fpga: Add scatterlist based programming

Requiring contiguous kernel memory is not a good idea, this is a limited
resource and allocation can fail under normal work loads.

This introduces a .write_sg op that supporting drivers can provide
to DMA directly from dis-contiguous memory and a new entry point
fpga_mgr_buf_load_sg that users can call to directly provide page
lists.

The full matrix of compatibility is provided, either the linear or sg
interface can be used by the user with a driver supporting either
interface.

A notable change for drivers is that the .write op can now be called
multiple times.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Jason Gunthorpe 2017-02-01 12:48:44 -07:00 committed by Greg Kroah-Hartman
parent b496df86ac
commit baa6d39663
3 changed files with 230 additions and 36 deletions

View File

@ -22,7 +22,16 @@ To program the FPGA from a file or from a buffer:
struct fpga_image_info *info,
const char *buf, size_t count);
Load the FPGA from an image which exists as a buffer in memory.
Load the FPGA from an image which exists as a contiguous buffer in
memory. Allocating contiguous kernel memory for the buffer should be avoided,
users are encouraged to use the _sg interface instead of this.
int fpga_mgr_buf_load_sg(struct fpga_manager *mgr,
struct fpga_image_info *info,
struct sg_table *sgt);
Load the FPGA from an image from non-contiguous in memory. Callers can
construct a sg_table using alloc_page backed memory.
int fpga_mgr_firmware_load(struct fpga_manager *mgr,
struct fpga_image_info *info,
@ -166,7 +175,7 @@ success or negative error codes otherwise.
The programming sequence is:
1. .write_init
2. .write (may be called once or multiple times)
2. .write or .write_sg (may be called once or multiple times)
3. .write_complete
The .write_init function will prepare the FPGA to receive the image data. The
@ -176,7 +185,11 @@ buffer up at least this much before starting.
The .write function writes a buffer to the FPGA. The buffer may be contain the
whole FPGA image or may be a smaller chunk of an FPGA image. In the latter
case, this function is called multiple times for successive chunks.
case, this function is called multiple times for successive chunks. This interface
is suitable for drivers which use PIO.
The .write_sg version behaves the same as .write except the input is a sg_table
scatter list. This interface is suitable for drivers which use DMA.
The .write_complete function is called after all the image has been written
to put the FPGA into operating mode.

View File

@ -25,16 +25,106 @@
#include <linux/of.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/highmem.h>
static DEFINE_IDA(fpga_mgr_ida);
static struct class *fpga_mgr_class;
/*
* Call the low level driver's write_init function. This will do the
* device-specific things to get the FPGA into the state where it is ready to
* receive an FPGA image. The low level driver only gets to see the first
* initial_header_size bytes in the buffer.
*/
static int fpga_mgr_write_init_buf(struct fpga_manager *mgr,
struct fpga_image_info *info,
const char *buf, size_t count)
{
int ret;
mgr->state = FPGA_MGR_STATE_WRITE_INIT;
if (!mgr->mops->initial_header_size)
ret = mgr->mops->write_init(mgr, info, NULL, 0);
else
ret = mgr->mops->write_init(
mgr, info, buf, min(mgr->mops->initial_header_size, count));
if (ret) {
dev_err(&mgr->dev, "Error preparing FPGA for writing\n");
mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR;
return ret;
}
return 0;
}
static int fpga_mgr_write_init_sg(struct fpga_manager *mgr,
struct fpga_image_info *info,
struct sg_table *sgt)
{
struct sg_mapping_iter miter;
size_t len;
char *buf;
int ret;
if (!mgr->mops->initial_header_size)
return fpga_mgr_write_init_buf(mgr, info, NULL, 0);
/*
* First try to use miter to map the first fragment to access the
* header, this is the typical path.
*/
sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
if (sg_miter_next(&miter) &&
miter.length >= mgr->mops->initial_header_size) {
ret = fpga_mgr_write_init_buf(mgr, info, miter.addr,
miter.length);
sg_miter_stop(&miter);
return ret;
}
sg_miter_stop(&miter);
/* Otherwise copy the fragments into temporary memory. */
buf = kmalloc(mgr->mops->initial_header_size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
len = sg_copy_to_buffer(sgt->sgl, sgt->nents, buf,
mgr->mops->initial_header_size);
ret = fpga_mgr_write_init_buf(mgr, info, buf, len);
kfree(buf);
return ret;
}
/*
* After all the FPGA image has been written, do the device specific steps to
* finish and set the FPGA into operating mode.
*/
static int fpga_mgr_write_complete(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
int ret;
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE;
ret = mgr->mops->write_complete(mgr, info);
if (ret) {
dev_err(&mgr->dev, "Error after writing image data to FPGA\n");
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
return ret;
}
mgr->state = FPGA_MGR_STATE_OPERATING;
return 0;
}
/**
* fpga_mgr_buf_load - load fpga from image in buffer
* fpga_mgr_buf_load_sg - load fpga from image in buffer from a scatter list
* @mgr: fpga manager
* @info: fpga image specific information
* @buf: buffer contain fpga image
* @count: byte count of buf
* @sgt: scatterlist table
*
* Step the low level fpga manager through the device-specific steps of getting
* an FPGA ready to be configured, writing the image to it, then doing whatever
@ -42,54 +132,139 @@ static struct class *fpga_mgr_class;
* mgr pointer from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is
* not an error code.
*
* This is the preferred entry point for FPGA programming, it does not require
* any contiguous kernel memory.
*
* Return: 0 on success, negative error code otherwise.
*/
int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
const char *buf, size_t count)
int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info,
struct sg_table *sgt)
{
struct device *dev = &mgr->dev;
int ret;
/*
* Call the low level driver's write_init function. This will do the
* device-specific things to get the FPGA into the state where it is
* ready to receive an FPGA image. The low level driver only gets to
* see the first initial_header_size bytes in the buffer.
*/
mgr->state = FPGA_MGR_STATE_WRITE_INIT;
ret = mgr->mops->write_init(mgr, info, buf,
min(mgr->mops->initial_header_size, count));
ret = fpga_mgr_write_init_sg(mgr, info, sgt);
if (ret)
return ret;
/* Write the FPGA image to the FPGA. */
mgr->state = FPGA_MGR_STATE_WRITE;
if (mgr->mops->write_sg) {
ret = mgr->mops->write_sg(mgr, sgt);
} else {
struct sg_mapping_iter miter;
sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG);
while (sg_miter_next(&miter)) {
ret = mgr->mops->write(mgr, miter.addr, miter.length);
if (ret)
break;
}
sg_miter_stop(&miter);
}
if (ret) {
dev_err(dev, "Error preparing FPGA for writing\n");
mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR;
dev_err(&mgr->dev, "Error while writing image data to FPGA\n");
mgr->state = FPGA_MGR_STATE_WRITE_ERR;
return ret;
}
return fpga_mgr_write_complete(mgr, info);
}
EXPORT_SYMBOL_GPL(fpga_mgr_buf_load_sg);
static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr,
struct fpga_image_info *info,
const char *buf, size_t count)
{
int ret;
ret = fpga_mgr_write_init_buf(mgr, info, buf, count);
if (ret)
return ret;
/*
* Write the FPGA image to the FPGA.
*/
mgr->state = FPGA_MGR_STATE_WRITE;
ret = mgr->mops->write(mgr, buf, count);
if (ret) {
dev_err(dev, "Error while writing image data to FPGA\n");
dev_err(&mgr->dev, "Error while writing image data to FPGA\n");
mgr->state = FPGA_MGR_STATE_WRITE_ERR;
return ret;
}
/*
* After all the FPGA image has been written, do the device specific
* steps to finish and set the FPGA into operating mode.
*/
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE;
ret = mgr->mops->write_complete(mgr, info);
if (ret) {
dev_err(dev, "Error after writing image data to FPGA\n");
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
return ret;
}
mgr->state = FPGA_MGR_STATE_OPERATING;
return fpga_mgr_write_complete(mgr, info);
}
return 0;
/**
* fpga_mgr_buf_load - load fpga from image in buffer
* @mgr: fpga manager
* @flags: flags setting fpga confuration modes
* @buf: buffer contain fpga image
* @count: byte count of buf
*
* Step the low level fpga manager through the device-specific steps of getting
* an FPGA ready to be configured, writing the image to it, then doing whatever
* post-configuration steps necessary. This code assumes the caller got the
* mgr pointer from of_fpga_mgr_get() and checked that it is not an error code.
*
* Return: 0 on success, negative error code otherwise.
*/
int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
const char *buf, size_t count)
{
struct page **pages;
struct sg_table sgt;
const void *p;
int nr_pages;
int index;
int rc;
/*
* This is just a fast path if the caller has already created a
* contiguous kernel buffer and the driver doesn't require SG, non-SG
* drivers will still work on the slow path.
*/
if (mgr->mops->write)
return fpga_mgr_buf_load_mapped(mgr, info, buf, count);
/*
* Convert the linear kernel pointer into a sg_table of pages for use
* by the driver.
*/
nr_pages = DIV_ROUND_UP((unsigned long)buf + count, PAGE_SIZE) -
(unsigned long)buf / PAGE_SIZE;
pages = kmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL);
if (!pages)
return -ENOMEM;
p = buf - offset_in_page(buf);
for (index = 0; index < nr_pages; index++) {
if (is_vmalloc_addr(p))
pages[index] = vmalloc_to_page(p);
else
pages[index] = kmap_to_page((void *)p);
if (!pages[index]) {
kfree(pages);
return -EFAULT;
}
p += PAGE_SIZE;
}
/*
* The temporary pages list is used to code share the merging algorithm
* in sg_alloc_table_from_pages
*/
rc = sg_alloc_table_from_pages(&sgt, pages, index, offset_in_page(buf),
count, GFP_KERNEL);
kfree(pages);
if (rc)
return rc;
rc = fpga_mgr_buf_load_sg(mgr, info, &sgt);
sg_free_table(&sgt);
return rc;
}
EXPORT_SYMBOL_GPL(fpga_mgr_buf_load);
@ -291,8 +466,9 @@ int fpga_mgr_register(struct device *dev, const char *name,
struct fpga_manager *mgr;
int id, ret;
if (!mops || !mops->write_init || !mops->write ||
!mops->write_complete || !mops->state) {
if (!mops || !mops->write_complete || !mops->state ||
!mops->write_init || (!mops->write && !mops->write_sg) ||
(mops->write && mops->write_sg)) {
dev_err(dev, "Attempt to register without fpga_manager_ops\n");
return -EINVAL;
}

View File

@ -22,6 +22,7 @@
#define _LINUX_FPGA_MGR_H
struct fpga_manager;
struct sg_table;
/**
* enum fpga_mgr_states - fpga framework states
@ -88,6 +89,7 @@ struct fpga_image_info {
* @state: returns an enum value of the FPGA's state
* @write_init: prepare the FPGA to receive confuration data
* @write: write count bytes of configuration data to the FPGA
* @write_sg: write the scatter list of configuration data to the FPGA
* @write_complete: set FPGA to operating state after writing is done
* @fpga_remove: optional: Set FPGA into a specific state during driver remove
*
@ -102,6 +104,7 @@ struct fpga_manager_ops {
struct fpga_image_info *info,
const char *buf, size_t count);
int (*write)(struct fpga_manager *mgr, const char *buf, size_t count);
int (*write_sg)(struct fpga_manager *mgr, struct sg_table *sgt);
int (*write_complete)(struct fpga_manager *mgr,
struct fpga_image_info *info);
void (*fpga_remove)(struct fpga_manager *mgr);
@ -129,6 +132,8 @@ struct fpga_manager {
int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
const char *buf, size_t count);
int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info,
struct sg_table *sgt);
int fpga_mgr_firmware_load(struct fpga_manager *mgr,
struct fpga_image_info *info,