From b2f8546056b355c479e87fe07df9b8b021facba3 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 4 Sep 2020 22:18:31 +0200 Subject: [PATCH] media: i2c: ov5640: Separate out mipi configuration from s_power [ Upstream commit b1751ae652fb95919c08df5bdd739ccf9886158a ] In preparation for adding DVP configuration in s_power callback move mipi configuration into separate function Signed-off-by: Lad Prabhakar Reviewed-by: Biju Das Tested-by: Jacopo Mondi Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin --- drivers/media/i2c/ov5640.c | 124 +++++++++++++++++++------------------ 1 file changed, 64 insertions(+), 60 deletions(-) diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index 065f9706db7e..3c6ad2dd9c0e 100644 --- a/drivers/media/i2c/ov5640.c +++ b/drivers/media/i2c/ov5640.c @@ -2000,6 +2000,61 @@ static void ov5640_set_power_off(struct ov5640_dev *sensor) clk_disable_unprepare(sensor->xclk); } +static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) +{ + int ret; + + if (!on) { + /* Reset MIPI bus settings to their default values. */ + ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58); + ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04); + ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00); + return 0; + } + + /* + * Power up MIPI HS Tx and LS Rx; 2 data lanes mode + * + * 0x300e = 0x40 + * [7:5] = 010 : 2 data lanes mode (see FIXME note in + * "ov5640_set_stream_mipi()") + * [4] = 0 : Power up MIPI HS Tx + * [3] = 0 : Power up MIPI LS Rx + * [2] = 0 : MIPI interface disabled + */ + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40); + if (ret) + return ret; + + /* + * Gate clock and set LP11 in 'no packets mode' (idle) + * + * 0x4800 = 0x24 + * [5] = 1 : Gate clock when 'no packets' + * [2] = 1 : MIPI bus in LP11 when 'no packets' + */ + ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24); + if (ret) + return ret; + + /* + * Set data lanes and clock in LP11 when 'sleeping' + * + * 0x3019 = 0x70 + * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping' + * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' + * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' + */ + ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70); + if (ret) + return ret; + + /* Give lanes some time to coax into LP11 state. */ + usleep_range(500, 1000); + + return 0; +} + static int ov5640_set_power(struct ov5640_dev *sensor, bool on) { int ret = 0; @@ -2012,68 +2067,17 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on) ret = ov5640_restore_mode(sensor); if (ret) goto power_off; - - /* We're done here for DVP bus, while CSI-2 needs setup. */ - if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY) - return 0; - - /* - * Power up MIPI HS Tx and LS Rx; 2 data lanes mode - * - * 0x300e = 0x40 - * [7:5] = 010 : 2 data lanes mode (see FIXME note in - * "ov5640_set_stream_mipi()") - * [4] = 0 : Power up MIPI HS Tx - * [3] = 0 : Power up MIPI LS Rx - * [2] = 0 : MIPI interface disabled - */ - ret = ov5640_write_reg(sensor, - OV5640_REG_IO_MIPI_CTRL00, 0x40); - if (ret) - goto power_off; - - /* - * Gate clock and set LP11 in 'no packets mode' (idle) - * - * 0x4800 = 0x24 - * [5] = 1 : Gate clock when 'no packets' - * [2] = 1 : MIPI bus in LP11 when 'no packets' - */ - ret = ov5640_write_reg(sensor, - OV5640_REG_MIPI_CTRL00, 0x24); - if (ret) - goto power_off; - - /* - * Set data lanes and clock in LP11 when 'sleeping' - * - * 0x3019 = 0x70 - * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping' - * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping' - * [4] = 1 : MIPI clock lane in LP11 when 'sleeping' - */ - ret = ov5640_write_reg(sensor, - OV5640_REG_PAD_OUTPUT00, 0x70); - if (ret) - goto power_off; - - /* Give lanes some time to coax into LP11 state. */ - usleep_range(500, 1000); - - } else { - if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) { - /* Reset MIPI bus settings to their default values. */ - ov5640_write_reg(sensor, - OV5640_REG_IO_MIPI_CTRL00, 0x58); - ov5640_write_reg(sensor, - OV5640_REG_MIPI_CTRL00, 0x04); - ov5640_write_reg(sensor, - OV5640_REG_PAD_OUTPUT00, 0x00); - } - - ov5640_set_power_off(sensor); } + if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) { + ret = ov5640_set_power_mipi(sensor, on); + if (ret) + goto power_off; + } + + if (!on) + ov5640_set_power_off(sensor); + return 0; power_off: