mirror of
https://github.com/brain-hackers/linux-brain.git
synced 2024-06-09 23:36:23 +09:00
ARM: mxs: convert m28evk board to device tree
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Marek Vasut
Shawn Guo
parent
3dba259673
commit
8fa62e1128
|
|
@ -232,6 +232,17 @@
|
|||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
auart0_2pins_a: auart0-2pins@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
|
||||
0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
auart3_pins_a: auart3@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
|
|
|
|||
210
arch/arm/boot/dts/m28evk.dts
Normal file
210
arch/arm/boot/dts/m28evk.dts
Normal file
|
|
@ -0,0 +1,210 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DENX M28EVK";
|
||||
compatible = "denx,m28evk", "fsl,imx28";
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x08000000>;
|
||||
};
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
gpmi-nand@8000c000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
label = "bootloader";
|
||||
reg = <0x00000000 0x00300000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "environment";
|
||||
reg = <0x00300000 0x00080000>;
|
||||
};
|
||||
|
||||
partition@2 {
|
||||
label = "redundant-environment";
|
||||
reg = <0x00380000 0x00080000>;
|
||||
};
|
||||
|
||||
partition@3 {
|
||||
label = "kernel";
|
||||
reg = <0x00400000 0x00400000>;
|
||||
};
|
||||
|
||||
partition@4 {
|
||||
label = "filesystem";
|
||||
reg = <0x00800000 0x0f800000>;
|
||||
};
|
||||
};
|
||||
|
||||
ssp0: ssp@80010000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_8bit_pins_a
|
||||
&mmc0_cd_cfg
|
||||
&mmc0_sck_cfg>;
|
||||
bus-width = <8>;
|
||||
wp-gpios = <&gpio3 10 1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hog_pins_a>;
|
||||
|
||||
hog_pins_a: hog-gpios@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
|
||||
0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
lcdif_pins_m28: lcdif-m28@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
|
||||
0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
lcdif@80030000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_24bit_pins_a
|
||||
&lcdif_pins_m28>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
can0: can@80032000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&can0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
can1: can@80034000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&can1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
saif0: saif@80042000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
saif1: saif@80046000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif1_pins_a>;
|
||||
fsl,saif-master = <&saif0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@80058000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
sgtl5000: codec@0a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
VDDA-supply = <®_3p3v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
|
||||
};
|
||||
|
||||
eeprom: eeprom@51 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x51>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
|
||||
rtc: rtc@68 {
|
||||
compatible = "stm,mt41t62";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
duart: serial@80074000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&duart_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
auart0: serial@8006a000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&auart0_2pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
auart3: serial@80070000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&auart3_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
mac0: ethernet@800f0000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
phy-reset-gpios = <&gpio3 11 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mac1: ethernet@800f4000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
reg_3p3v: 3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "denx,m28evk-sgtl5000",
|
||||
"fsl,mxs-audio-sgtl5000";
|
||||
model = "m28evk-sgtl5000";
|
||||
saif-controllers = <&saif0 &saif1>;
|
||||
audio-codec = <&sgtl5000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -59,6 +59,23 @@ static struct fb_videomode mx28evk_video_modes[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct fb_videomode m28evk_video_modes[] = {
|
||||
{
|
||||
.name = "Ampire AM-800480R2TMQW-T01H",
|
||||
.refresh = 60,
|
||||
.xres = 800,
|
||||
.yres = 480,
|
||||
.pixclock = 30066, /* picosecond (33.26 MHz) */
|
||||
.left_margin = 0,
|
||||
.right_margin = 256,
|
||||
.upper_margin = 0,
|
||||
.lower_margin = 45,
|
||||
.hsync_len = 1,
|
||||
.vsync_len = 1,
|
||||
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mxsfb_platform_data mxsfb_pdata __initdata;
|
||||
|
||||
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
|
||||
|
|
@ -186,15 +203,17 @@ static void __init imx23_evk_init(void)
|
|||
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
|
||||
}
|
||||
|
||||
static void __init imx28_evk_init(void)
|
||||
static inline void enable_clk_enet_out(void)
|
||||
{
|
||||
struct clk *clk;
|
||||
struct clk *clk = clk_get_sys("enet_out", NULL);
|
||||
|
||||
/* Enable fec phy clock */
|
||||
clk = clk_get_sys("enet_out", NULL);
|
||||
if (!IS_ERR(clk))
|
||||
clk_prepare_enable(clk);
|
||||
}
|
||||
|
||||
static void __init imx28_evk_init(void)
|
||||
{
|
||||
enable_clk_enet_out();
|
||||
update_fec_mac_prop(OUI_FSL);
|
||||
|
||||
mxsfb_pdata.mode_list = mx28evk_video_modes;
|
||||
|
|
@ -203,12 +222,25 @@ static void __init imx28_evk_init(void)
|
|||
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
|
||||
}
|
||||
|
||||
static void __init m28evk_init(void)
|
||||
{
|
||||
enable_clk_enet_out();
|
||||
update_fec_mac_prop(OUI_DENX);
|
||||
|
||||
mxsfb_pdata.mode_list = m28evk_video_modes;
|
||||
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
|
||||
mxsfb_pdata.default_bpp = 16;
|
||||
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
|
||||
}
|
||||
|
||||
static void __init mxs_machine_init(void)
|
||||
{
|
||||
if (of_machine_is_compatible("fsl,imx28-evk"))
|
||||
imx28_evk_init();
|
||||
else if (of_machine_is_compatible("fsl,imx23-evk"))
|
||||
imx23_evk_init();
|
||||
else if (of_machine_is_compatible("denx,m28evk"))
|
||||
m28evk_init();
|
||||
|
||||
of_platform_populate(NULL, of_default_bus_match_table,
|
||||
mxs_auxdata_lookup, NULL);
|
||||
|
|
@ -223,6 +255,7 @@ static const char *imx23_dt_compat[] __initdata = {
|
|||
|
||||
static const char *imx28_dt_compat[] __initdata = {
|
||||
"crystalfontz,cfa10036",
|
||||
"denx,m28evk",
|
||||
"fsl,imx28-evk",
|
||||
"fsl,imx28",
|
||||
NULL,
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user