mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 23:36:23 +09:00
backlight: lm3630a: Add firmware node support
Add fwnode support to the lm3630a driver and optionally allow configuring the label, default brightness level, and maximum brightness level. The two outputs can be controlled by bank A and B independently or bank A can control both outputs. If the platform data was not configured, then the driver defaults to enabling both banks. This patch changes the default value to disable both banks before parsing the firmware node so that just a single bank can be enabled if desired. There are no in-tree users of this driver. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Dan Murphy <dmurphy@ti.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Brian Masney
Lee Jones
parent
32fcb75c66
commit
8fbce8efe1
|
|
@ -35,6 +35,14 @@
|
|||
#define REG_MAX 0x50
|
||||
|
||||
#define INT_DEBOUNCE_MSEC 10
|
||||
|
||||
#define LM3630A_BANK_0 0
|
||||
#define LM3630A_BANK_1 1
|
||||
|
||||
#define LM3630A_NUM_SINKS 2
|
||||
#define LM3630A_SINK_0 0
|
||||
#define LM3630A_SINK_1 1
|
||||
|
||||
struct lm3630a_chip {
|
||||
struct device *dev;
|
||||
struct delayed_work work;
|
||||
|
|
@ -329,15 +337,17 @@ static const struct backlight_ops lm3630a_bank_b_ops = {
|
|||
|
||||
static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
|
||||
{
|
||||
struct backlight_properties props;
|
||||
struct lm3630a_platform_data *pdata = pchip->pdata;
|
||||
struct backlight_properties props;
|
||||
const char *label;
|
||||
|
||||
props.type = BACKLIGHT_RAW;
|
||||
if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) {
|
||||
props.brightness = pdata->leda_init_brt;
|
||||
props.max_brightness = pdata->leda_max_brt;
|
||||
label = pdata->leda_label ? pdata->leda_label : "lm3630a_leda";
|
||||
pchip->bleda =
|
||||
devm_backlight_device_register(pchip->dev, "lm3630a_leda",
|
||||
devm_backlight_device_register(pchip->dev, label,
|
||||
pchip->dev, pchip,
|
||||
&lm3630a_bank_a_ops, &props);
|
||||
if (IS_ERR(pchip->bleda))
|
||||
|
|
@ -348,8 +358,9 @@ static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
|
|||
(pdata->ledb_ctrl != LM3630A_LEDB_ON_A)) {
|
||||
props.brightness = pdata->ledb_init_brt;
|
||||
props.max_brightness = pdata->ledb_max_brt;
|
||||
label = pdata->ledb_label ? pdata->ledb_label : "lm3630a_ledb";
|
||||
pchip->bledb =
|
||||
devm_backlight_device_register(pchip->dev, "lm3630a_ledb",
|
||||
devm_backlight_device_register(pchip->dev, label,
|
||||
pchip->dev, pchip,
|
||||
&lm3630a_bank_b_ops, &props);
|
||||
if (IS_ERR(pchip->bledb))
|
||||
|
|
@ -364,6 +375,123 @@ static const struct regmap_config lm3630a_regmap = {
|
|||
.max_register = REG_MAX,
|
||||
};
|
||||
|
||||
static int lm3630a_parse_led_sources(struct fwnode_handle *node,
|
||||
int default_led_sources)
|
||||
{
|
||||
u32 sources[LM3630A_NUM_SINKS];
|
||||
int ret, num_sources, i;
|
||||
|
||||
num_sources = fwnode_property_read_u32_array(node, "led-sources", NULL,
|
||||
0);
|
||||
if (num_sources < 0)
|
||||
return default_led_sources;
|
||||
else if (num_sources > ARRAY_SIZE(sources))
|
||||
return -EINVAL;
|
||||
|
||||
ret = fwnode_property_read_u32_array(node, "led-sources", sources,
|
||||
num_sources);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < num_sources; i++) {
|
||||
if (sources[i] < LM3630A_SINK_0 || sources[i] > LM3630A_SINK_1)
|
||||
return -EINVAL;
|
||||
|
||||
ret |= BIT(sources[i]);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm3630a_parse_bank(struct lm3630a_platform_data *pdata,
|
||||
struct fwnode_handle *node, int *seen_led_sources)
|
||||
{
|
||||
int led_sources, ret;
|
||||
const char *label;
|
||||
u32 bank, val;
|
||||
bool linear;
|
||||
|
||||
ret = fwnode_property_read_u32(node, "reg", &bank);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (bank < LM3630A_BANK_0 || bank > LM3630A_BANK_1)
|
||||
return -EINVAL;
|
||||
|
||||
led_sources = lm3630a_parse_led_sources(node, BIT(bank));
|
||||
if (led_sources < 0)
|
||||
return led_sources;
|
||||
|
||||
if (*seen_led_sources & led_sources)
|
||||
return -EINVAL;
|
||||
|
||||
*seen_led_sources |= led_sources;
|
||||
|
||||
linear = fwnode_property_read_bool(node,
|
||||
"ti,linear-mapping-mode");
|
||||
if (bank) {
|
||||
if (led_sources & BIT(LM3630A_SINK_0) ||
|
||||
!(led_sources & BIT(LM3630A_SINK_1)))
|
||||
return -EINVAL;
|
||||
|
||||
pdata->ledb_ctrl = linear ?
|
||||
LM3630A_LEDB_ENABLE_LINEAR :
|
||||
LM3630A_LEDB_ENABLE;
|
||||
} else {
|
||||
if (!(led_sources & BIT(LM3630A_SINK_0)))
|
||||
return -EINVAL;
|
||||
|
||||
pdata->leda_ctrl = linear ?
|
||||
LM3630A_LEDA_ENABLE_LINEAR :
|
||||
LM3630A_LEDA_ENABLE;
|
||||
|
||||
if (led_sources & BIT(LM3630A_SINK_1))
|
||||
pdata->ledb_ctrl = LM3630A_LEDB_ON_A;
|
||||
}
|
||||
|
||||
ret = fwnode_property_read_string(node, "label", &label);
|
||||
if (!ret) {
|
||||
if (bank)
|
||||
pdata->ledb_label = label;
|
||||
else
|
||||
pdata->leda_label = label;
|
||||
}
|
||||
|
||||
ret = fwnode_property_read_u32(node, "default-brightness",
|
||||
&val);
|
||||
if (!ret) {
|
||||
if (bank)
|
||||
pdata->ledb_init_brt = val;
|
||||
else
|
||||
pdata->leda_init_brt = val;
|
||||
}
|
||||
|
||||
ret = fwnode_property_read_u32(node, "max-brightness", &val);
|
||||
if (!ret) {
|
||||
if (bank)
|
||||
pdata->ledb_max_brt = val;
|
||||
else
|
||||
pdata->leda_max_brt = val;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lm3630a_parse_node(struct lm3630a_chip *pchip,
|
||||
struct lm3630a_platform_data *pdata)
|
||||
{
|
||||
int ret = -ENODEV, seen_led_sources = 0;
|
||||
struct fwnode_handle *node;
|
||||
|
||||
device_for_each_child_node(pchip->dev, node) {
|
||||
ret = lm3630a_parse_bank(pdata, node, &seen_led_sources);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm3630a_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
|
|
@ -396,13 +524,18 @@ static int lm3630a_probe(struct i2c_client *client,
|
|||
GFP_KERNEL);
|
||||
if (pdata == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
/* default values */
|
||||
pdata->leda_ctrl = LM3630A_LEDA_ENABLE;
|
||||
pdata->ledb_ctrl = LM3630A_LEDB_ENABLE;
|
||||
pdata->leda_max_brt = LM3630A_MAX_BRIGHTNESS;
|
||||
pdata->ledb_max_brt = LM3630A_MAX_BRIGHTNESS;
|
||||
pdata->leda_init_brt = LM3630A_MAX_BRIGHTNESS;
|
||||
pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS;
|
||||
|
||||
rval = lm3630a_parse_node(pchip, pdata);
|
||||
if (rval) {
|
||||
dev_err(&client->dev, "fail : parse node\n");
|
||||
return rval;
|
||||
}
|
||||
}
|
||||
pchip->pdata = pdata;
|
||||
|
||||
|
|
@ -470,11 +603,17 @@ static const struct i2c_device_id lm3630a_id[] = {
|
|||
{}
|
||||
};
|
||||
|
||||
static const struct of_device_id lm3630a_match_table[] = {
|
||||
{ .compatible = "ti,lm3630a", },
|
||||
{ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, lm3630a_id);
|
||||
|
||||
static struct i2c_driver lm3630a_i2c_driver = {
|
||||
.driver = {
|
||||
.name = LM3630A_NAME,
|
||||
.of_match_table = lm3630a_match_table,
|
||||
},
|
||||
.probe = lm3630a_probe,
|
||||
.remove = lm3630a_remove,
|
||||
|
|
|
|||
|
|
@ -38,9 +38,11 @@ enum lm3630a_ledb_ctrl {
|
|||
|
||||
#define LM3630A_MAX_BRIGHTNESS 255
|
||||
/*
|
||||
*@leda_label : optional led a label.
|
||||
*@leda_init_brt : led a init brightness. 4~255
|
||||
*@leda_max_brt : led a max brightness. 4~255
|
||||
*@leda_ctrl : led a disable, enable linear, enable exponential
|
||||
*@ledb_label : optional led b label.
|
||||
*@ledb_init_brt : led b init brightness. 4~255
|
||||
*@ledb_max_brt : led b max brightness. 4~255
|
||||
*@ledb_ctrl : led b disable, enable linear, enable exponential
|
||||
|
|
@ -50,10 +52,12 @@ enum lm3630a_ledb_ctrl {
|
|||
struct lm3630a_platform_data {
|
||||
|
||||
/* led a config. */
|
||||
const char *leda_label;
|
||||
int leda_init_brt;
|
||||
int leda_max_brt;
|
||||
enum lm3630a_leda_ctrl leda_ctrl;
|
||||
/* led b config. */
|
||||
const char *ledb_label;
|
||||
int ledb_init_brt;
|
||||
int ledb_max_brt;
|
||||
enum lm3630a_ledb_ctrl ledb_ctrl;
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user