[PATCH] devfs: Last little devfs cleanups throughout the kernel tree.

Just removes a few unused #defines and fixes some comments due to
devfs now being gone.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Greg Kroah-Hartman 2005-06-20 21:15:16 -07:00
parent 331b831983
commit 890fbae281
10 changed files with 18 additions and 52 deletions

View File

@ -181,8 +181,8 @@ Intel IA32 microcode
--------------------
A driver has been added to allow updating of Intel IA32 microcode,
accessible as both a devfs regular file and as a normal (misc)
character device. If you are not using devfs you may need to:
accessible as a normal (misc) character device. If you are not using
udev you may need to:
mkdir /dev/cpu
mknod /dev/cpu/microcode c 10 184
@ -201,7 +201,9 @@ with programs using shared memory.
udev
----
udev is a userspace application for populating /dev dynamically with
only entries for devices actually present. udev replaces devfs.
only entries for devices actually present. udev replaces the basic
functionality of devfs, while allowing persistant device naming for
devices.
FUSE
----
@ -231,18 +233,13 @@ The PPP driver has been restructured to support multilink and to
enable it to operate over diverse media layers. If you use PPP,
upgrade pppd to at least 2.4.0.
If you are not using devfs, you must have the device file /dev/ppp
If you are not using udev, you must have the device file /dev/ppp
which can be made by:
mknod /dev/ppp c 108 0
as root.
If you use devfsd and build ppp support as modules, you will need
the following in your /etc/devfsd.conf file:
LOOKUP PPP MODLOAD
Isdn4k-utils
------------

View File

@ -348,11 +348,6 @@ X!Earch/i386/kernel/mca.c
</sect1>
</chapter>
<chapter id="devfs">
<title>The Device File System</title>
!Efs/devfs/base.c
</chapter>
<chapter id="sysfs">
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c

View File

@ -78,9 +78,9 @@ also known as "System Drives", and Drive Groups are also called "Packs". Both
terms are in use in the Mylex documentation; I have chosen to standardize on
the more generic "Logical Drive" and "Drive Group".
DAC960 RAID disk devices are named in the style of the Device File System
(DEVFS). The device corresponding to Logical Drive D on Controller C is
referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
DAC960 RAID disk devices are named in the style of the obsolete Device File
System (DEVFS). The device corresponding to Logical Drive D on Controller C
is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
disks the device names will not change in the event of a disk drive failure.

View File

@ -67,8 +67,7 @@ initrd adds the following new options:
as the last process has closed it, all data is freed and /dev/initrd
can't be opened anymore.
root=/dev/ram0 (without devfs)
root=/dev/rd/0 (with devfs)
root=/dev/ram0
initrd is mounted as root, and the normal boot procedure is followed,
with the RAM disk still mounted as root.
@ -90,8 +89,7 @@ you're building an install floppy), the root file system creation
procedure should create the /initrd directory.
If initrd will not be mounted in some cases, its content is still
accessible if the following device has been created (note that this
does not work if using devfs):
accessible if the following device has been created:
# mknod /dev/initrd b 1 250
# chmod 400 /dev/initrd
@ -119,8 +117,7 @@ We'll describe the loopback device method:
(if space is critical, you may want to use the Minix FS instead of Ext2)
3) mount the file system, e.g.
# mount -t ext2 -o loop initrd /mnt
4) create the console device (not necessary if using devfs, but it can't
hurt to do it anyway):
4) create the console device:
# mkdir /mnt/dev
# mknod /mnt/dev/console c 5 1
5) copy all the files that are needed to properly use the initrd
@ -152,12 +149,7 @@ have to be given:
root=/dev/ram0 init=/linuxrc rw
if not using devfs, or
root=/dev/rd/0 init=/linuxrc rw
if using devfs. (rw is only necessary if writing to the initrd file
system.)
(rw is only necessary if writing to the initrd file system.)
With LOADLIN, you simply execute
@ -217,9 +209,9 @@ following command:
# exec chroot . what-follows <dev/console >dev/console 2>&1
Where what-follows is a program under the new root, e.g. /sbin/init
If the new root file system will be used with devfs and has no valid
/dev directory, devfs must be mounted before invoking chroot in order to
provide /dev/console.
If the new root file system will be used with udev and has no valid
/dev directory, udev must be initialized before invoking chroot in order
to provide /dev/console.
Note: implementation details of pivot_root may change with time. In order
to ensure compatibility, the following points should be observed:
@ -236,7 +228,7 @@ Now, the initrd can be unmounted and the memory allocated by the RAM
disk can be freed:
# umount /initrd
# blockdev --flushbufs /dev/ram0 # /dev/rd/0 if using devfs
# blockdev --flushbufs /dev/ram0
It is also possible to use initrd with an NFS-mounted root, see the
pivot_root(8) man page for details.

View File

@ -119,7 +119,6 @@ Code Seq# Include File Comments
'c' 00-7F linux/comstats.h conflict!
'c' 00-7F linux/coda.h conflict!
'd' 00-FF linux/char/drm/drm/h conflict!
'd' 00-1F linux/devfs_fs.h conflict!
'd' 00-DF linux/video_decoder.h conflict!
'd' F0-FF linux/digi1.h
'e' all linux/digi1.h conflict!

View File

@ -35,7 +35,6 @@ parameter is applicable:
APM Advanced Power Management support is enabled.
AX25 Appropriate AX.25 support is enabled.
CD Appropriate CD support is enabled.
DEVFS devfs support is enabled.
DRM Direct Rendering Management support is enabled.
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
@ -440,9 +439,6 @@ running once the system is up.
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
devfs= [DEVFS]
See Documentation/filesystems/devfs/boot-options.
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.

View File

@ -59,7 +59,6 @@ MODULE_LICENSE("GPL");
* numbers 0-255 we get a maximum of 32 disks.
*/
#define VIOD_GENHD_NAME "iseries/vd"
#define VIOD_GENHD_DEVFS_NAME "iseries/disc"
#define VIOD_VERS "1.64"

View File

@ -49,7 +49,6 @@
#include <asm/iseries/vio.h>
#define VIOCD_DEVICE "iseries/vcd"
#define VIOCD_DEVICE_DEVFS "iseries/vcd"
#define VIOCD_VERS "1.06"

View File

@ -167,7 +167,7 @@ static void local_exit(void)
bioset_free(dm_set);
if (unregister_blkdev(_major, _name) < 0)
DMERR("devfs_unregister_blkdev failed");
DMERR("unregister_blkdev failed");
_major = 0;

View File

@ -126,10 +126,6 @@ struct ttusb {
int revision;
#if 0
devfs_handle_t stc_devfs_handle;
#endif
struct dvb_frontend* fe;
};
@ -1746,13 +1742,6 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
return -ENODEV;
}
#if 0
ttusb->stc_devfs_handle =
devfs_register(ttusb->adapter->devfs_handle, TTUSB_BUDGET_NAME,
DEVFS_FL_DEFAULT, 0, 192,
S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP
| S_IROTH | S_IWOTH, &stc_fops, ttusb);
#endif
usb_set_intfdata(intf, (void *) ttusb);
frontend_init(ttusb);