MLK-16347-6 drm/bridge: adv7511: Add new compatible string

Added "adi,adv7535" to the adv7511 drm bridge and adi,adv7511.txt doc,
since the driver can also support the ADV7535 chipset (upgrade of ADV7533).

Signed-off-by: Robert Chiras <robert.chiras@nxp.com>

Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt

@@ -1,10 +1,10 @@
-Analog Device ADV7511(W)/13/33 HDMI Encoders
+Analog Device ADV7511(W)/13/33/35 HDMI Encoders
 -----------------------------------------
 
-The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters
-compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
-S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while
-the others support RGB interface.
+The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
+transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
+conversion, S/PDIF, CEC and HDCP. ADV7533 and ADV7535 support the DSI interface
+for input pixels, while the others support RGB interface.
 
 Required properties:
 
@@ -13,6 +13,7 @@ Required properties:
 		"adi,adv7511w"
 		"adi,adv7513"
 		"adi,adv7533"
+		"adi,adv7535"
 
 - reg: I2C slave addresses
   The ADV7511 internal registers are split into four pages exposed through
@@ -52,7 +53,7 @@ The following input format properties are required except in "rgb 1x" and
 - bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
   needed only for ADV7511.
 
-The following properties are required for ADV7533:
+The following properties are required for ADV7533 and ADV7535:
 
 - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
   be one of 1, 2, 3 or 4.
@@ -71,9 +72,9 @@ Optional properties:
 - adi,embedded-sync: The input uses synchronization signals embedded in the
   data stream (similar to BT.656). Defaults to separate H/V synchronization
   signals.
-- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
-  generator. The chip will rely on the sync signals in the DSI data lanes,
-  rather than generate its own timings for HDMI output.
+- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the
+  internal timing generator. The chip will rely on the sync signals in the DSI
+  data lanes, rather than generate its own timings for HDMI output.
 - clocks: from common clock binding: reference to the CEC clock.
 - clock-names: from common clock binding: must be "cec".
 - reg-names : Names of maps with programmable addresses.
@@ -85,9 +86,9 @@ Required nodes:
 The ADV7511 has two video ports. Their connections are modelled using the OF
 graph bindings specified in Documentation/devicetree/bindings/graph.txt.
 
-- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
-  remote endpoint phandle should be a reference to a valid mipi_dsi_host device
-  node.
+- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533 and
+  ADV7535, the remote endpoint phandle should be a reference to a valid
+  mipi_dsi_host device node.
 - Video port 1 for the HDMI output
 - Audio port 2 for the HDMI audio input
 

drivers/gpu/drm/bridge/adv7511/adv7511_drv.c

@@ -1268,6 +1268,7 @@ static const struct i2c_device_id adv7511_i2c_ids[] = {
 	{ "adv7513", ADV7511 },
 #ifdef CONFIG_DRM_I2C_ADV7533
 	{ "adv7533", ADV7533 },
+	{ "adv7535", ADV7533 },
 #endif
 	{ }
 };
@@ -1279,6 +1280,7 @@ static const struct of_device_id adv7511_of_ids[] = {
 	{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
 #ifdef CONFIG_DRM_I2C_ADV7533
 	{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
+	{ .compatible = "adi,adv7535", .data = (void *)ADV7533 },
 #endif
 	{ }
 };