DATA 0x6C
#define W1_DS2760_COPY_DATA 0x48
#define W1_DS2760_RECALL_DATA 0xB8
#define W1_DS2760_LOCK 0x6A
/* Number of valid register addresses */
#define DS2760_DATA_SIZE 0x40
#define DS2760_PROTECTION_REG 0x00
#define DS2760_STATUS_REG 0x01
#define DS2760_STATUS_IE (1 << 2)
#define DS2760_STATUS_SWEN (1 << 3)
#define DS2760_STATUS_RNAOP (1 << 4)
#define DS2760_STATUS_PMOD (1 << 5)
#define DS2760_EEPROM_REG 0x07
#define DS2760_SPECIAL_FEATURE_REG 0x08
#define DS2760_VOLTAGE_MSB 0x0c
#define DS2760_VOLTAGE_LSB 0x0d
#define DS2760_CURRENT_MSB 0x0e
#define DS2760_CURRENT_LSB 0x0f
#define DS2760_CURRENT_ACCUM_MSB 0x10
#define DS2760_CURRENT_ACCUM_LSB 0x11
#define DS2760_TEMP_MSB 0x18
#define DS2760_TEMP_LSB 0x19
#define DS2760_EEPROM_BLOCK0 0x20
#define DS2760_ACTIVE_FULL 0x20
#define DS2760_EEPROM_BLOCK1 0x30
#define DS2760_STATUS_WRITE_REG 0x31
#define DS2760_RATED_CAPACITY 0x32
#define DS2760_CURRENT_OFFSET_BIAS 0x33
#define DS2760_ACTIVE_EMPTY 0x3b
struct ds2760_device_info {
struct device *dev;
@ -55,28 +110,113 @@ struct ds2760_device_info {
int full_counter;
struct power_supply *bat;
struct power_supply_desc bat_desc;
struct device *w1_dev;
struct workqueue_struct *monitor_wqueue;
struct delayed_work monitor_work;
struct delayed_work set_charged_work;
struct notifier_block pm_notifier;
};
static unsigned int cache_time = 1000;
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
int io)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
static bool pmod_enabled;
module_param(pmod_enabled, bool, 0644);
MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
if (!dev)
return 0;
static unsigned int rated_capacity;
module_param(rated_capacity, uint, 0644);
MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
mutex_lock(&sl->master->bus_mutex);
static unsigned int current_accum;
module_param(current_accum, uint, 0644);
MODULE_PARM_DESC(current_accum, "current accumulator value");
if (addr > DS2760_DATA_SIZE || addr < 0) {
count = 0;
goto out;
}
if (addr + count > DS2760_DATA_SIZE)
count = DS2760_DATA_SIZE - addr;
if (!w1_reset_select_slave(sl)) {
if (!io) {
w1_write_8(sl->master, W1_DS2760_READ_DATA);
w1_write_8(sl->master, addr);
count = w1_read_block(sl->master, buf, count);
} else {
w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
w1_write_8(sl->master, addr);
w1_write_block(sl->master, buf, count);
/* XXX w1_write_block returns void, not n_written */
}
}
out:
mutex_unlock(&sl->master->bus_mutex);
return count;
}
static int w1_ds2760_read(struct device *dev,
char *buf, int addr,
size_t count)
{
return w1_ds2760_io(dev, buf, addr, count, 0);
}
static int w1_ds2760_write(struct device *dev,
char *buf,
int addr, size_t count)
{
return w1_ds2760_io(dev, buf, addr, count, 1);
}
static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
if (!dev)
return -EINVAL;
mutex_lock(&sl->master->bus_mutex);
if (w1_reset_select_slave(sl) == 0) {
w1_write_8(sl->master, cmd);
w1_write_8(sl->master, addr);
}
mutex_unlock(&sl->master->bus_mutex);
return 0;
}
static int w1_ds2760_store_eeprom(struct device *dev, int addr)
{
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
}
static int w1_ds2760_recall_eeprom(struct device *dev, int addr)
{
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
}
static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
return w1_ds2760_read(dev, buf, off, count);
}
static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
static struct bin_attribute *w1_ds2760_bin_attrs[] = {
&bin_attr_w1_slave,
NULL,
};
static const struct attribute_group w1_ds2760_group = {
.bin_attrs = w1_ds2760_bin_attrs,
};
static const struct attribute_group *w1_ds2760_groups[] = {
&w1_ds2760_group,
NULL,
};
/* Some batteries have their rated capacity stored a N * 10 mAh, while
* others use an index into this table. */
static int rated_capacities[] = {
@ -138,10 +278,10 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
count = DS2760_TEMP_LSB - start + 1;
}
ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count);
ret = w1_ds2760_read(di->dev, di->raw + start, start, count);
if (ret != count) {
dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
di->w1_dev);
di->dev);
return 1;
}
@ -242,7 +382,7 @@ static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
acr[0] = acr_val >> 8;
acr[1] = acr_val & 0xff;
if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
if (w1_ds2760_write(di->dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
dev_warn(di->dev, "ACR write failed\n");
}
@ -297,9 +437,9 @@ static void ds2760_battery_write_status(struct ds2760_device_info *di,
if (status == di->raw[DS2760_STATUS_REG])
return;
w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1);
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_write(di->dev, &status, DS2760_STATUS_WRITE_REG, 1);
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
}
static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
@ -308,9 +448,9 @@ static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
return;
w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_write(di->dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
}
static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
@ -325,9 +465,9 @@ static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
return;
w1_ds2760_write(di->w1_dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
w1_ds2760_write(di->dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
/* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
* values won't be read back by ds2760_battery_read_status() */
@ -383,9 +523,9 @@ static void ds2760_battery_set_charged_work(struct work_struct *work)
dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_write(di->dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
* value won't be read back by ds2760_battery_read_status() */
@ -504,24 +644,55 @@ static enum power_supply_property ds2760_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY,
};
static int ds2760_battery_probe(struct platform_device *pdev)
static int ds2760_pm_notifier(struct notifier_block *notifier,
unsigned long pm_event,
void *unused)
{
struct ds2760_device_info *di =
container_of(notifier, struct ds2760_device_info, pm_notifier);
switch (pm_event) {
case PM_HIBERNATION_PREPARE:
case PM_SUSPEND_PREPARE:
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
break;
case PM_POST_RESTORE:
case PM_POST_HIBERNATION:
case PM_POST_SUSPEND:
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
power_supply_changed(di->bat);
mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
break;
case PM_RESTORE_PREPARE:
default:
break;
}
return NOTIFY_DONE;
}
static int w1_ds2760_add_slave(struct w1_slave *sl)
{
struct power_supply_config psy_cfg = {};
char status;
int retval = 0;
struct ds2760_device_info *di;
struct device *dev = &sl->dev;
int retval = 0;
char name[32];
char status;
di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
if (!di) {
retval = -ENOMEM;
goto di_alloc_failed;
}
platform_set_drvdata(pdev, di);
snprintf(name, sizeof(name), "ds2760-battery.%d", dev->id);
di->dev = &pdev->dev;
di->w1_dev = pdev->dev.parent;
di->bat_desc.name = dev_name(&pdev->dev);
di->dev = dev;
di->bat_desc.name = name;
di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
di->bat_desc.properties = ds2760_battery_props;
di->bat_desc.num_properties = ARRAY_SIZE(ds2760_battery_props);
@ -533,10 +704,30 @@ static int ds2760_battery_probe(struct platform_device *pdev)
di->bat_desc.external_power_changed =
ds2760_battery_external_power_changed;
psy_cfg.drv_data = di;
psy_cfg.drv_data = di;
if (dev->of_node) {
u32 tmp;
psy_cfg.of_node = dev->of_node;
if (!of_property_read_bool(dev->of_node, "maxim,pmod-enabled"))
pmod_enabled = true;
if (!of_property_read_u32(dev->of_node,
"maxim,cache-time-ms", &tmp))
cache_time = tmp;
if (!of_property_read_u32(dev->of_node,
"rated-capacity-microamp-hours",
&tmp))
rated_capacity = tmp / 10; /* property is in mAh */
}
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
sl->family_data = di;
/* enable sleep mode feature */
ds2760_battery_read_status(di);
status = di->raw[DS2760_STATUS_REG];
@ -547,7 +738,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
ds2760_battery_write_status(di, status);
/* set rated capacity from module param */
/* set rated capacity from module param or device tree */
if (rated_capacity)
ds2760_battery_write_rated_capacity(di, rated_capacity);
@ -556,7 +747,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
if (current_accum)
ds2760_battery_set_current_accum(di, current_accum);
di->bat = power_supply_register(&pdev->dev, &di->bat_desc, &psy_cfg);
di->bat = power_supply_register(dev, &di->bat_desc, &psy_cfg);
if (IS_ERR(di->bat)) {
dev_err(di->dev, "failed to register battery\n");
retval = PTR_ERR(di->bat);
@ -566,14 +757,16 @@ static int ds2760_battery_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
INIT_DELAYED_WORK(&di->set_charged_work,
ds2760_battery_set_charged_work);
di->monitor_wqueue = alloc_ordered_workqueue(dev_name(&pdev->dev),
WQ_MEM_RECLAIM);
di->monitor_wqueue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
if (!di->monitor_wqueue) {
retval = -ESRCH;
goto workqueue_failed;
}
queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
di->pm_notifier.notifier_call = ds2760_pm_notifier;
register_pm_notifier(&di->pm_notifier);
goto success;
workqueue_failed:
@ -584,65 +777,40 @@ success:
return retval;
}
static int ds2760_battery_remove(struct platform_device *pdev)
static void w1_ds2760_remove_slave(struct w1_slave *sl)
{
struct ds2760_device_info *di = platform_get_drvdata(pdev);
struct ds2760_device_info *di = sl->family_data;
unregister_pm_notifier(&di->pm_notifier);
cancel_delayed_work_sync(&di->monitor_work);
cancel_delayed_work_sync(&di->set_charged_work);
destroy_workqueue(di->monitor_wqueue);
power_supply_unregister(di->bat);
return 0;
}
#ifdef CONFIG_PM
#ifdef CONFIG_OF
static const struct of_device_id w1_ds2760_of_ids[] = {
{ .compatible = "maxim,ds2760" },
{}
};
#endif
static int ds2760_battery_suspend(struct platform_device *pdev,
pm_message_t state)
{
struct ds2760_device_info *di = platform_get_drvdata(pdev);
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
return 0;
}
static int ds2760_battery_resume(struct platform_device *pdev)
{
struct ds2760_device_info *di = platform_get_drvdata(pdev);
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
power_supply_changed(di->bat);
mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
return 0;
}
#else
#define ds2760_battery_suspend NULL
#define ds2760_battery_resume NULL
#endif /* CONFIG_PM */
MODULE_ALIAS("platform:ds2760-battery");
static struct platform_driver ds2760_battery_driver = {
.driver = {
.name = "ds2760-battery",
},
.probe = ds2760_battery_probe,
.remove = ds2760_battery_remove,
.suspend = ds2760_battery_suspend,
.resume = ds2760_battery_resume,
static struct w1_family_ops w1_ds2760_fops = {
.add_slave = w1_ds2760_add_slave,
.remove_slave = w1_ds2760_remove_slave,
.groups = w1_ds2760_groups,
};
module_platform_driver(ds2760_battery_driver);
static struct w1_family w1_ds2760_family = {
.fid = W1_FAMILY_DS2760,
.fops = &w1_ds2760_fops,
.of_match_table = of_match_ptr(w1_ds2760_of_ids),
};
module_w1_family(w1_ds2760_family);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
"Matt Reimer <mreimer@vpop.net>, "
"Anton Vorontsov <cbou@mail.ru>");
MODULE_DESCRIPTION("ds2760 battery driver");
MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));

View File

@ -241,10 +241,10 @@ static int gab_probe(struct platform_device *pdev)
struct power_supply_desc *psy_desc;
struct power_supply_config psy_cfg = {};
struct gab_platform_data *pdata = pdev->dev.platform_data;
enum power_supply_property *properties;
int ret = 0;
int chan;
int index = 0;
int index = ARRAY_SIZE(gab_props);
bool any = false;
adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL);
if (!adc_bat) {
@ -278,8 +278,6 @@ static int gab_probe(struct platform_device *pdev)
}
memcpy(psy_desc->properties, gab_props, sizeof(gab_props));
properties = (enum power_supply_property *)
((char *)psy_desc->properties + sizeof(gab_props));
/*
* getting channel from iio and copying the battery properties
@ -293,15 +291,22 @@ static int gab_probe(struct platform_device *pdev)
adc_bat->channel[chan] = NULL;
} else {
/* copying properties for supported channels only */
memcpy(properties + sizeof(*(psy_desc->properties)) * index,
&gab_dyn_props[chan],
sizeof(gab_dyn_props[chan]));
index++;
int index2;
for (index2 = 0; index2 < index; index2++) {
if (psy_desc->properties[index2] ==
gab_dyn_props[chan])
break; /* already known */
}
if (index2 == index) /* really new */
psy_desc->properties[index++] =
gab_dyn_props[chan];
any = true;
}
}
/* none of the channels are supported so let's bail out */
if (index == 0) {
if (!any) {
ret = -ENODEV;
goto second_mem_fail;
}
@ -312,7 +317,7 @@ static int gab_probe(struct platform_device *pdev)
* as come channels may be not be supported by the device.So
* we need to take care of that.
*/
psy_desc->num_properties = ARRAY_SIZE(gab_props) + index;
psy_desc->num_properties = index;
adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
if (IS_ERR(adc_bat->psy)) {

View File

@ -39,7 +39,7 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
union power_supply_propval *val)
{
struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
int val2;
int ret, val2;
switch (psp) {
case POWER_SUPPLY_PROP_TECHNOLOGY:
@ -47,11 +47,18 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
/* battery voltage is iio channel * 2 + Vce of transistor */
iio_read_channel_processed(batt->iio_v, &val->intval);
ret = iio_read_channel_processed(batt->iio_v, &val->intval);
if (ret)
return ret;
val->intval *= 2000;
val->intval += 200000;
val->intval += 50000;
/* plus adjust for shunt resistor drop */
iio_read_channel_processed(batt->iio_i, &val2);
ret = iio_read_channel_processed(batt->iio_i, &val2);
if (ret)
return ret;
val2 *= 1000;
val2 /= 15;
val->intval += val2;
@ -64,7 +71,10 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
/* battery current is iio channel / 15 / 0.05 ohms */
iio_read_channel_processed(batt->iio_i, &val->intval);
ret = iio_read_channel_processed(batt->iio_i, &val->intval);
if (ret)
return ret;
val->intval *= 20000;
val->intval /= 15;
break;

View File

@ -372,7 +372,7 @@ static int devm_w1_max1721x_add_device(struct w1_slave *sl)
}
if (!info->rsense) {
dev_warn(info->w1_dev, "RSenese not calibrated, set 10 mOhms!\n");
dev_warn(info->w1_dev, "RSense not calibrated, set 10 mOhms!\n");
info->rsense = 1000; /* in regs in 10^-5 */
}
dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);

View File

@ -567,6 +567,7 @@ static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg
case 4800000:
case 4900000:
data = (uvolt - 4700000) / 100000;
break;
default:
dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n");
return -EINVAL;

View File

@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/err.h>
@ -140,8 +141,13 @@ static void power_supply_deferred_register_work(struct work_struct *work)
struct power_supply *psy = container_of(work, struct power_supply,
deferred_register_work.work);
if (psy->dev.parent)
mutex_lock(&psy->dev.parent->mutex);
if (psy->dev.parent) {
while (!mutex_trylock(&psy->dev.parent->mutex)) {
if (psy->removing)
return;
msleep(10);
}
}
power_supply_changed(psy);
@ -1082,6 +1088,7 @@ EXPORT_SYMBOL_GPL(devm_power_supply_register_no_ws);
void power_supply_unregister(struct power_supply *psy)
{
WARN_ON(atomic_dec_return(&psy->use_cnt));
psy->removing = true;
cancel_work_sync(&psy->changed_work);
cancel_delayed_work_sync(&psy->deferred_register_work);
sysfs_remove_link(&psy->dev.kobj, "powers");

View File

@ -23,6 +23,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/power/sbs-battery.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
@ -156,6 +157,9 @@ static enum power_supply_property sbs_properties[] = {
POWER_SUPPLY_PROP_MODEL_NAME
};
/* Supports special manufacturer commands from TI BQ20Z75 IC. */
#define SBS_FLAGS_TI_BQ20Z75 BIT(0)
struct sbs_info {
struct i2c_client *client;
struct power_supply *power_supply;
@ -168,6 +172,7 @@ struct sbs_info {
u32 poll_retry_count;
struct delayed_work work;
struct mutex mode_lock;
u32 flags;
};
static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
@ -315,17 +320,41 @@ static int sbs_status_correct(struct i2c_client *client, int *intval)
static int sbs_get_battery_presence_and_health(
struct i2c_client *client, enum power_supply_property psp,
union power_supply_propval *val)
{
int ret;
if (psp == POWER_SUPPLY_PROP_PRESENT) {
/* Dummy command; if it succeeds, battery is present. */
ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
if (ret < 0)
val->intval = 0; /* battery disconnected */
else
val->intval = 1; /* battery present */
} else { /* POWER_SUPPLY_PROP_HEALTH */
/* SBS spec doesn't have a general health command. */
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
}
return 0;
}
static int sbs_get_ti_battery_presence_and_health(
struct i2c_client *client, enum power_supply_property psp,
union power_supply_propval *val)
{
s32 ret;
/*
* Write to ManufacturerAccess with ManufacturerAccess command
* and then read the status. Do not check for error on the write
* since not all batteries implement write access to this command,
* while others mandate it.
* and then read the status.
*/
sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_STATUS);
ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_STATUS);
if (ret < 0) {
if (psp == POWER_SUPPLY_PROP_PRESENT)
val->intval = 0; /* battery removed */
return ret;
}
ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
if (ret < 0) {
@ -600,7 +629,12 @@ static int sbs_get_property(struct power_supply *psy,
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
case POWER_SUPPLY_PROP_HEALTH:
ret = sbs_get_battery_presence_and_health(client, psp, val);
if (client->flags & SBS_FLAGS_TI_BQ20Z75)
ret = sbs_get_ti_battery_presence_and_health(client,
psp, val);
else
ret = sbs_get_battery_presence_and_health(client, psp,
val);
if (psp == POWER_SUPPLY_PROP_PRESENT)
return 0;
break;
@ -806,6 +840,7 @@ static int sbs_probe(struct i2c_client *client,
if (!chip)
return -ENOMEM;
chip->flags = (u32)(uintptr_t)of_device_get_match_data(&client->dev);
chip->client = client;
chip->enable_detection = false;
psy_cfg.of_node = client->dev.of_node;
@ -911,16 +946,19 @@ static int sbs_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct sbs_info *chip = i2c_get_clientdata(client);
int ret;
if (chip->poll_time > 0)
cancel_delayed_work_sync(&chip->work);
/*
* Write to manufacturer access with sleep command.
* Support is manufacturer dependend, so ignore errors.
*/
sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_SLEEP);
if (chip->flags & SBS_FLAGS_TI_BQ20Z75) {
/* Write to manufacturer access with sleep command. */
ret = sbs_write_word_data(client,
sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_SLEEP);
if (chip->is_present && ret < 0)
return ret;
}
return 0;
}
@ -941,7 +979,10 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
static const struct of_device_id sbs_dt_ids[] = {
{ .compatible = "sbs,sbs-battery" },
{ .compatible = "ti,bq20z75" },
{
.compatible = "ti,bq20z75",
.data = (void *)SBS_FLAGS_TI_BQ20Z75,
},
{ }
};
MODULE_DEVICE_TABLE(of, sbs_dt_ids);

View File

@ -1,20 +1,8 @@
/*
* Battery charger driver for TI's tps65217
*
* Copyright (c) 2015, Collabora Ltd.
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// SPDX-License-Identifier: GPL-2.0
// Battery charger driver for TI's tps65217
//
// Copyright (C) 2015 Collabora Ltd.
// Author: Enric Balletbo i Serra <enric.balletbo@collabora.com>
/*
* Battery charger driver for TI's tps65217

View File

@ -230,7 +230,8 @@ static irqreturn_t wm8350_charger_handler(int irq, void *data)
case WM8350_IRQ_EXT_USB_FB:
case WM8350_IRQ_EXT_WALL_FB:
wm8350_charger_config(wm8350, policy);
case WM8350_IRQ_EXT_BAT_FB: /* Fall through */
/* Fall through */
case WM8350_IRQ_EXT_BAT_FB:
power_supply_changed(power->battery);
power_supply_changed(power->usb);
power_supply_changed(power->ac);

View File

@ -100,18 +100,6 @@ config W1_SLAVE_DS2438
Say Y here if you want to use a 1-wire
DS2438 Smart Battery Monitor device support
config W1_SLAVE_DS2760
tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
help
If you enable this you will have the DS2760 battery monitor
chip support.
The battery monitor chip is used in many batteries/devices
as the one who is responsible for charging/discharging/monitoring
Li+ batteries.
If you are unsure, say N.
config W1_SLAVE_DS2780
tristate "Dallas 2780 battery monitor chip"
help

View File

@ -14,7 +14,6 @@ obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2805) += w1_ds2805.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o

View File

@ -1,175 +0,0 @@
/*
* 1-Wire implementation for the ds2760 chip
*
* Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/idr.h>
#include <linux/gfp.h>
#include <linux/w1.h>
#include "w1_ds2760.h"
#define W1_FAMILY_DS2760 0x30
static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
int io)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
if (!dev)
return 0;
mutex_lock(&sl->master->bus_mutex);
if (addr > DS2760_DATA_SIZE || addr < 0) {
count = 0;
goto out;
}
if (addr + count > DS2760_DATA_SIZE)
count = DS2760_DATA_SIZE - addr;
if (!w1_reset_select_slave(sl)) {
if (!io) {
w1_write_8(sl->master, W1_DS2760_READ_DATA);
w1_write_8(sl->master, addr);
count = w1_read_block(sl->master, buf, count);
} else {
w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
w1_write_8(sl->master, addr);
w1_write_block(sl->master, buf, count);
/* XXX w1_write_block returns void, not n_written */
}
}
out:
mutex_unlock(&sl->master->bus_mutex);
return count;
}
int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
{
return w1_ds2760_io(dev, buf, addr, count, 0);
}
EXPORT_SYMBOL(w1_ds2760_read);
int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
{
return w1_ds2760_io(dev, buf, addr, count, 1);
}
EXPORT_SYMBOL(w1_ds2760_write);
static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
if (!dev)
return -EINVAL;
mutex_lock(&sl->master->bus_mutex);
if (w1_reset_select_slave(sl) == 0) {
w1_write_8(sl->master, cmd);
w1_write_8(sl->master, addr);
}
mutex_unlock(&sl->master->bus_mutex);
return 0;
}
int w1_ds2760_store_eeprom(struct device *dev, int addr)
{
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
}
EXPORT_SYMBOL(w1_ds2760_store_eeprom);
int w1_ds2760_recall_eeprom(struct device *dev, int addr)
{
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
}
EXPORT_SYMBOL(w1_ds2760_recall_eeprom);
static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
return w1_ds2760_read(dev, buf, off, count);
}
static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
static struct bin_attribute *w1_ds2760_bin_attrs[] = {
&bin_attr_w1_slave,
NULL,
};
static const struct attribute_group w1_ds2760_group = {
.bin_attrs = w1_ds2760_bin_attrs,
};
static const struct attribute_group *w1_ds2760_groups[] = {
&w1_ds2760_group,
NULL,
};
static int w1_ds2760_add_slave(struct w1_slave *sl)
{
int ret;
struct platform_device *pdev;
pdev = platform_device_alloc("ds2760-battery", PLATFORM_DEVID_AUTO);
if (!pdev)
return -ENOMEM;
pdev->dev.parent = &sl->dev;
ret = platform_device_add(pdev);
if (ret)
goto pdev_add_failed;
dev_set_drvdata(&sl->dev, pdev);
return 0;
pdev_add_failed:
platform_device_put(pdev);
return ret;
}
static void w1_ds2760_remove_slave(struct w1_slave *sl)
{
struct platform_device *pdev = dev_get_drvdata(&sl->dev);
platform_device_unregister(pdev);
}
static struct w1_family_ops w1_ds2760_fops = {
.add_slave = w1_ds2760_add_slave,
.remove_slave = w1_ds2760_remove_slave,
.groups = w1_ds2760_groups,
};
static struct w1_family w1_ds2760_family = {
.fid = W1_FAMILY_DS2760,
.fops = &w1_ds2760_fops,
};
module_w1_family(w1_ds2760_family);
MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));

View File

@ -1,59 +0,0 @@
/*
* 1-Wire implementation for the ds2760 chip
*
* Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
*/
#ifndef __w1_ds2760_h__
#define __w1_ds2760_h__
/* Known commands to the DS2760 chip */
#define W1_DS2760_SWAP 0xAA
#define W1_DS2760_READ_DATA 0x69
#define W1_DS2760_WRITE_DATA 0x6C
#define W1_DS2760_COPY_DATA 0x48
#define W1_DS2760_RECALL_DATA 0xB8
#define W1_DS2760_LOCK 0x6A
/* Number of valid register addresses */
#define DS2760_DATA_SIZE 0x40
#define DS2760_PROTECTION_REG 0x00
#define DS2760_STATUS_REG 0x01
#define DS2760_STATUS_IE (1 << 2)
#define DS2760_STATUS_SWEN (1 << 3)
#define DS2760_STATUS_RNAOP (1 << 4)
#define DS2760_STATUS_PMOD (1 << 5)
#define DS2760_EEPROM_REG 0x07
#define DS2760_SPECIAL_FEATURE_REG 0x08
#define DS2760_VOLTAGE_MSB 0x0c
#define DS2760_VOLTAGE_LSB 0x0d
#define DS2760_CURRENT_MSB 0x0e
#define DS2760_CURRENT_LSB 0x0f
#define DS2760_CURRENT_ACCUM_MSB 0x10
#define DS2760_CURRENT_ACCUM_LSB 0x11
#define DS2760_TEMP_MSB 0x18
#define DS2760_TEMP_LSB 0x19
#define DS2760_EEPROM_BLOCK0 0x20
#define DS2760_ACTIVE_FULL 0x20
#define DS2760_EEPROM_BLOCK1 0x30
#define DS2760_STATUS_WRITE_REG 0x31
#define DS2760_RATED_CAPACITY 0x32
#define DS2760_CURRENT_OFFSET_BIAS 0x33
#define DS2760_ACTIVE_EMPTY 0x3b
extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
size_t count);
extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
size_t count);
extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
#endif /* !__w1_ds2760_h__ */

View File

@ -26,6 +26,7 @@
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/hwmon.h>
#include <linux/of.h>
#include <linux/atomic.h>
@ -686,6 +687,8 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
sl->dev.bus = &w1_bus_type;
sl->dev.release = &w1_slave_release;
sl->dev.groups = w1_slave_groups;
sl->dev.of_node = of_find_matching_node(sl->master->dev.of_node,
sl->family->of_match_table);
dev_set_name(&sl->dev, "%02x-%012llx",
(unsigned int) sl->reg_num.family,

View File

@ -269,6 +269,7 @@ struct power_supply {
spinlock_t changed_lock;
bool changed;
bool initialized;
bool removing;
atomic_t use_cnt;
#ifdef CONFIG_THERMAL
struct thermal_zone_device *tzd;

View File

@ -274,6 +274,8 @@ struct w1_family {
struct w1_family_ops *fops;
const struct of_device_id *of_match_table;
atomic_t refcnt;
};