dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml

nand-controller.yaml replaced nand.txt however the references to it were
not updated. This change updates these references wherever it appears in
bindings documentation.

Fixes: 212e496935 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Kamal Dasu 2019-05-21 15:27:57 -04:00 committed by Rob Herring
parent 8d665693c2
commit a5f2246fb9
15 changed files with 39 additions and 39 deletions

View File

@ -24,7 +24,7 @@ Optional children nodes:
Children nodes represent the available nand chips.
Other properties:
see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
Example demonstrate on AXG SoC:

View File

@ -101,12 +101,12 @@ Required properties:
number (e.g., 0, 1, 2, etc.)
- #address-cells : see partition.txt
- #size-cells : see partition.txt
- nand-ecc-strength : see nand.txt
- nand-ecc-step-size : must be 512 or 1024. See nand.txt
- nand-ecc-strength : see nand-controller.yaml
- nand-ecc-step-size : must be 512 or 1024. See nand-controller.yaml
Optional properties:
- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this
chip-select. See nand.txt
chip-select. See nand-controller.yaml
- brcm,nand-oob-sector-size : integer, to denote the spare area sector size
expected for the ECC layout in use. This size, in
addition to the strength and step-size,

View File

@ -22,16 +22,16 @@ Sub-nodes:
select is connected.
Optional properties:
- nand-ecc-step-size: see nand.txt for details.
- nand-ecc-step-size: see nand-controller.yaml for details.
If present, the value must be
512 for "altr,socfpga-denali-nand"
1024 for "socionext,uniphier-denali-nand-v5a"
1024 for "socionext,uniphier-denali-nand-v5b"
- nand-ecc-strength: see nand.txt for details. Valid values are:
- nand-ecc-strength: see nand-controller.yaml for details. Valid values are:
8, 15 for "altr,socfpga-denali-nand"
8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
8, 16 for "socionext,uniphier-denali-nand-v5b"
- nand-ecc-maximize: see nand.txt for details
- nand-ecc-maximize: see nand-controller.yaml for details
The chip nodes may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.

View File

@ -30,9 +30,9 @@ Optional properties:
command is asserted. Zero means one cycle, 255 means 256
cycles.
- bank: default NAND bank to use (0-3 are valid, 0 is the default).
- nand-ecc-mode : see nand.txt
- nand-ecc-strength : see nand.txt
- nand-ecc-step-size : see nand.txt
- nand-ecc-mode : see nand-controller.yaml
- nand-ecc-strength : see nand-controller.yaml
- nand-ecc-step-size : see nand-controller.yaml
Can support 1-bit HW ECC (default) or if stronger correction is required,
software-based BCH.

View File

@ -8,7 +8,7 @@ explained in a separate documents - please refer to
Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
For NAND specific properties such as ECC modes or bus width, please refer to
Documentation/devicetree/bindings/mtd/nand.txt
Documentation/devicetree/bindings/mtd/nand-controller.yaml
Required properties:

View File

@ -7,7 +7,7 @@ Required properties:
NAND controller's registers. The second contains base
physical address and size of NAND controller's buffer.
- interrupts: Interrupt number for nfc.
- nand-bus-width: See nand.txt.
- nand-bus-width: See nand-controller.yaml.
- nand-ecc-mode: Support none and hw ecc mode.
- #address-cells: Partition address, should be set 1.
- #size-cells: Partition size, should be set 1.

View File

@ -36,29 +36,29 @@ Children nodes represent the available NAND chips.
Required properties:
- reg: shall contain the native Chip Select ids (0-3).
- nand-rb: see nand.txt (0-1).
- nand-rb: see nand-controller.yaml (0-1).
Optional properties:
- marvell,nand-keep-config: orders the driver not to take the timings
from the core and leaving them completely untouched. Bootloader
timings will then be used.
- label: MTD name.
- nand-on-flash-bbt: see nand.txt.
- nand-ecc-mode: see nand.txt. Will use hardware ECC if not specified.
- nand-ecc-algo: see nand.txt. This property is essentially useful when
- nand-on-flash-bbt: see nand-controller.yaml.
- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified.
- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when
not using hardware ECC. Howerver, it may be added when using hardware
ECC for clarification but will be ignored by the driver because ECC
mode is chosen depending on the page size and the strength required by
the NAND chip. This value may be overwritten with nand-ecc-strength
property.
- nand-ecc-strength: see nand.txt.
- nand-ecc-step-size: see nand.txt. Marvell's NAND flash controller does
- nand-ecc-strength: see nand-controller.yaml.
- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does
use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual
step size will shrink or grow in order to fit the required strength.
Step sizes are not completely random for all and follow certain
patterns described in AN-379, "Marvell SoC NFC ECC".
See Documentation/devicetree/bindings/mtd/nand.txt for more details on
See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
generic bindings.

View File

@ -4,9 +4,9 @@ Required properties:
- compatible: "fsl,imxXX-nand"
- reg: address range of the nfc block
- interrupts: irq to be used
- nand-bus-width: see nand.txt
- nand-ecc-mode: see nand.txt
- nand-on-flash-bbt: see nand.txt
- nand-bus-width: see nand-controller.yaml
- nand-ecc-mode: see nand-controller.yaml
- nand-on-flash-bbt: see nand-controller.yaml
Example:

View File

@ -26,14 +26,14 @@ Optional children node properties:
"hw" is supported.
- nand-ecc-algo: string, algorithm of NAND ECC.
Supported values with "hw" ECC mode are: "rs", "bch".
- nand-bus-width : See nand.txt
- nand-on-flash-bbt: See nand.txt
- nand-bus-width : See nand-controller.yaml
- nand-on-flash-bbt: See nand-controller.yaml
- nand-ecc-strength: integer representing the number of bits to correct
per ECC step (always 512). Supported strength using HW ECC
modes are:
- RS: 4, 6, 8
- BCH: 4, 8, 14, 16
- nand-ecc-maximize: See nand.txt
- nand-ecc-maximize: See nand-controller.yaml
- nand-is-boot-medium: Makes sure only ECC strengths supported by the boot ROM
are chosen.
- wp-gpios: GPIO specifier for the write protect pin.

View File

@ -1,6 +1,6 @@
* Oxford Semiconductor OXNAS NAND Controller
Please refer to nand.txt for generic information regarding MTD NAND bindings.
Please refer to nand-controller.yaml for generic information regarding MTD NAND bindings.
Required properties:
- compatible: "oxsemi,ox820-nand"

View File

@ -47,8 +47,8 @@ Required properties:
- #size-cells: see partition.txt
Optional properties:
- nand-bus-width: see nand.txt
- nand-ecc-strength: see nand.txt. If not specified, then ECC strength will
- nand-bus-width: see nand-controller.yaml
- nand-ecc-strength: see nand-controller.yaml. If not specified, then ECC strength will
be used according to chip requirement and available
OOB size.

View File

@ -6,7 +6,7 @@ Required properties:
"samsung,s3c2412-nand"
"samsung,s3c2440-nand"
- reg : register's location and length.
- #address-cells, #size-cells : see nand.txt
- #address-cells, #size-cells : see nand-controller.yaml
- clocks : phandle to the nand controller clock
- clock-names : must contain "nand"
@ -14,8 +14,8 @@ Optional child nodes:
Child nodes representing the available nand chips.
Optional child properties:
- nand-ecc-mode : see nand.txt
- nand-on-flash-bbt : see nand.txt
- nand-ecc-mode : see nand-controller.yaml
- nand-on-flash-bbt : see nand-controller.yaml
Each child device node may optionally contain a 'partitions' sub-node,
which further contains sub-nodes describing the flash partition mapping.

View File

@ -24,9 +24,9 @@ Required properties:
- reg: describes the CS lines assigned to the NAND device.
Optional properties:
- nand-on-flash-bbt: see nand.txt
- nand-ecc-strength: see nand.txt
- nand-ecc-step-size: see nand.txt
- nand-on-flash-bbt: see nand-controller.yaml
- nand-ecc-strength: see nand-controller.yaml
- nand-ecc-step-size: see nand-controller.yaml
The following ECC strength and step size are currently supported:
- nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)

View File

@ -11,7 +11,7 @@ Required properties:
- #size-cells: <0>
Children nodes represent the available NAND chips.
See Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
See Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
Example:

View File

@ -25,14 +25,14 @@ only handle one NAND chip.
Required properties:
- compatible: Should be set to "fsl,vf610-nfc-cs".
- nand-bus-width: see nand.txt
- nand-ecc-mode: see nand.txt
- nand-bus-width: see nand-controller.yaml
- nand-ecc-mode: see nand-controller.yaml
Required properties for hardware ECC:
- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt)
- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand-controller.yaml)
- nand-ecc-step-size: step size equals page size, currently only 2k pages are
supported
- nand-on-flash-bbt: see nand.txt
- nand-on-flash-bbt: see nand-controller.yaml
Example: