Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...
This commit is contained in:
Linus Torvalds 2018-08-15 15:04:25 -07:00
commit 9a76aba02a
1752 changed files with 119281 additions and 29178 deletions

View File

@ -11,7 +11,7 @@ KernelVersion: v2.6.22
Contact: linux-wireless@vger.kernel.org,
Description: The rfkill class subsystem folder.
Each registered rfkill driver is represented by an rfkillX
subfolder (X being an integer > 0).
subfolder (X being an integer >= 0).
What: /sys/class/rfkill/rfkill[0-9]+/name
@ -48,8 +48,8 @@ Contact: linux-wireless@vger.kernel.org
Description: Current state of the transmitter.
This file was scheduled to be removed in 2014, but due to its
large number of users it will be sticking around for a bit
longer. Despite it being marked as stabe, the newer "hard" and
"soft" interfaces should be preffered, since it is not possible
longer. Despite it being marked as stable, the newer "hard" and
"soft" interfaces should be preferred, since it is not possible
to express the 'soft and hard block' state of the rfkill driver
through this interface. There will likely be another attempt to
remove it in the future.

View File

@ -42,6 +42,17 @@ Description:
network device transmit queue. Possible vaules depend on the
number of available CPU(s) in the system.
What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs
Date: June 2018
KernelVersion: 4.18.0
Contact: netdev@vger.kernel.org
Description:
Mask of the receive queue(s) currently enabled to participate
into the Transmit Packet Steering packet processing flow for this
network device transmit queue. Possible values depend on the
number of available receive queue(s) in the network device.
Default is disabled.
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
Date: November 2011
KernelVersion: 3.3

View File

@ -106,9 +106,9 @@ into the bpf-next tree will make their way into net-next tree. net and
net-next are both run by David S. Miller. From there, they will go
into the kernel mainline tree run by Linus Torvalds. To read up on the
process of net and net-next being merged into the mainline tree, see
the `netdev FAQ`_ under:
the :ref:`netdev-FAQ`
`Documentation/networking/netdev-FAQ.txt`_
Occasionally, to prevent merge conflicts, we might send pull requests
to other trees (e.g. tracing) with a small subset of the patches, but
@ -125,8 +125,8 @@ request)::
Q: How do I indicate which tree (bpf vs. bpf-next) my patch should be applied to?
---------------------------------------------------------------------------------
A: The process is the very same as described in the `netdev FAQ`_, so
please read up on it. The subject line must indicate whether the
A: The process is the very same as described in the :ref:`netdev-FAQ`,
so please read up on it. The subject line must indicate whether the
patch is a fix or rather "next-like" content in order to let the
maintainers know whether it is targeted at bpf or bpf-next.
@ -184,7 +184,7 @@ ii) run extensive BPF test suite and
Once the BPF pull request was accepted by David S. Miller, then
the patches end up in net or net-next tree, respectively, and
make their way from there further into mainline. Again, see the
`netdev FAQ`_ for additional information e.g. on how often they are
:ref:`netdev-FAQ` for additional information e.g. on how often they are
merged to mainline.
Q: How long do I need to wait for feedback on my BPF patches?
@ -208,7 +208,7 @@ Q: Are patches applied to bpf-next when the merge window is open?
-----------------------------------------------------------------
A: For the time when the merge window is open, bpf-next will not be
processed. This is roughly analogous to net-next patch processing,
so feel free to read up on the `netdev FAQ`_ about further details.
so feel free to read up on the :ref:`netdev-FAQ` about further details.
During those two weeks of merge window, we might ask you to resend
your patch series once bpf-next is open again. Once Linus released
@ -372,7 +372,7 @@ netdev kernel mailing list in Cc and ask for the fix to be queued up:
netdev@vger.kernel.org
The process in general is the same as on netdev itself, see also the
`netdev FAQ`_ document.
:ref:`netdev-FAQ`.
Q: Do you also backport to kernels not currently maintained as stable?
----------------------------------------------------------------------
@ -388,9 +388,7 @@ Q: The BPF patch I am about to submit needs to go to stable as well
What should I do?
A: The same rules apply as with netdev patch submissions in general, see
`netdev FAQ`_ under:
`Documentation/networking/netdev-FAQ.txt`_
the :ref:`netdev-FAQ`.
Never add "``Cc: stable@vger.kernel.org``" to the patch description, but
ask the BPF maintainers to queue the patches instead. This can be done
@ -630,8 +628,7 @@ when:
.. Links
.. _Documentation/process/: https://www.kernel.org/doc/html/latest/process/
.. _MAINTAINERS: ../../MAINTAINERS
.. _Documentation/networking/netdev-FAQ.txt: ../networking/netdev-FAQ.txt
.. _netdev FAQ: ../networking/netdev-FAQ.txt
.. _netdev-FAQ: ../networking/netdev-FAQ.rst
.. _samples/bpf/: ../../samples/bpf/
.. _selftests: ../../tools/testing/selftests/bpf/
.. _Documentation/dev-tools/kselftest.rst:

View File

@ -1,5 +1,5 @@
=================
BPF documentation
BPF Documentation
=================
This directory contains documentation for the BPF (Berkeley Packet
@ -22,14 +22,14 @@ Frequently asked questions (FAQ)
Two sets of Questions and Answers (Q&A) are maintained.
* QA for common questions about BPF see: bpf_design_QA_
.. toctree::
:maxdepth: 1
* QA for developers interacting with BPF subsystem: bpf_devel_QA_
bpf_design_QA
bpf_devel_QA
.. Links:
.. _bpf_design_QA: bpf_design_QA.rst
.. _bpf_devel_QA: bpf_devel_QA.rst
.. _Documentation/networking/filter.txt: ../networking/filter.txt
.. _man-pages: https://www.kernel.org/doc/man-pages/
.. _bpf(2): http://man7.org/linux/man-pages/man2/bpf.2.html

View File

@ -13,14 +13,17 @@ MDIO multiplexer node:
Every non-ethernet PHY requires a compatible so that it could be probed based
on this compatible string.
Optional properties:
- clocks: phandle of the core clock which drives the mdio block.
Additional information regarding generic multiplexer properties can be found
at- Documentation/devicetree/bindings/net/mdio-mux.txt
for example:
mdio_mux_iproc: mdio-mux@6602023c {
mdio_mux_iproc: mdio-mux@66020000 {
compatible = "brcm,mdio-mux-iproc";
reg = <0x6602023c 0x14>;
reg = <0x66020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;

View File

@ -2,19 +2,25 @@ Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
---------------------------------------------------------
Required properties:
- compatible : Should be "xlnx,zynq-can-1.0" for Zynq CAN
controllers and "xlnx,axi-can-1.00.a" for Axi CAN
controllers.
- reg : Physical base address and size of the Axi CAN/Zynq
CANPS registers map.
- compatible : Should be:
- "xlnx,zynq-can-1.0" for Zynq CAN controllers
- "xlnx,axi-can-1.00.a" for Axi CAN controllers
- "xlnx,canfd-1.0" for CAN FD controllers
- reg : Physical base address and size of the controller
registers map.
- interrupts : Property with a value describing the interrupt
number.
- clock-names : List of input clock names - "can_clk", "pclk"
(For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
- clock-names : List of input clock names
- "can_clk", "pclk" (For CANPS),
- "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
- tx-fifo-depth : Can Tx fifo depth.
- rx-fifo-depth : Can Rx fifo depth.
- tx-fifo-depth : Can Tx fifo depth (Zynq, Axi CAN).
- rx-fifo-depth : Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
sequential Rx mode).
- tx-mailbox-count : Can Tx mailbox buffer count (CAN FD).
- rx-mailbox-count : Can Rx mailbox buffer count (CAN FD in mailbox Rx
mode).
Example:
@ -41,3 +47,14 @@ For Axi CAN Dts file:
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
};
For CAN FD Dts file:
canfd_0: canfd@40000000 {
compatible = "xlnx,canfd-1.0";
clocks = <&clkc 0>, <&clkc 1>;
clock-names = "can_clk", "s_axi_aclk";
reg = <0x40000000 0x2000>;
interrupt-parent = <&intc>;
interrupts = <0 59 1>;
tx-mailbox-count = <0x20>;
rx-fifo-depth = <0x20>;
};

View File

@ -24,6 +24,14 @@ Required properties:
"brcm,bcm53018-srab"
"brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
"brcm,bcm11404-srab"
"brcm,bcm11407-srab"
"brcm,bcm11409-srab"
"brcm,bcm58310-srab"
"brcm,bcm58311-srab"
"brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
"brcm,bcm58522-srab"
"brcm,bcm58523-srab"

View File

@ -0,0 +1,153 @@
Realtek SMI-based Switches
==========================
The SMI "Simple Management Interface" is a two-wire protocol using
bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
not use the MDIO protocol. This binding defines how to specify the
SMI-based Realtek devices.
Required properties:
- compatible: must be exactly one of:
"realtek,rtl8366"
"realtek,rtl8366rb" (4+1 ports)
"realtek,rtl8366s" (4+1 ports)
"realtek,rtl8367"
"realtek,rtl8367b"
"realtek,rtl8368s" (8 port)
"realtek,rtl8369"
"realtek,rtl8370" (8 port)
Required properties:
- mdc-gpios: GPIO line for the MDC clock line.
- mdio-gpios: GPIO line for the MDIO data line.
- reset-gpios: GPIO line for the reset signal.
Optional properties:
- realtek,disable-leds: if the LED drivers are not used in the
hardware design this will disable them so they are not turned on
and wasting power.
Required subnodes:
- interrupt-controller
This defines an interrupt controller with an IRQ line (typically
a GPIO) that will demultiplex and handle the interrupt from the single
interrupt line coming out of one of the SMI-based chips. It most
importantly provides link up/down interrupts to the PHY blocks inside
the ASIC.
Required properties of interrupt-controller:
- interrupt: parent interrupt, see interrupt-controller/interrupts.txt
- interrupt-controller: see interrupt-controller/interrupts.txt
- #address-cells: should be <0>
- #interrupt-cells: should be <1>
- mdio
This defines the internal MDIO bus of the SMI device, mostly for the
purpose of being able to hook the interrupts to the right PHY and
the right PHY to the corresponding port.
Required properties of mdio:
- compatible: should be set to "realtek,smi-mdio" for all SMI devices
See net/mdio.txt for additional MDIO bus properties.
See net/dsa/dsa.txt for a list of additional required and optional properties
and subnodes of DSA switches.
Examples:
switch {
compatible = "realtek,rtl8366rb";
/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
switch_intc: interrupt-controller {
/* GPIO 15 provides the interrupt */
interrupt-parent = <&gpio0>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
ports {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
port@0 {
reg = <0>;
label = "lan0";
phy-handle = <&phy0>;
};
port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&phy1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&phy2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-handle = <&phy3>;
};
port@4 {
reg = <4>;
label = "wan";
phy-handle = <&phy4>;
};
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
compatible = "realtek,smi-mdio", "dsa-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@0 {
reg = <0>;
interrupt-parent = <&switch_intc>;
interrupts = <0>;
};
phy1: phy@1 {
reg = <1>;
interrupt-parent = <&switch_intc>;
interrupts = <1>;
};
phy2: phy@2 {
reg = <2>;
interrupt-parent = <&switch_intc>;
interrupts = <2>;
};
phy3: phy@3 {
reg = <3>;
interrupt-parent = <&switch_intc>;
interrupts = <3>;
};
phy4: phy@4 {
reg = <4>;
interrupt-parent = <&switch_intc>;
interrupts = <12>;
};
};
};

View File

@ -0,0 +1,81 @@
Vitesse VSC73xx Switches
========================
This defines device tree bindings for the Vitesse VSC73xx switch chips.
The Vitesse company has been acquired by Microsemi and Microsemi in turn
acquired by Microchip but retains this vendor branding.
The currently supported switch chips are:
Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
The device tree node is an SPI device so it must reside inside a SPI bus
device tree node, see spi/spi-bus.txt
Required properties:
- compatible: must be exactly one of:
"vitesse,vsc7385"
"vitesse,vsc7388"
"vitesse,vsc7395"
"vitesse,vsc7398"
- gpio-controller: indicates that this switch is also a GPIO controller,
see gpio/gpio.txt
- #gpio-cells: this must be set to <2> and indicates that we are a twocell
GPIO controller, see gpio/gpio.txt
Optional properties:
- reset-gpios: a handle to a GPIO line that can issue reset of the chip.
It should be tagged as active low.
Required subnodes:
See net/dsa/dsa.txt for a list of additional required and optional properties
and subnodes of DSA switches.
Examples:
switch@0 {
compatible = "vitesse,vsc7395";
reg = <0>;
/* Specified for 2.5 MHz or below */
spi-max-frequency = <2500000>;
gpio-controller;
#gpio-cells = <2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
vsc: port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};

View File

@ -356,30 +356,7 @@ ethernet@e0000 {
============================================================================
FMan IEEE 1588 Node
DESCRIPTION
The FMan interface to support IEEE 1588
PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
Definition: A standard property.
Must include "fsl,fman-ptp-timer".
- reg
Usage: required
Value type: <prop-encoded-array>
Definition: A standard property.
EXAMPLE
ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
=============================================================================
FMan MDIO Node

View File

@ -0,0 +1,35 @@
MediaTek SoC built-in Bluetooth Devices
==================================
This device is a serial attached device to BTIF device and thus it must be a
child node of the serial node with BTIF. The dt-bindings details for BTIF
device can be known via Documentation/devicetree/bindings/serial/8250.txt.
Required properties:
- compatible: Must be
"mediatek,mt7622-bluetooth": for MT7622 SoC
- clocks: Should be the clock specifiers corresponding to the entry in
clock-names property.
- clock-names: Should contain "ref" entries.
- power-domains: Phandle to the power domain that the device is part of
Example:
btif: serial@1100c000 {
compatible = "mediatek,mt7622-btif",
"mediatek,mtk-btif";
reg = <0 0x1100c000 0 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_BTIF_PD>;
clock-names = "main";
reg-shift = <2>;
reg-io-width = <4>;
bluetooth {
compatible = "mediatek,mt7622-bluetooth";
power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
clocks = <&clk25m>;
clock-names = "ref";
};
};

View File

@ -10,12 +10,25 @@ device the slave device is attached to.
Required properties:
- compatible: should contain one of the following:
* "qcom,qca6174-bt"
* "qcom,wcn3990-bt"
Optional properties for compatible string qcom,qca6174-bt:
Optional properties:
- enable-gpios: gpio specifier used to enable chip
- clocks: clock provided to the controller (SUSCLK_32KHZ)
Example:
Required properties for compatible string qcom,wcn3990-bt:
- vddio-supply: VDD_IO supply regulator handle.
- vddxo-supply: VDD_XO supply regulator handle.
- vddrf-supply: VDD_RF supply regulator handle.
- vddch0-supply: VDD_CH0 supply regulator handle.
Optional properties for compatible string qcom,wcn3990-bt:
- max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
Examples:
serial@7570000 {
label = "BT-UART";
@ -28,3 +41,15 @@ serial@7570000 {
clocks = <&divclk4>;
};
};
serial@898000 {
bluetooth {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&vreg_s4a_1p8>;
vddxo-supply = <&vreg_l7a_1p8>;
vddrf-supply = <&vreg_l17a_1p3>;
vddch0-supply = <&vreg_l25a_3p3>;
max-speed = <3200000>;
};
};

View File

@ -4,6 +4,7 @@ The device node has following properties.
Required properties:
- compatible: should be "rockchip,<name>-gamc"
"rockchip,px30-gmac": found on PX30 SoCs
"rockchip,rk3128-gmac": found on RK312x SoCs
"rockchip,rk3228-gmac": found on RK322x SoCs
"rockchip,rk3288-gmac": found on RK3288 SoCs

View File

@ -1,7 +1,8 @@
* STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC)
Required properties:
- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or
"snps,dwxgmac-<ip_version>", "snps,dwxgmac".
For backwards compatibility: "st,spear600-gmac" is also supported.
- reg: Address and length of the register set for the device
- interrupts: Should contain the STMMAC interrupts

View File

@ -2,7 +2,8 @@
General Properties:
- compatible Should be "fsl,etsec-ptp"
- compatible Should be "fsl,etsec-ptp" for eTSEC
Should be "fsl,fman-ptp-timer" for DPAA FMan
- reg Offset and length of the register set for the device
- interrupts There should be at least two interrupts. Some devices
have as many as four PTP related interrupts.
@ -43,14 +44,22 @@ Clock Properties:
value, which will be directly written in those bits, that is why,
according to reference manual, the next clock sources can be used:
For eTSEC,
<0> - external high precision timer reference clock (TSEC_TMR_CLK
input is used for this purpose);
<1> - eTSEC system clock;
<2> - eTSEC1 transmit clock;
<3> - RTC clock input.
When this attribute is not used, eTSEC system clock will serve as
IEEE 1588 timer reference clock.
For DPAA FMan,
<0> - external high precision timer reference clock (TMR_1588_CLK)
<1> - MAC system clock (1/2 FMan clock)
<2> - reserved
<3> - RTC clock oscillator
When this attribute is not used, the IEEE 1588 timer reference clock
will use the eTSEC system clock (for Gianfar) or the MAC system
clock (for DPAA).
Example:

View File

@ -397,6 +397,7 @@ v3 V3 Semiconductor
variscite Variscite Ltd.
via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
vitesse Vitesse Semiconductor Corporation
vivante Vivante Corporation
vocore VoCore Studio
voipac Voipac Technologies s.r.o.

View File

@ -92,6 +92,7 @@ needed).
crypto/index
filesystems/index
vm/index
bpf/index
Architecture-specific documentation
-----------------------------------

View File

@ -18,8 +18,6 @@ README.ipw2200
- README for the Intel PRO/Wireless 2915ABG and 2200BG driver.
README.sb1000
- info on General Instrument/NextLevel SURFboard1000 cable modem.
alias.txt
- info on using alias network devices.
altera_tse.txt
- Altera Triple-Speed Ethernet controller.
arcnet-hardware.txt
@ -140,8 +138,6 @@ multiqueue.txt
- HOWTO for multiqueue network device support.
netconsole.txt
- The network console module netconsole.ko: configuration and notes.
netdev-FAQ.txt
- FAQ describing how to submit net changes to netdev mailing list.
netdev-features.txt
- Network interface features API description.
netdevices.txt

View File

@ -0,0 +1,49 @@
.. SPDX-License-Identifier: GPL-2.0
===========
IP-Aliasing
===========
IP-aliases are an obsolete way to manage multiple IP-addresses/masks
per interface. Newer tools such as iproute2 support multiple
address/prefixes per interface, but aliases are still supported
for backwards compatibility.
An alias is formed by adding a colon and a string when running ifconfig.
This string is usually numeric, but this is not a must.
Alias creation
==============
Alias creation is done by 'magic' interface naming: eg. to create a
200.1.1.1 alias for eth0 ...
::
# ifconfig eth0:0 200.1.1.1 etc,etc....
~~ -> request alias #0 creation (if not yet exists) for eth0
The corresponding route is also set up by this command. Please note:
The route always points to the base interface.
Alias deletion
==============
The alias is removed by shutting the alias down::
# ifconfig eth0:0 down
~~~~~~~~~~ -> will delete alias
Alias (re-)configuring
======================
Aliases are not real devices, but programs should be able to configure
and refer to them as usual (ifconfig, route, etc).
Relationship with main device
=============================
If the base device is shut down the added aliases will be deleted too.

View File

@ -1,40 +0,0 @@
IP-Aliasing:
============
IP-aliases are an obsolete way to manage multiple IP-addresses/masks
per interface. Newer tools such as iproute2 support multiple
address/prefixes per interface, but aliases are still supported
for backwards compatibility.
An alias is formed by adding a colon and a string when running ifconfig.
This string is usually numeric, but this is not a must.
o Alias creation.
Alias creation is done by 'magic' interface naming: eg. to create a
200.1.1.1 alias for eth0 ...
# ifconfig eth0:0 200.1.1.1 etc,etc....
~~ -> request alias #0 creation (if not yet exists) for eth0
The corresponding route is also set up by this command.
Please note: The route always points to the base interface.
o Alias deletion.
The alias is removed by shutting the alias down:
# ifconfig eth0:0 down
~~~~~~~~~~ -> will delete alias
o Alias (re-)configuring
Aliases are not real devices, but programs should be able to configure and
refer to them as usual (ifconfig, route, etc).
o Relationship with main device
If the base device is shut down the added aliases will be deleted
too.

View File

@ -1,3 +1,9 @@
.. SPDX-License-Identifier: GPL-2.0
=================
Ethernet Bridging
=================
In order to use the Ethernet bridging functionality, you'll need the
userspace tools.

View File

@ -0,0 +1,332 @@
=================
The UCAN Protocol
=================
UCAN is the protocol used by the microcontroller-based USB-CAN
adapter that is integrated on System-on-Modules from Theobroma Systems
and that is also available as a standalone USB stick.
The UCAN protocol has been designed to be hardware-independent.
It is modeled closely after how Linux represents CAN devices
internally. All multi-byte integers are encoded as Little Endian.
All structures mentioned in this document are defined in
``drivers/net/can/usb/ucan.c``.
USB Endpoints
=============
UCAN devices use three USB endpoints:
CONTROL endpoint
The driver sends device management commands on this endpoint
IN endpoint
The device sends CAN data frames and CAN error frames
OUT endpoint
The driver sends CAN data frames on the out endpoint
CONTROL Messages
================
UCAN devices are configured using vendor requests on the control pipe.
To support multiple CAN interfaces in a single USB device all
configuration commands target the corresponding interface in the USB
descriptor.
The driver uses ``ucan_ctrl_command_in/out`` and
``ucan_device_request_in`` to deliver commands to the device.
Setup Packet
------------
================= =====================================================
``bmRequestType`` Direction | Vendor | (Interface or Device)
``bRequest`` Command Number
``wValue`` Subcommand Number (16 Bit) or 0 if not used
``wIndex`` USB Interface Index (0 for device commands)
``wLength`` * Host to Device - Number of bytes to transmit
* Device to Host - Maximum Number of bytes to
receive. If the device send less. Commom ZLP
semantics are used.
================= =====================================================
Error Handling
--------------
The device indicates failed control commands by stalling the
pipe.
Device Commands
---------------
UCAN_DEVICE_GET_FW_STRING
~~~~~~~~~~~~~~~~~~~~~~~~~
*Dev2Host; optional*
Request the device firmware string.
Interface Commands
------------------
UCAN_COMMAND_START
~~~~~~~~~~~~~~~~~~
*Host2Dev; mandatory*
Bring the CAN interface up.
Payload Format
``ucan_ctl_payload_t.cmd_start``
==== ============================
mode or mask of ``UCAN_MODE_*``
==== ============================
UCAN_COMMAND_STOP
~~~~~~~~~~~~~~~~~~
*Host2Dev; mandatory*
Stop the CAN interface
Payload Format
*empty*
UCAN_COMMAND_RESET
~~~~~~~~~~~~~~~~~~
*Host2Dev; mandatory*
Reset the CAN controller (including error counters)
Payload Format
*empty*
UCAN_COMMAND_GET
~~~~~~~~~~~~~~~~
*Host2Dev; mandatory*
Get Information from the Device
Subcommands
^^^^^^^^^^^
UCAN_COMMAND_GET_INFO
Request the device information structure ``ucan_ctl_payload_t.device_info``.
See the ``device_info`` field for details, and
``uapi/linux/can/netlink.h`` for an explanation of the
``can_bittiming fields``.
Payload Format
``ucan_ctl_payload_t.device_info``
UCAN_COMMAND_GET_PROTOCOL_VERSION
Request the device protocol version
``ucan_ctl_payload_t.protocol_version``. The current protocol version is 3.
Payload Format
``ucan_ctl_payload_t.protocol_version``
.. note:: Devices that do not implement this command use the old
protocol version 1
UCAN_COMMAND_SET_BITTIMING
~~~~~~~~~~~~~~~~~~~~~~~~~~
*Host2Dev; mandatory*
Setup bittiming by sending the the structure
``ucan_ctl_payload_t.cmd_set_bittiming`` (see ``struct bittiming`` for
details)
Payload Format
``ucan_ctl_payload_t.cmd_set_bittiming``.
UCAN_SLEEP/WAKE
~~~~~~~~~~~~~~~
*Host2Dev; optional*
Configure sleep and wake modes. Not yet supported by the driver.
UCAN_FILTER
~~~~~~~~~~~
*Host2Dev; optional*
Setup hardware CAN filters. Not yet supported by the driver.
Allowed interface commands
--------------------------
================== =================== ==================
Legal Device State Command New Device State
================== =================== ==================
stopped SET_BITTIMING stopped
stopped START started
started STOP or RESET stopped
stopped STOP or RESET stopped
started RESTART started
any GET *no change*
================== =================== ==================
IN Message Format
=================
A data packet on the USB IN endpoint contains one or more
``ucan_message_in`` values. If multiple messages are batched in a USB
data packet, the ``len`` field can be used to jump to the next
``ucan_message_in`` value (take care to sanity-check the ``len`` value
against the actual data size).
.. _can_ucan_in_message_len:
``len`` field
-------------
Each ``ucan_message_in`` must be aligned to a 4-byte boundary (relative
to the start of the start of the data buffer). That means that there
may be padding bytes between multiple ``ucan_message_in`` values:
.. code::
+----------------------------+ < 0
| |
| struct ucan_message_in |
| |
+----------------------------+ < len
[padding]
+----------------------------+ < round_up(len, 4)
| |
| struct ucan_message_in |
| |
+----------------------------+
[...]
``type`` field
--------------
The ``type`` field specifies the type of the message.
UCAN_IN_RX
~~~~~~~~~~
``subtype``
zero
Data received from the CAN bus (ID + payload).
UCAN_IN_TX_COMPLETE
~~~~~~~~~~~~~~~~~~~
``subtype``
zero
The CAN device has sent a message to the CAN bus. It answers with a
list of of tuples <echo-ids, flags>.
The echo-id identifies the frame from (echos the id from a previous
UCAN_OUT_TX message). The flag indicates the result of the
transmission. Whereas a set Bit 0 indicates success. All other bits
are reserved and set to zero.
Flow Control
------------
When receiving CAN messages there is no flow control on the USB
buffer. The driver has to handle inbound message quickly enough to
avoid drops. I case the device buffer overflow the condition is
reported by sending corresponding error frames (see
:ref:`can_ucan_error_handling`)
OUT Message Format
==================
A data packet on the USB OUT endpoint contains one or more ``struct
ucan_message_out`` values. If multiple messages are batched into one
data packet, the device uses the ``len`` field to jump to the next
ucan_message_out value. Each ucan_message_out must be aligned to 4
bytes (relative to the start of the data buffer). The mechanism is
same as described in :ref:`can_ucan_in_message_len`.
.. code::
+----------------------------+ < 0
| |
| struct ucan_message_out |
| |
+----------------------------+ < len
[padding]
+----------------------------+ < round_up(len, 4)
| |
| struct ucan_message_out |
| |
+----------------------------+
[...]
``type`` field
--------------
In protocol version 3 only ``UCAN_OUT_TX`` is defined, others are used
only by legacy devices (protocol version 1).
UCAN_OUT_TX
~~~~~~~~~~~
``subtype``
echo id to be replied within a CAN_IN_TX_COMPLETE message
Transmit a CAN frame. (parameters: ``id``, ``data``)
Flow Control
------------
When the device outbound buffers are full it starts sending *NAKs* on
the *OUT* pipe until more buffers are available. The driver stops the
queue when a certain threshold of out packets are incomplete.
.. _can_ucan_error_handling:
CAN Error Handling
==================
If error reporting is turned on the device encodes errors into CAN
error frames (see ``uapi/linux/can/error.h``) and sends it using the
IN endpoint. The driver updates its error statistics and forwards
it.
Although UCAN devices can suppress error frames completely, in Linux
the driver is always interested. Hence, the device is always started with
the ``UCAN_MODE_BERR_REPORT`` set. Filtering those messages for the
user space is done by the driver.
Bus OFF
-------
- The device does not recover from bus of automatically.
- Bus OFF is indicated by an error frame (see ``uapi/linux/can/error.h``)
- Bus OFF recovery is started by ``UCAN_COMMAND_RESTART``
- Once Bus OFF recover is completed the device sends an error frame
indicating that it is on ERROR-ACTIVE state.
- During Bus OFF no frames are sent by the device.
- During Bus OFF transmission requests from the host are completed
immediately with the success bit left unset.
Example Conversation
====================
#) Device is connected to USB
#) Host sends command ``UCAN_COMMAND_RESET``, subcmd 0
#) Host sends command ``UCAN_COMMAND_GET``, subcmd ``UCAN_COMMAND_GET_INFO``
#) Device sends ``UCAN_IN_DEVICE_INFO``
#) Host sends command ``UCAN_OUT_SET_BITTIMING``
#) Host sends command ``UCAN_COMMAND_START``, subcmd 0, mode ``UCAN_MODE_BERR_REPORT``

View File

@ -6,15 +6,21 @@ Contents:
.. toctree::
:maxdepth: 2
netdev-FAQ
af_xdp
batman-adv
can
can_ucan_protocol
dpaa2/index
e100
e1000
kapi
z8530book
msg_zerocopy
failover
net_failover
alias
bridge
.. only:: subproject

View File

@ -81,6 +81,15 @@ fib_multipath_hash_policy - INTEGER
0 - Layer 3
1 - Layer 4
ip_forward_update_priority - INTEGER
Whether to update SKB priority from "TOS" field in IPv4 header after it
is forwarded. The new SKB priority is mapped from TOS field value
according to an rt_tos2priority table (see e.g. man tc-prio).
Default: 1 (Update priority.)
Possible values:
0 - Do not update priority.
1 - Update priority.
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
@ -733,11 +742,11 @@ tcp_limit_output_bytes - INTEGER
Controls TCP Small Queue limit per tcp socket.
TCP bulk sender tends to increase packets in flight until it
gets losses notifications. With SNDBUF autotuning, this can
result in a large amount of packets queued in qdisc/device
on the local machine, hurting latency of other flows, for
typical pfifo_fast qdiscs.
tcp_limit_output_bytes limits the number of bytes on qdisc
or device to reduce artificial RTT/cwnd and reduce bufferbloat.
result in a large amount of packets queued on the local machine
(e.g.: qdiscs, CPU backlog, or device) hurting latency of other
flows, for typical pfifo_fast qdiscs. tcp_limit_output_bytes
limits the number of bytes on qdisc or device to reduce artificial
RTT/cwnd and reduce bufferbloat.
Default: 262144
tcp_challenge_ack_limit - INTEGER
@ -1834,6 +1843,16 @@ stable_secret - IPv6 address
By default the stable secret is unset.
addr_gen_mode - INTEGER
Defines how link-local and autoconf addresses are generated.
0: generate address based on EUI64 (default)
1: do no generate a link-local address, use EUI64 for addresses generated
from autoconf
2: generate stable privacy addresses, using the secret from
stable_secret (RFC7217)
3: generate stable privacy addresses, using a random secret if unset
drop_unicast_in_l2_multicast - BOOLEAN
Drop any unicast IPv6 packets that are received in link-layer
multicast (or broadcast) frames.
@ -1863,6 +1882,11 @@ ratelimit - INTEGER
otherwise the minimal space between responses in milliseconds.
Default: 1000
echo_ignore_all - BOOLEAN
If set non-zero, then the kernel will ignore all ICMP ECHO
requests sent to it over the IPv6 protocol.
Default: 0
xfrm6_gc_thresh - INTEGER
The threshold at which we will start garbage collecting for IPv6
destination cache entries. At twice this value the system will

View File

@ -36,37 +36,39 @@ feature on the virtio-net interface and assign the same MAC address to both
virtio-net and VF interfaces.
Here is an example XML snippet that shows such configuration.
::
<interface type='network'>
<mac address='52:54:00:00:12:53'/>
<source network='enp66s0f0_br'/>
<target dev='tap01'/>
<model type='virtio'/>
<driver name='vhost' queues='4'/>
<link state='down'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</interface>
<interface type='hostdev' managed='yes'>
<mac address='52:54:00:00:12:53'/>
<source>
<address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
<interface type='network'>
<mac address='52:54:00:00:12:53'/>
<source network='enp66s0f0_br'/>
<target dev='tap01'/>
<model type='virtio'/>
<driver name='vhost' queues='4'/>
<link state='down'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</interface>
<interface type='hostdev' managed='yes'>
<mac address='52:54:00:00:12:53'/>
<source>
<address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
Booting a VM with the above configuration will result in the following 3
netdevs created in the VM.
::
4: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
inet 192.168.12.53/24 brd 192.168.12.255 scope global dynamic ens10
valid_lft 42482sec preferred_lft 42482sec
inet6 fe80::97d8:db2:8c10:b6d6/64 scope link
valid_lft forever preferred_lft forever
5: ens10nsby: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master ens10 state UP group default qlen 1000
link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
7: ens11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ens10 state UP group default qlen 1000
link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
4: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
inet 192.168.12.53/24 brd 192.168.12.255 scope global dynamic ens10
valid_lft 42482sec preferred_lft 42482sec
inet6 fe80::97d8:db2:8c10:b6d6/64 scope link
valid_lft forever preferred_lft forever
5: ens10nsby: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master ens10 state UP group default qlen 1000
link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
7: ens11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ens10 state UP group default qlen 1000
link/ether 52:54:00:00:12:53 brd ff:ff:ff:ff:ff:ff
ens10 is the 'failover' master netdev, ens10nsby and ens11 are the slave
'standby' and 'primary' netdevs respectively.
@ -80,37 +82,38 @@ the paravirtual datapath when the VF is unplugged.
Here is a sample script that shows the steps to initiate live migration on
the source hypervisor.
::
# cat vf_xml
<interface type='hostdev' managed='yes'>
<mac address='52:54:00:00:12:53'/>
<source>
<address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
# cat vf_xml
<interface type='hostdev' managed='yes'>
<mac address='52:54:00:00:12:53'/>
<source>
<address type='pci' domain='0x0000' bus='0x42' slot='0x02' function='0x5'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</interface>
# Source Hypervisor
#!/bin/bash
# Source Hypervisor
#!/bin/bash
DOMAIN=fedora27-tap01
PF=enp66s0f0
VF_NUM=5
TAP_IF=tap01
VF_XML=
DOMAIN=fedora27-tap01
PF=enp66s0f0
VF_NUM=5
TAP_IF=tap01
VF_XML=
MAC=52:54:00:00:12:53
ZERO_MAC=00:00:00:00:00:00
MAC=52:54:00:00:12:53
ZERO_MAC=00:00:00:00:00:00
virsh domif-setlink $DOMAIN $TAP_IF up
bridge fdb del $MAC dev $PF master
virsh detach-device $DOMAIN $VF_XML
ip link set $PF vf $VF_NUM mac $ZERO_MAC
virsh domif-setlink $DOMAIN $TAP_IF up
bridge fdb del $MAC dev $PF master
virsh detach-device $DOMAIN $VF_XML
ip link set $PF vf $VF_NUM mac $ZERO_MAC
virsh migrate --live $DOMAIN qemu+ssh://$REMOTE_HOST/system
virsh migrate --live $DOMAIN qemu+ssh://$REMOTE_HOST/system
# Destination Hypervisor
#!/bin/bash
# Destination Hypervisor
#!/bin/bash
virsh attach-device $DOMAIN $VF_XML
virsh domif-setlink $DOMAIN $TAP_IF down
virsh attach-device $DOMAIN $VF_XML
virsh domif-setlink $DOMAIN $TAP_IF down

View File

@ -0,0 +1,259 @@
.. SPDX-License-Identifier: GPL-2.0
.. _netdev-FAQ:
==========
netdev FAQ
==========
Q: What is netdev?
------------------
A: It is a mailing list for all network-related Linux stuff. This
includes anything found under net/ (i.e. core code like IPv6) and
drivers/net (i.e. hardware specific drivers) in the Linux source tree.
Note that some subsystems (e.g. wireless drivers) which have a high
volume of traffic have their own specific mailing lists.
The netdev list is managed (like many other Linux mailing lists) through
VGER (http://vger.kernel.org/) and archives can be found below:
- http://marc.info/?l=linux-netdev
- http://www.spinics.net/lists/netdev/
Aside from subsystems like that mentioned above, all network-related
Linux development (i.e. RFC, review, comments, etc.) takes place on
netdev.
Q: How do the changes posted to netdev make their way into Linux?
-----------------------------------------------------------------
A: There are always two trees (git repositories) in play. Both are
driven by David Miller, the main network maintainer. There is the
``net`` tree, and the ``net-next`` tree. As you can probably guess from
the names, the ``net`` tree is for fixes to existing code already in the
mainline tree from Linus, and ``net-next`` is where the new code goes
for the future release. You can find the trees here:
- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
Q: How often do changes from these trees make it to the mainline Linus tree?
----------------------------------------------------------------------------
A: To understand this, you need to know a bit of background information on
the cadence of Linux development. Each new release starts off with a
two week "merge window" where the main maintainers feed their new stuff
to Linus for merging into the mainline tree. After the two weeks, the
merge window is closed, and it is called/tagged ``-rc1``. No new
features get mainlined after this -- only fixes to the rc1 content are
expected. After roughly a week of collecting fixes to the rc1 content,
rc2 is released. This repeats on a roughly weekly basis until rc7
(typically; sometimes rc6 if things are quiet, or rc8 if things are in a
state of churn), and a week after the last vX.Y-rcN was done, the
official vX.Y is released.
Relating that to netdev: At the beginning of the 2-week merge window,
the ``net-next`` tree will be closed - no new changes/features. The
accumulated new content of the past ~10 weeks will be passed onto
mainline/Linus via a pull request for vX.Y -- at the same time, the
``net`` tree will start accumulating fixes for this pulled content
relating to vX.Y
An announcement indicating when ``net-next`` has been closed is usually
sent to netdev, but knowing the above, you can predict that in advance.
IMPORTANT: Do not send new ``net-next`` content to netdev during the
period during which ``net-next`` tree is closed.
Shortly after the two weeks have passed (and vX.Y-rc1 is released), the
tree for ``net-next`` reopens to collect content for the next (vX.Y+1)
release.
If you aren't subscribed to netdev and/or are simply unsure if
``net-next`` has re-opened yet, simply check the ``net-next`` git
repository link above for any new networking-related commits. You may
also check the following website for the current status:
http://vger.kernel.org/~davem/net-next.html
The ``net`` tree continues to collect fixes for the vX.Y content, and is
fed back to Linus at regular (~weekly) intervals. Meaning that the
focus for ``net`` is on stabilization and bug fixes.
Finally, the vX.Y gets released, and the whole cycle starts over.
Q: So where are we now in this cycle?
Load the mainline (Linus) page here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
and note the top of the "tags" section. If it is rc1, it is early in
the dev cycle. If it was tagged rc7 a week ago, then a release is
probably imminent.
Q: How do I indicate which tree (net vs. net-next) my patch should be in?
-------------------------------------------------------------------------
A: Firstly, think whether you have a bug fix or new "next-like" content.
Then once decided, assuming that you use git, use the prefix flag, i.e.
::
git format-patch --subject-prefix='PATCH net-next' start..finish
Use ``net`` instead of ``net-next`` (always lower case) in the above for
bug-fix ``net`` content. If you don't use git, then note the only magic
in the above is just the subject text of the outgoing e-mail, and you
can manually change it yourself with whatever MUA you are comfortable
with.
Q: I sent a patch and I'm wondering what happened to it?
--------------------------------------------------------
Q: How can I tell whether it got merged?
A: Start by looking at the main patchworks queue for netdev:
http://patchwork.ozlabs.org/project/netdev/list/
The "State" field will tell you exactly where things are at with your
patch.
Q: The above only says "Under Review". How can I find out more?
----------------------------------------------------------------
A: Generally speaking, the patches get triaged quickly (in less than
48h). So be patient. Asking the maintainer for status updates on your
patch is a good way to ensure your patch is ignored or pushed to the
bottom of the priority list.
Q: I submitted multiple versions of the patch series
----------------------------------------------------
Q: should I directly update patchwork for the previous versions of these
patch series?
A: No, please don't interfere with the patch status on patchwork, leave
it to the maintainer to figure out what is the most recent and current
version that should be applied. If there is any doubt, the maintainer
will reply and ask what should be done.
Q: How can I tell what patches are queued up for backporting to the various stable releases?
--------------------------------------------------------------------------------------------
A: Normally Greg Kroah-Hartman collects stable commits himself, but for
networking, Dave collects up patches he deems critical for the
networking subsystem, and then hands them off to Greg.
There is a patchworks queue that you can see here:
http://patchwork.ozlabs.org/bundle/davem/stable/?state=*
It contains the patches which Dave has selected, but not yet handed off
to Greg. If Greg already has the patch, then it will be here:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
A quick way to find whether the patch is in this stable-queue is to
simply clone the repo, and then git grep the mainline commit ID, e.g.
::
stable-queue$ git grep -l 284041ef21fdf2e
releases/3.0.84/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
releases/3.4.51/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
releases/3.9.8/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
stable/stable-queue$
Q: I see a network patch and I think it should be backported to stable.
-----------------------------------------------------------------------
Q: Should I request it via stable@vger.kernel.org like the references in
the kernel's Documentation/process/stable-kernel-rules.rst file say?
A: No, not for networking. Check the stable queues as per above first
to see if it is already queued. If not, then send a mail to netdev,
listing the upstream commit ID and why you think it should be a stable
candidate.
Before you jump to go do the above, do note that the normal stable rules
in :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
still apply. So you need to explicitly indicate why it is a critical
fix and exactly what users are impacted. In addition, you need to
convince yourself that you *really* think it has been overlooked,
vs. having been considered and rejected.
Generally speaking, the longer it has had a chance to "soak" in
mainline, the better the odds that it is an OK candidate for stable. So
scrambling to request a commit be added the day after it appears should
be avoided.
Q: I have created a network patch and I think it should be backported to stable.
--------------------------------------------------------------------------------
Q: Should I add a Cc: stable@vger.kernel.org like the references in the
kernel's Documentation/ directory say?
A: No. See above answer. In short, if you think it really belongs in
stable, then ensure you write a decent commit log that describes who
gets impacted by the bug fix and how it manifests itself, and when the
bug was introduced. If you do that properly, then the commit will get
handled appropriately and most likely get put in the patchworks stable
queue if it really warrants it.
If you think there is some valid information relating to it being in
stable that does *not* belong in the commit log, then use the three dash
marker line as described in
:ref:`Documentation/process/submitting-patches.rst <the_canonical_patch_format>`
to temporarily embed that information into the patch that you send.
Q: Are all networking bug fixes backported to all stable releases?
------------------------------------------------------------------
A: Due to capacity, Dave could only take care of the backports for the
last two stable releases. For earlier stable releases, each stable
branch maintainer is supposed to take care of them. If you find any
patch is missing from an earlier stable branch, please notify
stable@vger.kernel.org with either a commit ID or a formal patch
backported, and CC Dave and other relevant networking developers.
Q: Is the comment style convention different for the networking content?
------------------------------------------------------------------------
A: Yes, in a largely trivial way. Instead of this::
/*
* foobar blah blah blah
* another line of text
*/
it is requested that you make it look like this::
/* foobar blah blah blah
* another line of text
*/
Q: I am working in existing code that has the former comment style and not the latter.
--------------------------------------------------------------------------------------
Q: Should I submit new code in the former style or the latter?
A: Make it the latter style, so that eventually all code in the domain
of netdev is of this format.
Q: I found a bug that might have possible security implications or similar.
---------------------------------------------------------------------------
Q: Should I mail the main netdev maintainer off-list?**
A: No. The current netdev maintainer has consistently requested that
people use the mailing lists and not reach out directly. If you aren't
OK with that, then perhaps consider mailing security@kernel.org or
reading about http://oss-security.openwall.org/wiki/mailing-lists/distros
as possible alternative mechanisms.
Q: What level of testing is expected before I submit my change?
---------------------------------------------------------------
A: If your changes are against ``net-next``, the expectation is that you
have tested by layering your changes on top of ``net-next``. Ideally
you will have done run-time testing specific to your change, but at a
minimum, your changes should survive an ``allyesconfig`` and an
``allmodconfig`` build without new warnings or failures.
Q: Any other tips to help ensure my net/net-next patch gets OK'd?
-----------------------------------------------------------------
A: Attention to detail. Re-read your own work as if you were the
reviewer. You can start with using ``checkpatch.pl``, perhaps even with
the ``--strict`` flag. But do not be mindlessly robotic in doing so.
If your change is a bug fix, make sure your commit log indicates the
end-user visible symptom, the underlying reason as to why it happens,
and then if necessary, explain why the fix proposed is the best way to
get things done. Don't mangle whitespace, and as is common, don't
mis-indent function arguments that span multiple lines. If it is your
first patch, mail it to yourself so you can test apply it to an
unpatched tree to confirm infrastructure didn't mangle it.
Finally, go back and read
:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
to be sure you are not repeating some common mistake documented there.

View File

@ -1,244 +0,0 @@
Information you need to know about netdev
-----------------------------------------
Q: What is netdev?
A: It is a mailing list for all network-related Linux stuff. This includes
anything found under net/ (i.e. core code like IPv6) and drivers/net
(i.e. hardware specific drivers) in the Linux source tree.
Note that some subsystems (e.g. wireless drivers) which have a high volume
of traffic have their own specific mailing lists.
The netdev list is managed (like many other Linux mailing lists) through
VGER ( http://vger.kernel.org/ ) and archives can be found below:
http://marc.info/?l=linux-netdev
http://www.spinics.net/lists/netdev/
Aside from subsystems like that mentioned above, all network-related Linux
development (i.e. RFC, review, comments, etc.) takes place on netdev.
Q: How do the changes posted to netdev make their way into Linux?
A: There are always two trees (git repositories) in play. Both are driven
by David Miller, the main network maintainer. There is the "net" tree,
and the "net-next" tree. As you can probably guess from the names, the
net tree is for fixes to existing code already in the mainline tree from
Linus, and net-next is where the new code goes for the future release.
You can find the trees here:
https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
Q: How often do changes from these trees make it to the mainline Linus tree?
A: To understand this, you need to know a bit of background information
on the cadence of Linux development. Each new release starts off with
a two week "merge window" where the main maintainers feed their new
stuff to Linus for merging into the mainline tree. After the two weeks,
the merge window is closed, and it is called/tagged "-rc1". No new
features get mainlined after this -- only fixes to the rc1 content
are expected. After roughly a week of collecting fixes to the rc1
content, rc2 is released. This repeats on a roughly weekly basis
until rc7 (typically; sometimes rc6 if things are quiet, or rc8 if
things are in a state of churn), and a week after the last vX.Y-rcN
was done, the official "vX.Y" is released.
Relating that to netdev: At the beginning of the 2-week merge window,
the net-next tree will be closed - no new changes/features. The
accumulated new content of the past ~10 weeks will be passed onto
mainline/Linus via a pull request for vX.Y -- at the same time,
the "net" tree will start accumulating fixes for this pulled content
relating to vX.Y
An announcement indicating when net-next has been closed is usually
sent to netdev, but knowing the above, you can predict that in advance.
IMPORTANT: Do not send new net-next content to netdev during the
period during which net-next tree is closed.
Shortly after the two weeks have passed (and vX.Y-rc1 is released), the
tree for net-next reopens to collect content for the next (vX.Y+1) release.
If you aren't subscribed to netdev and/or are simply unsure if net-next
has re-opened yet, simply check the net-next git repository link above for
any new networking-related commits. You may also check the following
website for the current status:
http://vger.kernel.org/~davem/net-next.html
The "net" tree continues to collect fixes for the vX.Y content, and
is fed back to Linus at regular (~weekly) intervals. Meaning that the
focus for "net" is on stabilization and bugfixes.
Finally, the vX.Y gets released, and the whole cycle starts over.
Q: So where are we now in this cycle?
A: Load the mainline (Linus) page here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
and note the top of the "tags" section. If it is rc1, it is early
in the dev cycle. If it was tagged rc7 a week ago, then a release
is probably imminent.
Q: How do I indicate which tree (net vs. net-next) my patch should be in?
A: Firstly, think whether you have a bug fix or new "next-like" content.
Then once decided, assuming that you use git, use the prefix flag, i.e.
git format-patch --subject-prefix='PATCH net-next' start..finish
Use "net" instead of "net-next" (always lower case) in the above for
bug-fix net content. If you don't use git, then note the only magic in
the above is just the subject text of the outgoing e-mail, and you can
manually change it yourself with whatever MUA you are comfortable with.
Q: I sent a patch and I'm wondering what happened to it. How can I tell
whether it got merged?
A: Start by looking at the main patchworks queue for netdev:
http://patchwork.ozlabs.org/project/netdev/list/
The "State" field will tell you exactly where things are at with
your patch.
Q: The above only says "Under Review". How can I find out more?
A: Generally speaking, the patches get triaged quickly (in less than 48h).
So be patient. Asking the maintainer for status updates on your
patch is a good way to ensure your patch is ignored or pushed to
the bottom of the priority list.
Q: I submitted multiple versions of the patch series, should I directly update
patchwork for the previous versions of these patch series?
A: No, please don't interfere with the patch status on patchwork, leave it to
the maintainer to figure out what is the most recent and current version that
should be applied. If there is any doubt, the maintainer will reply and ask
what should be done.
Q: How can I tell what patches are queued up for backporting to the
various stable releases?
A: Normally Greg Kroah-Hartman collects stable commits himself, but
for networking, Dave collects up patches he deems critical for the
networking subsystem, and then hands them off to Greg.
There is a patchworks queue that you can see here:
http://patchwork.ozlabs.org/bundle/davem/stable/?state=*
It contains the patches which Dave has selected, but not yet handed
off to Greg. If Greg already has the patch, then it will be here:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
A quick way to find whether the patch is in this stable-queue is
to simply clone the repo, and then git grep the mainline commit ID, e.g.
stable-queue$ git grep -l 284041ef21fdf2e
releases/3.0.84/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
releases/3.4.51/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
releases/3.9.8/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
stable/stable-queue$
Q: I see a network patch and I think it should be backported to stable.
Should I request it via "stable@vger.kernel.org" like the references in
the kernel's Documentation/process/stable-kernel-rules.rst file say?
A: No, not for networking. Check the stable queues as per above 1st to see
if it is already queued. If not, then send a mail to netdev, listing
the upstream commit ID and why you think it should be a stable candidate.
Before you jump to go do the above, do note that the normal stable rules
in Documentation/process/stable-kernel-rules.rst still apply. So you need to
explicitly indicate why it is a critical fix and exactly what users are
impacted. In addition, you need to convince yourself that you _really_
think it has been overlooked, vs. having been considered and rejected.
Generally speaking, the longer it has had a chance to "soak" in mainline,
the better the odds that it is an OK candidate for stable. So scrambling
to request a commit be added the day after it appears should be avoided.
Q: I have created a network patch and I think it should be backported to
stable. Should I add a "Cc: stable@vger.kernel.org" like the references
in the kernel's Documentation/ directory say?
A: No. See above answer. In short, if you think it really belongs in
stable, then ensure you write a decent commit log that describes who
gets impacted by the bugfix and how it manifests itself, and when the
bug was introduced. If you do that properly, then the commit will
get handled appropriately and most likely get put in the patchworks
stable queue if it really warrants it.
If you think there is some valid information relating to it being in
stable that does _not_ belong in the commit log, then use the three
dash marker line as described in Documentation/process/submitting-patches.rst to
temporarily embed that information into the patch that you send.
Q: Are all networking bug fixes backported to all stable releases?
A: Due to capacity, Dave could only take care of the backports for the last
2 stable releases. For earlier stable releases, each stable branch maintainer
is supposed to take care of them. If you find any patch is missing from an
earlier stable branch, please notify stable@vger.kernel.org with either a
commit ID or a formal patch backported, and CC Dave and other relevant
networking developers.
Q: Someone said that the comment style and coding convention is different
for the networking content. Is this true?
A: Yes, in a largely trivial way. Instead of this:
/*
* foobar blah blah blah
* another line of text
*/
it is requested that you make it look like this:
/* foobar blah blah blah
* another line of text
*/
Q: I am working in existing code that has the former comment style and not the
latter. Should I submit new code in the former style or the latter?
A: Make it the latter style, so that eventually all code in the domain of
netdev is of this format.
Q: I found a bug that might have possible security implications or similar.
Should I mail the main netdev maintainer off-list?
A: No. The current netdev maintainer has consistently requested that people
use the mailing lists and not reach out directly. If you aren't OK with
that, then perhaps consider mailing "security@kernel.org" or reading about
http://oss-security.openwall.org/wiki/mailing-lists/distros
as possible alternative mechanisms.
Q: What level of testing is expected before I submit my change?
A: If your changes are against net-next, the expectation is that you
have tested by layering your changes on top of net-next. Ideally you
will have done run-time testing specific to your change, but at a
minimum, your changes should survive an "allyesconfig" and an
"allmodconfig" build without new warnings or failures.
Q: Any other tips to help ensure my net/net-next patch gets OK'd?
A: Attention to detail. Re-read your own work as if you were the
reviewer. You can start with using checkpatch.pl, perhaps even
with the "--strict" flag. But do not be mindlessly robotic in
doing so. If your change is a bug-fix, make sure your commit log
indicates the end-user visible symptom, the underlying reason as
to why it happens, and then if necessary, explain why the fix proposed
is the best way to get things done. Don't mangle whitespace, and as
is common, don't mis-indent function arguments that span multiple lines.
If it is your first patch, mail it to yourself so you can test apply
it to an unpatched tree to confirm infrastructure didn't mangle it.
Finally, go back and read Documentation/process/submitting-patches.rst to be
sure you are not repeating some common mistake documented there.

View File

@ -366,8 +366,13 @@ XPS: Transmit Packet Steering
Transmit Packet Steering is a mechanism for intelligently selecting
which transmit queue to use when transmitting a packet on a multi-queue
device. To accomplish this, a mapping from CPU to hardware queue(s) is
recorded. The goal of this mapping is usually to assign queues
device. This can be accomplished by recording two kinds of maps, either
a mapping of CPU to hardware queue(s) or a mapping of receive queue(s)
to hardware transmit queue(s).
1. XPS using CPUs map
The goal of this mapping is usually to assign queues
exclusively to a subset of CPUs, where the transmit completions for
these queues are processed on a CPU within this set. This choice
provides two benefits. First, contention on the device queue lock is
@ -377,15 +382,40 @@ transmit queue). Secondly, cache miss rate on transmit completion is
reduced, in particular for data cache lines that hold the sk_buff
structures.
XPS is configured per transmit queue by setting a bitmap of CPUs that
may use that queue to transmit. The reverse mapping, from CPUs to
transmit queues, is computed and maintained for each network device.
When transmitting the first packet in a flow, the function
get_xps_queue() is called to select a queue. This function uses the ID
of the running CPU as a key into the CPU-to-queue lookup table. If the
2. XPS using receive queues map
This mapping is used to pick transmit queue based on the receive
queue(s) map configuration set by the administrator. A set of receive
queues can be mapped to a set of transmit queues (many:many), although
the common use case is a 1:1 mapping. This will enable sending packets
on the same queue associations for transmit and receive. This is useful for
busy polling multi-threaded workloads where there are challenges in
associating a given CPU to a given application thread. The application
threads are not pinned to CPUs and each thread handles packets
received on a single queue. The receive queue number is cached in the
socket for the connection. In this model, sending the packets on the same
transmit queue corresponding to the associated receive queue has benefits
in keeping the CPU overhead low. Transmit completion work is locked into
the same queue-association that a given application is polling on. This
avoids the overhead of triggering an interrupt on another CPU. When the
application cleans up the packets during the busy poll, transmit completion
may be processed along with it in the same thread context and so result in
reduced latency.
XPS is configured per transmit queue by setting a bitmap of
CPUs/receive-queues that may use that queue to transmit. The reverse
mapping, from CPUs to transmit queues or from receive-queues to transmit
queues, is computed and maintained for each network device. When
transmitting the first packet in a flow, the function get_xps_queue() is
called to select a queue. This function uses the ID of the receive queue
for the socket connection for a match in the receive queue-to-transmit queue
lookup table. Alternatively, this function can also use the ID of the
running CPU as a key into the CPU-to-queue lookup table. If the
ID matches a single queue, that is used for transmission. If multiple
queues match, one is selected by using the flow hash to compute an index
into the set.
into the set. When selecting the transmit queue based on receive queue(s)
map, the transmit device is not validated against the receive device as it
requires expensive lookup operation in the datapath.
The queue chosen for transmitting a particular flow is saved in the
corresponding socket structure for the flow (e.g. a TCP connection).
@ -404,11 +434,15 @@ acknowledged.
XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by
default for SMP). The functionality remains disabled until explicitly
configured. To enable XPS, the bitmap of CPUs that may use a transmit
queue is configured using the sysfs file entry:
configured. To enable XPS, the bitmap of CPUs/receive-queues that may
use a transmit queue is configured using the sysfs file entry:
For selection based on CPUs map:
/sys/class/net/<dev>/queues/tx-<n>/xps_cpus
For selection based on receive-queues map:
/sys/class/net/<dev>/queues/tx-<n>/xps_rxqs
== Suggested Configuration
For a network device with a single transmission queue, XPS configuration
@ -421,6 +455,11 @@ best CPUs to share a given queue are probably those that share the cache
with the CPU that processes transmit completions for that queue
(transmit interrupts).
For transmit queue selection based on receive queue(s), XPS has to be
explicitly configured mapping receive-queue(s) to transmit queue(s). If the
user configuration for receive-queue map does not apply, then the transmit
queue is selected based on the CPUs map.
Per TX Queue rate limitation:
=============================

View File

@ -0,0 +1,540 @@
* Texas Instruments CPSW ethernet driver
Multiqueue & CBS & MQPRIO
=====================================================================
=====================================================================
The cpsw has 3 CBS shapers for each external ports. This document
describes MQPRIO and CBS Qdisc offload configuration for cpsw driver
based on examples. It potentially can be used in audio video bridging
(AVB) and time sensitive networking (TSN).
The following examples were tested on AM572x EVM and BBB boards.
Test setup
==========
Under consideration two examples with AM572x EVM running cpsw driver
in dual_emac mode.
Several prerequisites:
- TX queues must be rated starting from txq0 that has highest priority
- Traffic classes are used starting from 0, that has highest priority
- CBS shapers should be used with rated queues
- The bandwidth for CBS shapers has to be set a little bit more then
potential incoming rate, thus, rate of all incoming tx queues has
to be a little less
- Real rates can differ, due to discreetness
- Map skb-priority to txq is not enough, also skb-priority to l2 prio
map has to be created with ip or vconfig tool
- Any l2/socket prio (0 - 7) for classes can be used, but for
simplicity default values are used: 3 and 2
- only 2 classes tested: A and B, but checked and can work with more,
maximum allowed 4, but only for 3 rate can be set.
Test setup for examples
=======================
+-------------------------------+
|--+ |
| | Workstation0 |
|E | MAC 18:03:73:66:87:42 |
+-----------------------------+ +--|t | |
| | 1 | E | | |h |./tsn_listener -d \ |
| Target board: | 0 | t |--+ |0 | 18:03:73:66:87:42 -i eth0 \|
| AM572x EVM | 0 | h | | | -s 1500 |
| | 0 | 0 | |--+ |
| Only 2 classes: |Mb +---| +-------------------------------+
| class A, class B | |
| | +---| +-------------------------------+
| | 1 | E | |--+ |
| | 0 | t | | | Workstation1 |
| | 0 | h |--+ |E | MAC 20:cf:30:85:7d:fd |
| |Mb | 1 | +--|t | |
+-----------------------------+ |h |./tsn_listener -d \ |
|0 | 20:cf:30:85:7d:fd -i eth0 \|
| | -s 1500 |
|--+ |
+-------------------------------+
*********************************************************************
*********************************************************************
*********************************************************************
Example 1: One port tx AVB configuration scheme for target board
----------------------------------------------------------------------
(prints and scheme for AM572x evm, applicable for single port boards)
tc - traffic class
txq - transmit queue
p - priority
f - fifo (cpsw fifo)
S - shaper configured
+------------------------------------------------------------------+ u
| +---------------+ +---------------+ +------+ +------+ | s
| | | | | | | | | | e
| | App 1 | | App 2 | | Apps | | Apps | | r
| | Class A | | Class B | | Rest | | Rest | |
| | Eth0 | | Eth0 | | Eth0 | | Eth1 | | s
| | VLAN100 | | VLAN100 | | | | | | | | p
| | 40 Mb/s | | 20 Mb/s | | | | | | | | a
| | SO_PRIORITY=3 | | SO_PRIORITY=2 | | | | | | | | c
| | | | | | | | | | | | | | e
| +---|-----------+ +---|-----------+ +---|--+ +---|--+ |
+-----|------------------|------------------|--------|-------------+
+-+ +------------+ | |
| | +-----------------+ +--+
| | | |
+---|-------|-------------|-----------------------|----------------+
| +----+ +----+ +----+ +----+ +----+ |
| | p3 | | p2 | | p1 | | p0 | | p0 | | k
| \ / \ / \ / \ / \ / | e
| \ / \ / \ / \ / \ / | r
| \/ \/ \/ \/ \/ | n
| | | | | | e
| | | +-----+ | | l
| | | | | |
| +----+ +----+ +----+ +----+ | s
| |tc0 | |tc1 | |tc2 | |tc0 | | p
| \ / \ / \ / \ / | a
| \ / \ / \ / \ / | c
| \/ \/ \/ \/ | e
| | | +-----+ | |
| | | | | | |
| | | | | | |
| | | | | | |
| +----+ +----+ +----+ +----+ +----+ |
| |txq0| |txq1| |txq2| |txq3| |txq4| |
| \ / \ / \ / \ / \ / |
| \ / \ / \ / \ / \ / |
| \/ \/ \/ \/ \/ |
| +-|------|------|------|--+ +--|--------------+ |
| | | | | | | Eth0.100 | | Eth1 | |
+---|------|------|------|------------------------|----------------+
| | | | |
p p p p |
3 2 0-1, 4-7 <- L2 priority |
| | | | |
| | | | |
+---|------|------|------|------------------------|----------------+
| | | | | |----------+ |
| +----+ +----+ +----+ +----+ +----+ |
| |dma7| |dma6| |dma5| |dma4| |dma3| |
| \ / \ / \ / \ / \ / | c
| \S / \S / \ / \ / \ / | p
| \/ \/ \/ \/ \/ | s
| | | | +----- | | w
| | | | | | |
| | | | | | | d
| +----+ +----+ +----+p p+----+ | r
| | | | | | |o o| | | i
| | f3 | | f2 | | f0 |r r| f0 | | v
| |tc0 | |tc1 | |tc2 |t t|tc0 | | e
| \CBS / \CBS / \CBS /1 2\CBS / | r
| \S / \S / \ / \ / |
| \/ \/ \/ \/ |
+------------------------------------------------------------------+
========================================Eth==========================>
1)
// Add 4 tx queues, for interface Eth0, and 1 tx queue for Eth1
$ ethtool -L eth0 rx 1 tx 5
rx unmodified, ignoring
2)
// Check if num of queues is set correctly:
$ ethtool -l eth0
Channel parameters for eth0:
Pre-set maximums:
RX: 8
TX: 8
Other: 0
Combined: 0
Current hardware settings:
RX: 1
TX: 5
Other: 0
Combined: 0
3)
// TX queues must be rated starting from 0, so set bws for tx0 and tx1
// Set rates 40 and 20 Mb/s appropriately.
// Pay attention, real speed can differ a bit due to discreetness.
// Leave last 2 tx queues not rated.
$ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
$ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
4)
// Check maximum rate of tx (cpdma) queues:
$ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
40
20
0
0
0
5)
// Map skb->priority to traffic class:
// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2
// Map traffic class to transmit queue:
// tc0 -> txq0, tc1 -> txq1, tc2 -> (txq2, txq3)
$ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1
5a)
// As two interface sharing same set of tx queues, assign all traffic
// coming to interface Eth1 to separate queue in order to not mix it
// with traffic from interface Eth0, so use separate txq to send
// packets to Eth1, so all prio -> tc0 and tc0 -> txq4
// Here hw 0, so here still default configuration for eth1 in hw
$ tc qdisc replace dev eth1 handle 100: parent root mqprio num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@4 hw 0
6)
// Check classes settings
$ tc -g class show dev eth0
+---(100:ffe2) mqprio
| +---(100:3) mqprio
| +---(100:4) mqprio
|
+---(100:ffe1) mqprio
| +---(100:2) mqprio
|
+---(100:ffe0) mqprio
+---(100:1) mqprio
$ tc -g class show dev eth1
+---(100:ffe0) mqprio
+---(100:5) mqprio
7)
// Set rate for class A - 41 Mbit (tc0, txq0) using CBS Qdisc
// Set it +1 Mb for reserve (important!)
// here only idle slope is important, others arg are ignored
// Pay attention, real speed can differ a bit due to discreetness
$ tc qdisc add dev eth0 parent 100:1 cbs locredit -1438 \
hicredit 62 sendslope -959000 idleslope 41000 offload 1
net eth0: set FIFO3 bw = 50
8)
// Set rate for class B - 21 Mbit (tc1, txq1) using CBS Qdisc:
// Set it +1 Mb for reserve (important!)
$ tc qdisc add dev eth0 parent 100:2 cbs locredit -1468 \
hicredit 65 sendslope -979000 idleslope 21000 offload 1
net eth0: set FIFO2 bw = 30
9)
// Create vlan 100 to map sk->priority to vlan qos
$ ip link add link eth0 name eth0.100 type vlan id 100
8021q: 802.1Q VLAN Support v1.8
8021q: adding VLAN 0 to HW filter on device eth0
8021q: adding VLAN 0 to HW filter on device eth1
net eth0: Adding vlanid 100 to vlan filter
10)
// Map skb->priority to L2 prio, 1 to 1
$ ip link set eth0.100 type vlan \
egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
11)
// Check egress map for vlan 100
$ cat /proc/net/vlan/eth0.100
[...]
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
12)
// Run your appropriate tools with socket option "SO_PRIORITY"
// to 3 for class A and/or to 2 for class B
// (I took at https://www.spinics.net/lists/netdev/msg460869.html)
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p3 -s 1500&
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p2 -s 1500&
13)
// run your listener on workstation (should be in same vlan)
// (I took at https://www.spinics.net/lists/netdev/msg460869.html)
./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39000 kbps
14)
// Restore default configuration if needed
$ ip link del eth0.100
$ tc qdisc del dev eth1 root
$ tc qdisc del dev eth0 root
net eth0: Prev FIFO2 is shaped
net eth0: set FIFO3 bw = 0
net eth0: set FIFO2 bw = 0
$ ethtool -L eth0 rx 1 tx 1
*********************************************************************
*********************************************************************
*********************************************************************
Example 2: Two port tx AVB configuration scheme for target board
----------------------------------------------------------------------
(prints and scheme for AM572x evm, for dual emac boards only)
+------------------------------------------------------------------+ u
| +----------+ +----------+ +------+ +----------+ +----------+ | s
| | | | | | | | | | | | e
| | App 1 | | App 2 | | Apps | | App 3 | | App 4 | | r
| | Class A | | Class B | | Rest | | Class B | | Class A | |
| | Eth0 | | Eth0 | | | | | Eth1 | | Eth1 | | s
| | VLAN100 | | VLAN100 | | | | | VLAN100 | | VLAN100 | | p
| | 40 Mb/s | | 20 Mb/s | | | | | 10 Mb/s | | 30 Mb/s | | a
| | SO_PRI=3 | | SO_PRI=2 | | | | | SO_PRI=3 | | SO_PRI=2 | | c
| | | | | | | | | | | | | | | | | e
| +---|------+ +---|------+ +---|--+ +---|------+ +---|------+ |
+-----|-------------|-------------|---------|-------------|--------+
+-+ +-------+ | +----------+ +----+
| | +-------+------+ | |
| | | | | |
+---|-------|-------------|--------------|-------------|-------|---+
| +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ |
| | p3 | | p2 | | p1 | | p0 | | p0 | | p1 | | p2 | | p3 | | k
| \ / \ / \ / \ / \ / \ / \ / \ / | e
| \ / \ / \ / \ / \ / \ / \ / \ / | r
| \/ \/ \/ \/ \/ \/ \/ \/ | n
| | | | | | | | e
| | | +----+ +----+ | | | l
| | | | | | | |
| +----+ +----+ +----+ +----+ +----+ +----+ | s
| |tc0 | |tc1 | |tc2 | |tc2 | |tc1 | |tc0 | | p
| \ / \ / \ / \ / \ / \ / | a
| \ / \ / \ / \ / \ / \ / | c
| \/ \/ \/ \/ \/ \/ | e
| | | +-----+ +-----+ | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | E E | | | | |
| +----+ +----+ +----+ +----+ t t +----+ +----+ +----+ +----+ |
| |txq0| |txq1| |txq4| |txq5| h h |txq6| |txq7| |txq3| |txq2| |
| \ / \ / \ / \ / 0 1 \ / \ / \ / \ / |
| \ / \ / \ / \ / . . \ / \ / \ / \ / |
| \/ \/ \/ \/ 1 1 \/ \/ \/ \/ |
| +-|------|------|------|--+ 0 0 +-|------|------|------|--+ |
| | | | | | | 0 0 | | | | | | |
+---|------|------|------|---------------|------|------|------|----+
| | | | | | | |
p p p p p p p p
3 2 0-1, 4-7 <-L2 pri-> 0-1, 4-7 2 3
| | | | | | | |
| | | | | | | |
+---|------|------|------|---------------|------|------|------|----+
| | | | | | | | | |
| +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ |
| |dma7| |dma6| |dma3| |dma2| |dma1| |dma0| |dma4| |dma5| |
| \ / \ / \ / \ / \ / \ / \ / \ / | c
| \S / \S / \ / \ / \ / \ / \S / \S / | p
| \/ \/ \/ \/ \/ \/ \/ \/ | s
| | | | +----- | | | | | w
| | | | | +----+ | | | |
| | | | | | | | | | d
| +----+ +----+ +----+p p+----+ +----+ +----+ | r
| | | | | | |o o| | | | | | | i
| | f3 | | f2 | | f0 |r CPSW r| f3 | | f2 | | f0 | | v
| |tc0 | |tc1 | |tc2 |t t|tc0 | |tc1 | |tc2 | | e
| \CBS / \CBS / \CBS /1 2\CBS / \CBS / \CBS / | r
| \S / \S / \ / \S / \S / \ / |
| \/ \/ \/ \/ \/ \/ |
+------------------------------------------------------------------+
========================================Eth==========================>
1)
// Add 8 tx queues, for interface Eth0, but they are common, so are accessed
// by two interfaces Eth0 and Eth1.
$ ethtool -L eth1 rx 1 tx 8
rx unmodified, ignoring
2)
// Check if num of queues is set correctly:
$ ethtool -l eth0
Channel parameters for eth0:
Pre-set maximums:
RX: 8
TX: 8
Other: 0
Combined: 0
Current hardware settings:
RX: 1
TX: 8
Other: 0
Combined: 0
3)
// TX queues must be rated starting from 0, so set bws for tx0 and tx1 for Eth0
// and for tx2 and tx3 for Eth1. That is, rates 40 and 20 Mb/s appropriately
// for Eth0 and 30 and 10 Mb/s for Eth1.
// Real speed can differ a bit due to discreetness
// Leave last 4 tx queues as not rated
$ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
$ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
$ echo 30 > /sys/class/net/eth1/queues/tx-2/tx_maxrate
$ echo 10 > /sys/class/net/eth1/queues/tx-3/tx_maxrate
4)
// Check maximum rate of tx (cpdma) queues:
$ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
40
20
30
10
0
0
0
0
5)
// Map skb->priority to traffic class for Eth0:
// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2
// Map traffic class to transmit queue:
// tc0 -> txq0, tc1 -> txq1, tc2 -> (txq4, txq5)
$ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@4 hw 1
6)
// Check classes settings
$ tc -g class show dev eth0
+---(100:ffe2) mqprio
| +---(100:5) mqprio
| +---(100:6) mqprio
|
+---(100:ffe1) mqprio
| +---(100:2) mqprio
|
+---(100:ffe0) mqprio
+---(100:1) mqprio
7)
// Set rate for class A - 41 Mbit (tc0, txq0) using CBS Qdisc for Eth0
// here only idle slope is important, others ignored
// Real speed can differ a bit due to discreetness
$ tc qdisc add dev eth0 parent 100:1 cbs locredit -1470 \
hicredit 62 sendslope -959000 idleslope 41000 offload 1
net eth0: set FIFO3 bw = 50
8)
// Set rate for class B - 21 Mbit (tc1, txq1) using CBS Qdisc for Eth0
$ tc qdisc add dev eth0 parent 100:2 cbs locredit -1470 \
hicredit 65 sendslope -979000 idleslope 21000 offload 1
net eth0: set FIFO2 bw = 30
9)
// Create vlan 100 to map sk->priority to vlan qos for Eth0
$ ip link add link eth0 name eth0.100 type vlan id 100
net eth0: Adding vlanid 100 to vlan filter
10)
// Map skb->priority to L2 prio for Eth0.100, one to one
$ ip link set eth0.100 type vlan \
egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
11)
// Check egress map for vlan 100
$ cat /proc/net/vlan/eth0.100
[...]
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
12)
// Map skb->priority to traffic class for Eth1:
// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2
// Map traffic class to transmit queue:
// tc0 -> txq2, tc1 -> txq3, tc2 -> (txq6, txq7)
$ tc qdisc replace dev eth1 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@2 1@3 2@6 hw 1
13)
// Check classes settings
$ tc -g class show dev eth1
+---(100:ffe2) mqprio
| +---(100:7) mqprio
| +---(100:8) mqprio
|
+---(100:ffe1) mqprio
| +---(100:4) mqprio
|
+---(100:ffe0) mqprio
+---(100:3) mqprio
14)
// Set rate for class A - 31 Mbit (tc0, txq2) using CBS Qdisc for Eth1
// here only idle slope is important, others ignored
// Set it +1 Mb for reserve (important!)
$ tc qdisc add dev eth1 parent 100:3 cbs locredit -1453 \
hicredit 47 sendslope -969000 idleslope 31000 offload 1
net eth1: set FIFO3 bw = 31
15)
// Set rate for class B - 11 Mbit (tc1, txq3) using CBS Qdisc for Eth1
// Set it +1 Mb for reserve (important!)
$ tc qdisc add dev eth1 parent 100:4 cbs locredit -1483 \
hicredit 34 sendslope -989000 idleslope 11000 offload 1
net eth1: set FIFO2 bw = 11
16)
// Create vlan 100 to map sk->priority to vlan qos for Eth1
$ ip link add link eth1 name eth1.100 type vlan id 100
net eth1: Adding vlanid 100 to vlan filter
17)
// Map skb->priority to L2 prio for Eth1.100, one to one
$ ip link set eth1.100 type vlan \
egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
18)
// Check egress map for vlan 100
$ cat /proc/net/vlan/eth1.100
[...]
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
19)
// Run appropriate tools with socket option "SO_PRIORITY" to 3
// for class A and to 2 for class B. For both interfaces
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p2 -s 1500&
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p3 -s 1500&
./tsn_talker -d 20:cf:30:85:7d:fd -i eth1.100 -p2 -s 1500&
./tsn_talker -d 20:cf:30:85:7d:fd -i eth1.100 -p3 -s 1500&
20)
// run your listener on workstation (should be in same vlan)
// (I took at https://www.spinics.net/lists/netdev/msg460869.html)
./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39000 kbps
21)
// Restore default configuration if needed
$ ip link del eth1.100
$ ip link del eth0.100
$ tc qdisc del dev eth1 root
net eth1: Prev FIFO2 is shaped
net eth1: set FIFO3 bw = 0
net eth1: set FIFO2 bw = 0
$ tc qdisc del dev eth0 root
net eth0: Prev FIFO2 is shaped
net eth0: set FIFO3 bw = 0
net eth0: set FIFO2 bw = 0
$ ethtool -L eth0 rx 1 tx 1

View File

@ -37,7 +37,7 @@ Procedure for submitting patches to the -stable tree
- If the patch covers files in net/ or drivers/net please follow netdev stable
submission guidelines as described in
Documentation/networking/netdev-FAQ.txt
:ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
- Security patches should not be handled (solely) by the -stable review
process but should follow the procedures in
:ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`.

View File

@ -611,6 +611,7 @@ which stable kernel versions should receive your fix. This is the preferred
method for indicating a bug fixed by the patch. See :ref:`describe_changes`
for more details.
.. _the_canonical_patch_format:
14) The canonical patch format
------------------------------

View File

@ -9,7 +9,7 @@ rfkill - RF kill switch support
Introduction
============
The rfkill subsystem provides a generic interface to disabling any radio
The rfkill subsystem provides a generic interface for disabling any radio
transmitter in the system. When a transmitter is blocked, it shall not
radiate any power.
@ -45,7 +45,7 @@ The rfkill subsystem is composed of three main components:
* the rfkill drivers.
The rfkill core provides API for kernel drivers to register their radio
transmitter with the kernel, methods for turning it on and off and, letting
transmitter with the kernel, methods for turning it on and off, and letting
the system know about hardware-disabled states that may be implemented on
the device.
@ -54,7 +54,7 @@ ways for userspace to query the current states. See the "Userspace support"
section below.
When the device is hard-blocked (either by a call to rfkill_set_hw_state()
or from query_hw_block) set_block() will be invoked for additional software
or from query_hw_block), set_block() will be invoked for additional software
block, but drivers can ignore the method call since they can use the return
value of the function rfkill_set_hw_state() to sync the software state
instead of keeping track of calls to set_block(). In fact, drivers should
@ -65,7 +65,6 @@ keeps track of soft and hard block separately.
Kernel API
==========
Drivers for radio transmitters normally implement an rfkill driver.
Platform drivers might implement input devices if the rfkill button is just
@ -75,14 +74,14 @@ a way to turn on/off the transmitter(s).
For some platforms, it is possible that the hardware state changes during
suspend/hibernation, in which case it will be necessary to update the rfkill
core with the current state is at resume time.
core with the current state at resume time.
To create an rfkill driver, driver's Kconfig needs to have::
depends on RFKILL || !RFKILL
to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL
case allows the driver to be built when rfkill is not configured, which
case allows the driver to be built when rfkill is not configured, in which
case all rfkill API can still be used but will be provided by static inlines
which compile to almost nothing.
@ -91,7 +90,7 @@ rfkill drivers that control devices that can be hard-blocked unless they also
assign the poll_hw_block() callback (then the rfkill core will poll the
device). Don't do this unless you cannot get the event in any other way.
RFKill provides per-switch LED triggers, which can be used to drive LEDs
rfkill provides per-switch LED triggers, which can be used to drive LEDs
according to the switch state (LED_FULL when blocked, LED_OFF otherwise).
@ -114,7 +113,7 @@ a specified type) into a state which also updates the default state for
hotplugged devices.
After an application opens /dev/rfkill, it can read the current state of all
devices. Changes can be either obtained by either polling the descriptor for
devices. Changes can be obtained by either polling the descriptor for
hotplug or state change events or by listening for uevents emitted by the
rfkill core framework.
@ -127,8 +126,7 @@ environment variables set::
RFKILL_STATE
RFKILL_TYPE
The contents of these variables corresponds to the "name", "state" and
The content of these variables corresponds to the "name", "state" and
"type" sysfs files explained above.
For further details consult Documentation/ABI/stable/sysfs-class-rfkill.

View File

@ -9002,6 +9002,14 @@ F: include/uapi/linux/meye.h
F: include/uapi/linux/ivtv*
F: include/uapi/linux/uvcvideo.h
MEDIATEK BLUETOOTH DRIVER
M: Sean Wang <sean.wang@mediatek.com>
L: linux-bluetooth@vger.kernel.org
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
F: drivers/bluetooth/btmtkuart.c
MEDIATEK CIR DRIVER
M: Sean Wang <sean.wang@mediatek.com>
S: Maintained
@ -9174,6 +9182,7 @@ S: Supported
W: http://www.mellanox.com
Q: http://patchwork.ozlabs.org/project/netdev/list/
F: drivers/net/ethernet/mellanox/mlxsw/
F: tools/testing/selftests/drivers/net/mlxsw/
MELLANOX FIRMWARE FLASH LIBRARY (mlxfw)
M: mlxsw@mellanox.com
@ -12079,6 +12088,13 @@ S: Maintained
F: sound/soc/codecs/rt*
F: include/sound/rt*.h
REALTEK RTL83xx SMI DSA ROUTER CHIPS
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
F: drivers/net/dsa/realtek-smi*
F: drivers/net/dsa/rtl83*
REGISTER MAP ABSTRACTION
M: Mark Brown <broonie@kernel.org>
L: linux-kernel@vger.kernel.org
@ -12186,6 +12202,8 @@ S: Maintained
F: Documentation/rfkill.txt
F: Documentation/ABI/stable/sysfs-class-rfkill
F: net/rfkill/
F: include/linux/rfkill.h
F: include/uapi/linux/rfkill.h
RHASHTABLE
M: Thomas Graf <tgraf@suug.ch>
@ -12193,7 +12211,9 @@ M: Herbert Xu <herbert@gondor.apana.org.au>
L: netdev@vger.kernel.org
S: Maintained
F: lib/rhashtable.c
F: lib/test_rhashtable.c
F: include/linux/rhashtable.h
F: include/linux/rhashtable-types.h
RICOH R5C592 MEMORYSTICK DRIVER
M: Maxim Levitsky <maximlevitsky@gmail.com>

View File

@ -112,4 +112,7 @@
#define SO_ZEROCOPY 60
#define SO_TXTIME 61
#define SCM_TXTIME SO_TXTIME
#endif /* _UAPI_ASM_SOCKET_H */

View File

@ -156,6 +156,100 @@
};
};
/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
switch {
compatible = "realtek,rtl8366rb";
/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
realtek,disable-leds;
switch_intc: interrupt-controller {
/* GPIO 15 provides the interrupt */
interrupt-parent = <&gpio0>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan0";
phy-handle = <&phy0>;
};
port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&phy1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&phy2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-handle = <&phy3>;
};
port@4 {
reg = <4>;
label = "wan";
phy-handle = <&phy4>;
};
rtl8366rb_cpu_port: port@5 {
reg = <5>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
mdio {
compatible = "realtek,smi-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@0 {
reg = <0>;
interrupt-parent = <&switch_intc>;
interrupts = <0>;
};
phy1: phy@1 {
reg = <1>;
interrupt-parent = <&switch_intc>;
interrupts = <1>;
};
phy2: phy@2 {
reg = <2>;
interrupt-parent = <&switch_intc>;
interrupts = <2>;
};
phy3: phy@3 {
reg = <3>;
interrupt-parent = <&switch_intc>;
interrupts = <3>;
};
phy4: phy@4 {
reg = <4>;
interrupt-parent = <&switch_intc>;
interrupts = <12>;
};
};
};
soc {
flash@30000000 {
/*
@ -223,10 +317,12 @@
* gpio0bgrp cover line 7 used by WPS LED
* gpio0cgrp cover line 8, 13 used by keys
* and 11, 12 used by the HD LEDs
* and line 14, 15 used by RTL8366
* RESET and phy ready
* gpio0egrp cover line 16 used by VDISP
* gpio0fgrp cover line 17 used by TK IRQ
* gpio0ggrp cover line 20 used by panel CS
* gpio0hgrp cover line 21,22 used by RTL8366RB
* gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
*/
gpio0_default_pins: pinctrl-gpio0 {
mux {
@ -250,6 +346,32 @@
groups = "gpio1bgrp";
};
};
pinctrl-gmii {
mux {
function = "gmii";
groups = "gmii_gmac0_grp";
};
conf0 {
pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
"Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
"T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
"U8 GMAC0 TXC", "V11 GMAC1 TXC",
"W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
"Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
"T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
"V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
"Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
"T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
"U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
"W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
skew-delay = <7>;
};
/* Set up drive strength on GMAC0 to 16 mA */
conf1 {
groups = "gmii_gmac0_grp";
drive-strength = <16>;
};
};
};
};
@ -291,6 +413,22 @@
<0x6000 0 0 4 &pci_intc 2>;
};
ethernet@60000000 {
status = "okay";
ethernet-port@0 {
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
ethernet-port@1 {
/* Not used in this platform */
};
};
ata@63000000 {
status = "okay";
};

File diff suppressed because it is too large Load Diff

View File

@ -77,11 +77,14 @@
#define ARM_INST_EOR_R 0x00200000
#define ARM_INST_EOR_I 0x02200000
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDST__U 0x00800000
#define ARM_INST_LDST__IMM12 0x00000fff
#define ARM_INST_LDRB_I 0x05500000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
#define ARM_INST_LDRD_I 0x014000d0
#define ARM_INST_LDRH_I 0x015000b0
#define ARM_INST_LDRH_R 0x019000b0
#define ARM_INST_LDR_I 0x05900000
#define ARM_INST_LDR_I 0x05100000
#define ARM_INST_LDR_R 0x07900000
#define ARM_INST_LDM 0x08900000
@ -124,9 +127,10 @@
#define ARM_INST_SBC_R 0x00c00000
#define ARM_INST_SBCS_R 0x00d00000
#define ARM_INST_STR_I 0x05800000
#define ARM_INST_STRB_I 0x05c00000
#define ARM_INST_STRH_I 0x01c000b0
#define ARM_INST_STR_I 0x05000000
#define ARM_INST_STRB_I 0x05400000
#define ARM_INST_STRD_I 0x014000f0
#define ARM_INST_STRH_I 0x014000b0
#define ARM_INST_TST_R 0x01100000
#define ARM_INST_TST_I 0x03100000
@ -183,17 +187,18 @@
#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
#define ARM_EOR_I(rd, rn, imm) _AL3_I(ARM_INST_EOR, rd, rn, imm)
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| ((off) & 0xfff))
#define ARM_LDR_R(rt, rn, rm) (ARM_INST_LDR_R | (rt) << 12 | (rn) << 16 \
#define ARM_LDR_R(rt, rn, rm) (ARM_INST_LDR_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (rm))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_R(rt, rn, rm) (ARM_INST_LDRB_R | (rt) << 12 | (rn) << 16 \
#define ARM_LDR_R_SI(rt, rn, rm, type, imm) \
(ARM_INST_LDR_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (imm) << 7 | (type) << 5 | (rm))
#define ARM_LDRB_R(rt, rn, rm) (ARM_INST_LDRB_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (rm))
#define ARM_LDRH_I(rt, rn, off) (ARM_INST_LDRH_I | (rt) << 12 | (rn) << 16 \
| (((off) & 0xf0) << 4) | ((off) & 0xf))
#define ARM_LDRH_R(rt, rn, rm) (ARM_INST_LDRH_R | (rt) << 12 | (rn) << 16 \
#define ARM_LDRH_R(rt, rn, rm) (ARM_INST_LDRH_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (rm))
#define ARM_LDM(rn, regs) (ARM_INST_LDM | (rn) << 16 | (regs))
@ -254,13 +259,6 @@
#define ARM_SUBS_I(rd, rn, imm) _AL3_I(ARM_INST_SUBS, rd, rn, imm)
#define ARM_SBC_I(rd, rn, imm) _AL3_I(ARM_INST_SBC, rd, rn, imm)
#define ARM_STR_I(rt, rn, off) (ARM_INST_STR_I | (rt) << 12 | (rn) << 16 \
| ((off) & 0xfff))
#define ARM_STRH_I(rt, rn, off) (ARM_INST_STRH_I | (rt) << 12 | (rn) << 16 \
| (((off) & 0xf0) << 4) | ((off) & 0xf))
#define ARM_STRB_I(rt, rn, off) (ARM_INST_STRB_I | (rt) << 12 | (rn) << 16 \
| (((off) & 0xf0) << 4) | ((off) & 0xf))
#define ARM_TST_R(rn, rm) _AL3_R(ARM_INST_TST, 0, rn, rm)
#define ARM_TST_I(rn, imm) _AL3_I(ARM_INST_TST, 0, rn, imm)

View File

@ -482,9 +482,9 @@
status = "disabled";
};
mdio_mux_iproc: mdio-mux@6602023c {
mdio_mux_iproc: mdio-mux@66020000 {
compatible = "brcm,mdio-mux-iproc";
reg = <0x6602023c 0x14>;
reg = <0x66020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;

View File

@ -278,9 +278,9 @@
#include "stingray-pinctrl.dtsi"
mdio_mux_iproc: mdio-mux@2023c {
mdio_mux_iproc: mdio-mux@20000 {
compatible = "brcm,mdio-mux-iproc";
reg = <0x0002023c 0x14>;
reg = <0x00020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;

View File

@ -11,13 +11,14 @@ fman0: fman@1a00000 {
#size-cells = <1>;
cell-index = <0>;
compatible = "fsl,fman";
ranges = <0x0 0x0 0x1a00000 0x100000>;
reg = <0x0 0x1a00000 0x0 0x100000>;
ranges = <0x0 0x0 0x1a00000 0xfe000>;
reg = <0x0 0x1a00000 0x0 0xfe000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 3 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
muram@0 {
compatible = "fsl,fman-muram";
@ -73,9 +74,11 @@ fman0: fman@1a00000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfd000 0x1000>;
};
ptp_timer0: ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
};
ptp_timer0: ptp-timer@1afe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x0 0x1afe000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 3 0>;
};

View File

@ -114,4 +114,7 @@
#define SO_ZEROCOPY 60
#define SO_TXTIME 61
#define SCM_TXTIME SO_TXTIME
#endif /* _ASM_IA64_SOCKET_H */

View File

@ -66,7 +66,6 @@ CONFIG_HW_RANDOM=y
CONFIG_GPIO_SYSFS=y
CONFIG_WATCHDOG=y
CONFIG_BCM47XX_WDT=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_USB=y

View File

@ -123,4 +123,7 @@
#define SO_ZEROCOPY 60
#define SO_TXTIME 61
#define SCM_TXTIME SO_TXTIME
#endif /* _UAPI_ASM_SOCKET_H */

View File

@ -104,4 +104,7 @@
#define SO_ZEROCOPY 0x4035
#define SO_TXTIME 0x4036
#define SCM_TXTIME SO_TXTIME
#endif /* _UAPI_ASM_SOCKET_H */

View File

@ -37,12 +37,13 @@ fman0: fman@400000 {
#size-cells = <1>;
cell-index = <0>;
compatible = "fsl,fman";
ranges = <0 0x400000 0x100000>;
reg = <0x400000 0x100000>;
ranges = <0 0x400000 0xfe000>;
reg = <0x400000 0xfe000>;
interrupts = <96 2 0 0>, <16 2 1 1>;
clocks = <&clockgen 3 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x40 0xc>;
ptimer-handle = <&ptp_timer0>;
muram@0 {
compatible = "fsl,fman-muram";
@ -93,9 +94,11 @@ fman0: fman@400000 {
reg = <0x87000 0x1000>;
status = "disabled";
};
ptp_timer0: ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
};
ptp_timer0: ptp-timer@4fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x4fe000 0x1000>;
interrupts = <96 2 0 0>;
clocks = <&clockgen 3 0>;
};

View File

@ -37,12 +37,13 @@ fman1: fman@500000 {
#size-cells = <1>;
cell-index = <1>;
compatible = "fsl,fman";
ranges = <0 0x500000 0x100000>;
reg = <0x500000 0x100000>;
ranges = <0 0x500000 0xfe000>;
reg = <0x500000 0xfe000>;
interrupts = <97 2 0 0>, <16 2 1 0>;
clocks = <&clockgen 3 1>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x60 0xc>;
ptimer-handle = <&ptp_timer1>;
muram@0 {
compatible = "fsl,fman-muram";
@ -93,9 +94,11 @@ fman1: fman@500000 {
reg = <0x87000 0x1000>;
status = "disabled";
};
ptp_timer1: ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
};
ptp_timer1: ptp-timer@5fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x5fe000 0x1000>;
interrupts = <97 2 0 0>;
clocks = <&clockgen 3 1>;
};

View File

@ -37,12 +37,13 @@ fman0: fman@400000 {
#size-cells = <1>;
cell-index = <0>;
compatible = "fsl,fman";
ranges = <0 0x400000 0x100000>;
reg = <0x400000 0x100000>;
ranges = <0 0x400000 0xfe000>;
reg = <0x400000 0xfe000>;
interrupts = <96 2 0 0>, <16 2 1 1>;
clocks = <&clockgen 3 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
muram@0 {
compatible = "fsl,fman-muram";
@ -98,9 +99,11 @@ fman0: fman@400000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfd000 0x1000>;
};
ptp_timer0: ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
};
ptp_timer0: ptp-timer@4fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x4fe000 0x1000>;
interrupts = <96 2 0 0>;
clocks = <&clockgen 3 0>;
};

View File

@ -37,12 +37,13 @@ fman1: fman@500000 {
#size-cells = <1>;
cell-index = <1>;
compatible = "fsl,fman";
ranges = <0 0x500000 0x100000>;
reg = <0x500000 0x100000>;
ranges = <0 0x500000 0xfe000>;
reg = <0x500000 0xfe000>;
interrupts = <97 2 0 0>, <16 2 1 0>;
clocks = <&clockgen 3 1>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x820 0x10>;
ptimer-handle = <&ptp_timer1>;
muram@0 {
compatible = "fsl,fman-muram";
@ -98,9 +99,11 @@ fman1: fman@500000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfd000 0x1000>;
};
ptp_timer1: ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
};
ptp_timer1: ptp-timer@5fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x5fe000 0x1000>;
interrupts = <97 2 0 0>;
clocks = <&clockgen 3 1>;
};

View File

@ -37,12 +37,13 @@ fman0: fman@400000 {
#size-cells = <1>;
cell-index = <0>;
compatible = "fsl,fman";
ranges = <0 0x400000 0x100000>;
reg = <0x400000 0x100000>;
ranges = <0 0x400000 0xfe000>;
reg = <0x400000 0xfe000>;
interrupts = <96 2 0 0>, <16 2 1 1>;
clocks = <&clockgen 3 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
muram@0 {
compatible = "fsl,fman-muram";
@ -86,9 +87,11 @@ fman0: fman@400000 {
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfd000 0x1000>;
};
ptp_timer0: ptp-timer@fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0xfe000 0x1000>;
};
};
ptp_timer0: ptp-timer@4fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x4fe000 0x1000>;
interrupts = <96 2 0 0>;
clocks = <&clockgen 3 0>;
};

View File

@ -78,7 +78,6 @@ CONFIG_GPIO_HLWD=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_HWMON is not set
CONFIG_SSB_DEBUG=y
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y

View File

@ -111,4 +111,7 @@
#define SO_ZEROCOPY 60
#define SO_TXTIME 61
#define SCM_TXTIME SO_TXTIME
#endif /* _ASM_SOCKET_H */

View File

@ -101,6 +101,9 @@
#define SO_ZEROCOPY 0x003e
#define SO_TXTIME 0x003f
#define SCM_TXTIME SO_TXTIME
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define SO_SECURITY_AUTHENTICATION 0x5001
#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002

View File

@ -204,6 +204,7 @@ static int rdtgroup_add_file(struct kernfs_node *parent_kn, struct rftype *rft)
int ret;
kn = __kernfs_create_file(parent_kn, rft->name, rft->mode,
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID,
0, rft->kf_ops, rft, NULL, NULL);
if (IS_ERR(kn))
return PTR_ERR(kn);
@ -2095,7 +2096,8 @@ static int mon_addfile(struct kernfs_node *parent_kn, const char *name,
struct kernfs_node *kn;
int ret = 0;
kn = __kernfs_create_file(parent_kn, name, 0444, 0,
kn = __kernfs_create_file(parent_kn, name, 0444,
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, 0,
&kf_mondata_ops, priv, NULL, NULL);
if (IS_ERR(kn))
return PTR_ERR(kn);

View File

@ -116,4 +116,7 @@
#define SO_ZEROCOPY 60
#define SO_TXTIME 61
#define SCM_TXTIME SO_TXTIME
#endif /* _XTENSA_SOCKET_H */

View File

@ -1071,7 +1071,7 @@ __poll_t af_alg_poll(struct file *file, struct socket *sock,
struct af_alg_ctx *ctx = ask->private;
__poll_t mask;
sock_poll_wait(file, sk_sleep(sk), wait);
sock_poll_wait(file, wait);
mask = 0;
if (!ctx->more || ctx->used)

View File

@ -1385,14 +1385,12 @@ static void zatm_close(struct atm_vcc *vcc)
static int zatm_open(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
short vpi = vcc->vpi;
int vci = vcc->vci;
int error;
DPRINTK(">zatm_open\n");
zatm_dev = ZATM_DEV(vcc->dev);
if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))
vcc->dev_data = NULL;
if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC)

View File

@ -907,10 +907,19 @@ static const void *device_namespace(struct kobject *kobj)
return ns;
}
static void device_get_ownership(struct kobject *kobj, kuid_t *uid, kgid_t *gid)
{
struct device *dev = kobj_to_dev(kobj);
if (dev->class && dev->class->get_ownership)
dev->class->get_ownership(dev, uid, gid);
}
static struct kobj_type device_ktype = {
.release = device_release,
.sysfs_ops = &dev_sysfs_ops,
.namespace = device_namespace,
.get_ownership = device_get_ownership,
};

View File

@ -1633,7 +1633,7 @@ static int find_free_cb(int id, void *ptr, void *data)
}
/* Netlink interface. */
static struct nla_policy nbd_attr_policy[NBD_ATTR_MAX + 1] = {
static const struct nla_policy nbd_attr_policy[NBD_ATTR_MAX + 1] = {
[NBD_ATTR_INDEX] = { .type = NLA_U32 },
[NBD_ATTR_SIZE_BYTES] = { .type = NLA_U64 },
[NBD_ATTR_BLOCK_SIZE_BYTES] = { .type = NLA_U64 },
@ -1645,14 +1645,14 @@ static struct nla_policy nbd_attr_policy[NBD_ATTR_MAX + 1] = {
[NBD_ATTR_DEVICE_LIST] = { .type = NLA_NESTED},
};
static struct nla_policy nbd_sock_policy[NBD_SOCK_MAX + 1] = {
static const struct nla_policy nbd_sock_policy[NBD_SOCK_MAX + 1] = {
[NBD_SOCK_FD] = { .type = NLA_U32 },
};
/* We don't use this right now since we don't parse the incoming list, but we
* still want it here so userspace knows what to expect.
*/
static struct nla_policy __attribute__((unused))
static const struct nla_policy __attribute__((unused))
nbd_device_policy[NBD_DEVICE_ATTR_MAX + 1] = {
[NBD_DEVICE_INDEX] = { .type = NLA_U32 },
[NBD_DEVICE_CONNECTED] = { .type = NLA_U8 },

View File

@ -159,6 +159,7 @@ config BT_HCIUART_LL
config BT_HCIUART_3WIRE
bool "Three-wire UART (H5) protocol support"
depends on BT_HCIUART
depends on BT_HCIUART_SERDEV
help
The HCI Three-wire UART Transport Layer makes it possible to
user the Bluetooth HCI over a serial port interface. The HCI
@ -194,6 +195,19 @@ config BT_HCIUART_BCM
Say Y here to compile support for Broadcom protocol.
config BT_HCIUART_RTL
bool "Realtek protocol support"
depends on BT_HCIUART
depends on BT_HCIUART_SERDEV
depends on GPIOLIB
select BT_HCIUART_3WIRE
select BT_RTL
help
The Realtek protocol support enables Bluetooth HCI over 3-Wire
serial port internface for Realtek Bluetooth controllers.
Say Y here to compile support for Realtek protocol.
config BT_HCIUART_QCA
bool "Qualcomm Atheros protocol support"
depends on BT_HCIUART
@ -364,6 +378,17 @@ config BT_WILINK
Say Y here to compile support for Texas Instrument's WiLink7 driver
into the kernel or say M to compile it as module (btwilink).
config BT_MTKUART
tristate "MediaTek HCI UART driver"
depends on SERIAL_DEV_BUS
help
MediaTek Bluetooth HCI UART driver.
This driver is required if you want to use MediaTek Bluetooth
with serial interface.
Say Y here to compile support for MediaTek Bluetooth UART devices
into the kernel or say M to compile it as module (btmtkuart).
config BT_QCOMSMD
tristate "Qualcomm SMD based HCI support"
depends on RPMSG || (COMPILE_TEST && RPMSG=n)

View File

@ -20,6 +20,7 @@ obj-$(CONFIG_BT_ATH3K) += ath3k.o
obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_MTKUART) += btmtkuart.o
obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o

View File

@ -490,7 +490,7 @@ static int bfusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
count = skb->len;
/* Max HCI frame size seems to be 1511 + 1 */
nskb = bt_skb_alloc(count + 32, GFP_ATOMIC);
nskb = bt_skb_alloc(count + 32, GFP_KERNEL);
if (!nskb) {
BT_ERR("Can't allocate memory for new packet");
return -ENOMEM;

View File

@ -565,7 +565,7 @@ static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
/* Ericsson baud rate command */
unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_KERNEL);
if (!skb) {
BT_ERR("Can't allocate mem for new packet");
return -1;

View File

@ -289,7 +289,7 @@ static int bpa10x_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
skb->dev = (void *) hdev;
urb = usb_alloc_urb(0, GFP_ATOMIC);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
@ -298,7 +298,7 @@ static int bpa10x_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
switch (hci_skb_pkt_type(skb)) {
case HCI_COMMAND_PKT:
dr = kmalloc(sizeof(*dr), GFP_ATOMIC);
dr = kmalloc(sizeof(*dr), GFP_KERNEL);
if (!dr) {
usb_free_urb(urb);
return -ENOMEM;
@ -343,7 +343,7 @@ static int bpa10x_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
usb_anchor_urb(urb, &data->tx_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err < 0) {
bt_dev_err(hdev, "urb %p submission failed", urb);
kfree(urb->setup_packet);

View File

@ -718,7 +718,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
}
/* Allocate buffer */
skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_ATOMIC);
skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_KERNEL);
if (!skb) {
BT_ERR("No free skb");
ret = -ENOMEM;

View File

@ -0,0 +1,629 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018 MediaTek Inc.
/*
* Bluetooth support for MediaTek serial devices
*
* Author: Sean Wang <sean.wang@mediatek.com>
*
*/
#include <asm/unaligned.h>
#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm_runtime.h>
#include <linux/serdev.h>
#include <linux/skbuff.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "h4_recv.h"
#define VERSION "0.1"
#define FIRMWARE_MT7622 "mediatek/mt7622pr2h.bin"
#define MTK_STP_TLR_SIZE 2
#define BTMTKUART_TX_STATE_ACTIVE 1
#define BTMTKUART_TX_STATE_WAKEUP 2
#define BTMTKUART_TX_WAIT_VND_EVT 3
enum {
MTK_WMT_PATCH_DWNLD = 0x1,
MTK_WMT_FUNC_CTRL = 0x6,
MTK_WMT_RST = 0x7
};
struct mtk_stp_hdr {
u8 prefix;
__be16 dlen;
u8 cs;
} __packed;
struct mtk_wmt_hdr {
u8 dir;
u8 op;
__le16 dlen;
u8 flag;
} __packed;
struct mtk_hci_wmt_cmd {
struct mtk_wmt_hdr hdr;
u8 data[256];
} __packed;
struct btmtkuart_dev {
struct hci_dev *hdev;
struct serdev_device *serdev;
struct clk *clk;
struct work_struct tx_work;
unsigned long tx_state;
struct sk_buff_head txq;
struct sk_buff *rx_skb;
u8 stp_pad[6];
u8 stp_cursor;
u16 stp_dlen;
};
static int mtk_hci_wmt_sync(struct hci_dev *hdev, u8 op, u8 flag, u16 plen,
const void *param)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct mtk_hci_wmt_cmd wc;
struct mtk_wmt_hdr *hdr;
u32 hlen;
int err;
hlen = sizeof(*hdr) + plen;
if (hlen > 255)
return -EINVAL;
hdr = (struct mtk_wmt_hdr *)&wc;
hdr->dir = 1;
hdr->op = op;
hdr->dlen = cpu_to_le16(plen + 1);
hdr->flag = flag;
memcpy(wc.data, param, plen);
set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
if (err < 0) {
clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
return err;
}
/* The vendor specific WMT commands are all answered by a vendor
* specific event and will not have the Command Status or Command
* Complete as with usual HCI command flow control.
*
* After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT
* state to be cleared. The driver speicfic event receive routine
* will clear that state and with that indicate completion of the
* WMT command.
*/
err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT,
TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
if (err == -EINTR) {
bt_dev_err(hdev, "Execution of wmt command interrupted");
return err;
}
if (err) {
bt_dev_err(hdev, "Execution of wmt command timed out");
return -ETIMEDOUT;
}
return 0;
}
static int mtk_setup_fw(struct hci_dev *hdev)
{
const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
int err, dlen;
u8 flag;
err = request_firmware(&fw, FIRMWARE_MT7622, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
return err;
}
fw_ptr = fw->data;
fw_size = fw->size;
/* The size of patch header is 30 bytes, should be skip */
if (fw_size < 30)
return -EINVAL;
fw_size -= 30;
fw_ptr += 30;
flag = 1;
while (fw_size > 0) {
dlen = min_t(int, 250, fw_size);
/* Tell device the position in sequence */
if (fw_size - dlen <= 0)
flag = 3;
else if (fw_size < fw->size - 30)
flag = 2;
err = mtk_hci_wmt_sync(hdev, MTK_WMT_PATCH_DWNLD, flag, dlen,
fw_ptr);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
err);
break;
}
fw_size -= dlen;
fw_ptr += dlen;
}
release_firmware(fw);
return err;
}
static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct hci_event_hdr *hdr = (void *)skb->data;
int err;
/* Fix up the vendor event id with 0xff for vendor specific instead
* of 0xe4 so that event send via monitoring socket can be parsed
* properly.
*/
if (hdr->evt == 0xe4)
hdr->evt = HCI_EV_VENDOR;
err = hci_recv_frame(hdev, skb);
if (hdr->evt == HCI_EV_VENDOR) {
if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT,
&bdev->tx_state)) {
/* Barrier to sync with other CPUs */
smp_mb__after_atomic();
wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT);
}
}
return err;
}
static const struct h4_recv_pkt mtk_recv_pkts[] = {
{ H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = btmtkuart_recv_event },
};
static void btmtkuart_tx_work(struct work_struct *work)
{
struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev,
tx_work);
struct serdev_device *serdev = bdev->serdev;
struct hci_dev *hdev = bdev->hdev;
while (1) {
clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
while (1) {
struct sk_buff *skb = skb_dequeue(&bdev->txq);
int len;
if (!skb)
break;
len = serdev_device_write_buf(serdev, skb->data,
skb->len);
hdev->stat.byte_tx += len;
skb_pull(skb, len);
if (skb->len > 0) {
skb_queue_head(&bdev->txq, skb);
break;
}
switch (hci_skb_pkt_type(skb)) {
case HCI_COMMAND_PKT:
hdev->stat.cmd_tx++;
break;
case HCI_ACLDATA_PKT:
hdev->stat.acl_tx++;
break;
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
break;
}
kfree_skb(skb);
}
if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state))
break;
}
clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state);
}
static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev)
{
if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state))
set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
schedule_work(&bdev->tx_work);
}
static const unsigned char *
mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count,
int *sz_h4)
{
struct mtk_stp_hdr *shdr;
/* The cursor is reset when all the data of STP is consumed out */
if (!bdev->stp_dlen && bdev->stp_cursor >= 6)
bdev->stp_cursor = 0;
/* Filling pad until all STP info is obtained */
while (bdev->stp_cursor < 6 && count > 0) {
bdev->stp_pad[bdev->stp_cursor] = *data;
bdev->stp_cursor++;
data++;
count--;
}
/* Retrieve STP info and have a sanity check */
if (!bdev->stp_dlen && bdev->stp_cursor >= 6) {
shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2];
bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff;
/* Resync STP when unexpected data is being read */
if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) {
bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)",
shdr->prefix, bdev->stp_dlen);
bdev->stp_cursor = 2;
bdev->stp_dlen = 0;
}
}
/* Directly quit when there's no data found for H4 can process */
if (count <= 0)
return NULL;
/* Tranlate to how much the size of data H4 can handle so far */
*sz_h4 = min_t(int, count, bdev->stp_dlen);
/* Update the remaining size of STP packet */
bdev->stp_dlen -= *sz_h4;
/* Data points to STP payload which can be handled by H4 */
return data;
}
static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
const unsigned char *p_left = data, *p_h4;
int sz_left = count, sz_h4, adv;
int err;
while (sz_left > 0) {
/* The serial data received from MT7622 BT controller is
* at all time padded around with the STP header and tailer.
*
* A full STP packet is looking like
* -----------------------------------
* | STP header | H:4 | STP tailer |
* -----------------------------------
* but it doesn't guarantee to contain a full H:4 packet which
* means that it's possible for multiple STP packets forms a
* full H:4 packet that means extra STP header + length doesn't
* indicate a full H:4 frame, things can fragment. Whose length
* recorded in STP header just shows up the most length the
* H:4 engine can handle currently.
*/
p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4);
if (!p_h4)
break;
adv = p_h4 - p_left;
sz_left -= adv;
p_left += adv;
bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4,
sz_h4, mtk_recv_pkts,
ARRAY_SIZE(mtk_recv_pkts));
if (IS_ERR(bdev->rx_skb)) {
err = PTR_ERR(bdev->rx_skb);
bt_dev_err(bdev->hdev,
"Frame reassembly failed (%d)", err);
bdev->rx_skb = NULL;
return err;
}
sz_left -= sz_h4;
p_left += sz_h4;
}
return 0;
}
static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data,
size_t count)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
int err;
err = btmtkuart_recv(bdev->hdev, data, count);
if (err < 0)
return err;
bdev->hdev->stat.byte_rx += count;
return count;
}
static void btmtkuart_write_wakeup(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
btmtkuart_tx_wakeup(bdev);
}
static const struct serdev_device_ops btmtkuart_client_ops = {
.receive_buf = btmtkuart_receive_buf,
.write_wakeup = btmtkuart_write_wakeup,
};
static int btmtkuart_open(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct device *dev;
int err;
err = serdev_device_open(bdev->serdev);
if (err) {
bt_dev_err(hdev, "Unable to open UART device %s",
dev_name(&bdev->serdev->dev));
goto err_open;
}
bdev->stp_cursor = 2;
bdev->stp_dlen = 0;
dev = &bdev->serdev->dev;
/* Enable the power domain and clock the device requires */
pm_runtime_enable(dev);
err = pm_runtime_get_sync(dev);
if (err < 0) {
pm_runtime_put_noidle(dev);
goto err_disable_rpm;
}
err = clk_prepare_enable(bdev->clk);
if (err < 0)
goto err_put_rpm;
return 0;
err_put_rpm:
pm_runtime_put_sync(dev);
err_disable_rpm:
pm_runtime_disable(dev);
err_open:
return err;
}
static int btmtkuart_close(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct device *dev = &bdev->serdev->dev;
/* Shutdown the clock and power domain the device requires */
clk_disable_unprepare(bdev->clk);
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
serdev_device_close(bdev->serdev);
return 0;
}
static int btmtkuart_flush(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
/* Flush any pending characters */
serdev_device_write_flush(bdev->serdev);
skb_queue_purge(&bdev->txq);
cancel_work_sync(&bdev->tx_work);
kfree_skb(bdev->rx_skb);
bdev->rx_skb = NULL;
bdev->stp_cursor = 2;
bdev->stp_dlen = 0;
return 0;
}
static int btmtkuart_setup(struct hci_dev *hdev)
{
u8 param = 0x1;
int err = 0;
/* Setup a firmware which the device definitely requires */
err = mtk_setup_fw(hdev);
if (err < 0)
return err;
/* Activate function the firmware providing to */
err = mtk_hci_wmt_sync(hdev, MTK_WMT_RST, 0x4, 0, 0);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
return err;
}
/* Enable Bluetooth protocol */
err = mtk_hci_wmt_sync(hdev, MTK_WMT_FUNC_CTRL, 0x0, sizeof(param),
&param);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
return err;
}
return 0;
}
static int btmtkuart_shutdown(struct hci_dev *hdev)
{
u8 param = 0x0;
int err;
/* Disable the device */
err = mtk_hci_wmt_sync(hdev, MTK_WMT_FUNC_CTRL, 0x0, sizeof(param),
&param);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
return err;
}
return 0;
}
static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct mtk_stp_hdr *shdr;
int err, dlen, type = 0;
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
/* Make sure that there is enough rooms for STP header and trailer */
if (unlikely(skb_headroom(skb) < sizeof(*shdr)) ||
(skb_tailroom(skb) < MTK_STP_TLR_SIZE)) {
err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE,
GFP_ATOMIC);
if (err < 0)
return err;
}
/* Add the STP header */
dlen = skb->len;
shdr = skb_push(skb, sizeof(*shdr));
shdr->prefix = 0x80;
shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12));
shdr->cs = 0; /* MT7622 doesn't care about checksum value */
/* Add the STP trailer */
skb_put_zero(skb, MTK_STP_TLR_SIZE);
skb_queue_tail(&bdev->txq, skb);
btmtkuart_tx_wakeup(bdev);
return 0;
}
static int btmtkuart_probe(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev;
struct hci_dev *hdev;
bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL);
if (!bdev)
return -ENOMEM;
bdev->clk = devm_clk_get(&serdev->dev, "ref");
if (IS_ERR(bdev->clk))
return PTR_ERR(bdev->clk);
bdev->serdev = serdev;
serdev_device_set_drvdata(serdev, bdev);
serdev_device_set_client_ops(serdev, &btmtkuart_client_ops);
INIT_WORK(&bdev->tx_work, btmtkuart_tx_work);
skb_queue_head_init(&bdev->txq);
/* Initialize and register HCI device */
hdev = hci_alloc_dev();
if (!hdev) {
dev_err(&serdev->dev, "Can't allocate HCI device\n");
return -ENOMEM;
}
bdev->hdev = hdev;
hdev->bus = HCI_UART;
hci_set_drvdata(hdev, bdev);
hdev->open = btmtkuart_open;
hdev->close = btmtkuart_close;
hdev->flush = btmtkuart_flush;
hdev->setup = btmtkuart_setup;
hdev->shutdown = btmtkuart_shutdown;
hdev->send = btmtkuart_send_frame;
SET_HCIDEV_DEV(hdev, &serdev->dev);
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
if (hci_register_dev(hdev) < 0) {
dev_err(&serdev->dev, "Can't register HCI device\n");
hci_free_dev(hdev);
return -ENODEV;
}
return 0;
}
static void btmtkuart_remove(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
struct hci_dev *hdev = bdev->hdev;
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
#ifdef CONFIG_OF
static const struct of_device_id mtk_of_match_table[] = {
{ .compatible = "mediatek,mt7622-bluetooth"},
{ }
};
MODULE_DEVICE_TABLE(of, mtk_of_match_table);
#endif
static struct serdev_device_driver btmtkuart_driver = {
.probe = btmtkuart_probe,
.remove = btmtkuart_remove,
.driver = {
.name = "btmtkuart",
.of_match_table = of_match_ptr(mtk_of_match_table),
},
};
module_serdev_device_driver(btmtkuart_driver);
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(FIRMWARE_MT7622);

View File

@ -27,7 +27,7 @@
#define VERSION "0.1"
static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
{
struct sk_buff *skb;
struct edl_event_hdr *edl;
@ -35,36 +35,35 @@ static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
char cmd;
int err = 0;
BT_DBG("%s: ROME Patch Version Request", hdev->name);
bt_dev_dbg(hdev, "QCA Version Request");
cmd = EDL_PATCH_VER_REQ_CMD;
skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
&cmd, HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
&cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: Failed to read version of ROME (%d)", hdev->name,
err);
bt_dev_err(hdev, "Reading QCA version information failed (%d)",
err);
return err;
}
if (skb->len != sizeof(*edl) + sizeof(*ver)) {
BT_ERR("%s: Version size mismatch len %d", hdev->name,
skb->len);
bt_dev_err(hdev, "QCA Version size mismatch len %d", skb->len);
err = -EILSEQ;
goto out;
}
edl = (struct edl_event_hdr *)(skb->data);
if (!edl) {
BT_ERR("%s: TLV with no header", hdev->name);
bt_dev_err(hdev, "QCA TLV with no header");
err = -EILSEQ;
goto out;
}
if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
edl->rtype != EDL_APP_VER_RES_EVT) {
BT_ERR("%s: Wrong packet received %d %d", hdev->name,
edl->cresp, edl->rtype);
bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
edl->rtype);
err = -EIO;
goto out;
}
@ -76,30 +75,35 @@ static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rome_ver));
BT_DBG("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id));
/* ROME chipset version can be decided by patch and SoC
/* QCA chipset version can be decided by patch and SoC
* version, combination with upper 2 bytes from SoC
* and lower 2 bytes from patch will be used.
*/
*rome_version = (le32_to_cpu(ver->soc_id) << 16) |
*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
(le16_to_cpu(ver->rome_ver) & 0x0000ffff);
if (*soc_version == 0)
err = -EILSEQ;
out:
kfree_skb(skb);
if (err)
bt_dev_err(hdev, "QCA Failed to get version (%d)", err);
return err;
}
EXPORT_SYMBOL_GPL(qca_read_soc_version);
static int rome_reset(struct hci_dev *hdev)
static int qca_send_reset(struct hci_dev *hdev)
{
struct sk_buff *skb;
int err;
BT_DBG("%s: ROME HCI_RESET", hdev->name);
bt_dev_dbg(hdev, "QCA HCI_RESET");
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: Reset failed (%d)", hdev->name, err);
bt_dev_err(hdev, "QCA Reset failed (%d)", err);
return err;
}
@ -108,7 +112,7 @@ static int rome_reset(struct hci_dev *hdev)
return 0;
}
static void rome_tlv_check_data(struct rome_config *config,
static void qca_tlv_check_data(struct rome_config *config,
const struct firmware *fw)
{
const u8 *data;
@ -207,7 +211,7 @@ static void rome_tlv_check_data(struct rome_config *config,
}
}
static int rome_tlv_send_segment(struct hci_dev *hdev, int seg_size,
static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
const u8 *data, enum rome_tlv_dnld_mode mode)
{
struct sk_buff *skb;
@ -225,22 +229,22 @@ static int rome_tlv_send_segment(struct hci_dev *hdev, int seg_size,
cmd);
skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2, cmd,
HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: Failed to send TLV segment (%d)", hdev->name, err);
bt_dev_err(hdev, "QCA Failed to send TLV segment (%d)", err);
return err;
}
if (skb->len != sizeof(*edl) + sizeof(*tlv_resp)) {
BT_ERR("%s: TLV response size mismatch", hdev->name);
bt_dev_err(hdev, "QCA TLV response size mismatch");
err = -EILSEQ;
goto out;
}
edl = (struct edl_event_hdr *)(skb->data);
if (!edl) {
BT_ERR("%s: TLV with no header", hdev->name);
bt_dev_err(hdev, "TLV with no header");
err = -EILSEQ;
goto out;
}
@ -249,8 +253,8 @@ static int rome_tlv_send_segment(struct hci_dev *hdev, int seg_size,
if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
edl->rtype != EDL_TVL_DNLD_RES_EVT || tlv_resp->result != 0x00) {
BT_ERR("%s: TLV with error stat 0x%x rtype 0x%x (0x%x)",
hdev->name, edl->cresp, edl->rtype, tlv_resp->result);
bt_dev_err(hdev, "QCA TLV with error stat 0x%x rtype 0x%x (0x%x)",
edl->cresp, edl->rtype, tlv_resp->result);
err = -EIO;
}
@ -260,23 +264,23 @@ out:
return err;
}
static int rome_download_firmware(struct hci_dev *hdev,
static int qca_download_firmware(struct hci_dev *hdev,
struct rome_config *config)
{
const struct firmware *fw;
const u8 *segment;
int ret, remain, i = 0;
bt_dev_info(hdev, "ROME Downloading %s", config->fwname);
bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
ret = request_firmware(&fw, config->fwname, &hdev->dev);
if (ret) {
BT_ERR("%s: Failed to request file: %s (%d)", hdev->name,
config->fwname, ret);
bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
config->fwname, ret);
return ret;
}
rome_tlv_check_data(config, fw);
qca_tlv_check_data(config, fw);
segment = fw->data;
remain = fw->size;
@ -290,7 +294,7 @@ static int rome_download_firmware(struct hci_dev *hdev,
if (!remain || segsize < MAX_SIZE_PER_TLV_SEGMENT)
config->dnld_mode = ROME_SKIP_EVT_NONE;
ret = rome_tlv_send_segment(hdev, segsize, segment,
ret = qca_tlv_send_segment(hdev, segsize, segment,
config->dnld_mode);
if (ret)
break;
@ -314,11 +318,10 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
cmd[2] = sizeof(bdaddr_t); /* size */
memcpy(cmd + 3, bdaddr, sizeof(bdaddr_t));
skb = __hci_cmd_sync_ev(hdev, EDL_NVM_ACCESS_OPCODE, sizeof(cmd), cmd,
HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: Change address command failed (%d)",
hdev->name, err);
bt_dev_err(hdev, "QCA Change address command failed (%d)", err);
return err;
}
@ -328,57 +331,65 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, u32 soc_ver)
{
u32 rome_ver = 0;
struct rome_config config;
int err;
u8 rom_ver;
BT_DBG("%s: ROME setup on UART", hdev->name);
bt_dev_dbg(hdev, "QCA setup on UART");
config.user_baud_rate = baudrate;
/* Get ROME version information */
err = rome_patch_ver_req(hdev, &rome_ver);
if (err < 0 || rome_ver == 0) {
BT_ERR("%s: Failed to get version 0x%x", hdev->name, err);
return err;
}
bt_dev_info(hdev, "ROME controller version 0x%08x", rome_ver);
/* Download rampatch file */
config.type = TLV_TYPE_PATCH;
snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.bin",
rome_ver);
err = rome_download_firmware(hdev, &config);
if (soc_type == QCA_WCN3990) {
/* Firmware files to download are based on ROM version.
* ROM version is derived from last two bytes of soc_ver.
*/
rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
(soc_ver & 0x0000000f);
snprintf(config.fwname, sizeof(config.fwname),
"qca/crbtfw%02x.tlv", rom_ver);
} else {
snprintf(config.fwname, sizeof(config.fwname),
"qca/rampatch_%08x.bin", soc_ver);
}
err = qca_download_firmware(hdev, &config);
if (err < 0) {
BT_ERR("%s: Failed to download patch (%d)", hdev->name, err);
bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
return err;
}
/* Download NVM configuration */
config.type = TLV_TYPE_NVM;
snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
rome_ver);
err = rome_download_firmware(hdev, &config);
if (soc_type == QCA_WCN3990)
snprintf(config.fwname, sizeof(config.fwname),
"qca/crnv%02x.bin", rom_ver);
else
snprintf(config.fwname, sizeof(config.fwname),
"qca/nvm_%08x.bin", soc_ver);
err = qca_download_firmware(hdev, &config);
if (err < 0) {
BT_ERR("%s: Failed to download NVM (%d)", hdev->name, err);
bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
return err;
}
/* Perform HCI reset */
err = rome_reset(hdev);
err = qca_send_reset(hdev);
if (err < 0) {
BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err);
bt_dev_err(hdev, "QCA Failed to run HCI_RESET (%d)", err);
return err;
}
bt_dev_info(hdev, "ROME setup on UART is completed");
bt_dev_info(hdev, "QCA setup on UART is completed");
return 0;
}
EXPORT_SYMBOL_GPL(qca_uart_setup_rome);
EXPORT_SYMBOL_GPL(qca_uart_setup);
MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);

View File

@ -37,6 +37,9 @@
#define EDL_TAG_ID_HCI (17)
#define EDL_TAG_ID_DEEP_SLEEP (27)
#define QCA_WCN3990_POWERON_PULSE 0xFC
#define QCA_WCN3990_POWEROFF_PULSE 0xC0
enum qca_bardrate {
QCA_BAUDRATE_115200 = 0,
QCA_BAUDRATE_57600,
@ -124,10 +127,19 @@ struct tlv_type_hdr {
__u8 data[0];
} __packed;
enum qca_btsoc_type {
QCA_INVALID = -1,
QCA_AR3002,
QCA_ROME,
QCA_WCN3990
};
#if IS_ENABLED(CONFIG_BT_QCA)
int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, u32 soc_ver);
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
#else
@ -136,7 +148,13 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
return -EOPNOTSUPP;
}
static inline int qca_uart_setup_rome(struct hci_dev *hdev, int speed)
static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, u32 soc_ver)
{
return -EOPNOTSUPP;
}
static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
{
return -EOPNOTSUPP;
}

View File

@ -34,9 +34,12 @@
#define RTL_ROM_LMP_8821A 0x8821
#define RTL_ROM_LMP_8761A 0x8761
#define RTL_ROM_LMP_8822B 0x8822
#define RTL_CONFIG_MAGIC 0x8723ab55
#define IC_MATCH_FL_LMPSUBV (1 << 0)
#define IC_MATCH_FL_HCIREV (1 << 1)
#define IC_MATCH_FL_HCIVER (1 << 2)
#define IC_MATCH_FL_HCIBUS (1 << 3)
#define IC_INFO(lmps, hcir) \
.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV, \
.lmp_subver = (lmps), \
@ -46,49 +49,130 @@ struct id_table {
__u16 match_flags;
__u16 lmp_subver;
__u16 hci_rev;
__u8 hci_ver;
__u8 hci_bus;
bool config_needed;
bool has_rom_version;
char *fw_name;
char *cfg_name;
};
struct btrtl_device_info {
const struct id_table *ic_info;
u8 rom_version;
u8 *fw_data;
int fw_len;
u8 *cfg_data;
int cfg_len;
};
static const struct id_table ic_id_table[] = {
{ IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_8723A, 0x0,
.config_needed = false,
.has_rom_version = false,
.fw_name = "rtl_bt/rtl8723a_fw.bin",
.cfg_name = NULL },
{ IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_3499, 0x0,
.config_needed = false,
.has_rom_version = false,
.fw_name = "rtl_bt/rtl8723a_fw.bin",
.cfg_name = NULL },
/* 8723BS */
{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
.lmp_subver = RTL_ROM_LMP_8723B,
.hci_rev = 0xb,
.hci_ver = 6,
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8723bs_fw.bin",
.cfg_name = "rtl_bt/rtl8723bs_config" },
/* 8723B */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xb),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8723b_fw.bin",
.cfg_name = "rtl_bt/rtl8723b_config.bin" },
.cfg_name = "rtl_bt/rtl8723b_config" },
/* 8723D */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xd),
.config_needed = true,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8723d_fw.bin",
.cfg_name = "rtl_bt/rtl8723d_config.bin" },
.cfg_name = "rtl_bt/rtl8723d_config" },
/* 8723DS */
{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
.lmp_subver = RTL_ROM_LMP_8723B,
.hci_rev = 0xd,
.hci_ver = 8,
.hci_bus = HCI_UART,
.config_needed = true,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8723ds_fw.bin",
.cfg_name = "rtl_bt/rtl8723ds_config" },
/* 8821A */
{ IC_INFO(RTL_ROM_LMP_8821A, 0xa),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8821a_fw.bin",
.cfg_name = "rtl_bt/rtl8821a_config.bin" },
.cfg_name = "rtl_bt/rtl8821a_config" },
/* 8821C */
{ IC_INFO(RTL_ROM_LMP_8821A, 0xc),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8821c_fw.bin",
.cfg_name = "rtl_bt/rtl8821c_config.bin" },
.cfg_name = "rtl_bt/rtl8821c_config" },
/* 8761A */
{ IC_MATCH_FL_LMPSUBV, RTL_ROM_LMP_8761A, 0x0,
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8761a_fw.bin",
.cfg_name = "rtl_bt/rtl8761a_config.bin" },
.cfg_name = "rtl_bt/rtl8761a_config" },
/* 8822B */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xb),
.config_needed = true,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8822b_fw.bin",
.cfg_name = "rtl_bt/rtl8822b_config.bin" },
.cfg_name = "rtl_bt/rtl8822b_config" },
};
static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
u8 hci_ver, u8 hci_bus)
{
int i;
for (i = 0; i < ARRAY_SIZE(ic_id_table); i++) {
if ((ic_id_table[i].match_flags & IC_MATCH_FL_LMPSUBV) &&
(ic_id_table[i].lmp_subver != lmp_subver))
continue;
if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIREV) &&
(ic_id_table[i].hci_rev != hci_rev))
continue;
if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIVER) &&
(ic_id_table[i].hci_ver != hci_ver))
continue;
if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) &&
(ic_id_table[i].hci_bus != hci_bus))
continue;
break;
}
if (i >= ARRAY_SIZE(ic_id_table))
return NULL;
return &ic_id_table[i];
}
static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
{
struct rtl_rom_version_evt *rom_version;
@ -97,20 +181,20 @@ static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
/* Read RTL ROM version command */
skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Read ROM version failed (%ld)",
hdev->name, PTR_ERR(skb));
rtl_dev_err(hdev, "Read ROM version failed (%ld)\n",
PTR_ERR(skb));
return PTR_ERR(skb);
}
if (skb->len != sizeof(*rom_version)) {
BT_ERR("%s: RTL version event length mismatch", hdev->name);
rtl_dev_err(hdev, "RTL version event length mismatch\n");
kfree_skb(skb);
return -EIO;
}
rom_version = (struct rtl_rom_version_evt *)skb->data;
bt_dev_info(hdev, "rom_version status=%x version=%x",
rom_version->status, rom_version->version);
rtl_dev_info(hdev, "rom_version status=%x version=%x\n",
rom_version->status, rom_version->version);
*version = rom_version->version;
@ -118,16 +202,16 @@ static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
return 0;
}
static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
const struct firmware *fw,
static int rtlbt_parse_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned char **_buf)
{
const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
struct rtl_epatch_header *epatch_info;
unsigned char *buf;
int i, ret, len;
int i, len;
size_t min_size;
u8 opcode, length, data, rom_version = 0;
u8 opcode, length, data;
int project_id = -1;
const unsigned char *fwptr, *chip_id_base;
const unsigned char *patch_length_base, *patch_offset_base;
@ -146,17 +230,13 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
{ RTL_ROM_LMP_8821A, 10 }, /* 8821C */
};
ret = rtl_read_rom_version(hdev, &rom_version);
if (ret)
return ret;
min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
if (fw->size < min_size)
if (btrtl_dev->fw_len < min_size)
return -EINVAL;
fwptr = fw->data + fw->size - sizeof(extension_sig);
fwptr = btrtl_dev->fw_data + btrtl_dev->fw_len - sizeof(extension_sig);
if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
BT_ERR("%s: extension section signature mismatch", hdev->name);
rtl_dev_err(hdev, "extension section signature mismatch\n");
return -EINVAL;
}
@ -166,7 +246,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
* Once we have that, we double-check that that project_id is suitable
* for the hardware we are working with.
*/
while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
while (fwptr >= btrtl_dev->fw_data + (sizeof(*epatch_info) + 3)) {
opcode = *--fwptr;
length = *--fwptr;
data = *--fwptr;
@ -177,8 +257,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
break;
if (length == 0) {
BT_ERR("%s: found instruction with length 0",
hdev->name);
rtl_dev_err(hdev, "found instruction with length 0\n");
return -EINVAL;
}
@ -191,7 +270,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
}
if (project_id < 0) {
BT_ERR("%s: failed to find version instruction", hdev->name);
rtl_dev_err(hdev, "failed to find version instruction\n");
return -EINVAL;
}
@ -202,19 +281,21 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
}
if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
BT_ERR("%s: unknown project id %d", hdev->name, project_id);
rtl_dev_err(hdev, "unknown project id %d\n", project_id);
return -EINVAL;
}
if (lmp_subver != project_id_to_lmp_subver[i].lmp_subver) {
BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
project_id_to_lmp_subver[i].lmp_subver, lmp_subver);
if (btrtl_dev->ic_info->lmp_subver !=
project_id_to_lmp_subver[i].lmp_subver) {
rtl_dev_err(hdev, "firmware is for %x but this is a %x\n",
project_id_to_lmp_subver[i].lmp_subver,
btrtl_dev->ic_info->lmp_subver);
return -EINVAL;
}
epatch_info = (struct rtl_epatch_header *)fw->data;
epatch_info = (struct rtl_epatch_header *)btrtl_dev->fw_data;
if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
BT_ERR("%s: bad EPATCH signature", hdev->name);
rtl_dev_err(hdev, "bad EPATCH signature\n");
return -EINVAL;
}
@ -229,16 +310,16 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
* Find the right patch for this chip.
*/
min_size += 8 * num_patches;
if (fw->size < min_size)
if (btrtl_dev->fw_len < min_size)
return -EINVAL;
chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
chip_id_base = btrtl_dev->fw_data + sizeof(struct rtl_epatch_header);
patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
for (i = 0; i < num_patches; i++) {
u16 chip_id = get_unaligned_le16(chip_id_base +
(i * sizeof(u16)));
if (chip_id == rom_version + 1) {
if (chip_id == btrtl_dev->rom_version + 1) {
patch_length = get_unaligned_le16(patch_length_base +
(i * sizeof(u16)));
patch_offset = get_unaligned_le32(patch_offset_base +
@ -248,21 +329,22 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
}
if (!patch_offset) {
BT_ERR("%s: didn't find patch for chip id %d",
hdev->name, rom_version);
rtl_dev_err(hdev, "didn't find patch for chip id %d",
btrtl_dev->rom_version);
return -EINVAL;
}
BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
min_size = patch_offset + patch_length;
if (fw->size < min_size)
if (btrtl_dev->fw_len < min_size)
return -EINVAL;
/* Copy the firmware into a new buffer and write the version at
* the end.
*/
len = patch_length;
buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
buf = kmemdup(btrtl_dev->fw_data + patch_offset, patch_length,
GFP_KERNEL);
if (!buf)
return -ENOMEM;
@ -301,15 +383,14 @@ static int rtl_download_firmware(struct hci_dev *hdev,
skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: download fw command failed (%ld)",
hdev->name, PTR_ERR(skb));
rtl_dev_err(hdev, "download fw command failed (%ld)\n",
PTR_ERR(skb));
ret = -PTR_ERR(skb);
goto out;
}
if (skb->len != sizeof(struct rtl_download_response)) {
BT_ERR("%s: download fw event length mismatch",
hdev->name);
rtl_dev_err(hdev, "download fw event length mismatch\n");
kfree_skb(skb);
ret = -EIO;
goto out;
@ -324,12 +405,12 @@ out:
return ret;
}
static int rtl_load_config(struct hci_dev *hdev, const char *name, u8 **buff)
static int rtl_load_file(struct hci_dev *hdev, const char *name, u8 **buff)
{
const struct firmware *fw;
int ret;
bt_dev_info(hdev, "rtl: loading %s", name);
rtl_dev_info(hdev, "rtl: loading %s\n", name);
ret = request_firmware(&fw, name, &hdev->dev);
if (ret < 0)
return ret;
@ -343,96 +424,37 @@ static int rtl_load_config(struct hci_dev *hdev, const char *name, u8 **buff)
return ret;
}
static int btrtl_setup_rtl8723a(struct hci_dev *hdev)
static int btrtl_setup_rtl8723a(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev)
{
const struct firmware *fw;
int ret;
bt_dev_info(hdev, "rtl: loading rtl_bt/rtl8723a_fw.bin");
ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &hdev->dev);
if (ret < 0) {
BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
return ret;
}
if (fw->size < 8) {
ret = -EINVAL;
goto out;
}
if (btrtl_dev->fw_len < 8)
return -EINVAL;
/* Check that the firmware doesn't have the epatch signature
* (which is only for RTL8723B and newer).
*/
if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
ret = -EINVAL;
goto out;
}
ret = rtl_download_firmware(hdev, fw->data, fw->size);
out:
release_firmware(fw);
return ret;
}
static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 hci_rev,
u16 lmp_subver)
{
unsigned char *fw_data = NULL;
const struct firmware *fw;
int ret;
int cfg_sz;
u8 *cfg_buff = NULL;
u8 *tbuff;
char *cfg_name = NULL;
char *fw_name = NULL;
int i;
for (i = 0; i < ARRAY_SIZE(ic_id_table); i++) {
if ((ic_id_table[i].match_flags & IC_MATCH_FL_LMPSUBV) &&
(ic_id_table[i].lmp_subver != lmp_subver))
continue;
if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIREV) &&
(ic_id_table[i].hci_rev != hci_rev))
continue;
break;
}
if (i >= ARRAY_SIZE(ic_id_table)) {
BT_ERR("%s: unknown IC info, lmp subver %04x, hci rev %04x",
hdev->name, lmp_subver, hci_rev);
if (!memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE, 8)) {
rtl_dev_err(hdev, "unexpected EPATCH signature!\n");
return -EINVAL;
}
cfg_name = ic_id_table[i].cfg_name;
return rtl_download_firmware(hdev, btrtl_dev->fw_data,
btrtl_dev->fw_len);
}
if (cfg_name) {
cfg_sz = rtl_load_config(hdev, cfg_name, &cfg_buff);
if (cfg_sz < 0) {
cfg_sz = 0;
if (ic_id_table[i].config_needed)
BT_ERR("Necessary config file %s not found\n",
cfg_name);
}
} else
cfg_sz = 0;
static int btrtl_setup_rtl8723b(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev)
{
unsigned char *fw_data = NULL;
int ret;
u8 *tbuff;
fw_name = ic_id_table[i].fw_name;
bt_dev_info(hdev, "rtl: loading %s", fw_name);
ret = request_firmware(&fw, fw_name, &hdev->dev);
if (ret < 0) {
BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
goto err_req_fw;
}
ret = rtlbt_parse_firmware(hdev, lmp_subver, fw, &fw_data);
ret = rtlbt_parse_firmware(hdev, btrtl_dev, &fw_data);
if (ret < 0)
goto out;
if (cfg_sz) {
tbuff = kzalloc(ret + cfg_sz, GFP_KERNEL);
if (btrtl_dev->cfg_len > 0) {
tbuff = kzalloc(ret + btrtl_dev->cfg_len, GFP_KERNEL);
if (!tbuff) {
ret = -ENOMEM;
goto out;
@ -441,22 +463,18 @@ static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 hci_rev,
memcpy(tbuff, fw_data, ret);
kfree(fw_data);
memcpy(tbuff + ret, cfg_buff, cfg_sz);
ret += cfg_sz;
memcpy(tbuff + ret, btrtl_dev->cfg_data, btrtl_dev->cfg_len);
ret += btrtl_dev->cfg_len;
fw_data = tbuff;
}
bt_dev_info(hdev, "cfg_sz %d, total size %d", cfg_sz, ret);
rtl_dev_info(hdev, "cfg_sz %d, total sz %d\n", btrtl_dev->cfg_len, ret);
ret = rtl_download_firmware(hdev, fw_data, ret);
out:
release_firmware(fw);
kfree(fw_data);
err_req_fw:
if (cfg_sz)
kfree(cfg_buff);
return ret;
}
@ -467,14 +485,13 @@ static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev)
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
hdev->name, PTR_ERR(skb));
rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION failed (%ld)\n",
PTR_ERR(skb));
return skb;
}
if (skb->len != sizeof(struct hci_rp_read_local_version)) {
BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
hdev->name);
rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION event length mismatch\n");
kfree_skb(skb);
return ERR_PTR(-EIO);
}
@ -482,49 +499,264 @@ static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev)
return skb;
}
int btrtl_setup_realtek(struct hci_dev *hdev)
void btrtl_free(struct btrtl_device_info *btrtl_dev)
{
kfree(btrtl_dev->fw_data);
kfree(btrtl_dev->cfg_data);
kfree(btrtl_dev);
}
EXPORT_SYMBOL_GPL(btrtl_free);
struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
const char *postfix)
{
struct btrtl_device_info *btrtl_dev;
struct sk_buff *skb;
struct hci_rp_read_local_version *resp;
char cfg_name[40];
u16 hci_rev, lmp_subver;
u8 hci_ver;
int ret;
btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL);
if (!btrtl_dev) {
ret = -ENOMEM;
goto err_alloc;
}
skb = btrtl_read_local_version(hdev);
if (IS_ERR(skb))
return -PTR_ERR(skb);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
goto err_free;
}
resp = (struct hci_rp_read_local_version *)skb->data;
bt_dev_info(hdev, "rtl: examining hci_ver=%02x hci_rev=%04x "
"lmp_ver=%02x lmp_subver=%04x",
resp->hci_ver, resp->hci_rev,
resp->lmp_ver, resp->lmp_subver);
rtl_dev_info(hdev, "rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x lmp_subver=%04x\n",
resp->hci_ver, resp->hci_rev,
resp->lmp_ver, resp->lmp_subver);
hci_ver = resp->hci_ver;
hci_rev = le16_to_cpu(resp->hci_rev);
lmp_subver = le16_to_cpu(resp->lmp_subver);
kfree_skb(skb);
btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
hdev->bus);
if (!btrtl_dev->ic_info) {
rtl_dev_err(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x",
lmp_subver, hci_rev, hci_ver);
ret = -EINVAL;
goto err_free;
}
if (btrtl_dev->ic_info->has_rom_version) {
ret = rtl_read_rom_version(hdev, &btrtl_dev->rom_version);
if (ret)
goto err_free;
}
btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
&btrtl_dev->fw_data);
if (btrtl_dev->fw_len < 0) {
rtl_dev_err(hdev, "firmware file %s not found\n",
btrtl_dev->ic_info->fw_name);
ret = btrtl_dev->fw_len;
goto err_free;
}
if (btrtl_dev->ic_info->cfg_name) {
if (postfix) {
snprintf(cfg_name, sizeof(cfg_name), "%s-%s.bin",
btrtl_dev->ic_info->cfg_name, postfix);
} else {
snprintf(cfg_name, sizeof(cfg_name), "%s.bin",
btrtl_dev->ic_info->cfg_name);
}
btrtl_dev->cfg_len = rtl_load_file(hdev, cfg_name,
&btrtl_dev->cfg_data);
if (btrtl_dev->ic_info->config_needed &&
btrtl_dev->cfg_len <= 0) {
rtl_dev_err(hdev, "mandatory config file %s not found\n",
btrtl_dev->ic_info->cfg_name);
ret = btrtl_dev->cfg_len;
goto err_free;
}
}
return btrtl_dev;
err_free:
btrtl_free(btrtl_dev);
err_alloc:
return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(btrtl_initialize);
int btrtl_download_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev)
{
/* Match a set of subver values that correspond to stock firmware,
* which is not compatible with standard btusb.
* If matched, upload an alternative firmware that does conform to
* standard btusb. Once that firmware is uploaded, the subver changes
* to a different value.
*/
switch (lmp_subver) {
switch (btrtl_dev->ic_info->lmp_subver) {
case RTL_ROM_LMP_8723A:
case RTL_ROM_LMP_3499:
return btrtl_setup_rtl8723a(hdev);
return btrtl_setup_rtl8723a(hdev, btrtl_dev);
case RTL_ROM_LMP_8723B:
case RTL_ROM_LMP_8821A:
case RTL_ROM_LMP_8761A:
case RTL_ROM_LMP_8822B:
return btrtl_setup_rtl8723b(hdev, hci_rev, lmp_subver);
return btrtl_setup_rtl8723b(hdev, btrtl_dev);
default:
bt_dev_info(hdev, "rtl: assuming no firmware upload needed");
rtl_dev_info(hdev, "rtl: assuming no firmware upload needed\n");
return 0;
}
}
EXPORT_SYMBOL_GPL(btrtl_download_firmware);
int btrtl_setup_realtek(struct hci_dev *hdev)
{
struct btrtl_device_info *btrtl_dev;
int ret;
btrtl_dev = btrtl_initialize(hdev, NULL);
if (IS_ERR(btrtl_dev))
return PTR_ERR(btrtl_dev);
ret = btrtl_download_firmware(hdev, btrtl_dev);
btrtl_free(btrtl_dev);
return ret;
}
EXPORT_SYMBOL_GPL(btrtl_setup_realtek);
static unsigned int btrtl_convert_baudrate(u32 device_baudrate)
{
switch (device_baudrate) {
case 0x0252a00a:
return 230400;
case 0x05f75004:
return 921600;
case 0x00005004:
return 1000000;
case 0x04928002:
case 0x01128002:
return 1500000;
case 0x00005002:
return 2000000;
case 0x0000b001:
return 2500000;
case 0x04928001:
return 3000000;
case 0x052a6001:
return 3500000;
case 0x00005001:
return 4000000;
case 0x0252c014:
default:
return 115200;
}
}
int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
u32 *device_baudrate, bool *flow_control)
{
struct rtl_vendor_config *config;
struct rtl_vendor_config_entry *entry;
int i, total_data_len;
bool found = false;
total_data_len = btrtl_dev->cfg_len - sizeof(*config);
if (total_data_len <= 0) {
rtl_dev_warn(hdev, "no config loaded\n");
return -EINVAL;
}
config = (struct rtl_vendor_config *)btrtl_dev->cfg_data;
if (le32_to_cpu(config->signature) != RTL_CONFIG_MAGIC) {
rtl_dev_err(hdev, "invalid config magic\n");
return -EINVAL;
}
if (total_data_len < le16_to_cpu(config->total_len)) {
rtl_dev_err(hdev, "config is too short\n");
return -EINVAL;
}
for (i = 0; i < total_data_len; ) {
entry = ((void *)config->entry) + i;
switch (le16_to_cpu(entry->offset)) {
case 0xc:
if (entry->len < sizeof(*device_baudrate)) {
rtl_dev_err(hdev, "invalid UART config entry\n");
return -EINVAL;
}
*device_baudrate = get_unaligned_le32(entry->data);
*controller_baudrate = btrtl_convert_baudrate(
*device_baudrate);
if (entry->len >= 13)
*flow_control = !!(entry->data[12] & BIT(2));
else
*flow_control = false;
found = true;
break;
default:
rtl_dev_dbg(hdev, "skipping config entry 0x%x (len %u)\n",
le16_to_cpu(entry->offset), entry->len);
break;
};
i += sizeof(*entry) + entry->len;
}
if (!found) {
rtl_dev_err(hdev, "no UART config entry found\n");
return -ENOENT;
}
rtl_dev_dbg(hdev, "device baudrate = 0x%08x\n", *device_baudrate);
rtl_dev_dbg(hdev, "controller baudrate = %u\n", *controller_baudrate);
rtl_dev_dbg(hdev, "flow control %d\n", *flow_control);
return 0;
}
EXPORT_SYMBOL_GPL(btrtl_get_uart_settings);
MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin");

View File

@ -17,6 +17,13 @@
#define RTL_FRAG_LEN 252
#define rtl_dev_err(dev, fmt, ...) bt_dev_err(dev, "RTL: " fmt, ##__VA_ARGS__)
#define rtl_dev_warn(dev, fmt, ...) bt_dev_warn(dev, "RTL: " fmt, ##__VA_ARGS__)
#define rtl_dev_info(dev, fmt, ...) bt_dev_info(dev, "RTL: " fmt, ##__VA_ARGS__)
#define rtl_dev_dbg(dev, fmt, ...) bt_dev_dbg(dev, "RTL: " fmt, ##__VA_ARGS__)
struct btrtl_device_info;
struct rtl_download_cmd {
__u8 index;
__u8 data[RTL_FRAG_LEN];
@ -38,15 +45,61 @@ struct rtl_epatch_header {
__le16 num_patches;
} __packed;
struct rtl_vendor_config_entry {
__le16 offset;
__u8 len;
__u8 data[0];
} __packed;
struct rtl_vendor_config {
__le32 signature;
__le16 total_len;
struct rtl_vendor_config_entry entry[0];
} __packed;
#if IS_ENABLED(CONFIG_BT_RTL)
struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
const char *postfix);
void btrtl_free(struct btrtl_device_info *btrtl_dev);
int btrtl_download_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev);
int btrtl_setup_realtek(struct hci_dev *hdev);
int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
u32 *device_baudrate, bool *flow_control);
#else
static inline struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
const char *postfix)
{
return ERR_PTR(-EOPNOTSUPP);
}
static inline void btrtl_free(struct btrtl_device_info *btrtl_dev)
{
}
static inline int btrtl_download_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev)
{
return -EOPNOTSUPP;
}
static inline int btrtl_setup_realtek(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
}
static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
u32 *device_baudrate,
bool *flow_control)
{
return -ENOENT;
}
#endif

View File

@ -374,6 +374,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8723DE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
/* Additional Realtek 8821AE Bluetooth devices */
@ -509,9 +510,10 @@ static inline void btusb_free_frags(struct btusb_data *data)
static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
unsigned long flags;
int err = 0;
spin_lock(&data->rxlock);
spin_lock_irqsave(&data->rxlock, flags);
skb = data->evt_skb;
while (count) {
@ -556,7 +558,7 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
}
data->evt_skb = skb;
spin_unlock(&data->rxlock);
spin_unlock_irqrestore(&data->rxlock, flags);
return err;
}
@ -564,9 +566,10 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
unsigned long flags;
int err = 0;
spin_lock(&data->rxlock);
spin_lock_irqsave(&data->rxlock, flags);
skb = data->acl_skb;
while (count) {
@ -613,7 +616,7 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
}
data->acl_skb = skb;
spin_unlock(&data->rxlock);
spin_unlock_irqrestore(&data->rxlock, flags);
return err;
}
@ -621,9 +624,10 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
unsigned long flags;
int err = 0;
spin_lock(&data->rxlock);
spin_lock_irqsave(&data->rxlock, flags);
skb = data->sco_skb;
while (count) {
@ -668,7 +672,7 @@ static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
}
data->sco_skb = skb;
spin_unlock(&data->rxlock);
spin_unlock_irqrestore(&data->rxlock, flags);
return err;
}
@ -1066,6 +1070,7 @@ static void btusb_tx_complete(struct urb *urb)
struct sk_buff *skb = urb->context;
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
struct btusb_data *data = hci_get_drvdata(hdev);
unsigned long flags;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
@ -1079,9 +1084,9 @@ static void btusb_tx_complete(struct urb *urb)
hdev->stat.err_tx++;
done:
spin_lock(&data->txlock);
spin_lock_irqsave(&data->txlock, flags);
data->tx_in_flight--;
spin_unlock(&data->txlock);
spin_unlock_irqrestore(&data->txlock, flags);
kfree(urb->setup_packet);
@ -1593,13 +1598,13 @@ static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
ret = request_firmware(&fw, fwname, &hdev->dev);
if (ret < 0) {
if (ret == -EINVAL) {
BT_ERR("%s Intel firmware file request failed (%d)",
hdev->name, ret);
bt_dev_err(hdev, "Intel firmware file request failed (%d)",
ret);
return NULL;
}
BT_ERR("%s failed to open Intel firmware file: %s(%d)",
hdev->name, fwname, ret);
bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
fwname, ret);
/* If the correct firmware patch file is not found, use the
* default firmware patch file instead
@ -1607,8 +1612,8 @@ static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
ver->hw_platform, ver->hw_variant);
if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
BT_ERR("%s failed to open default Intel fw file: %s",
hdev->name, fwname);
bt_dev_err(hdev, "failed to open default fw file: %s",
fwname);
return NULL;
}
}
@ -1637,7 +1642,7 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
* process.
*/
if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
return -EINVAL;
}
(*fw_ptr)++;
@ -1651,7 +1656,7 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
* of command parameter. If not, the firmware file is corrupted.
*/
if (remain < cmd->plen) {
BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
return -EFAULT;
}
@ -1684,8 +1689,7 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
remain -= sizeof(*evt);
if (remain < evt->plen) {
BT_ERR("%s Intel fw corrupted: invalid evt len",
hdev->name);
bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
return -EFAULT;
}
@ -1699,15 +1703,15 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
* file is corrupted.
*/
if (!evt || !evt_param || remain < 0) {
BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
return -EFAULT;
}
skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
cmd_param, evt->evt, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
hdev->name, cmd->opcode, PTR_ERR(skb));
bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
cmd->opcode, PTR_ERR(skb));
return PTR_ERR(skb);
}
@ -1716,15 +1720,15 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
* the contents of the event.
*/
if (skb->len != evt->plen) {
BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
le16_to_cpu(cmd->opcode));
bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
le16_to_cpu(cmd->opcode));
kfree_skb(skb);
return -EFAULT;
}
if (memcmp(skb->data, evt_param, evt->plen)) {
BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
hdev->name, le16_to_cpu(cmd->opcode));
bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
le16_to_cpu(cmd->opcode));
kfree_skb(skb);
return -EFAULT;
}
@ -1753,8 +1757,8 @@ static int btusb_setup_intel(struct hci_dev *hdev)
*/
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s sending initial HCI reset command failed (%ld)",
hdev->name, PTR_ERR(skb));
bt_dev_err(hdev, "sending initial HCI reset command failed (%ld)",
PTR_ERR(skb));
return PTR_ERR(skb);
}
kfree_skb(skb);
@ -1890,7 +1894,7 @@ static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
struct hci_event_hdr *hdr;
struct hci_ev_cmd_complete *evt;
skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
if (!skb)
return -ENOMEM;
@ -2084,8 +2088,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* for now only accept this single value.
*/
if (ver.hw_platform != 0x37) {
BT_ERR("%s: Unsupported Intel hardware platform (%u)",
hdev->name, ver.hw_platform);
bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
ver.hw_platform);
return -EINVAL;
}
@ -2104,8 +2108,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
case 0x14: /* QnJ, IcP */
break;
default:
BT_ERR("%s: Unsupported Intel hardware variant (%u)",
hdev->name, ver.hw_variant);
bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
ver.hw_variant);
return -EINVAL;
}
@ -2134,8 +2138,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* choice is to return an error and abort the device initialization.
*/
if (ver.fw_variant != 0x06) {
BT_ERR("%s: Unsupported Intel firmware variant (%u)",
hdev->name, ver.fw_variant);
bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
ver.fw_variant);
return -ENODEV;
}
@ -2151,8 +2155,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* that this bootloader does not send them, then abort the setup.
*/
if (params.limited_cce != 0x00) {
BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
hdev->name, params.limited_cce);
bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
params.limited_cce);
return -EINVAL;
}
@ -2202,14 +2206,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
le16_to_cpu(ver.fw_revision));
break;
default:
BT_ERR("%s: Unsupported Intel firmware naming", hdev->name);
bt_dev_err(hdev, "Unsupported Intel firmware naming");
return -EINVAL;
}
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
BT_ERR("%s: Failed to load Intel firmware file (%d)",
hdev->name, err);
bt_dev_err(hdev, "Failed to load Intel firmware file (%d)", err);
return err;
}
@ -2235,13 +2238,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
le16_to_cpu(ver.fw_revision));
break;
default:
BT_ERR("%s: Unsupported Intel firmware naming", hdev->name);
bt_dev_err(hdev, "Unsupported Intel firmware naming");
return -EINVAL;
}
if (fw->size < 644) {
BT_ERR("%s: Invalid size of firmware file (%zu)",
hdev->name, fw->size);
bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
fw->size);
err = -EBADF;
goto done;
}
@ -2272,18 +2275,18 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
TASK_INTERRUPTIBLE,
msecs_to_jiffies(5000));
if (err == -EINTR) {
BT_ERR("%s: Firmware loading interrupted", hdev->name);
bt_dev_err(hdev, "Firmware loading interrupted");
goto done;
}
if (err) {
BT_ERR("%s: Firmware loading timeout", hdev->name);
bt_dev_err(hdev, "Firmware loading timeout");
err = -ETIMEDOUT;
goto done;
}
if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
BT_ERR("%s: Firmware loading failed", hdev->name);
bt_dev_err(hdev, "Firmware loading failed");
err = -ENOEXEC;
goto done;
}
@ -2322,12 +2325,12 @@ done:
msecs_to_jiffies(1000));
if (err == -EINTR) {
BT_ERR("%s: Device boot interrupted", hdev->name);
bt_dev_err(hdev, "Device boot interrupted");
return -EINTR;
}
if (err) {
BT_ERR("%s: Device boot timeout", hdev->name);
bt_dev_err(hdev, "Device boot timeout");
return -ETIMEDOUT;
}
@ -2364,6 +2367,22 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
struct sk_buff *skb;
long ret;
/* In the shutdown sequence where Bluetooth is turned off followed
* by WiFi being turned off, turning WiFi back on causes issue with
* the RF calibration.
*
* To ensure that any RF activity has been stopped, issue HCI Reset
* command to clear all ongoing activity including advertising,
* scanning etc.
*/
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
bt_dev_err(hdev, "HCI reset during shutdown failed");
return ret;
}
kfree_skb(skb);
/* Some platforms have an issue with BT LED when the interface is
* down or BT radio is turned off, which takes 5 seconds to BT LED
* goes off. This command turns off the BT LED immediately.
@ -2371,8 +2390,7 @@ static int btusb_shutdown_intel(struct hci_dev *hdev)
skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: turning off Intel device LED failed (%ld)",
hdev->name, ret);
bt_dev_err(hdev, "turning off Intel device LED failed");
return ret;
}
kfree_skb(skb);

View File

@ -21,13 +21,18 @@
*
*/
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/errno.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
#include <linux/serdev.h>
#include <linux/skbuff.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btrtl.h"
#include "hci_uart.h"
#define HCI_3WIRE_ACK_PKT 0
@ -65,6 +70,9 @@ enum {
};
struct h5 {
/* Must be the first member, hci_serdev.c expects this. */
struct hci_uart serdev_hu;
struct sk_buff_head unack; /* Unack'ed packets queue */
struct sk_buff_head rel; /* Reliable packets queue */
struct sk_buff_head unrel; /* Unreliable packets queue */
@ -95,6 +103,19 @@ struct h5 {
H5_SLEEPING,
H5_WAKING_UP,
} sleep;
const struct h5_vnd *vnd;
const char *id;
struct gpio_desc *enable_gpio;
struct gpio_desc *device_wake_gpio;
};
struct h5_vnd {
int (*setup)(struct h5 *h5);
void (*open)(struct h5 *h5);
void (*close)(struct h5 *h5);
const struct acpi_gpio_mapping *acpi_gpio_map;
};
static void h5_reset_rx(struct h5 *h5);
@ -193,9 +214,13 @@ static int h5_open(struct hci_uart *hu)
BT_DBG("hu %p", hu);
h5 = kzalloc(sizeof(*h5), GFP_KERNEL);
if (!h5)
return -ENOMEM;
if (hu->serdev) {
h5 = serdev_device_get_drvdata(hu->serdev);
} else {
h5 = kzalloc(sizeof(*h5), GFP_KERNEL);
if (!h5)
return -ENOMEM;
}
hu->priv = h5;
h5->hu = hu;
@ -210,6 +235,9 @@ static int h5_open(struct hci_uart *hu)
h5->tx_win = H5_TX_WIN_MAX;
if (h5->vnd && h5->vnd->open)
h5->vnd->open(h5);
set_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags);
/* Send initial sync request */
@ -229,7 +257,21 @@ static int h5_close(struct hci_uart *hu)
skb_queue_purge(&h5->rel);
skb_queue_purge(&h5->unrel);
kfree(h5);
if (h5->vnd && h5->vnd->close)
h5->vnd->close(h5);
if (!hu->serdev)
kfree(h5);
return 0;
}
static int h5_setup(struct hci_uart *hu)
{
struct h5 *h5 = hu->priv;
if (h5->vnd && h5->vnd->setup)
return h5->vnd->setup(h5);
return 0;
}
@ -744,18 +786,172 @@ static const struct hci_uart_proto h5p = {
.name = "Three-wire (H5)",
.open = h5_open,
.close = h5_close,
.setup = h5_setup,
.recv = h5_recv,
.enqueue = h5_enqueue,
.dequeue = h5_dequeue,
.flush = h5_flush,
};
static int h5_serdev_probe(struct serdev_device *serdev)
{
const struct acpi_device_id *match;
struct device *dev = &serdev->dev;
struct h5 *h5;
h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL);
if (!h5)
return -ENOMEM;
set_bit(HCI_UART_RESET_ON_INIT, &h5->serdev_hu.flags);
h5->hu = &h5->serdev_hu;
h5->serdev_hu.serdev = serdev;
serdev_device_set_drvdata(serdev, h5);
if (has_acpi_companion(dev)) {
match = acpi_match_device(dev->driver->acpi_match_table, dev);
if (!match)
return -ENODEV;
h5->vnd = (const struct h5_vnd *)match->driver_data;
h5->id = (char *)match->id;
if (h5->vnd->acpi_gpio_map)
devm_acpi_dev_add_driver_gpios(dev,
h5->vnd->acpi_gpio_map);
}
h5->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(h5->enable_gpio))
return PTR_ERR(h5->enable_gpio);
h5->device_wake_gpio = devm_gpiod_get_optional(dev, "device-wake",
GPIOD_OUT_LOW);
if (IS_ERR(h5->device_wake_gpio))
return PTR_ERR(h5->device_wake_gpio);
return hci_uart_register_device(&h5->serdev_hu, &h5p);
}
static void h5_serdev_remove(struct serdev_device *serdev)
{
struct h5 *h5 = serdev_device_get_drvdata(serdev);
hci_uart_unregister_device(&h5->serdev_hu);
}
#ifdef CONFIG_BT_HCIUART_RTL
static int h5_btrtl_setup(struct h5 *h5)
{
struct btrtl_device_info *btrtl_dev;
struct sk_buff *skb;
__le32 baudrate_data;
u32 device_baudrate;
unsigned int controller_baudrate;
bool flow_control;
int err;
btrtl_dev = btrtl_initialize(h5->hu->hdev, h5->id);
if (IS_ERR(btrtl_dev))
return PTR_ERR(btrtl_dev);
err = btrtl_get_uart_settings(h5->hu->hdev, btrtl_dev,
&controller_baudrate, &device_baudrate,
&flow_control);
if (err)
goto out_free;
baudrate_data = cpu_to_le32(device_baudrate);
skb = __hci_cmd_sync(h5->hu->hdev, 0xfc17, sizeof(baudrate_data),
&baudrate_data, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
rtl_dev_err(h5->hu->hdev, "set baud rate command failed\n");
err = PTR_ERR(skb);
goto out_free;
} else {
kfree_skb(skb);
}
/* Give the device some time to set up the new baudrate. */
usleep_range(10000, 20000);
serdev_device_set_baudrate(h5->hu->serdev, controller_baudrate);
serdev_device_set_flow_control(h5->hu->serdev, flow_control);
err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev);
/* Give the device some time before the hci-core sends it a reset */
usleep_range(10000, 20000);
out_free:
btrtl_free(btrtl_dev);
return err;
}
static void h5_btrtl_open(struct h5 *h5)
{
/* Devices always start with these fixed parameters */
serdev_device_set_flow_control(h5->hu->serdev, false);
serdev_device_set_parity(h5->hu->serdev, SERDEV_PARITY_EVEN);
serdev_device_set_baudrate(h5->hu->serdev, 115200);
/* The controller needs up to 500ms to wakeup */
gpiod_set_value_cansleep(h5->enable_gpio, 1);
gpiod_set_value_cansleep(h5->device_wake_gpio, 1);
msleep(500);
}
static void h5_btrtl_close(struct h5 *h5)
{
gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
gpiod_set_value_cansleep(h5->enable_gpio, 0);
}
static const struct acpi_gpio_params btrtl_device_wake_gpios = { 0, 0, false };
static const struct acpi_gpio_params btrtl_enable_gpios = { 1, 0, false };
static const struct acpi_gpio_params btrtl_host_wake_gpios = { 2, 0, false };
static const struct acpi_gpio_mapping acpi_btrtl_gpios[] = {
{ "device-wake-gpios", &btrtl_device_wake_gpios, 1 },
{ "enable-gpios", &btrtl_enable_gpios, 1 },
{ "host-wake-gpios", &btrtl_host_wake_gpios, 1 },
{},
};
static struct h5_vnd rtl_vnd = {
.setup = h5_btrtl_setup,
.open = h5_btrtl_open,
.close = h5_btrtl_close,
.acpi_gpio_map = acpi_btrtl_gpios,
};
#endif
#ifdef CONFIG_ACPI
static const struct acpi_device_id h5_acpi_match[] = {
#ifdef CONFIG_BT_HCIUART_RTL
{ "OBDA8723", (kernel_ulong_t)&rtl_vnd },
#endif
{ },
};
MODULE_DEVICE_TABLE(acpi, h5_acpi_match);
#endif
static struct serdev_device_driver h5_serdev_driver = {
.probe = h5_serdev_probe,
.remove = h5_serdev_remove,
.driver = {
.name = "hci_uart_h5",
.acpi_match_table = ACPI_PTR(h5_acpi_match),
},
};
int __init h5_init(void)
{
serdev_device_driver_register(&h5_serdev_driver);
return hci_uart_register_proto(&h5p);
}
int __exit h5_deinit(void)
{
serdev_device_driver_unregister(&h5_serdev_driver);
return hci_uart_unregister_proto(&h5p);
}

View File

@ -458,7 +458,7 @@ static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
struct hci_event_hdr *hdr;
struct hci_ev_cmd_complete *evt;
skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
if (!skb)
return -ENOMEM;

View File

@ -5,7 +5,7 @@
* protocol extension to H4.
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Copyright (c) 2010, 2012 The Linux Foundation. All rights reserved.
* Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
*
* Acknowledgements:
* This file is based on hci_ll.c, which was...
@ -31,9 +31,14 @@
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/serdev.h>
#include <net/bluetooth/bluetooth.h>
@ -119,12 +124,51 @@ struct qca_data {
u64 votes_off;
};
enum qca_speed_type {
QCA_INIT_SPEED = 1,
QCA_OPER_SPEED
};
/*
* Voltage regulator information required for configuring the
* QCA Bluetooth chipset
*/
struct qca_vreg {
const char *name;
unsigned int min_uV;
unsigned int max_uV;
unsigned int load_uA;
};
struct qca_vreg_data {
enum qca_btsoc_type soc_type;
struct qca_vreg *vregs;
size_t num_vregs;
};
/*
* Platform data for the QCA Bluetooth power driver.
*/
struct qca_power {
struct device *dev;
const struct qca_vreg_data *vreg_data;
struct regulator_bulk_data *vreg_bulk;
bool vregs_on;
};
struct qca_serdev {
struct hci_uart serdev_hu;
struct gpio_desc *bt_en;
struct clk *susclk;
enum qca_btsoc_type btsoc_type;
struct qca_power *bt_power;
u32 init_speed;
u32 oper_speed;
};
static int qca_power_setup(struct hci_uart *hu, bool on);
static void qca_power_shutdown(struct hci_dev *hdev);
static void __serial_clock_on(struct tty_struct *tty)
{
/* TODO: Some chipset requires to enable UART clock on client
@ -402,10 +446,11 @@ static int qca_open(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
struct qca_data *qca;
int ret;
BT_DBG("hu %p qca_open", hu);
qca = kzalloc(sizeof(struct qca_data), GFP_ATOMIC);
qca = kzalloc(sizeof(struct qca_data), GFP_KERNEL);
if (!qca)
return -ENOMEM;
@ -453,19 +498,32 @@ static int qca_open(struct hci_uart *hu)
hu->priv = qca;
if (hu->serdev) {
serdev_device_open(hu->serdev);
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->btsoc_type != QCA_WCN3990) {
gpiod_set_value_cansleep(qcadev->bt_en, 1);
} else {
hu->init_speed = qcadev->init_speed;
hu->oper_speed = qcadev->oper_speed;
ret = qca_power_setup(hu, true);
if (ret) {
destroy_workqueue(qca->workqueue);
kfree_skb(qca->rx_skb);
hu->priv = NULL;
kfree(qca);
return ret;
}
}
}
timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
if (hu->serdev) {
serdev_device_open(hu->serdev);
qcadev = serdev_device_get_drvdata(hu->serdev);
gpiod_set_value_cansleep(qcadev->bt_en, 1);
}
BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
qca->tx_idle_delay, qca->wake_retrans);
@ -549,10 +607,13 @@ static int qca_close(struct hci_uart *hu)
qca->hu = NULL;
if (hu->serdev) {
serdev_device_close(hu->serdev);
qcadev = serdev_device_get_drvdata(hu->serdev);
gpiod_set_value_cansleep(qcadev->bt_en, 0);
if (qcadev->btsoc_type == QCA_WCN3990)
qca_power_shutdown(hu->hdev);
else
gpiod_set_value_cansleep(qcadev->bt_en, 0);
serdev_device_close(hu->serdev);
}
kfree_skb(qca->rx_skb);
@ -872,6 +933,8 @@ static uint8_t qca_get_baudrate_value(int speed)
return QCA_BAUDRATE_2000000;
case 3000000:
return QCA_BAUDRATE_3000000;
case 3200000:
return QCA_BAUDRATE_3200000;
case 3500000:
return QCA_BAUDRATE_3500000;
default:
@ -884,19 +947,27 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
struct sk_buff *skb;
struct qca_serdev *qcadev;
u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
if (baudrate > QCA_BAUDRATE_3000000)
if (baudrate > QCA_BAUDRATE_3200000)
return -EINVAL;
cmd[4] = baudrate;
skb = bt_skb_alloc(sizeof(cmd), GFP_ATOMIC);
skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
if (!skb) {
bt_dev_err(hdev, "Failed to allocate baudrate packet");
return -ENOMEM;
}
/* Disabling hardware flow control is mandatory while
* sending change baudrate request to wcn3990 SoC.
*/
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->btsoc_type == QCA_WCN3990)
hci_uart_set_flow_control(hu, true);
/* Assign commands to change baudrate and packet type. */
skb_put_data(skb, cmd, sizeof(cmd));
hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
@ -912,6 +983,9 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
set_current_state(TASK_RUNNING);
if (qcadev->btsoc_type == QCA_WCN3990)
hci_uart_set_flow_control(hu, false);
return 0;
}
@ -923,50 +997,195 @@ static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
hci_uart_set_baudrate(hu, speed);
}
static int qca_send_power_pulse(struct hci_dev *hdev, u8 cmd)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
struct sk_buff *skb;
/* These power pulses are single byte command which are sent
* at required baudrate to wcn3990. On wcn3990, we have an external
* circuit at Tx pin which decodes the pulse sent at specific baudrate.
* For example, wcn3990 supports RF COEX antenna for both Wi-Fi/BT
* and also we use the same power inputs to turn on and off for
* Wi-Fi/BT. Powering up the power sources will not enable BT, until
* we send a power on pulse at 115200 bps. This algorithm will help to
* save power. Disabling hardware flow control is mandatory while
* sending power pulses to SoC.
*/
bt_dev_dbg(hdev, "sending power pulse %02x to SoC", cmd);
skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
if (!skb)
return -ENOMEM;
hci_uart_set_flow_control(hu, true);
skb_put_u8(skb, cmd);
hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
skb_queue_tail(&qca->txq, skb);
hci_uart_tx_wakeup(hu);
/* Wait for 100 uS for SoC to settle down */
usleep_range(100, 200);
hci_uart_set_flow_control(hu, false);
return 0;
}
static unsigned int qca_get_speed(struct hci_uart *hu,
enum qca_speed_type speed_type)
{
unsigned int speed = 0;
if (speed_type == QCA_INIT_SPEED) {
if (hu->init_speed)
speed = hu->init_speed;
else if (hu->proto->init_speed)
speed = hu->proto->init_speed;
} else {
if (hu->oper_speed)
speed = hu->oper_speed;
else if (hu->proto->oper_speed)
speed = hu->proto->oper_speed;
}
return speed;
}
static int qca_check_speeds(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->btsoc_type == QCA_WCN3990) {
if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
!qca_get_speed(hu, QCA_OPER_SPEED))
return -EINVAL;
} else {
if (!qca_get_speed(hu, QCA_INIT_SPEED) ||
!qca_get_speed(hu, QCA_OPER_SPEED))
return -EINVAL;
}
return 0;
}
static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
{
unsigned int speed, qca_baudrate;
int ret;
if (speed_type == QCA_INIT_SPEED) {
speed = qca_get_speed(hu, QCA_INIT_SPEED);
if (speed)
host_set_baudrate(hu, speed);
} else {
speed = qca_get_speed(hu, QCA_OPER_SPEED);
if (!speed)
return 0;
qca_baudrate = qca_get_baudrate_value(speed);
bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
ret = qca_set_baudrate(hu->hdev, qca_baudrate);
if (ret)
return ret;
host_set_baudrate(hu, speed);
}
return 0;
}
static int qca_wcn3990_init(struct hci_uart *hu)
{
struct hci_dev *hdev = hu->hdev;
int ret;
/* Forcefully enable wcn3990 to enter in to boot mode. */
host_set_baudrate(hu, 2400);
ret = qca_send_power_pulse(hdev, QCA_WCN3990_POWEROFF_PULSE);
if (ret)
return ret;
qca_set_speed(hu, QCA_INIT_SPEED);
ret = qca_send_power_pulse(hdev, QCA_WCN3990_POWERON_PULSE);
if (ret)
return ret;
/* Wait for 100 ms for SoC to boot */
msleep(100);
/* Now the device is in ready state to communicate with host.
* To sync host with device we need to reopen port.
* Without this, we will have RTS and CTS synchronization
* issues.
*/
serdev_device_close(hu->serdev);
ret = serdev_device_open(hu->serdev);
if (ret) {
bt_dev_err(hu->hdev, "failed to open port");
return ret;
}
hci_uart_set_flow_control(hu, false);
return 0;
}
static int qca_setup(struct hci_uart *hu)
{
struct hci_dev *hdev = hu->hdev;
struct qca_data *qca = hu->priv;
unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
struct qca_serdev *qcadev;
int ret;
int soc_ver = 0;
bt_dev_info(hdev, "ROME setup");
qcadev = serdev_device_get_drvdata(hu->serdev);
ret = qca_check_speeds(hu);
if (ret)
return ret;
/* Patch downloading has to be done without IBS mode */
clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
/* Setup initial baudrate */
speed = 0;
if (hu->init_speed)
speed = hu->init_speed;
else if (hu->proto->init_speed)
speed = hu->proto->init_speed;
if (speed)
host_set_baudrate(hu, speed);
/* Setup user speed if needed */
speed = 0;
if (hu->oper_speed)
speed = hu->oper_speed;
else if (hu->proto->oper_speed)
speed = hu->proto->oper_speed;
if (speed) {
qca_baudrate = qca_get_baudrate_value(speed);
bt_dev_info(hdev, "Set UART speed to %d", speed);
ret = qca_set_baudrate(hdev, qca_baudrate);
if (ret) {
bt_dev_err(hdev, "Failed to change the baud rate (%d)",
ret);
if (qcadev->btsoc_type == QCA_WCN3990) {
bt_dev_info(hdev, "setting up wcn3990");
ret = qca_wcn3990_init(hu);
if (ret)
return ret;
}
host_set_baudrate(hu, speed);
ret = qca_read_soc_version(hdev, &soc_ver);
if (ret)
return ret;
} else {
bt_dev_info(hdev, "ROME setup");
qca_set_speed(hu, QCA_INIT_SPEED);
}
/* Setup user speed if needed */
speed = qca_get_speed(hu, QCA_OPER_SPEED);
if (speed) {
ret = qca_set_speed(hu, QCA_OPER_SPEED);
if (ret)
return ret;
qca_baudrate = qca_get_baudrate_value(speed);
}
if (qcadev->btsoc_type != QCA_WCN3990) {
/* Get QCA version information */
ret = qca_read_soc_version(hdev, &soc_ver);
if (ret)
return ret;
}
bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
/* Setup patch / NVM configurations */
ret = qca_uart_setup_rome(hdev, qca_baudrate);
ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
if (!ret) {
set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
@ -1002,9 +1221,123 @@ static struct hci_uart_proto qca_proto = {
.dequeue = qca_dequeue,
};
static const struct qca_vreg_data qca_soc_data = {
.soc_type = QCA_WCN3990,
.vregs = (struct qca_vreg []) {
{ "vddio", 1800000, 1900000, 15000 },
{ "vddxo", 1800000, 1900000, 80000 },
{ "vddrf", 1300000, 1350000, 300000 },
{ "vddch0", 3300000, 3400000, 450000 },
},
.num_vregs = 4,
};
static void qca_power_shutdown(struct hci_dev *hdev)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hdev, QCA_WCN3990_POWEROFF_PULSE);
qca_power_setup(hu, false);
}
static int qca_enable_regulator(struct qca_vreg vregs,
struct regulator *regulator)
{
int ret;
ret = regulator_set_voltage(regulator, vregs.min_uV,
vregs.max_uV);
if (ret)
return ret;
if (vregs.load_uA)
ret = regulator_set_load(regulator,
vregs.load_uA);
if (ret)
return ret;
return regulator_enable(regulator);
}
static void qca_disable_regulator(struct qca_vreg vregs,
struct regulator *regulator)
{
regulator_disable(regulator);
regulator_set_voltage(regulator, 0, vregs.max_uV);
if (vregs.load_uA)
regulator_set_load(regulator, 0);
}
static int qca_power_setup(struct hci_uart *hu, bool on)
{
struct qca_vreg *vregs;
struct regulator_bulk_data *vreg_bulk;
struct qca_serdev *qcadev;
int i, num_vregs, ret = 0;
qcadev = serdev_device_get_drvdata(hu->serdev);
if (!qcadev || !qcadev->bt_power || !qcadev->bt_power->vreg_data ||
!qcadev->bt_power->vreg_bulk)
return -EINVAL;
vregs = qcadev->bt_power->vreg_data->vregs;
vreg_bulk = qcadev->bt_power->vreg_bulk;
num_vregs = qcadev->bt_power->vreg_data->num_vregs;
BT_DBG("on: %d", on);
if (on && !qcadev->bt_power->vregs_on) {
for (i = 0; i < num_vregs; i++) {
ret = qca_enable_regulator(vregs[i],
vreg_bulk[i].consumer);
if (ret)
break;
}
if (ret) {
BT_ERR("failed to enable regulator:%s", vregs[i].name);
/* turn off regulators which are enabled */
for (i = i - 1; i >= 0; i--)
qca_disable_regulator(vregs[i],
vreg_bulk[i].consumer);
} else {
qcadev->bt_power->vregs_on = true;
}
} else if (!on && qcadev->bt_power->vregs_on) {
/* turn off regulator in reverse order */
i = qcadev->bt_power->vreg_data->num_vregs - 1;
for ( ; i >= 0; i--)
qca_disable_regulator(vregs[i], vreg_bulk[i].consumer);
qcadev->bt_power->vregs_on = false;
}
return ret;
}
static int qca_init_regulators(struct qca_power *qca,
const struct qca_vreg *vregs, size_t num_vregs)
{
int i;
qca->vreg_bulk = devm_kzalloc(qca->dev, num_vregs *
sizeof(struct regulator_bulk_data),
GFP_KERNEL);
if (!qca->vreg_bulk)
return -ENOMEM;
for (i = 0; i < num_vregs; i++)
qca->vreg_bulk[i].supply = vregs[i].name;
return devm_regulator_bulk_get(qca->dev, num_vregs, qca->vreg_bulk);
}
static int qca_serdev_probe(struct serdev_device *serdev)
{
struct qca_serdev *qcadev;
const struct qca_vreg_data *data;
int err;
qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
@ -1012,47 +1345,84 @@ static int qca_serdev_probe(struct serdev_device *serdev)
return -ENOMEM;
qcadev->serdev_hu.serdev = serdev;
data = of_device_get_match_data(&serdev->dev);
serdev_device_set_drvdata(serdev, qcadev);
if (data && data->soc_type == QCA_WCN3990) {
qcadev->btsoc_type = QCA_WCN3990;
qcadev->bt_power = devm_kzalloc(&serdev->dev,
sizeof(struct qca_power),
GFP_KERNEL);
if (!qcadev->bt_power)
return -ENOMEM;
qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(qcadev->bt_en)) {
dev_err(&serdev->dev, "failed to acquire enable gpio\n");
return PTR_ERR(qcadev->bt_en);
qcadev->bt_power->dev = &serdev->dev;
qcadev->bt_power->vreg_data = data;
err = qca_init_regulators(qcadev->bt_power, data->vregs,
data->num_vregs);
if (err) {
BT_ERR("Failed to init regulators:%d", err);
goto out;
}
qcadev->bt_power->vregs_on = false;
device_property_read_u32(&serdev->dev, "max-speed",
&qcadev->oper_speed);
if (!qcadev->oper_speed)
BT_DBG("UART will pick default operating speed");
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err) {
BT_ERR("wcn3990 serdev registration failed");
goto out;
}
} else {
qcadev->btsoc_type = QCA_ROME;
qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(qcadev->bt_en)) {
dev_err(&serdev->dev, "failed to acquire enable gpio\n");
return PTR_ERR(qcadev->bt_en);
}
qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
dev_err(&serdev->dev, "failed to acquire clk\n");
return PTR_ERR(qcadev->susclk);
}
err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
if (err)
return err;
err = clk_prepare_enable(qcadev->susclk);
if (err)
return err;
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err)
clk_disable_unprepare(qcadev->susclk);
}
qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
dev_err(&serdev->dev, "failed to acquire clk\n");
return PTR_ERR(qcadev->susclk);
}
out: return err;
err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
if (err)
return err;
err = clk_prepare_enable(qcadev->susclk);
if (err)
return err;
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err)
clk_disable_unprepare(qcadev->susclk);
return err;
}
static void qca_serdev_remove(struct serdev_device *serdev)
{
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
hci_uart_unregister_device(&qcadev->serdev_hu);
if (qcadev->btsoc_type == QCA_WCN3990)
qca_power_shutdown(qcadev->serdev_hu.hdev);
else
clk_disable_unprepare(qcadev->susclk);
clk_disable_unprepare(qcadev->susclk);
hci_uart_unregister_device(&qcadev->serdev_hu);
}
static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,qca6174-bt" },
{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);

View File

@ -19,6 +19,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/list.h>
@ -239,7 +240,7 @@ void cn_del_callback(struct cb_id *id)
}
EXPORT_SYMBOL_GPL(cn_del_callback);
static int cn_proc_show(struct seq_file *m, void *v)
static int __maybe_unused cn_proc_show(struct seq_file *m, void *v)
{
struct cn_queue_dev *dev = cdev.cbdev;
struct cn_callback_entry *cbq;

View File

@ -1673,7 +1673,7 @@ static void chtls_timewait(struct sock *sk)
struct tcp_sock *tp = tcp_sk(sk);
tp->rcv_nxt++;
tp->rx_opt.ts_recent_stamp = get_seconds();
tp->rx_opt.ts_recent_stamp = ktime_get_seconds();
tp->srtt_us = 0;
tcp_time_wait(sk, TCP_TIME_WAIT, 0);
}

View File

@ -146,7 +146,7 @@ static void virtcrypto_clean_affinity(struct virtio_crypto *vi, long hcpu)
if (vi->affinity_hint_set) {
for (i = 0; i < vi->max_data_queues; i++)
virtqueue_set_affinity(vi->data_vq[i].vq, -1);
virtqueue_set_affinity(vi->data_vq[i].vq, NULL);
vi->affinity_hint_set = false;
}
@ -173,7 +173,7 @@ static void virtcrypto_set_affinity(struct virtio_crypto *vcrypto)
*
*/
for_each_online_cpu(cpu) {
virtqueue_set_affinity(vcrypto->data_vq[i].vq, cpu);
virtqueue_set_affinity(vcrypto->data_vq[i].vq, cpumask_of(cpu));
if (++i >= vcrypto->max_data_queues)
break;
}

View File

@ -394,12 +394,16 @@ static const char * const hwmon_power_attr_templates[] = {
[hwmon_power_cap_hyst] = "power%d_cap_hyst",
[hwmon_power_cap_max] = "power%d_cap_max",
[hwmon_power_cap_min] = "power%d_cap_min",
[hwmon_power_min] = "power%d_min",
[hwmon_power_max] = "power%d_max",
[hwmon_power_lcrit] = "power%d_lcrit",
[hwmon_power_crit] = "power%d_crit",
[hwmon_power_label] = "power%d_label",
[hwmon_power_alarm] = "power%d_alarm",
[hwmon_power_cap_alarm] = "power%d_cap_alarm",
[hwmon_power_min_alarm] = "power%d_min_alarm",
[hwmon_power_max_alarm] = "power%d_max_alarm",
[hwmon_power_lcrit_alarm] = "power%d_lcrit_alarm",
[hwmon_power_crit_alarm] = "power%d_crit_alarm",
};

View File

@ -423,7 +423,7 @@ tx_finish:
static u16 hfi1_vnic_select_queue(struct net_device *netdev,
struct sk_buff *skb,
void *accel_priv,
struct net_device *sb_dev,
select_queue_fallback_t fallback)
{
struct hfi1_vnic_vport_info *vinfo = opa_vnic_dev_priv(netdev);

View File

@ -1,5 +1,5 @@
config MLX5_INFINIBAND
tristate "Mellanox Connect-IB HCA support"
tristate "Mellanox 5th generation network adapters (ConnectX series) support"
depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
depends on INFINIBAND_USER_ACCESS || INFINIBAND_USER_ACCESS=n
---help---

View File

@ -32,6 +32,21 @@
#include "cmd.h"
int mlx5_cmd_dump_fill_mkey(struct mlx5_core_dev *dev, u32 *mkey)
{
u32 out[MLX5_ST_SZ_DW(query_special_contexts_out)] = {0};
u32 in[MLX5_ST_SZ_DW(query_special_contexts_in)] = {0};
int err;
MLX5_SET(query_special_contexts_in, in, opcode,
MLX5_CMD_OP_QUERY_SPECIAL_CONTEXTS);
err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
if (!err)
*mkey = MLX5_GET(query_special_contexts_out, out,
dump_fill_mkey);
return err;
}
int mlx5_cmd_null_mkey(struct mlx5_core_dev *dev, u32 *null_mkey)
{
u32 out[MLX5_ST_SZ_DW(query_special_contexts_out)] = {};

View File

@ -37,6 +37,7 @@
#include <linux/kernel.h>
#include <linux/mlx5/driver.h>
int mlx5_cmd_dump_fill_mkey(struct mlx5_core_dev *dev, u32 *mkey);
int mlx5_cmd_null_mkey(struct mlx5_core_dev *dev, u32 *null_mkey);
int mlx5_cmd_query_cong_params(struct mlx5_core_dev *dev, int cong_point,
void *out, int out_size);

View File

@ -95,7 +95,7 @@ static netdev_tx_t opa_netdev_start_xmit(struct sk_buff *skb,
}
static u16 opa_vnic_select_queue(struct net_device *netdev, struct sk_buff *skb,
void *accel_priv,
struct net_device *sb_dev,
select_queue_fallback_t fallback)
{
struct opa_vnic_adapter *adapter = opa_vnic_priv(netdev);
@ -107,7 +107,7 @@ static u16 opa_vnic_select_queue(struct net_device *netdev, struct sk_buff *skb,
mdata->entropy = opa_vnic_calc_entropy(skb);
mdata->vl = opa_vnic_get_vl(adapter, skb);
rc = adapter->rn_ops->ndo_select_queue(netdev, skb,
accel_priv, fallback);
sb_dev, fallback);
skb_pull(skb, sizeof(*mdata));
return rc;
}

View File

@ -9,6 +9,7 @@
*
*/
#include <linux/compiler.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
@ -1321,7 +1322,7 @@ static inline void capinc_tty_exit(void) { }
* /proc/capi/capi20:
* minor applid nrecvctlpkt nrecvdatapkt nsendctlpkt nsenddatapkt
*/
static int capi20_proc_show(struct seq_file *m, void *v)
static int __maybe_unused capi20_proc_show(struct seq_file *m, void *v)
{
struct capidev *cdev;
struct list_head *l;
@ -1344,7 +1345,7 @@ static int capi20_proc_show(struct seq_file *m, void *v)
* /proc/capi/capi20ncci:
* applid ncci
*/
static int capi20ncci_proc_show(struct seq_file *m, void *v)
static int __maybe_unused capi20ncci_proc_show(struct seq_file *m, void *v)
{
struct capidev *cdev;
struct capincci *np;

View File

@ -9,6 +9,7 @@
*
*/
#include <linux/compiler.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
@ -2451,7 +2452,7 @@ lower_callback(struct notifier_block *nb, unsigned long val, void *v)
* /proc/capi/capidrv:
* nrecvctlpkt nrecvdatapkt nsendctlpkt nsenddatapkt
*/
static int capidrv_proc_show(struct seq_file *m, void *v)
static int __maybe_unused capidrv_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%lu %lu %lu %lu\n",
global.ap.nrecvctlpkt,

View File

@ -739,6 +739,7 @@ static void read_int_callback(struct urb *urb)
case HD_OPEN_B2CHANNEL_ACK:
++channel;
/* fall through */
case HD_OPEN_B1CHANNEL_ACK:
bcs = cs->bcs + channel;
update_basstate(ucs, BS_B1OPEN << channel, 0);
@ -752,6 +753,7 @@ static void read_int_callback(struct urb *urb)
case HD_CLOSE_B2CHANNEL_ACK:
++channel;
/* fall through */
case HD_CLOSE_B1CHANNEL_ACK:
bcs = cs->bcs + channel;
update_basstate(ucs, 0, BS_B1OPEN << channel);
@ -765,6 +767,7 @@ static void read_int_callback(struct urb *urb)
case HD_B2_FLOW_CONTROL:
++channel;
/* fall through */
case HD_B1_FLOW_CONTROL:
bcs = cs->bcs + channel;
atomic_add((l - BAS_NORMFRAME) * BAS_CORRFRAMES,
@ -972,16 +975,14 @@ static int starturbs(struct bc_state *bcs)
rc = -EFAULT;
goto error;
}
usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel),
ubc->isoinbuf + k * BAS_INBUFSIZE,
BAS_INBUFSIZE, read_iso_callback, bcs,
BAS_FRAMETIME);
urb->dev = bcs->cs->hw.bas->udev;
urb->pipe = usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel);
urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = ubc->isoinbuf + k * BAS_INBUFSIZE;
urb->transfer_buffer_length = BAS_INBUFSIZE;
urb->number_of_packets = BAS_NUMFRAMES;
urb->interval = BAS_FRAMETIME;
urb->complete = read_iso_callback;
urb->context = bcs;
for (j = 0; j < BAS_NUMFRAMES; j++) {
urb->iso_frame_desc[j].offset = j * BAS_MAXFRAME;
urb->iso_frame_desc[j].length = BAS_MAXFRAME;
@ -1005,15 +1006,15 @@ static int starturbs(struct bc_state *bcs)
rc = -EFAULT;
goto error;
}
urb->dev = bcs->cs->hw.bas->udev;
urb->pipe = usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel);
usb_fill_int_urb(urb, bcs->cs->hw.bas->udev,
usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel),
ubc->isooutbuf->data,
sizeof(ubc->isooutbuf->data),
write_iso_callback, &ubc->isoouturbs[k],
BAS_FRAMETIME);
urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = ubc->isooutbuf->data;
urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
urb->number_of_packets = BAS_NUMFRAMES;
urb->interval = BAS_FRAMETIME;
urb->complete = write_iso_callback;
urb->context = &ubc->isoouturbs[k];
for (j = 0; j < BAS_NUMFRAMES; ++j) {
urb->iso_frame_desc[j].offset = BAS_OUTBUFSIZE;
urb->iso_frame_desc[j].length = BAS_NORMFRAME;

View File

@ -361,6 +361,7 @@ modehdlc(struct bchannel *bch, int protocol)
switch (protocol) {
case -1: /* used for init */
bch->state = -1;
/* fall through */
case ISDN_P_NONE:
if (bch->state == ISDN_P_NONE)
break;

View File

@ -1296,6 +1296,7 @@ mode_hfcpci(struct bchannel *bch, int bc, int protocol)
case (-1): /* used for init */
bch->state = -1;
bch->nr = bc;
/* fall through */
case (ISDN_P_NONE):
if (bch->state == ISDN_P_NONE)
return 0;
@ -2219,7 +2220,7 @@ hfc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct hfc_pci *card;
struct _hfc_map *m = (struct _hfc_map *)ent->driver_data;
card = kzalloc(sizeof(struct hfc_pci), GFP_ATOMIC);
card = kzalloc(sizeof(struct hfc_pci), GFP_KERNEL);
if (!card) {
printk(KERN_ERR "No kmem for HFC card\n");
return err;

View File

@ -819,6 +819,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
int fifon = fifo->fifonum;
int i;
int hdlc = 0;
unsigned long flags;
if (debug & DBG_HFC_CALL_TRACE)
printk(KERN_DEBUG "%s: %s: fifo(%i) len(%i) "
@ -835,7 +836,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
return;
}
spin_lock(&hw->lock);
spin_lock_irqsave(&hw->lock, flags);
if (fifo->dch) {
rx_skb = fifo->dch->rx_skb;
maxlen = fifo->dch->maxlen;
@ -844,7 +845,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
if (fifo->bch) {
if (test_bit(FLG_RX_OFF, &fifo->bch->Flags)) {
fifo->bch->dropcnt += len;
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
maxlen = bchannel_get_rxbuf(fifo->bch, len);
@ -854,7 +855,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
skb_trim(rx_skb, 0);
pr_warning("%s.B%d: No bufferspace for %d bytes\n",
hw->name, fifo->bch->nr, len);
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
maxlen = fifo->bch->maxlen;
@ -878,7 +879,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
} else {
printk(KERN_DEBUG "%s: %s: No mem for rx_skb\n",
hw->name, __func__);
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
}
@ -888,7 +889,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
"for fifo(%d) HFCUSB_D_RX\n",
hw->name, __func__, fifon);
skb_trim(rx_skb, 0);
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
}
@ -942,7 +943,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
/* deliver transparent data to layer2 */
recv_Bchannel(fifo->bch, MISDN_ID_ANY, false);
}
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
}
static void
@ -979,18 +980,19 @@ rx_iso_complete(struct urb *urb)
__u8 *buf;
static __u8 eof[8];
__u8 s0_state;
unsigned long flags;
fifon = fifo->fifonum;
status = urb->status;
spin_lock(&hw->lock);
spin_lock_irqsave(&hw->lock, flags);
if (fifo->stop_gracefull) {
fifo->stop_gracefull = 0;
fifo->active = 0;
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
/*
* ISO transfer only partially completed,
@ -1096,15 +1098,16 @@ rx_int_complete(struct urb *urb)
struct usb_fifo *fifo = (struct usb_fifo *) urb->context;
struct hfcsusb *hw = fifo->hw;
static __u8 eof[8];
unsigned long flags;
spin_lock(&hw->lock);
spin_lock_irqsave(&hw->lock, flags);
if (fifo->stop_gracefull) {
fifo->stop_gracefull = 0;
fifo->active = 0;
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
fifon = fifo->fifonum;
if ((!fifo->active) || (urb->status)) {
@ -1172,12 +1175,13 @@ tx_iso_complete(struct urb *urb)
int *tx_idx;
int frame_complete, fifon, status, fillempty = 0;
__u8 threshbit, *p;
unsigned long flags;
spin_lock(&hw->lock);
spin_lock_irqsave(&hw->lock, flags);
if (fifo->stop_gracefull) {
fifo->stop_gracefull = 0;
fifo->active = 0;
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
@ -1195,7 +1199,7 @@ tx_iso_complete(struct urb *urb)
} else {
printk(KERN_DEBUG "%s: %s: neither BCH nor DCH\n",
hw->name, __func__);
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
return;
}
@ -1375,7 +1379,7 @@ tx_iso_complete(struct urb *urb)
hw->name, __func__,
symbolic(urb_errlist, status), status, fifon);
}
spin_unlock(&hw->lock);
spin_unlock_irqrestore(&hw->lock, flags);
}
/*

View File

@ -887,6 +887,7 @@ release_card(struct inf_hw *card) {
release_card(card->sc[i]);
card->sc[i] = NULL;
}
/* fall through */
default:
pci_disable_device(card->pdev);
pci_set_drvdata(card->pdev, NULL);

View File

@ -972,6 +972,7 @@ isar_pump_statev_fax(struct isar_ch *ch, u8 devt) {
break;
case PCTRL_CMD_FTM:
p1 = 2;
/* fall through */
case PCTRL_CMD_FTH:
send_mbox(ch->is, dps | ISAR_HIS_PUMPCTRL,
PCTRL_CMD_SILON, 1, &p1);
@ -1177,6 +1178,7 @@ setup_pump(struct isar_ch *ch) {
send_mbox(ch->is, dps | ISAR_HIS_PUMPCFG,
PMOD_DTMF, 1, param);
}
/* fall through */
case ISDN_P_B_MODEM_ASYNC:
ctrl = PMOD_DATAMODEM;
if (test_bit(FLG_ORIGIN, &ch->bch.Flags)) {
@ -1268,6 +1270,7 @@ setup_iom2(struct isar_ch *ch) {
case ISDN_P_B_MODEM_ASYNC:
case ISDN_P_B_T30_FAX:
cmsb |= IOM_CTRL_RCV;
/* fall through */
case ISDN_P_B_L2DTMF:
if (test_bit(FLG_DTMFSEND, &ch->bch.Flags))
cmsb |= IOM_CTRL_RCV;
@ -1560,6 +1563,7 @@ isar_l2l1(struct mISDNchannel *ch, struct sk_buff *skb)
ich->is->name, hh->id);
ret = -EINVAL;
}
/* fall through */
default:
pr_info("%s: %s unknown prim(%x,%x)\n",
ich->is->name, __func__, hh->prim, hh->id);

View File

@ -1084,7 +1084,7 @@ nj_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
}
card = kzalloc(sizeof(struct tiger_hw), GFP_ATOMIC);
card = kzalloc(sizeof(struct tiger_hw), GFP_KERNEL);
if (!card) {
pr_info("No kmem for Netjet\n");
return err;

View File

@ -207,6 +207,7 @@ modehdlc(struct BCState *bcs, int mode, int bc)
bcs->mode = 1;
bcs->channel = bc;
bc = 0;
/* fall through */
case (L1_MODE_NULL):
if (bcs->mode == L1_MODE_NULL)
return;

View File

@ -1012,7 +1012,7 @@ dummy_pstack(struct PStack *st, int pr, void *arg) {
static int
init_PStack(struct PStack **stp) {
*stp = kmalloc(sizeof(struct PStack), GFP_ATOMIC);
*stp = kmalloc(sizeof(struct PStack), GFP_KERNEL);
if (!*stp)
return -ENOMEM;
(*stp)->next = NULL;
@ -1369,6 +1369,7 @@ leased_l1l2(struct PStack *st, int pr, void *arg)
case (PH_ACTIVATE | INDICATION):
case (PH_ACTIVATE | CONFIRM):
event = EV_LEASED;
/* fall through */
case (PH_DEACTIVATE | INDICATION):
case (PH_DEACTIVATE | CONFIRM):
if (test_bit(FLG_TWO_DCHAN, &chanp->cs->HW_Flags))

View File

@ -1029,7 +1029,7 @@ static int hisax_cs_new(int cardnr, char *id, struct IsdnCard *card,
*cs_out = NULL;
cs = kzalloc(sizeof(struct IsdnCardState), GFP_ATOMIC);
cs = kzalloc(sizeof(struct IsdnCardState), GFP_KERNEL);
if (!cs) {
printk(KERN_WARNING
"HiSax: No memory for IsdnCardState(card %d)\n",
@ -1059,12 +1059,12 @@ static int hisax_cs_new(int cardnr, char *id, struct IsdnCard *card,
"HiSax: Card Type %d out of range\n", card->typ);
goto outf_cs;
}
if (!(cs->dlog = kmalloc(MAX_DLOG_SPACE, GFP_ATOMIC))) {
if (!(cs->dlog = kmalloc(MAX_DLOG_SPACE, GFP_KERNEL))) {
printk(KERN_WARNING
"HiSax: No memory for dlog(card %d)\n", cardnr + 1);
goto outf_cs;
}
if (!(cs->status_buf = kmalloc(HISAX_STATUS_BUFSIZE, GFP_ATOMIC))) {
if (!(cs->status_buf = kmalloc(HISAX_STATUS_BUFSIZE, GFP_KERNEL))) {
printk(KERN_WARNING
"HiSax: No memory for status_buf(card %d)\n",
cardnr + 1);
@ -1123,7 +1123,7 @@ static int hisax_cs_setup(int cardnr, struct IsdnCard *card,
{
int ret;
if (!(cs->rcvbuf = kmalloc(MAX_DFRAME_LEN_L1, GFP_ATOMIC))) {
if (!(cs->rcvbuf = kmalloc(MAX_DFRAME_LEN_L1, GFP_KERNEL))) {
printk(KERN_WARNING "HiSax: No memory for isac rcvbuf\n");
ll_unload(cs);
goto outf_cs;
@ -1843,6 +1843,7 @@ static void hisax_b_l2l1(struct PStack *st, int pr, void *arg)
case PH_DEACTIVATE | REQUEST:
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
skb_queue_purge(&bcs->squeue);
/* fall through */
default:
B_L2L1(b_if, pr, arg);
break;

View File

@ -108,6 +108,7 @@ ReadISAC(struct IsdnCardState *cs, u_char offset)
switch (cs->subtyp) {
case R647:
off2 = ((off2 << 8 & 0xf000) | (off2 & 0xf));
/* fall through */
case R685:
return (readreg(cs->hw.gazel.isac, off2));
case R753:
@ -125,6 +126,7 @@ WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
switch (cs->subtyp) {
case R647:
off2 = ((off2 << 8 & 0xf000) | (off2 & 0xf));
/* fall through */
case R685:
writereg(cs->hw.gazel.isac, off2, value);
break;
@ -203,6 +205,7 @@ ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
switch (cs->subtyp) {
case R647:
off2 = ((off2 << 8 & 0xf000) | (off2 & 0xf));
/* fall through */
case R685:
return (readreg(cs->hw.gazel.hscx[hscx], off2));
case R753:
@ -220,6 +223,7 @@ WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
switch (cs->subtyp) {
case R647:
off2 = ((off2 << 8 & 0xf000) | (off2 & 0xf));
/* fall through */
case R685:
writereg(cs->hw.gazel.hscx[hscx], off2, value);
break;

View File

@ -432,16 +432,12 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe,
{
int k;
urb->dev = dev;
urb->pipe = pipe;
urb->complete = complete;
usb_fill_int_urb(urb, dev, pipe, buf, packet_size * num_packets,
complete, context, interval);
urb->number_of_packets = num_packets;
urb->transfer_buffer_length = packet_size * num_packets;
urb->context = context;
urb->transfer_buffer = buf;
urb->transfer_flags = URB_ISO_ASAP;
urb->actual_length = 0;
urb->interval = interval;
for (k = 0; k < num_packets; k++) {
urb->iso_frame_desc[k].offset = packet_size * k;
urb->iso_frame_desc[k].length = packet_size;

View File

@ -1089,6 +1089,7 @@ isar_pump_statev_fax(struct BCState *bcs, u_char devt) {
break;
case PCTRL_CMD_FTM:
p1 = 2;
/* fall through */
case PCTRL_CMD_FTH:
sendmsg(cs, dps | ISAR_HIS_PUMPCTRL,
PCTRL_CMD_SILON, 1, &p1);
@ -1097,6 +1098,7 @@ isar_pump_statev_fax(struct BCState *bcs, u_char devt) {
case PCTRL_CMD_FRM:
if (frm_extra_delay)
mdelay(frm_extra_delay);
/* fall through */
case PCTRL_CMD_FRH:
p1 = bcs->hw.isar.mod = bcs->hw.isar.newmod;
bcs->hw.isar.newmod = 0;

View File

@ -88,6 +88,7 @@ l3_1tr6_setup_req(struct l3_process *pc, u_char pr, void *arg)
break;
case 'C':
channel = 0x08;
/* fall through */
case 'P':
channel |= 0x80;
teln++;

View File

@ -1282,6 +1282,7 @@ l3dss1_setup_req(struct l3_process *pc, u_char pr,
switch (0x5f & *teln) {
case 'C':
channel = 0x08;
/* fall through */
case 'P':
channel |= 0x80;
teln++;

View File

@ -408,15 +408,10 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev,
{
int k;
urb->dev = dev;
urb->pipe = pipe;
urb->interval = 1;
urb->transfer_buffer = buf;
usb_fill_int_urb(urb, dev, pipe, buf, num_packets * packet_size,
complete, context, 1);
urb->number_of_packets = num_packets;
urb->transfer_buffer_length = num_packets * packet_size;
urb->actual_length = 0;
urb->complete = complete;
urb->context = context;
urb->transfer_flags = URB_ISO_ASAP;
for (k = 0; k < num_packets; k++) {
urb->iso_frame_desc[k].offset = packet_size * k;

Some files were not shown because too many files have changed in this diff Show More