scripts/spelling.txt: add regsiter -> register spelling mistake

This typo is quite common.  Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Stephen Boyd 2017-05-08 15:57:50 -07:00 committed by Linus Torvalds
parent d1b7c9344b
commit ad61dd303a
25 changed files with 29 additions and 28 deletions

View File

@ -845,7 +845,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
* state->dataAlign;
break;
case DW_CFA_def_cfa_register:
unw_debug("cfa_def_cfa_regsiter: ");
unw_debug("cfa_def_cfa_register: ");
state->cfa.reg = get_uleb128(&ptr.p8, end);
break;
/*todo case DW_CFA_def_cfa_expression: */

View File

@ -269,7 +269,7 @@ int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
/*
* Register our undef instruction hooks with ARM undef core.
* We regsiter a hook specifically looking for the KGB break inst
* We register a hook specifically looking for the KGB break inst
* and we handle the normal undef case within the do_undefinstr
* handler.
*/

View File

@ -43,14 +43,14 @@
int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
/*
* Base address for PCI regsiter region
* Base address for PCI register region
*/
unsigned long ixp4xx_pci_reg_base = 0;
/*
* PCI cfg an I/O routines are done by programming a
* command/byte enable register, and then read/writing
* the data from a data regsiter. We need to ensure
* the data from a data register. We need to ensure
* these transactions are atomic or we will end up
* with corrupt data on the bus or in a driver.
*/

View File

@ -776,7 +776,7 @@ muls64_zero:
# ALGORITHM *********************************************************** #
# In the interest of simplicity, all operands are converted to #
# longword size whether the operation is byte, word, or long. The #
# bounds are sign extended accordingly. If Rn is a data regsiter, Rn is #
# bounds are sign extended accordingly. If Rn is a data register, Rn is #
# also sign extended. If Rn is an address register, it need not be sign #
# extended since the full register is always used. #
# The condition codes are set correctly before the final "rts". #

View File

@ -1876,7 +1876,7 @@ movp_read_err:
# word, or longword sized operands. Then, in the interest of #
# simplicity, all operands are converted to longword size whether the #
# operation is byte, word, or long. The bounds are sign extended #
# accordingly. If Rn is a data regsiter, Rn is also sign extended. If #
# accordingly. If Rn is a data register, Rn is also sign extended. If #
# Rn is an address register, it need not be sign extended since the #
# full register is always used. #
# The comparisons are made and the condition codes calculated. #

View File

@ -152,7 +152,7 @@ static int __cvmx_helper_errata_asx_pass1(int interface, int port,
}
/**
* Configure all of the ASX, GMX, and PKO regsiters required
* Configure all of the ASX, GMX, and PKO registers required
* to get RGMII to function on the supplied interface.
*
* @interface: PKO Interface to configure (0 or 1)

View File

@ -55,7 +55,7 @@ extern int __cvmx_helper_rgmii_probe(int interface);
extern void cvmx_helper_rgmii_internal_loopback(int port);
/**
* Configure all of the ASX, GMX, and PKO regsiters required
* Configure all of the ASX, GMX, and PKO registers required
* to get RGMII to function on the supplied interface.
*
* @interface: PKO Interface to configure (0 or 1)

View File

@ -1369,7 +1369,7 @@ nadtlb_nullify:
/*
When there is no translation for the probe address then we
must nullify the insn and return zero in the target regsiter.
must nullify the insn and return zero in the target register.
This will indicate to the calling code that it does not have
write/read privileges to this address.

View File

@ -186,7 +186,7 @@ static u32 acop_get_inst(struct pt_regs *regs)
}
/**
* @regs: regsiters at time of interrupt
* @regs: registers at time of interrupt
* @address: storage address
* @error_code: Fault code, usually the DSISR or ESR depending on
* processor type

View File

@ -95,7 +95,7 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
/* pcc mapped address + header size + offset within PCC subspace */
#define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs))
/* Check if a CPC regsiter is in PCC */
/* Check if a CPC register is in PCC */
#define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
(cpc)->cpc_entry.reg.space_id == \
ACPI_ADR_SPACE_PLATFORM_COMM)

View File

@ -128,7 +128,7 @@ static void qcom_cc_gdsc_unregister(void *data)
/*
* Backwards compatibility with old DTs. Register a pass-through factor 1/1
* clock to translate 'path' clk into 'name' clk and regsiter the 'path'
* clock to translate 'path' clk into 'name' clk and register the 'path'
* clk as a fixed rate clock if it isn't present.
*/
static int _qcom_cc_register_board_clk(struct device *dev, const char *path,

View File

@ -236,7 +236,7 @@ use_defaults:
return 0;
}
static int sti_cpufreq_fetch_syscon_regsiters(void)
static int sti_cpufreq_fetch_syscon_registers(void)
{
struct device *dev = ddata.cpu;
struct device_node *np = dev->of_node;
@ -275,7 +275,7 @@ static int sti_cpufreq_init(void)
goto skip_voltage_scaling;
}
ret = sti_cpufreq_fetch_syscon_regsiters();
ret = sti_cpufreq_fetch_syscon_registers();
if (ret)
goto skip_voltage_scaling;

View File

@ -1721,7 +1721,7 @@ int hns_roce_v1_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
roce_set_field(mpt_entry->mpt_byte_64, MPT_BYTE_64_L_KEY_IDX_H_M,
MPT_BYTE_64_L_KEY_IDX_H_S, mtpt_idx >> MTPT_IDX_SHIFT);
/* DMA memory regsiter */
/* DMA memory register */
if (mr->type == MR_TYPE_DMA)
return 0;

View File

@ -205,7 +205,7 @@ int hns_roce_mtt_init(struct hns_roce_dev *hr_dev, int npages, int page_shift,
return 0;
}
/* Note: if page_shift is zero, FAST memory regsiter */
/* Note: if page_shift is zero, FAST memory register */
mtt->page_shift = page_shift;
/* Compute MTT entry necessary */

View File

@ -413,7 +413,7 @@
/* RSCFDnRPGACCr */
#define RCANFD_C_RPGACC(r) (0x1900 + (0x04 * (r)))
/* CAN FD mode specific regsiter map */
/* CAN FD mode specific register map */
/* RSCFDnCFDCmXXX -> RCANFD_F_XXX(m) */
#define RCANFD_F_DCFG(m) (0x0500 + (0x20 * (m)))

View File

@ -48,7 +48,7 @@ eg., if the value 10011010b is written into the least significant byte of a comm
/* 32 bit registers */
#define ASF_STAT 0x00 /* ASF status register */
#define CHIPID 0x04 /* Chip ID regsiter */
#define CHIPID 0x04 /* Chip ID register */
#define MIB_DATA 0x10 /* MIB data register */
#define MIB_ADDR 0x14 /* MIB address register */
#define STAT0 0x30 /* Status0 register */
@ -648,7 +648,7 @@ typedef enum {
/* driver ioctl parameters */
#define AMD8111E_REG_DUMP_LEN 13*sizeof(u32)
/* amd8111e desriptor format */
/* amd8111e descriptor format */
struct amd8111e_tx_dr{

View File

@ -307,7 +307,7 @@ void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel)
/*
* atl1c_read_phy_core
* core function to read register in PHY via MDIO control regsiter.
* core function to read register in PHY via MDIO control register.
* ext: extension register (see IEEE 802.3)
* dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0)
* reg: reg to read

View File

@ -127,7 +127,7 @@ out:
* @offset: register offset to be read
* @data: pointer to the read data
*
* Reads the MDI control regsiter in the PHY at offset and stores the
* Reads the MDI control register in the PHY at offset and stores the
* information read to data.
**/
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)

View File

@ -652,7 +652,7 @@ struct scu_iit_entry {
/*
* TODO: Where is the SAS_LNKTOV regsiter?
* TODO: Where is the SAS_LNKTOV register?
* TODO: Where is the SAS_PHYTOV register? */
#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1)
@ -1827,7 +1827,7 @@ struct scu_peg_registers {
};
/**
* struct scu_registers - SCU regsiters including both PEG registers if we turn
* struct scu_registers - SCU registers including both PEG registers if we turn
* on that compile option. All of these registers are in the memory mapped
* space returned from BAR1.
*

View File

@ -1421,7 +1421,7 @@ void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
Mpi2EventNotificationReply_t *mpi_reply);
void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
u8 bits_to_regsiter);
u8 bits_to_register);
int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
u8 *issue_reset);

View File

@ -80,7 +80,7 @@ struct pci_dev;
#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */
#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */
#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */
#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */
#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal register */
#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */
#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */

View File

@ -72,7 +72,7 @@ ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops);
* CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION_SAFE, STUB and
* IPMODIFY are a kind of attribute flags which can be set only before
* registering the ftrace_ops, and can not be modified while registered.
* Changing those attribute flags after regsitering ftrace_ops will
* Changing those attribute flags after registering ftrace_ops will
* cause unexpected results.
*
* ENABLED - set/unset when ftrace_ops is registered/unregistered

View File

@ -355,7 +355,7 @@ struct ipmi_cmdspec {
#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \
struct ipmi_cmdspec)
/*
* Unregister a regsitered command. error values:
* Unregister a registered command. error values:
* - EFAULT - an address supplied was invalid.
* - ENOENT - The netfn/cmd was not found registered for this user.
*/

View File

@ -891,6 +891,7 @@ registerd||registered
registeresd||registered
registes||registers
registraration||registration
regsiter||register
regster||register
regualar||regular
reguator||regulator

View File

@ -936,7 +936,7 @@ static struct snd_soc_component *soc_find_component(
*
* @dlc: name of the DAI and optional component info to match
*
* This function will search all regsitered components and their DAIs to
* This function will search all registered components and their DAIs to
* find the DAI of the same name. The component's of_node and name
* should also match if being specified.
*