PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.
Trusted Firmware-A (TF-A) for rk3399 implements a SiP call to get the on-die termination (ODT) and auto power down parameters from kernel, this patch adds the functionality to do this. Also, if DDR clock frequency is lower than the on-die termination (ODT) disable frequency this driver should disable the DDR ODT. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Gaël PORTAY <gael.portay@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This commit is contained in:
Enric Balletbo i Serra
MyungJoo Ham
parent
adfe3b7660
commit
9173c5ceb0
|
|
@ -18,14 +18,17 @@
|
|||
#include <linux/devfreq.h>
|
||||
#include <linux/devfreq-event.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm_opp.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/rwsem.h>
|
||||
#include <linux/suspend.h>
|
||||
|
||||
#include <soc/rockchip/rk3399_grf.h>
|
||||
#include <soc/rockchip/rockchip_sip.h>
|
||||
|
||||
struct dram_timing {
|
||||
|
|
@ -69,8 +72,11 @@ struct rk3399_dmcfreq {
|
|||
struct mutex lock;
|
||||
struct dram_timing timing;
|
||||
struct regulator *vdd_center;
|
||||
struct regmap *regmap_pmu;
|
||||
unsigned long rate, target_rate;
|
||||
unsigned long volt, target_volt;
|
||||
unsigned int odt_dis_freq;
|
||||
int odt_pd_arg0, odt_pd_arg1;
|
||||
};
|
||||
|
||||
static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
|
||||
|
|
@ -80,6 +86,8 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
|
|||
struct dev_pm_opp *opp;
|
||||
unsigned long old_clk_rate = dmcfreq->rate;
|
||||
unsigned long target_volt, target_rate;
|
||||
struct arm_smccc_res res;
|
||||
bool odt_enable = false;
|
||||
int err;
|
||||
|
||||
opp = devfreq_recommended_opp(dev, freq, flags);
|
||||
|
|
@ -95,6 +103,19 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
|
|||
|
||||
mutex_lock(&dmcfreq->lock);
|
||||
|
||||
if (target_rate >= dmcfreq->odt_dis_freq)
|
||||
odt_enable = true;
|
||||
|
||||
/*
|
||||
* This makes a SMC call to the TF-A to set the DDR PD (power-down)
|
||||
* timings and to enable or disable the ODT (on-die termination)
|
||||
* resistors.
|
||||
*/
|
||||
arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, dmcfreq->odt_pd_arg0,
|
||||
dmcfreq->odt_pd_arg1,
|
||||
ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD,
|
||||
odt_enable, 0, 0, 0, &res);
|
||||
|
||||
/*
|
||||
* If frequency scaling from low to high, adjust voltage first.
|
||||
* If frequency scaling from high to low, adjust frequency first.
|
||||
|
|
@ -294,11 +315,13 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
|
|||
{
|
||||
struct arm_smccc_res res;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct device_node *np = pdev->dev.of_node, *node;
|
||||
struct rk3399_dmcfreq *data;
|
||||
int ret, index, size;
|
||||
uint32_t *timing;
|
||||
struct dev_pm_opp *opp;
|
||||
u32 ddr_type;
|
||||
u32 val;
|
||||
|
||||
data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL);
|
||||
if (!data)
|
||||
|
|
@ -354,10 +377,56 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
|
|||
}
|
||||
}
|
||||
|
||||
node = of_parse_phandle(np, "rockchip,pmu", 0);
|
||||
if (node) {
|
||||
data->regmap_pmu = syscon_node_to_regmap(node);
|
||||
if (IS_ERR(data->regmap_pmu))
|
||||
return PTR_ERR(data->regmap_pmu);
|
||||
}
|
||||
|
||||
regmap_read(data->regmap_pmu, RK3399_PMUGRF_OS_REG2, &val);
|
||||
ddr_type = (val >> RK3399_PMUGRF_DDRTYPE_SHIFT) &
|
||||
RK3399_PMUGRF_DDRTYPE_MASK;
|
||||
|
||||
switch (ddr_type) {
|
||||
case RK3399_PMUGRF_DDRTYPE_DDR3:
|
||||
data->odt_dis_freq = data->timing.ddr3_odt_dis_freq;
|
||||
break;
|
||||
case RK3399_PMUGRF_DDRTYPE_LPDDR3:
|
||||
data->odt_dis_freq = data->timing.lpddr3_odt_dis_freq;
|
||||
break;
|
||||
case RK3399_PMUGRF_DDRTYPE_LPDDR4:
|
||||
data->odt_dis_freq = data->timing.lpddr4_odt_dis_freq;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
};
|
||||
|
||||
arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0,
|
||||
ROCKCHIP_SIP_CONFIG_DRAM_INIT,
|
||||
0, 0, 0, 0, &res);
|
||||
|
||||
/*
|
||||
* In TF-A there is a platform SIP call to set the PD (power-down)
|
||||
* timings and to enable or disable the ODT (on-die termination).
|
||||
* This call needs three arguments as follows:
|
||||
*
|
||||
* arg0:
|
||||
* bit[0-7] : sr_idle
|
||||
* bit[8-15] : sr_mc_gate_idle
|
||||
* bit[16-31] : standby idle
|
||||
* arg1:
|
||||
* bit[0-11] : pd_idle
|
||||
* bit[16-27] : srpd_lite_idle
|
||||
* arg2:
|
||||
* bit[0] : odt enable
|
||||
*/
|
||||
data->odt_pd_arg0 = (data->timing.sr_idle & 0xff) |
|
||||
((data->timing.sr_mc_gate_idle & 0xff) << 8) |
|
||||
((data->timing.standby_idle & 0xffff) << 16);
|
||||
data->odt_pd_arg1 = (data->timing.pd_idle & 0xfff) |
|
||||
((data->timing.srpd_lite_idle & 0xfff) << 16);
|
||||
|
||||
/*
|
||||
* We add a devfreq driver to our parent since it has a device tree node
|
||||
* with operating points.
|
||||
|
|
|
|||
|
|
@ -23,5 +23,6 @@
|
|||
#define ROCKCHIP_SIP_CONFIG_DRAM_GET_RATE 0x05
|
||||
#define ROCKCHIP_SIP_CONFIG_DRAM_CLR_IRQ 0x06
|
||||
#define ROCKCHIP_SIP_CONFIG_DRAM_SET_PARAM 0x07
|
||||
#define ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD 0x08
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue