docs-rst: convert kgdb DocBook to ReST

Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Mauro Carvalho Chehab 2017-05-11 16:23:50 -03:00
parent dc89fca93e
commit 7fb2e8a490
4 changed files with 932 additions and 919 deletions

View File

@ -8,7 +8,7 @@
DOCBOOKS := z8530book.xml \
networking.xml \
filesystems.xml lsm.xml kgdb.xml \
filesystems.xml lsm.xml \
libata.xml mtdnand.xml librs.xml rapidio.xml \
s390-drivers.xml scsi.xml \
sh.xml w1.xml

View File

@ -1,918 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="kgdbOnLinux">
<bookinfo>
<title>Using kgdb, kdb and the kernel debugger internals</title>
<authorgroup>
<author>
<firstname>Jason</firstname>
<surname>Wessel</surname>
<affiliation>
<address>
<email>jason.wessel@windriver.com</email>
</address>
</affiliation>
</author>
</authorgroup>
<copyright>
<year>2008,2010</year>
<holder>Wind River Systems, Inc.</holder>
</copyright>
<copyright>
<year>2004-2005</year>
<holder>MontaVista Software, Inc.</holder>
</copyright>
<copyright>
<year>2004</year>
<holder>Amit S. Kale</holder>
</copyright>
<legalnotice>
<para>
This file is licensed under the terms of the GNU General Public License
version 2. This program is licensed "as is" without any warranty of any
kind, whether express or implied.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="Introduction">
<title>Introduction</title>
<para>
The kernel has two different debugger front ends (kdb and kgdb)
which interface to the debug core. It is possible to use either
of the debugger front ends and dynamically transition between them
if you configure the kernel properly at compile and runtime.
</para>
<para>
Kdb is simplistic shell-style interface which you can use on a
system console with a keyboard or serial console. You can use it
to inspect memory, registers, process lists, dmesg, and even set
breakpoints to stop in a certain location. Kdb is not a source
level debugger, although you can set breakpoints and execute some
basic kernel run control. Kdb is mainly aimed at doing some
analysis to aid in development or diagnosing kernel problems. You
can access some symbols by name in kernel built-ins or in kernel
modules if the code was built
with <symbol>CONFIG_KALLSYMS</symbol>.
</para>
<para>
Kgdb is intended to be used as a source level debugger for the
Linux kernel. It is used along with gdb to debug a Linux kernel.
The expectation is that gdb can be used to "break in" to the
kernel to inspect memory, variables and look through call stack
information similar to the way an application developer would use
gdb to debug an application. It is possible to place breakpoints
in kernel code and perform some limited execution stepping.
</para>
<para>
Two machines are required for using kgdb. One of these machines is
a development machine and the other is the target machine. The
kernel to be debugged runs on the target machine. The development
machine runs an instance of gdb against the vmlinux file which
contains the symbols (not a boot image such as bzImage, zImage,
uImage...). In gdb the developer specifies the connection
parameters and connects to kgdb. The type of connection a
developer makes with gdb depends on the availability of kgdb I/O
modules compiled as built-ins or loadable kernel modules in the test
machine's kernel.
</para>
</chapter>
<chapter id="CompilingAKernel">
<title>Compiling a kernel</title>
<para>
<itemizedlist>
<listitem><para>In order to enable compilation of kdb, you must first enable kgdb.</para></listitem>
<listitem><para>The kgdb test compile options are described in the kgdb test suite chapter.</para></listitem>
</itemizedlist>
</para>
<sect1 id="CompileKGDB">
<title>Kernel config options for kgdb</title>
<para>
To enable <symbol>CONFIG_KGDB</symbol> you should look under
"Kernel hacking" / "Kernel debugging" and select "KGDB: kernel debugger".
</para>
<para>
While it is not a hard requirement that you have symbols in your
vmlinux file, gdb tends not to be very useful without the symbolic
data, so you will want to turn
on <symbol>CONFIG_DEBUG_INFO</symbol> which is called "Compile the
kernel with debug info" in the config menu.
</para>
<para>
It is advised, but not required, that you turn on the
<symbol>CONFIG_FRAME_POINTER</symbol> kernel option which is called "Compile the
kernel with frame pointers" in the config menu. This option
inserts code to into the compiled executable which saves the frame
information in registers or on the stack at different points which
allows a debugger such as gdb to more accurately construct
stack back traces while debugging the kernel.
</para>
<para>
If the architecture that you are using supports the kernel option
CONFIG_STRICT_KERNEL_RWX, you should consider turning it off. This
option will prevent the use of software breakpoints because it
marks certain regions of the kernel's memory space as read-only.
If kgdb supports it for the architecture you are using, you can
use hardware breakpoints if you desire to run with the
CONFIG_STRICT_KERNEL_RWX option turned on, else you need to turn off
this option.
</para>
<para>
Next you should choose one of more I/O drivers to interconnect
debugging host and debugged target. Early boot debugging requires
a KGDB I/O driver that supports early debugging and the driver
must be built into the kernel directly. Kgdb I/O driver
configuration takes place via kernel or module parameters which
you can learn more about in the in the section that describes the
parameter "kgdboc".
</para>
<para>Here is an example set of .config symbols to enable or
disable for kgdb:
<itemizedlist>
<listitem><para># CONFIG_STRICT_KERNEL_RWX is not set</para></listitem>
<listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
<listitem><para>CONFIG_KGDB=y</para></listitem>
<listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>
</itemizedlist>
</para>
</sect1>
<sect1 id="CompileKDB">
<title>Kernel config options for kdb</title>
<para>Kdb is quite a bit more complex than the simple gdbstub
sitting on top of the kernel's debug core. Kdb must implement a
shell, and also adds some helper functions in other parts of the
kernel, responsible for printing out interesting data such as what
you would see if you ran "lsmod", or "ps". In order to build kdb
into the kernel you follow the same steps as you would for kgdb.
</para>
<para>The main config option for kdb
is <symbol>CONFIG_KGDB_KDB</symbol> which is called "KGDB_KDB:
include kdb frontend for kgdb" in the config menu. In theory you
would have already also selected an I/O driver such as the
CONFIG_KGDB_SERIAL_CONSOLE interface if you plan on using kdb on a
serial port, when you were configuring kgdb.
</para>
<para>If you want to use a PS/2-style keyboard with kdb, you would
select CONFIG_KDB_KEYBOARD which is called "KGDB_KDB: keyboard as
input device" in the config menu. The CONFIG_KDB_KEYBOARD option
is not used for anything in the gdb interface to kgdb. The
CONFIG_KDB_KEYBOARD option only works with kdb.
</para>
<para>Here is an example set of .config symbols to enable/disable kdb:
<itemizedlist>
<listitem><para># CONFIG_STRICT_KERNEL_RWX is not set</para></listitem>
<listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
<listitem><para>CONFIG_KGDB=y</para></listitem>
<listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>
<listitem><para>CONFIG_KGDB_KDB=y</para></listitem>
<listitem><para>CONFIG_KDB_KEYBOARD=y</para></listitem>
</itemizedlist>
</para>
</sect1>
</chapter>
<chapter id="kgdbKernelArgs">
<title>Kernel Debugger Boot Arguments</title>
<para>This section describes the various runtime kernel
parameters that affect the configuration of the kernel debugger.
The following chapter covers using kdb and kgdb as well as
providing some examples of the configuration parameters.</para>
<sect1 id="kgdboc">
<title>Kernel parameter: kgdboc</title>
<para>The kgdboc driver was originally an abbreviation meant to
stand for "kgdb over console". Today it is the primary mechanism
to configure how to communicate from gdb to kgdb as well as the
devices you want to use to interact with the kdb shell.
</para>
<para>For kgdb/gdb, kgdboc is designed to work with a single serial
port. It is intended to cover the circumstance where you want to
use a serial console as your primary console as well as using it to
perform kernel debugging. It is also possible to use kgdb on a
serial port which is not designated as a system console. Kgdboc
may be configured as a kernel built-in or a kernel loadable module.
You can only make use of <constant>kgdbwait</constant> and early
debugging if you build kgdboc into the kernel as a built-in.
</para>
<para>Optionally you can elect to activate kms (Kernel Mode
Setting) integration. When you use kms with kgdboc and you have a
video driver that has atomic mode setting hooks, it is possible to
enter the debugger on the graphics console. When the kernel
execution is resumed, the previous graphics mode will be restored.
This integration can serve as a useful tool to aid in diagnosing
crashes or doing analysis of memory with kdb while allowing the
full graphics console applications to run.
</para>
<sect2 id="kgdbocArgs">
<title>kgdboc arguments</title>
<para>Usage: <constant>kgdboc=[kms][[,]kbd][[,]serial_device][,baud]</constant></para>
<para>The order listed above must be observed if you use any of the
optional configurations together.
</para>
<para>Abbreviations:
<itemizedlist>
<listitem><para>kms = Kernel Mode Setting</para></listitem>
<listitem><para>kbd = Keyboard</para></listitem>
</itemizedlist>
</para>
<para>You can configure kgdboc to use the keyboard, and/or a serial
device depending on if you are using kdb and/or kgdb, in one of the
following scenarios. The order listed above must be observed if
you use any of the optional configurations together. Using kms +
only gdb is generally not a useful combination.</para>
<sect3 id="kgdbocArgs1">
<title>Using loadable module or built-in</title>
<para>
<orderedlist>
<listitem><para>As a kernel built-in:</para>
<para>Use the kernel boot argument: <constant>kgdboc=&lt;tty-device&gt;,[baud]</constant></para></listitem>
<listitem>
<para>As a kernel loadable module:</para>
<para>Use the command: <constant>modprobe kgdboc kgdboc=&lt;tty-device&gt;,[baud]</constant></para>
<para>Here are two examples of how you might format the kgdboc
string. The first is for an x86 target using the first serial port.
The second example is for the ARM Versatile AB using the second
serial port.
<orderedlist>
<listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem>
<listitem><para><constant>kgdboc=ttyAMA1,115200</constant></para></listitem>
</orderedlist>
</para>
</listitem>
</orderedlist></para>
</sect3>
<sect3 id="kgdbocArgs2">
<title>Configure kgdboc at runtime with sysfs</title>
<para>At run time you can enable or disable kgdboc by echoing a
parameters into the sysfs. Here are two examples:</para>
<orderedlist>
<listitem><para>Enable kgdboc on ttyS0</para>
<para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
<listitem><para>Disable kgdboc</para>
<para><constant>echo "" &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
</orderedlist>
<para>NOTE: You do not need to specify the baud if you are
configuring the console on tty which is already configured or
open.</para>
</sect3>
<sect3 id="kgdbocArgs3">
<title>More examples</title>
<para>You can configure kgdboc to use the keyboard, and/or a serial device
depending on if you are using kdb and/or kgdb, in one of the
following scenarios.
<orderedlist>
<listitem><para>kdb and kgdb over only a serial port</para>
<para><constant>kgdboc=&lt;serial_device&gt;[,baud]</constant></para>
<para>Example: <constant>kgdboc=ttyS0,115200</constant></para>
</listitem>
<listitem><para>kdb and kgdb with keyboard and a serial port</para>
<para><constant>kgdboc=kbd,&lt;serial_device&gt;[,baud]</constant></para>
<para>Example: <constant>kgdboc=kbd,ttyS0,115200</constant></para>
</listitem>
<listitem><para>kdb with a keyboard</para>
<para><constant>kgdboc=kbd</constant></para>
</listitem>
<listitem><para>kdb with kernel mode setting</para>
<para><constant>kgdboc=kms,kbd</constant></para>
</listitem>
<listitem><para>kdb with kernel mode setting and kgdb over a serial port</para>
<para><constant>kgdboc=kms,kbd,ttyS0,115200</constant></para>
</listitem>
</orderedlist>
</para>
<para>NOTE: Kgdboc does not support interrupting the target via the
gdb remote protocol. You must manually send a sysrq-g unless you
have a proxy that splits console output to a terminal program.
A console proxy has a separate TCP port for the debugger and a separate
TCP port for the "human" console. The proxy can take care of sending
the sysrq-g for you.
</para>
<para>When using kgdboc with no debugger proxy, you can end up
connecting the debugger at one of two entry points. If an
exception occurs after you have loaded kgdboc, a message should
print on the console stating it is waiting for the debugger. In
this case you disconnect your terminal program and then connect the
debugger in its place. If you want to interrupt the target system
and forcibly enter a debug session you have to issue a Sysrq
sequence and then type the letter <constant>g</constant>. Then
you disconnect the terminal session and connect gdb. Your options
if you don't like this are to hack gdb to send the sysrq-g for you
as well as on the initial connect, or to use a debugger proxy that
allows an unmodified gdb to do the debugging.
</para>
</sect3>
</sect2>
</sect1>
<sect1 id="kgdbwait">
<title>Kernel parameter: kgdbwait</title>
<para>
The Kernel command line option <constant>kgdbwait</constant> makes
kgdb wait for a debugger connection during booting of a kernel. You
can only use this option if you compiled a kgdb I/O driver into the
kernel and you specified the I/O driver configuration as a kernel
command line option. The kgdbwait parameter should always follow the
configuration parameter for the kgdb I/O driver in the kernel
command line else the I/O driver will not be configured prior to
asking the kernel to use it to wait.
</para>
<para>
The kernel will stop and wait as early as the I/O driver and
architecture allows when you use this option. If you build the
kgdb I/O driver as a loadable kernel module kgdbwait will not do
anything.
</para>
</sect1>
<sect1 id="kgdbcon">
<title>Kernel parameter: kgdbcon</title>
<para> The kgdbcon feature allows you to see printk() messages
inside gdb while gdb is connected to the kernel. Kdb does not make
use of the kgdbcon feature.
</para>
<para>Kgdb supports using the gdb serial protocol to send console
messages to the debugger when the debugger is connected and running.
There are two ways to activate this feature.
<orderedlist>
<listitem><para>Activate with the kernel command line option:</para>
<para><constant>kgdbcon</constant></para>
</listitem>
<listitem><para>Use sysfs before configuring an I/O driver</para>
<para>
<constant>echo 1 &gt; /sys/module/kgdb/parameters/kgdb_use_con</constant>
</para>
<para>
NOTE: If you do this after you configure the kgdb I/O driver, the
setting will not take effect until the next point the I/O is
reconfigured.
</para>
</listitem>
</orderedlist>
</para>
<para>IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an
active system console. An example of incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant>
</para>
<para>It is possible to use this option with kgdboc on a tty that is not a system console.
</para>
</sect1>
<sect1 id="kgdbreboot">
<title>Run time parameter: kgdbreboot</title>
<para> The kgdbreboot feature allows you to change how the debugger
deals with the reboot notification. You have 3 choices for the
behavior. The default behavior is always set to 0.</para>
<orderedlist>
<listitem><para>echo -1 > /sys/module/debug_core/parameters/kgdbreboot</para>
<para>Ignore the reboot notification entirely.</para>
</listitem>
<listitem><para>echo 0 > /sys/module/debug_core/parameters/kgdbreboot</para>
<para>Send the detach message to any attached debugger client.</para>
</listitem>
<listitem><para>echo 1 > /sys/module/debug_core/parameters/kgdbreboot</para>
<para>Enter the debugger on reboot notify.</para>
</listitem>
</orderedlist>
</sect1>
</chapter>
<chapter id="usingKDB">
<title>Using kdb</title>
<para>
</para>
<sect1 id="quickKDBserial">
<title>Quick start for kdb on a serial port</title>
<para>This is a quick example of how to use kdb.</para>
<para><orderedlist>
<listitem><para>Configure kgdboc at boot using kernel parameters:
<itemizedlist>
<listitem><para><constant>console=ttyS0,115200 kgdboc=ttyS0,115200</constant></para></listitem>
</itemizedlist></para>
<para>OR</para>
<para>Configure kgdboc after the kernel has booted; assuming you are using a serial port console:
<itemizedlist>
<listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
</itemizedlist>
</para>
</listitem>
<listitem><para>Enter the kernel debugger manually or by waiting for an oops or fault. There are several ways you can enter the kernel debugger manually; all involve using the sysrq-g, which means you must have enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.</para>
<itemizedlist>
<listitem><para>When logged in as root or with a super user session you can run:</para>
<para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
<listitem><para>Example using minicom 2.2</para>
<para>Press: <constant>Control-a</constant></para>
<para>Press: <constant>f</constant></para>
<para>Press: <constant>g</constant></para>
</listitem>
<listitem><para>When you have telneted to a terminal server that supports sending a remote break</para>
<para>Press: <constant>Control-]</constant></para>
<para>Type in:<constant>send break</constant></para>
<para>Press: <constant>Enter</constant></para>
<para>Press: <constant>g</constant></para>
</listitem>
</itemizedlist>
</listitem>
<listitem><para>From the kdb prompt you can run the "help" command to see a complete list of the commands that are available.</para>
<para>Some useful commands in kdb include:
<itemizedlist>
<listitem><para>lsmod -- Shows where kernel modules are loaded</para></listitem>
<listitem><para>ps -- Displays only the active processes</para></listitem>
<listitem><para>ps A -- Shows all the processes</para></listitem>
<listitem><para>summary -- Shows kernel version info and memory usage</para></listitem>
<listitem><para>bt -- Get a backtrace of the current process using dump_stack()</para></listitem>
<listitem><para>dmesg -- View the kernel syslog buffer</para></listitem>
<listitem><para>go -- Continue the system</para></listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>When you are done using kdb you need to consider rebooting the
system or using the "go" command to resuming normal kernel
execution. If you have paused the kernel for a lengthy period of
time, applications that rely on timely networking or anything to do
with real wall clock time could be adversely affected, so you
should take this into consideration when using the kernel
debugger.</para>
</listitem>
</orderedlist></para>
</sect1>
<sect1 id="quickKDBkeyboard">
<title>Quick start for kdb using a keyboard connected console</title>
<para>This is a quick example of how to use kdb with a keyboard.</para>
<para><orderedlist>
<listitem><para>Configure kgdboc at boot using kernel parameters:
<itemizedlist>
<listitem><para><constant>kgdboc=kbd</constant></para></listitem>
</itemizedlist></para>
<para>OR</para>
<para>Configure kgdboc after the kernel has booted:
<itemizedlist>
<listitem><para><constant>echo kbd &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
</itemizedlist>
</para>
</listitem>
<listitem><para>Enter the kernel debugger manually or by waiting for an oops or fault. There are several ways you can enter the kernel debugger manually; all involve using the sysrq-g, which means you must have enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.</para>
<itemizedlist>
<listitem><para>When logged in as root or with a super user session you can run:</para>
<para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
<listitem><para>Example using a laptop keyboard</para>
<para>Press and hold down: <constant>Alt</constant></para>
<para>Press and hold down: <constant>Fn</constant></para>
<para>Press and release the key with the label: <constant>SysRq</constant></para>
<para>Release: <constant>Fn</constant></para>
<para>Press and release: <constant>g</constant></para>
<para>Release: <constant>Alt</constant></para>
</listitem>
<listitem><para>Example using a PS/2 101-key keyboard</para>
<para>Press and hold down: <constant>Alt</constant></para>
<para>Press and release the key with the label: <constant>SysRq</constant></para>
<para>Press and release: <constant>g</constant></para>
<para>Release: <constant>Alt</constant></para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>Now type in a kdb command such as "help", "dmesg", "bt" or "go" to continue kernel execution.</para>
</listitem>
</orderedlist></para>
</sect1>
</chapter>
<chapter id="EnableKGDB">
<title>Using kgdb / gdb</title>
<para>In order to use kgdb you must activate it by passing
configuration information to one of the kgdb I/O drivers. If you
do not pass any configuration information kgdb will not do anything
at all. Kgdb will only actively hook up to the kernel trap hooks
if a kgdb I/O driver is loaded and configured. If you unconfigure
a kgdb I/O driver, kgdb will unregister all the kernel hook points.
</para>
<para> All kgdb I/O drivers can be reconfigured at run time, if
<symbol>CONFIG_SYSFS</symbol> and <symbol>CONFIG_MODULES</symbol>
are enabled, by echo'ing a new config string to
<constant>/sys/module/&lt;driver&gt;/parameter/&lt;option&gt;</constant>.
The driver can be unconfigured by passing an empty string. You cannot
change the configuration while the debugger is attached. Make sure
to detach the debugger with the <constant>detach</constant> command
prior to trying to unconfigure a kgdb I/O driver.
</para>
<sect1 id="ConnectingGDB">
<title>Connecting with gdb to a serial port</title>
<orderedlist>
<listitem><para>Configure kgdboc</para>
<para>Configure kgdboc at boot using kernel parameters:
<itemizedlist>
<listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem>
</itemizedlist></para>
<para>OR</para>
<para>Configure kgdboc after the kernel has booted:
<itemizedlist>
<listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>Stop kernel execution (break into the debugger)</para>
<para>In order to connect to gdb via kgdboc, the kernel must
first be stopped. There are several ways to stop the kernel which
include using kgdbwait as a boot argument, via a sysrq-g, or running
the kernel until it takes an exception where it waits for the
debugger to attach.
<itemizedlist>
<listitem><para>When logged in as root or with a super user session you can run:</para>
<para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
<listitem><para>Example using minicom 2.2</para>
<para>Press: <constant>Control-a</constant></para>
<para>Press: <constant>f</constant></para>
<para>Press: <constant>g</constant></para>
</listitem>
<listitem><para>When you have telneted to a terminal server that supports sending a remote break</para>
<para>Press: <constant>Control-]</constant></para>
<para>Type in:<constant>send break</constant></para>
<para>Press: <constant>Enter</constant></para>
<para>Press: <constant>g</constant></para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>Connect from gdb</para>
<para>
Example (using a directly connected port):
</para>
<programlisting>
% gdb ./vmlinux
(gdb) set remotebaud 115200
(gdb) target remote /dev/ttyS0
</programlisting>
<para>
Example (kgdb to a terminal server on TCP port 2012):
</para>
<programlisting>
% gdb ./vmlinux
(gdb) target remote 192.168.2.2:2012
</programlisting>
<para>
Once connected, you can debug a kernel the way you would debug an
application program.
</para>
<para>
If you are having problems connecting or something is going
seriously wrong while debugging, it will most often be the case
that you want to enable gdb to be verbose about its target
communications. You do this prior to issuing the <constant>target
remote</constant> command by typing in: <constant>set debug remote 1</constant>
</para>
</listitem>
</orderedlist>
<para>Remember if you continue in gdb, and need to "break in" again,
you need to issue an other sysrq-g. It is easy to create a simple
entry point by putting a breakpoint at <constant>sys_sync</constant>
and then you can run "sync" from a shell or script to break into the
debugger.</para>
</sect1>
</chapter>
<chapter id="switchKdbKgdb">
<title>kgdb and kdb interoperability</title>
<para>It is possible to transition between kdb and kgdb dynamically.
The debug core will remember which you used the last time and
automatically start in the same mode.</para>
<sect1>
<title>Switching between kdb and kgdb</title>
<sect2>
<title>Switching from kgdb to kdb</title>
<para>
There are two ways to switch from kgdb to kdb: you can use gdb to
issue a maintenance packet, or you can blindly type the command $3#33.
Whenever the kernel debugger stops in kgdb mode it will print the
message <constant>KGDB or $3#33 for KDB</constant>. It is important
to note that you have to type the sequence correctly in one pass.
You cannot type a backspace or delete because kgdb will interpret
that as part of the debug stream.
<orderedlist>
<listitem><para>Change from kgdb to kdb by blindly typing:</para>
<para><constant>$3#33</constant></para></listitem>
<listitem><para>Change from kgdb to kdb with gdb</para>
<para><constant>maintenance packet 3</constant></para>
<para>NOTE: Now you must kill gdb. Typically you press control-z and
issue the command: kill -9 %</para></listitem>
</orderedlist>
</para>
</sect2>
<sect2>
<title>Change from kdb to kgdb</title>
<para>There are two ways you can change from kdb to kgdb. You can
manually enter kgdb mode by issuing the kgdb command from the kdb
shell prompt, or you can connect gdb while the kdb shell prompt is
active. The kdb shell looks for the typical first commands that gdb
would issue with the gdb remote protocol and if it sees one of those
commands it automatically changes into kgdb mode.</para>
<orderedlist>
<listitem><para>From kdb issue the command:</para>
<para><constant>kgdb</constant></para>
<para>Now disconnect your terminal program and connect gdb in its place</para></listitem>
<listitem><para>At the kdb prompt, disconnect the terminal program and connect gdb in its place.</para></listitem>
</orderedlist>
</sect2>
</sect1>
<sect1>
<title>Running kdb commands from gdb</title>
<para>It is possible to run a limited set of kdb commands from gdb,
using the gdb monitor command. You don't want to execute any of the
run control or breakpoint operations, because it can disrupt the
state of the kernel debugger. You should be using gdb for
breakpoints and run control operations if you have gdb connected.
The more useful commands to run are things like lsmod, dmesg, ps or
possibly some of the memory information commands. To see all the kdb
commands you can run <constant>monitor help</constant>.</para>
<para>Example:
<informalexample><programlisting>
(gdb) monitor ps
1 idle process (state I) and
27 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0xc78291d0 1 0 0 0 S 0xc7829404 init
0xc7954150 942 1 0 0 S 0xc7954384 dropbear
0xc78789c0 944 1 0 0 S 0xc7878bf4 sh
(gdb)
</programlisting></informalexample>
</para>
</sect1>
</chapter>
<chapter id="KGDBTestSuite">
<title>kgdb Test Suite</title>
<para>
When kgdb is enabled in the kernel config you can also elect to
enable the config parameter KGDB_TESTS. Turning this on will
enable a special kgdb I/O module which is designed to test the
kgdb internal functions.
</para>
<para>
The kgdb tests are mainly intended for developers to test the kgdb
internals as well as a tool for developing a new kgdb architecture
specific implementation. These tests are not really for end users
of the Linux kernel. The primary source of documentation would be
to look in the drivers/misc/kgdbts.c file.
</para>
<para>
The kgdb test suite can also be configured at compile time to run
the core set of tests by setting the kernel config parameter
KGDB_TESTS_ON_BOOT. This particular option is aimed at automated
regression testing and does not require modifying the kernel boot
config arguments. If this is turned on, the kgdb test suite can
be disabled by specifying "kgdbts=" as a kernel boot argument.
</para>
</chapter>
<chapter id="CommonBackEndReq">
<title>Kernel Debugger Internals</title>
<sect1 id="kgdbArchitecture">
<title>Architecture Specifics</title>
<para>
The kernel debugger is organized into a number of components:
<orderedlist>
<listitem><para>The debug core</para>
<para>
The debug core is found in kernel/debugger/debug_core.c. It contains:
<itemizedlist>
<listitem><para>A generic OS exception handler which includes
sync'ing the processors into a stopped state on an multi-CPU
system.</para></listitem>
<listitem><para>The API to talk to the kgdb I/O drivers</para></listitem>
<listitem><para>The API to make calls to the arch-specific kgdb implementation</para></listitem>
<listitem><para>The logic to perform safe memory reads and writes to memory while using the debugger</para></listitem>
<listitem><para>A full implementation for software breakpoints unless overridden by the arch</para></listitem>
<listitem><para>The API to invoke either the kdb or kgdb frontend to the debug core.</para></listitem>
<listitem><para>The structures and callback API for atomic kernel mode setting.</para>
<para>NOTE: kgdboc is where the kms callbacks are invoked.</para></listitem>
</itemizedlist>
</para>
</listitem>
<listitem><para>kgdb arch-specific implementation</para>
<para>
This implementation is generally found in arch/*/kernel/kgdb.c.
As an example, arch/x86/kernel/kgdb.c contains the specifics to
implement HW breakpoint as well as the initialization to
dynamically register and unregister for the trap handlers on
this architecture. The arch-specific portion implements:
<itemizedlist>
<listitem><para>contains an arch-specific trap catcher which
invokes kgdb_handle_exception() to start kgdb about doing its
work</para></listitem>
<listitem><para>translation to and from gdb specific packet format to pt_regs</para></listitem>
<listitem><para>Registration and unregistration of architecture specific trap hooks</para></listitem>
<listitem><para>Any special exception handling and cleanup</para></listitem>
<listitem><para>NMI exception handling and cleanup</para></listitem>
<listitem><para>(optional) HW breakpoints</para></listitem>
</itemizedlist>
</para>
</listitem>
<listitem><para>gdbstub frontend (aka kgdb)</para>
<para>The gdbstub is located in kernel/debug/gdbstub.c. It contains:</para>
<itemizedlist>
<listitem><para>All the logic to implement the gdb serial protocol</para></listitem>
</itemizedlist>
</listitem>
<listitem><para>kdb frontend</para>
<para>The kdb debugger shell is broken down into a number of
components. The kdb core is located in kernel/debug/kdb. There
are a number of helper functions in some of the other kernel
components to make it possible for kdb to examine and report
information about the kernel without taking locks that could
cause a kernel deadlock. The kdb core contains implements the following functionality.</para>
<itemizedlist>
<listitem><para>A simple shell</para></listitem>
<listitem><para>The kdb core command set</para></listitem>
<listitem><para>A registration API to register additional kdb shell commands.</para>
<itemizedlist>
<listitem><para>A good example of a self-contained kdb module
is the "ftdump" command for dumping the ftrace buffer. See:
kernel/trace/trace_kdb.c</para></listitem>
<listitem><para>For an example of how to dynamically register
a new kdb command you can build the kdb_hello.ko kernel module
from samples/kdb/kdb_hello.c. To build this example you can
set CONFIG_SAMPLES=y and CONFIG_SAMPLE_KDB=m in your kernel
config. Later run "modprobe kdb_hello" and the next time you
enter the kdb shell, you can run the "hello"
command.</para></listitem>
</itemizedlist></listitem>
<listitem><para>The implementation for kdb_printf() which
emits messages directly to I/O drivers, bypassing the kernel
log.</para></listitem>
<listitem><para>SW / HW breakpoint management for the kdb shell</para></listitem>
</itemizedlist>
</listitem>
<listitem><para>kgdb I/O driver</para>
<para>
Each kgdb I/O driver has to provide an implementation for the following:
<itemizedlist>
<listitem><para>configuration via built-in or module</para></listitem>
<listitem><para>dynamic configuration and kgdb hook registration calls</para></listitem>
<listitem><para>read and write character interface</para></listitem>
<listitem><para>A cleanup handler for unconfiguring from the kgdb core</para></listitem>
<listitem><para>(optional) Early debug methodology</para></listitem>
</itemizedlist>
Any given kgdb I/O driver has to operate very closely with the
hardware and must do it in such a way that does not enable
interrupts or change other parts of the system context without
completely restoring them. The kgdb core will repeatedly "poll"
a kgdb I/O driver for characters when it needs input. The I/O
driver is expected to return immediately if there is no data
available. Doing so allows for the future possibility to touch
watchdog hardware in such a way as to have a target system not
reset when these are enabled.
</para>
</listitem>
</orderedlist>
</para>
<para>
If you are intent on adding kgdb architecture specific support
for a new architecture, the architecture should define
<constant>HAVE_ARCH_KGDB</constant> in the architecture specific
Kconfig file. This will enable kgdb for the architecture, and
at that point you must create an architecture specific kgdb
implementation.
</para>
<para>
There are a few flags which must be set on every architecture in
their &lt;asm/kgdb.h&gt; file. These are:
<itemizedlist>
<listitem>
<para>
NUMREGBYTES: The size in bytes of all of the registers, so
that we can ensure they will all fit into a packet.
</para>
</listitem>
<listitem>
<para>
BUFMAX: The size in bytes of the buffer GDB will read into.
This must be larger than NUMREGBYTES.
</para>
</listitem>
<listitem>
<para>
CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call
flush_cache_range or flush_icache_range. On some architectures,
these functions may not be safe to call on SMP since we keep other
CPUs in a holding pattern.
</para>
</listitem>
</itemizedlist>
</para>
<para>
There are also the following functions for the common backend,
found in kernel/kgdb.c, that must be supplied by the
architecture-specific backend unless marked as (optional), in
which case a default function maybe used if the architecture
does not need to provide a specific implementation.
</para>
!Iinclude/linux/kgdb.h
</sect1>
<sect1 id="kgdbocDesign">
<title>kgdboc internals</title>
<sect2>
<title>kgdboc and uarts</title>
<para>
The kgdboc driver is actually a very thin driver that relies on the
underlying low level to the hardware driver having "polling hooks"
to which the tty driver is attached. In the initial
implementation of kgdboc the serial_core was changed to expose a
low level UART hook for doing polled mode reading and writing of a
single character while in an atomic context. When kgdb makes an I/O
request to the debugger, kgdboc invokes a callback in the serial
core which in turn uses the callback in the UART driver.</para>
<para>
When using kgdboc with a UART, the UART driver must implement two callbacks in the <constant>struct uart_ops</constant>. Example from drivers/8250.c:<programlisting>
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = serial8250_get_poll_char,
.poll_put_char = serial8250_put_poll_char,
#endif
</programlisting>
Any implementation specifics around creating a polling driver use the
<constant>#ifdef CONFIG_CONSOLE_POLL</constant>, as shown above.
Keep in mind that polling hooks have to be implemented in such a way
that they can be called from an atomic context and have to restore
the state of the UART chip on return such that the system can return
to normal when the debugger detaches. You need to be very careful
with any kind of lock you consider, because failing here is most likely
going to mean pressing the reset button.
</para>
</sect2>
<sect2 id="kgdbocKbd">
<title>kgdboc and keyboards</title>
<para>The kgdboc driver contains logic to configure communications
with an attached keyboard. The keyboard infrastructure is only
compiled into the kernel when CONFIG_KDB_KEYBOARD=y is set in the
kernel configuration.</para>
<para>The core polled keyboard driver driver for PS/2 type keyboards
is in drivers/char/kdb_keyboard.c. This driver is hooked into the
debug core when kgdboc populates the callback in the array
called <constant>kdb_poll_funcs[]</constant>. The
kdb_get_kbd_char() is the top-level function which polls hardware
for single character input.
</para>
</sect2>
<sect2 id="kgdbocKms">
<title>kgdboc and kms</title>
<para>The kgdboc driver contains logic to request the graphics
display to switch to a text context when you are using
"kgdboc=kms,kbd", provided that you have a video driver which has a
frame buffer console and atomic kernel mode setting support.</para>
<para>
Every time the kernel
debugger is entered it calls kgdboc_pre_exp_handler() which in turn
calls con_debug_enter() in the virtual console layer. On resuming kernel
execution, the kernel debugger calls kgdboc_post_exp_handler() which
in turn calls con_debug_leave().</para>
<para>Any video driver that wants to be compatible with the kernel
debugger and the atomic kms callbacks must implement the
mode_set_base_atomic, fb_debug_enter and fb_debug_leave operations.
For the fb_debug_enter and fb_debug_leave the option exists to use
the generic drm fb helper functions or implement something custom for
the hardware. The following example shows the initialization of the
.mode_set_base_atomic operation in
drivers/gpu/drm/i915/intel_display.c:
<informalexample>
<programlisting>
static const struct drm_crtc_helper_funcs intel_helper_funcs = {
[...]
.mode_set_base_atomic = intel_pipe_set_base_atomic,
[...]
};
</programlisting>
</informalexample>
</para>
<para>Here is an example of how the i915 driver initializes the fb_debug_enter and fb_debug_leave functions to use the generic drm helpers in
drivers/gpu/drm/i915/intel_fb.c:
<informalexample>
<programlisting>
static struct fb_ops intelfb_ops = {
[...]
.fb_debug_enter = drm_fb_helper_debug_enter,
.fb_debug_leave = drm_fb_helper_debug_leave,
[...]
};
</programlisting>
</informalexample>
</para>
</sect2>
</sect1>
</chapter>
<chapter id="credits">
<title>Credits</title>
<para>
The following people have contributed to this document:
<orderedlist>
<listitem><para>Amit Kale<email>amitkale@linsyssoft.com</email></para></listitem>
<listitem><para>Tom Rini<email>trini@kernel.crashing.org</email></para></listitem>
</orderedlist>
In March 2008 this document was completely rewritten by:
<itemizedlist>
<listitem><para>Jason Wessel<email>jason.wessel@windriver.com</email></para></listitem>
</itemizedlist>
In Jan 2010 this document was updated to include kdb.
<itemizedlist>
<listitem><para>Jason Wessel<email>jason.wessel@windriver.com</email></para></listitem>
</itemizedlist>
</para>
</chapter>
</book>

View File

@ -23,6 +23,7 @@ whole; patches welcome!
kmemleak
kmemcheck
gdb-kernel-debugging
kgdb
.. only:: subproject and html

View File

@ -0,0 +1,930 @@
=================================================
Using kgdb, kdb and the kernel debugger internals
=================================================
:Author: Jason Wessel
Introduction
============
The kernel has two different debugger front ends (kdb and kgdb) which
interface to the debug core. It is possible to use either of the
debugger front ends and dynamically transition between them if you
configure the kernel properly at compile and runtime.
Kdb is simplistic shell-style interface which you can use on a system
console with a keyboard or serial console. You can use it to inspect
memory, registers, process lists, dmesg, and even set breakpoints to
stop in a certain location. Kdb is not a source level debugger, although
you can set breakpoints and execute some basic kernel run control. Kdb
is mainly aimed at doing some analysis to aid in development or
diagnosing kernel problems. You can access some symbols by name in
kernel built-ins or in kernel modules if the code was built with
``CONFIG_KALLSYMS``.
Kgdb is intended to be used as a source level debugger for the Linux
kernel. It is used along with gdb to debug a Linux kernel. The
expectation is that gdb can be used to "break in" to the kernel to
inspect memory, variables and look through call stack information
similar to the way an application developer would use gdb to debug an
application. It is possible to place breakpoints in kernel code and
perform some limited execution stepping.
Two machines are required for using kgdb. One of these machines is a
development machine and the other is the target machine. The kernel to
be debugged runs on the target machine. The development machine runs an
instance of gdb against the vmlinux file which contains the symbols (not
a boot image such as bzImage, zImage, uImage...). In gdb the developer
specifies the connection parameters and connects to kgdb. The type of
connection a developer makes with gdb depends on the availability of
kgdb I/O modules compiled as built-ins or loadable kernel modules in the
test machine's kernel.
Compiling a kernel
==================
- In order to enable compilation of kdb, you must first enable kgdb.
- The kgdb test compile options are described in the kgdb test suite
chapter.
Kernel config options for kgdb
------------------------------
To enable ``CONFIG_KGDB`` you should look under "Kernel hacking" /
"Kernel debugging" and select "KGDB: kernel debugger".
While it is not a hard requirement that you have symbols in your vmlinux
file, gdb tends not to be very useful without the symbolic data, so you
will want to turn on ``CONFIG_DEBUG_INFO`` which is called "Compile the
kernel with debug info" in the config menu.
It is advised, but not required, that you turn on the
``CONFIG_FRAME_POINTER`` kernel option which is called "Compile the
kernel with frame pointers" in the config menu. This option inserts code
to into the compiled executable which saves the frame information in
registers or on the stack at different points which allows a debugger
such as gdb to more accurately construct stack back traces while
debugging the kernel.
If the architecture that you are using supports the kernel option
CONFIG_STRICT_KERNEL_RWX, you should consider turning it off. This
option will prevent the use of software breakpoints because it marks
certain regions of the kernel's memory space as read-only. If kgdb
supports it for the architecture you are using, you can use hardware
breakpoints if you desire to run with the CONFIG_STRICT_KERNEL_RWX
option turned on, else you need to turn off this option.
Next you should choose one of more I/O drivers to interconnect debugging
host and debugged target. Early boot debugging requires a KGDB I/O
driver that supports early debugging and the driver must be built into
the kernel directly. Kgdb I/O driver configuration takes place via
kernel or module parameters which you can learn more about in the in the
section that describes the parameter "kgdboc".
Here is an example set of .config symbols to enable or disable for kgdb:
- # CONFIG_STRICT_KERNEL_RWX is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_KGDB=y
- CONFIG_KGDB_SERIAL_CONSOLE=y
Kernel config options for kdb
-----------------------------
Kdb is quite a bit more complex than the simple gdbstub sitting on top
of the kernel's debug core. Kdb must implement a shell, and also adds
some helper functions in other parts of the kernel, responsible for
printing out interesting data such as what you would see if you ran
"lsmod", or "ps". In order to build kdb into the kernel you follow the
same steps as you would for kgdb.
The main config option for kdb is ``CONFIG_KGDB_KDB`` which is called
"KGDB_KDB: include kdb frontend for kgdb" in the config menu. In theory
you would have already also selected an I/O driver such as the
CONFIG_KGDB_SERIAL_CONSOLE interface if you plan on using kdb on a
serial port, when you were configuring kgdb.
If you want to use a PS/2-style keyboard with kdb, you would select
CONFIG_KDB_KEYBOARD which is called "KGDB_KDB: keyboard as input
device" in the config menu. The CONFIG_KDB_KEYBOARD option is not used
for anything in the gdb interface to kgdb. The CONFIG_KDB_KEYBOARD
option only works with kdb.
Here is an example set of .config symbols to enable/disable kdb:
- # CONFIG_STRICT_KERNEL_RWX is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_KGDB=y
- CONFIG_KGDB_SERIAL_CONSOLE=y
- CONFIG_KGDB_KDB=y
- CONFIG_KDB_KEYBOARD=y
Kernel Debugger Boot Arguments
==============================
This section describes the various runtime kernel parameters that affect
the configuration of the kernel debugger. The following chapter covers
using kdb and kgdb as well as providing some examples of the
configuration parameters.
Kernel parameter: kgdboc
------------------------
The kgdboc driver was originally an abbreviation meant to stand for
"kgdb over console". Today it is the primary mechanism to configure how
to communicate from gdb to kgdb as well as the devices you want to use
to interact with the kdb shell.
For kgdb/gdb, kgdboc is designed to work with a single serial port. It
is intended to cover the circumstance where you want to use a serial
console as your primary console as well as using it to perform kernel
debugging. It is also possible to use kgdb on a serial port which is not
designated as a system console. Kgdboc may be configured as a kernel
built-in or a kernel loadable module. You can only make use of
``kgdbwait`` and early debugging if you build kgdboc into the kernel as
a built-in.
Optionally you can elect to activate kms (Kernel Mode Setting)
integration. When you use kms with kgdboc and you have a video driver
that has atomic mode setting hooks, it is possible to enter the debugger
on the graphics console. When the kernel execution is resumed, the
previous graphics mode will be restored. This integration can serve as a
useful tool to aid in diagnosing crashes or doing analysis of memory
with kdb while allowing the full graphics console applications to run.
kgdboc arguments
~~~~~~~~~~~~~~~~
Usage: ``kgdboc=[kms][[,]kbd][[,]serial_device][,baud]``
The order listed above must be observed if you use any of the optional
configurations together.
Abbreviations:
- kms = Kernel Mode Setting
- kbd = Keyboard
You can configure kgdboc to use the keyboard, and/or a serial device
depending on if you are using kdb and/or kgdb, in one of the following
scenarios. The order listed above must be observed if you use any of the
optional configurations together. Using kms + only gdb is generally not
a useful combination.
Using loadable module or built-in
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1. As a kernel built-in:
Use the kernel boot argument: ``kgdboc=<tty-device>,[baud]``
2. As a kernel loadable module:
Use the command: ``modprobe kgdboc kgdboc=<tty-device>,[baud]``
Here are two examples of how you might format the kgdboc string. The
first is for an x86 target using the first serial port. The second
example is for the ARM Versatile AB using the second serial port.
1. ``kgdboc=ttyS0,115200``
2. ``kgdboc=ttyAMA1,115200``
Configure kgdboc at runtime with sysfs
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
At run time you can enable or disable kgdboc by echoing a parameters
into the sysfs. Here are two examples:
1. Enable kgdboc on ttyS0
``echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc``
2. Disable kgdboc
``echo "" > /sys/module/kgdboc/parameters/kgdboc``
NOTE: You do not need to specify the baud if you are configuring the
console on tty which is already configured or open.
More examples
^^^^^^^^^^^^^
You can configure kgdboc to use the keyboard, and/or a serial device
depending on if you are using kdb and/or kgdb, in one of the following
scenarios.
1. kdb and kgdb over only a serial port
``kgdboc=<serial_device>[,baud]``
Example: ``kgdboc=ttyS0,115200``
2. kdb and kgdb with keyboard and a serial port
``kgdboc=kbd,<serial_device>[,baud]``
Example: ``kgdboc=kbd,ttyS0,115200``
3. kdb with a keyboard
``kgdboc=kbd``
4. kdb with kernel mode setting
``kgdboc=kms,kbd``
5. kdb with kernel mode setting and kgdb over a serial port
``kgdboc=kms,kbd,ttyS0,115200``
NOTE: Kgdboc does not support interrupting the target via the gdb remote
protocol. You must manually send a sysrq-g unless you have a proxy that
splits console output to a terminal program. A console proxy has a
separate TCP port for the debugger and a separate TCP port for the
"human" console. The proxy can take care of sending the sysrq-g for you.
When using kgdboc with no debugger proxy, you can end up connecting the
debugger at one of two entry points. If an exception occurs after you
have loaded kgdboc, a message should print on the console stating it is
waiting for the debugger. In this case you disconnect your terminal
program and then connect the debugger in its place. If you want to
interrupt the target system and forcibly enter a debug session you have
to issue a Sysrq sequence and then type the letter ``g``. Then you
disconnect the terminal session and connect gdb. Your options if you
don't like this are to hack gdb to send the sysrq-g for you as well as
on the initial connect, or to use a debugger proxy that allows an
unmodified gdb to do the debugging.
Kernel parameter: kgdbwait
--------------------------
The Kernel command line option ``kgdbwait`` makes kgdb wait for a
debugger connection during booting of a kernel. You can only use this
option if you compiled a kgdb I/O driver into the kernel and you
specified the I/O driver configuration as a kernel command line option.
The kgdbwait parameter should always follow the configuration parameter
for the kgdb I/O driver in the kernel command line else the I/O driver
will not be configured prior to asking the kernel to use it to wait.
The kernel will stop and wait as early as the I/O driver and
architecture allows when you use this option. If you build the kgdb I/O
driver as a loadable kernel module kgdbwait will not do anything.
Kernel parameter: kgdbcon
-------------------------
The kgdbcon feature allows you to see printk() messages inside gdb while
gdb is connected to the kernel. Kdb does not make use of the kgdbcon
feature.
Kgdb supports using the gdb serial protocol to send console messages to
the debugger when the debugger is connected and running. There are two
ways to activate this feature.
1. Activate with the kernel command line option:
``kgdbcon``
2. Use sysfs before configuring an I/O driver
``echo 1 > /sys/module/kgdb/parameters/kgdb_use_con``
NOTE: If you do this after you configure the kgdb I/O driver, the
setting will not take effect until the next point the I/O is
reconfigured.
IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an
active system console. An example of incorrect usage is
``console=ttyS0,115200 kgdboc=ttyS0 kgdbcon``
It is possible to use this option with kgdboc on a tty that is not a
system console.
Run time parameter: kgdbreboot
------------------------------
The kgdbreboot feature allows you to change how the debugger deals with
the reboot notification. You have 3 choices for the behavior. The
default behavior is always set to 0.
1. echo -1 > /sys/module/debug_core/parameters/kgdbreboot
Ignore the reboot notification entirely.
2. echo 0 > /sys/module/debug_core/parameters/kgdbreboot
Send the detach message to any attached debugger client.
3. echo 1 > /sys/module/debug_core/parameters/kgdbreboot
Enter the debugger on reboot notify.
Using kdb
=========
Quick start for kdb on a serial port
------------------------------------
This is a quick example of how to use kdb.
1. Configure kgdboc at boot using kernel parameters:
- ``console=ttyS0,115200 kgdboc=ttyS0,115200``
OR
Configure kgdboc after the kernel has booted; assuming you are using
a serial port console:
- ``echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc``
2. Enter the kernel debugger manually or by waiting for an oops or
fault. There are several ways you can enter the kernel debugger
manually; all involve using the sysrq-g, which means you must have
enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.
- When logged in as root or with a super user session you can run:
``echo g > /proc/sysrq-trigger``
- Example using minicom 2.2
Press: ``Control-a``
Press: ``f``
Press: ``g``
- When you have telneted to a terminal server that supports sending
a remote break
Press: ``Control-]``
Type in:\ ``send break``
Press: ``Enter``
Press: ``g``
3. From the kdb prompt you can run the "help" command to see a complete
list of the commands that are available.
Some useful commands in kdb include:
- lsmod -- Shows where kernel modules are loaded
- ps -- Displays only the active processes
- ps A -- Shows all the processes
- summary -- Shows kernel version info and memory usage
- bt -- Get a backtrace of the current process using dump_stack()
- dmesg -- View the kernel syslog buffer
- go -- Continue the system
4. When you are done using kdb you need to consider rebooting the system
or using the "go" command to resuming normal kernel execution. If you
have paused the kernel for a lengthy period of time, applications
that rely on timely networking or anything to do with real wall clock
time could be adversely affected, so you should take this into
consideration when using the kernel debugger.
Quick start for kdb using a keyboard connected console
------------------------------------------------------
This is a quick example of how to use kdb with a keyboard.
1. Configure kgdboc at boot using kernel parameters:
- ``kgdboc=kbd``
OR
Configure kgdboc after the kernel has booted:
- ``echo kbd > /sys/module/kgdboc/parameters/kgdboc``
2. Enter the kernel debugger manually or by waiting for an oops or
fault. There are several ways you can enter the kernel debugger
manually; all involve using the sysrq-g, which means you must have
enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.
- When logged in as root or with a super user session you can run:
``echo g > /proc/sysrq-trigger``
- Example using a laptop keyboard
Press and hold down: ``Alt``
Press and hold down: ``Fn``
Press and release the key with the label: ``SysRq``
Release: ``Fn``
Press and release: ``g``
Release: ``Alt``
- Example using a PS/2 101-key keyboard
Press and hold down: ``Alt``
Press and release the key with the label: ``SysRq``
Press and release: ``g``
Release: ``Alt``
3. Now type in a kdb command such as "help", "dmesg", "bt" or "go" to
continue kernel execution.
Using kgdb / gdb
================
In order to use kgdb you must activate it by passing configuration
information to one of the kgdb I/O drivers. If you do not pass any
configuration information kgdb will not do anything at all. Kgdb will
only actively hook up to the kernel trap hooks if a kgdb I/O driver is
loaded and configured. If you unconfigure a kgdb I/O driver, kgdb will
unregister all the kernel hook points.
All kgdb I/O drivers can be reconfigured at run time, if
``CONFIG_SYSFS`` and ``CONFIG_MODULES`` are enabled, by echo'ing a new
config string to ``/sys/module/<driver>/parameter/<option>``. The driver
can be unconfigured by passing an empty string. You cannot change the
configuration while the debugger is attached. Make sure to detach the
debugger with the ``detach`` command prior to trying to unconfigure a
kgdb I/O driver.
Connecting with gdb to a serial port
------------------------------------
1. Configure kgdboc
Configure kgdboc at boot using kernel parameters:
- ``kgdboc=ttyS0,115200``
OR
Configure kgdboc after the kernel has booted:
- ``echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc``
2. Stop kernel execution (break into the debugger)
In order to connect to gdb via kgdboc, the kernel must first be
stopped. There are several ways to stop the kernel which include
using kgdbwait as a boot argument, via a sysrq-g, or running the
kernel until it takes an exception where it waits for the debugger to
attach.
- When logged in as root or with a super user session you can run:
``echo g > /proc/sysrq-trigger``
- Example using minicom 2.2
Press: ``Control-a``
Press: ``f``
Press: ``g``
- When you have telneted to a terminal server that supports sending
a remote break
Press: ``Control-]``
Type in:\ ``send break``
Press: ``Enter``
Press: ``g``
3. Connect from gdb
Example (using a directly connected port):
::
% gdb ./vmlinux
(gdb) set remotebaud 115200
(gdb) target remote /dev/ttyS0
Example (kgdb to a terminal server on TCP port 2012):
::
% gdb ./vmlinux
(gdb) target remote 192.168.2.2:2012
Once connected, you can debug a kernel the way you would debug an
application program.
If you are having problems connecting or something is going seriously
wrong while debugging, it will most often be the case that you want
to enable gdb to be verbose about its target communications. You do
this prior to issuing the ``target
remote`` command by typing in: ``set debug remote 1``
Remember if you continue in gdb, and need to "break in" again, you need
to issue an other sysrq-g. It is easy to create a simple entry point by
putting a breakpoint at ``sys_sync`` and then you can run "sync" from a
shell or script to break into the debugger.
kgdb and kdb interoperability
=============================
It is possible to transition between kdb and kgdb dynamically. The debug
core will remember which you used the last time and automatically start
in the same mode.
Switching between kdb and kgdb
------------------------------
Switching from kgdb to kdb
~~~~~~~~~~~~~~~~~~~~~~~~~~
There are two ways to switch from kgdb to kdb: you can use gdb to issue
a maintenance packet, or you can blindly type the command $3#33.
Whenever the kernel debugger stops in kgdb mode it will print the
message ``KGDB or $3#33 for KDB``. It is important to note that you have
to type the sequence correctly in one pass. You cannot type a backspace
or delete because kgdb will interpret that as part of the debug stream.
1. Change from kgdb to kdb by blindly typing:
``$3#33``
2. Change from kgdb to kdb with gdb
``maintenance packet 3``
NOTE: Now you must kill gdb. Typically you press control-z and issue
the command: kill -9 %
Change from kdb to kgdb
~~~~~~~~~~~~~~~~~~~~~~~
There are two ways you can change from kdb to kgdb. You can manually
enter kgdb mode by issuing the kgdb command from the kdb shell prompt,
or you can connect gdb while the kdb shell prompt is active. The kdb
shell looks for the typical first commands that gdb would issue with the
gdb remote protocol and if it sees one of those commands it
automatically changes into kgdb mode.
1. From kdb issue the command:
``kgdb``
Now disconnect your terminal program and connect gdb in its place
2. At the kdb prompt, disconnect the terminal program and connect gdb in
its place.
Running kdb commands from gdb
-----------------------------
It is possible to run a limited set of kdb commands from gdb, using the
gdb monitor command. You don't want to execute any of the run control or
breakpoint operations, because it can disrupt the state of the kernel
debugger. You should be using gdb for breakpoints and run control
operations if you have gdb connected. The more useful commands to run
are things like lsmod, dmesg, ps or possibly some of the memory
information commands. To see all the kdb commands you can run
``monitor help``.
Example:
.. raw:: html
<div class="informalexample">
::
(gdb) monitor ps
1 idle process (state I) and
27 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr Pid Parent [*] cpu State Thread Command
0xc78291d0 1 0 0 0 S 0xc7829404 init
0xc7954150 942 1 0 0 S 0xc7954384 dropbear
0xc78789c0 944 1 0 0 S 0xc7878bf4 sh
(gdb)
.. raw:: html
</div>
kgdb Test Suite
===============
When kgdb is enabled in the kernel config you can also elect to enable
the config parameter KGDB_TESTS. Turning this on will enable a special
kgdb I/O module which is designed to test the kgdb internal functions.
The kgdb tests are mainly intended for developers to test the kgdb
internals as well as a tool for developing a new kgdb architecture
specific implementation. These tests are not really for end users of the
Linux kernel. The primary source of documentation would be to look in
the drivers/misc/kgdbts.c file.
The kgdb test suite can also be configured at compile time to run the
core set of tests by setting the kernel config parameter
KGDB_TESTS_ON_BOOT. This particular option is aimed at automated
regression testing and does not require modifying the kernel boot config
arguments. If this is turned on, the kgdb test suite can be disabled by
specifying "kgdbts=" as a kernel boot argument.
Kernel Debugger Internals
=========================
Architecture Specifics
----------------------
The kernel debugger is organized into a number of components:
1. The debug core
The debug core is found in kernel/debugger/debug_core.c. It
contains:
- A generic OS exception handler which includes sync'ing the
processors into a stopped state on an multi-CPU system.
- The API to talk to the kgdb I/O drivers
- The API to make calls to the arch-specific kgdb implementation
- The logic to perform safe memory reads and writes to memory while
using the debugger
- A full implementation for software breakpoints unless overridden
by the arch
- The API to invoke either the kdb or kgdb frontend to the debug
core.
- The structures and callback API for atomic kernel mode setting.
NOTE: kgdboc is where the kms callbacks are invoked.
2. kgdb arch-specific implementation
This implementation is generally found in arch/\*/kernel/kgdb.c. As
an example, arch/x86/kernel/kgdb.c contains the specifics to
implement HW breakpoint as well as the initialization to dynamically
register and unregister for the trap handlers on this architecture.
The arch-specific portion implements:
- contains an arch-specific trap catcher which invokes
kgdb_handle_exception() to start kgdb about doing its work
- translation to and from gdb specific packet format to pt_regs
- Registration and unregistration of architecture specific trap
hooks
- Any special exception handling and cleanup
- NMI exception handling and cleanup
- (optional) HW breakpoints
3. gdbstub frontend (aka kgdb)
The gdbstub is located in kernel/debug/gdbstub.c. It contains:
- All the logic to implement the gdb serial protocol
4. kdb frontend
The kdb debugger shell is broken down into a number of components.
The kdb core is located in kernel/debug/kdb. There are a number of
helper functions in some of the other kernel components to make it
possible for kdb to examine and report information about the kernel
without taking locks that could cause a kernel deadlock. The kdb core
contains implements the following functionality.
- A simple shell
- The kdb core command set
- A registration API to register additional kdb shell commands.
- A good example of a self-contained kdb module is the "ftdump"
command for dumping the ftrace buffer. See:
kernel/trace/trace_kdb.c
- For an example of how to dynamically register a new kdb command
you can build the kdb_hello.ko kernel module from
samples/kdb/kdb_hello.c. To build this example you can set
CONFIG_SAMPLES=y and CONFIG_SAMPLE_KDB=m in your kernel
config. Later run "modprobe kdb_hello" and the next time you
enter the kdb shell, you can run the "hello" command.
- The implementation for kdb_printf() which emits messages directly
to I/O drivers, bypassing the kernel log.
- SW / HW breakpoint management for the kdb shell
5. kgdb I/O driver
Each kgdb I/O driver has to provide an implementation for the
following:
- configuration via built-in or module
- dynamic configuration and kgdb hook registration calls
- read and write character interface
- A cleanup handler for unconfiguring from the kgdb core
- (optional) Early debug methodology
Any given kgdb I/O driver has to operate very closely with the
hardware and must do it in such a way that does not enable interrupts
or change other parts of the system context without completely
restoring them. The kgdb core will repeatedly "poll" a kgdb I/O
driver for characters when it needs input. The I/O driver is expected
to return immediately if there is no data available. Doing so allows
for the future possibility to touch watchdog hardware in such a way
as to have a target system not reset when these are enabled.
If you are intent on adding kgdb architecture specific support for a new
architecture, the architecture should define ``HAVE_ARCH_KGDB`` in the
architecture specific Kconfig file. This will enable kgdb for the
architecture, and at that point you must create an architecture specific
kgdb implementation.
There are a few flags which must be set on every architecture in their
<asm/kgdb.h> file. These are:
- NUMREGBYTES: The size in bytes of all of the registers, so that we
can ensure they will all fit into a packet.
- BUFMAX: The size in bytes of the buffer GDB will read into. This must
be larger than NUMREGBYTES.
- CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call
flush_cache_range or flush_icache_range. On some architectures,
these functions may not be safe to call on SMP since we keep other
CPUs in a holding pattern.
There are also the following functions for the common backend, found in
kernel/kgdb.c, that must be supplied by the architecture-specific
backend unless marked as (optional), in which case a default function
maybe used if the architecture does not need to provide a specific
implementation.
.. kernel-doc:: include/linux/kgdb.h
:internal:
kgdboc internals
----------------
kgdboc and uarts
~~~~~~~~~~~~~~~~
The kgdboc driver is actually a very thin driver that relies on the
underlying low level to the hardware driver having "polling hooks" to
which the tty driver is attached. In the initial implementation of
kgdboc the serial_core was changed to expose a low level UART hook for
doing polled mode reading and writing of a single character while in an
atomic context. When kgdb makes an I/O request to the debugger, kgdboc
invokes a callback in the serial core which in turn uses the callback in
the UART driver.
When using kgdboc with a UART, the UART driver must implement two
callbacks in the ``struct uart_ops``. Example from drivers/8250.c:
::
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = serial8250_get_poll_char,
.poll_put_char = serial8250_put_poll_char,
#endif
Any implementation specifics around creating a polling driver use the
``#ifdef CONFIG_CONSOLE_POLL``, as shown above. Keep in mind that
polling hooks have to be implemented in such a way that they can be
called from an atomic context and have to restore the state of the UART
chip on return such that the system can return to normal when the
debugger detaches. You need to be very careful with any kind of lock you
consider, because failing here is most likely going to mean pressing the
reset button.
kgdboc and keyboards
~~~~~~~~~~~~~~~~~~~~
The kgdboc driver contains logic to configure communications with an
attached keyboard. The keyboard infrastructure is only compiled into the
kernel when CONFIG_KDB_KEYBOARD=y is set in the kernel configuration.
The core polled keyboard driver driver for PS/2 type keyboards is in
drivers/char/kdb_keyboard.c. This driver is hooked into the debug core
when kgdboc populates the callback in the array called
``kdb_poll_funcs[]``. The kdb_get_kbd_char() is the top-level
function which polls hardware for single character input.
kgdboc and kms
~~~~~~~~~~~~~~
The kgdboc driver contains logic to request the graphics display to
switch to a text context when you are using "kgdboc=kms,kbd", provided
that you have a video driver which has a frame buffer console and atomic
kernel mode setting support.
Every time the kernel debugger is entered it calls
kgdboc_pre_exp_handler() which in turn calls con_debug_enter() in
the virtual console layer. On resuming kernel execution, the kernel
debugger calls kgdboc_post_exp_handler() which in turn calls
con_debug_leave().
Any video driver that wants to be compatible with the kernel debugger
and the atomic kms callbacks must implement the mode_set_base_atomic,
fb_debug_enter and fb_debug_leave operations. For the
fb_debug_enter and fb_debug_leave the option exists to use the
generic drm fb helper functions or implement something custom for the
hardware. The following example shows the initialization of the
.mode_set_base_atomic operation in
drivers/gpu/drm/i915/intel_display.c:
.. raw:: html
<div class="informalexample">
::
static const struct drm_crtc_helper_funcs intel_helper_funcs = {
[...]
.mode_set_base_atomic = intel_pipe_set_base_atomic,
[...]
};
.. raw:: html
</div>
Here is an example of how the i915 driver initializes the
fb_debug_enter and fb_debug_leave functions to use the generic drm
helpers in drivers/gpu/drm/i915/intel_fb.c:
.. raw:: html
<div class="informalexample">
::
static struct fb_ops intelfb_ops = {
[...]
.fb_debug_enter = drm_fb_helper_debug_enter,
.fb_debug_leave = drm_fb_helper_debug_leave,
[...]
};
.. raw:: html
</div>
Credits
=======
The following people have contributed to this document:
1. Amit Kale\ amitkale@linsyssoft.com
2. Tom Rini\ trini@kernel.crashing.org
In March 2008 this document was completely rewritten by:
- Jason Wessel\ jason.wessel@windriver.com
In Jan 2010 this document was updated to include kdb.
- Jason Wessel\ jason.wessel@windriver.com