arm: add PW-SH1 - PW-SH6 device tree
This commit is contained in:
parent
404cd6aca8
commit
7c40cc26d0
|
@ -742,7 +742,12 @@ dtb-$(CONFIG_ARCH_MXS) += \
|
|||
imx28-sps1.dtb \
|
||||
imx28-ts4600.dtb \
|
||||
imx28-tx28.dtb \
|
||||
imx28-pwsh1.dtb
|
||||
imx28-pwsh1.dtb \
|
||||
imx28-pwsh2.dtb \
|
||||
imx28-pwsh3.dtb \
|
||||
imx28-pwsh4.dtb \
|
||||
imx28-pwsh5.dtb \
|
||||
imx28-pwsh6.dtb
|
||||
dtb-$(CONFIG_ARCH_NOMADIK) += \
|
||||
ste-nomadik-s8815.dtb \
|
||||
ste-nomadik-nhk15.dtb
|
||||
|
|
|
@ -0,0 +1,277 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// Copyright 2012 Freescale Semiconductor, Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SHARP Brain PW-SH1";
|
||||
compatible = "sharp,pw-sh1", "fsl,imx28";
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x40000000 0x08000000>;
|
||||
};
|
||||
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_vddio_sd0: regulator-vddio-sd0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vddio-sd0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 28 0>;
|
||||
};
|
||||
|
||||
reg_fec_3v3: regulator-fec-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fec-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 15 0>;
|
||||
};
|
||||
|
||||
reg_usb0_vbus: regulator-usb0-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb0_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 9 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_lcd_3v3: regulator-lcd-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 30 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_can_3v3: regulator-can-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "can-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 13 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_lcd_5v: regulator-lcd-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd-5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
ssp0: spi@80010000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_8bit_pins_a
|
||||
&mmc0_cd_cfg &mmc0_sck_cfg>;
|
||||
bus-width = <8>;
|
||||
wp-gpios = <&gpio2 12 0>;
|
||||
vmmc-supply = <®_vddio_sd0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssp1: spi@80012000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_4bit_pins_a
|
||||
&mmc1_cd_cfg &mmc1_sck_cfg>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hog_pins_3v3_pullup &hog_pins_3v3_nopull &hog_pins_1v8_nopull>;
|
||||
|
||||
hog_pins_3v3_pullup: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_GPMI_CLE__GPIO_0_27
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
hog_pins_3v3_nopull: hog@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SSP1_CMD__GPIO_2_13
|
||||
MX28_PAD_SSP1_DATA3__GPIO_2_15
|
||||
MX28_PAD_ENET0_RX_CLK__GPIO_4_13
|
||||
MX28_PAD_SSP1_SCK__GPIO_2_12
|
||||
MX28_PAD_PWM3__GPIO_3_28
|
||||
MX28_PAD_AUART2_RX__GPIO_3_8
|
||||
MX28_PAD_AUART2_TX__GPIO_3_9
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
hog_pins_1v8_nopull: hog@2 {
|
||||
reg = <2>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_GPMI_ALE__GPIO_0_26
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_LOW>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcd_backlight: pwm@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_AUART1_RX__PWM_0
|
||||
MX28_PAD_AUART1_TX__PWM_1
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins: lcdif@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_LCD_D00__LCD_D0
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
MX28_PAD_LCD_RD_E__LCD_RD_E
|
||||
MX28_PAD_LCD_WR_RWN__LCD_WR_RWN
|
||||
MX28_PAD_LCD_RS__LCD_RS
|
||||
MX28_PAD_LCD_CS__LCD_CS
|
||||
MX28_PAD_LCD_RESET__LCD_VSYNC
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_LOW>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
brainlcd: lcdif@80030000 {
|
||||
compatible = "sharp,brainlcd";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_pins>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
saif0: saif@80042000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
saif1: saif@80046000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif1_pins_a>;
|
||||
fsl,saif-master = <&saif0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
lradc@80050000 {
|
||||
status = "okay";
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
fsl,ave-ctrl = <4>;
|
||||
fsl,ave-delay = <2>;
|
||||
fsl,settling = <10>;
|
||||
};
|
||||
|
||||
i2c0: i2c@80058000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
sgtl5000: codec@a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
#sound-dai-cells = <0>;
|
||||
VDDA-supply = <®_3p3v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
clocks = <&saif0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1: i2c@8005a000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_backlight>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
duart: serial@80074000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&duart_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy0: usbphy@8007c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy1: usbphy@8007e000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
usb0: usb@80080000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_id_pins_a>;
|
||||
vbus-supply = <®_usb0_vbus>;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx28-evk-sgtl5000",
|
||||
"fsl,mxs-audio-sgtl5000";
|
||||
model = "imx28-evk-sgtl5000";
|
||||
saif-controllers = <&saif0 &saif1>;
|
||||
audio-codec = <&sgtl5000>;
|
||||
};
|
||||
|
||||
backlight_display: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 50000>, <&pwm 1 50000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <4>; //Set 4 for identification on probing
|
||||
};
|
||||
};
|
|
@ -3,287 +3,25 @@
|
|||
// Copyright 2012 Freescale Semiconductor, Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28.dtsi"
|
||||
#include "imx28-brain.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SHARP Brain PW-SH1";
|
||||
compatible = "sharp,pw-sh1", "fsl,imx28";
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x40000000 0x08000000>;
|
||||
};
|
||||
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_vddio_sd0: regulator-vddio-sd0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vddio-sd0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 28 0>;
|
||||
};
|
||||
|
||||
reg_fec_3v3: regulator-fec-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fec-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 15 0>;
|
||||
};
|
||||
|
||||
reg_usb0_vbus: regulator-usb0-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb0_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 9 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_lcd_3v3: regulator-lcd-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 30 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_can_3v3: regulator-can-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "can-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 13 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_lcd_5v: regulator-lcd-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd-5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
ssp0: spi@80010000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_8bit_pins_a
|
||||
&mmc0_cd_cfg &mmc0_sck_cfg>;
|
||||
bus-width = <8>;
|
||||
wp-gpios = <&gpio2 12 0>;
|
||||
vmmc-supply = <®_vddio_sd0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssp1: spi@80012000 {
|
||||
compatible = "fsl,imx28-mmc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_4bit_pins_a
|
||||
&mmc1_cd_cfg &mmc1_sck_cfg>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hog_pins_3v3_pullup &hog_pins_3v3_nopull &hog_pins_1v8_nopull>;
|
||||
|
||||
hog_pins_3v3_pullup: hog@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_GPMI_CLE__GPIO_0_27
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_ENABLE>;
|
||||
};
|
||||
|
||||
hog_pins_3v3_nopull: hog@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_SSP1_CMD__GPIO_2_13
|
||||
MX28_PAD_SSP1_DATA3__GPIO_2_15
|
||||
MX28_PAD_ENET0_RX_CLK__GPIO_4_13
|
||||
MX28_PAD_SSP1_SCK__GPIO_2_12
|
||||
MX28_PAD_PWM3__GPIO_3_28
|
||||
MX28_PAD_AUART2_RX__GPIO_3_8
|
||||
MX28_PAD_AUART2_TX__GPIO_3_9
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
hog_pins_1v8_nopull: hog@2 {
|
||||
reg = <2>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_GPMI_ALE__GPIO_0_26
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_LOW>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcd_backlight: pwm@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_AUART1_RX__PWM_0
|
||||
MX28_PAD_AUART1_TX__PWM_1
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_HIGH>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
|
||||
lcdif_pins: lcdif@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
MX28_PAD_LCD_D00__LCD_D0
|
||||
MX28_PAD_LCD_D01__LCD_D1
|
||||
MX28_PAD_LCD_D02__LCD_D2
|
||||
MX28_PAD_LCD_D03__LCD_D3
|
||||
MX28_PAD_LCD_D04__LCD_D4
|
||||
MX28_PAD_LCD_D05__LCD_D5
|
||||
MX28_PAD_LCD_D06__LCD_D6
|
||||
MX28_PAD_LCD_D07__LCD_D7
|
||||
MX28_PAD_LCD_D08__LCD_D8
|
||||
MX28_PAD_LCD_D09__LCD_D9
|
||||
MX28_PAD_LCD_D10__LCD_D10
|
||||
MX28_PAD_LCD_D11__LCD_D11
|
||||
MX28_PAD_LCD_D12__LCD_D12
|
||||
MX28_PAD_LCD_D13__LCD_D13
|
||||
MX28_PAD_LCD_D14__LCD_D14
|
||||
MX28_PAD_LCD_D15__LCD_D15
|
||||
MX28_PAD_LCD_RD_E__LCD_RD_E
|
||||
MX28_PAD_LCD_WR_RWN__LCD_WR_RWN
|
||||
MX28_PAD_LCD_RS__LCD_RS
|
||||
MX28_PAD_LCD_CS__LCD_CS
|
||||
MX28_PAD_LCD_RESET__LCD_VSYNC
|
||||
>;
|
||||
fsl,drive-strength = <MXS_DRIVE_4mA>;
|
||||
fsl,voltage = <MXS_VOLTAGE_LOW>;
|
||||
fsl,pull-up = <MXS_PULL_DISABLE>;
|
||||
};
|
||||
};
|
||||
|
||||
lcdif@80030000 {
|
||||
compatible = "sharp,brainlcd";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_pins>;
|
||||
status = "okay";
|
||||
|
||||
sharp,lcd-width = <800>;
|
||||
sharp,lcd-height = <480>;
|
||||
|
||||
sharp,mac-transpose;
|
||||
sharp,mac-inversion;
|
||||
sharp,mac-bgr;
|
||||
|
||||
sharp,en-gpios =
|
||||
<&gpio0 26 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 27 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
saif0: saif@80042000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
saif1: saif@80046000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&saif1_pins_a>;
|
||||
fsl,saif-master = <&saif0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
lradc@80050000 {
|
||||
status = "okay";
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
fsl,ave-ctrl = <4>;
|
||||
fsl,ave-delay = <2>;
|
||||
fsl,settling = <10>;
|
||||
};
|
||||
|
||||
i2c0: i2c@80058000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
sgtl5000: codec@a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0x0a>;
|
||||
#sound-dai-cells = <0>;
|
||||
VDDA-supply = <®_3p3v>;
|
||||
VDDIO-supply = <®_3p3v>;
|
||||
clocks = <&saif0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1: i2c@8005a000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_backlight>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
duart: serial@80074000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&duart_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy0: usbphy@8007c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy1: usbphy@8007e000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
usb0: usb@80080000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_id_pins_a>;
|
||||
vbus-supply = <®_usb0_vbus>;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "fsl,imx28-evk-sgtl5000",
|
||||
"fsl,mxs-audio-sgtl5000";
|
||||
model = "imx28-evk-sgtl5000";
|
||||
saif-controllers = <&saif0 &saif1>;
|
||||
audio-codec = <&sgtl5000>;
|
||||
};
|
||||
|
||||
backlight_display: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 50000>, <&pwm 1 50000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <4>; //Set 4 for identification on probing
|
||||
};
|
||||
compatible = "sharp,pw-sh1", "sharp,brain", "fsl,imx28";
|
||||
};
|
||||
|
||||
&brainlcd {
|
||||
status = "okay";
|
||||
|
||||
sharp,lcd-width = <800>;
|
||||
sharp,lcd-height = <480>;
|
||||
|
||||
sharp,mac-transpose;
|
||||
sharp,mac-inversion;
|
||||
sharp,mac-bgr;
|
||||
|
||||
sharp,en-gpios =
|
||||
<&gpio0 26 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 27 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
@ -0,0 +1,27 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// Copyright 2012 Freescale Semiconductor, Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28-brain.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SHARP Brain PW-SH2";
|
||||
compatible = "sharp,pw-sh2", "sharp,brain", "fsl,imx28";
|
||||
};
|
||||
|
||||
&brainlcd {
|
||||
status = "okay";
|
||||
|
||||
sharp,lcd-width = <800>;
|
||||
sharp,lcd-height = <480>;
|
||||
|
||||
sharp,mac-transpose;
|
||||
sharp,mac-inversion;
|
||||
sharp,mac-bgr;
|
||||
|
||||
sharp,en-gpios =
|
||||
<&gpio0 26 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 27 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
|
@ -0,0 +1,28 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// Copyright 2012 Freescale Semiconductor, Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28-brain.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SHARP Brain PW-SH3";
|
||||
compatible = "sharp,pw-sh3", "sharp,brain", "fsl,imx28";
|
||||
};
|
||||
|
||||
&brainlcd {
|
||||
status = "okay";
|
||||
|
||||
sharp,lcd-width = <854>;
|
||||
sharp,lcd-height = <480>;
|
||||
sharp,lcd-width-mm = <112>;
|
||||
sharp,lcd-height-mm = <67>;
|
||||
|
||||
sharp,mac-flip-y-gs;
|
||||
sharp,mac-transpose;
|
||||
|
||||
sharp,en-gpios =
|
||||
<&gpio0 26 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 27 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
|
@ -0,0 +1,28 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// Copyright 2012 Freescale Semiconductor, Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28-brain.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SHARP Brain PW-SH4";
|
||||
compatible = "sharp,pw-sh4", "sharp,brain", "fsl,imx28";
|
||||
};
|
||||
|
||||
&brainlcd {
|
||||
status = "okay";
|
||||
|
||||
sharp,lcd-width = <854>;
|
||||
sharp,lcd-height = <480>;
|
||||
sharp,lcd-width-mm = <112>;
|
||||
sharp,lcd-height-mm = <67>;
|
||||
|
||||
sharp,mac-flip-y-gs;
|
||||
sharp,mac-transpose;
|
||||
|
||||
sharp,en-gpios =
|
||||
<&gpio0 26 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 27 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
|
@ -0,0 +1,28 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// Copyright 2012 Freescale Semiconductor, Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28-brain.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SHARP Brain PW-SH6";
|
||||
compatible = "sharp,pw-sh6", "sharp,brain", "fsl,imx28";
|
||||
};
|
||||
|
||||
&brainlcd {
|
||||
status = "okay";
|
||||
|
||||
sharp,lcd-width = <854>;
|
||||
sharp,lcd-height = <480>;
|
||||
sharp,lcd-width-mm = <112>;
|
||||
sharp,lcd-height-mm = <67>;
|
||||
|
||||
sharp,mac-flip-y-gs;
|
||||
sharp,mac-transpose;
|
||||
|
||||
sharp,en-gpios =
|
||||
<&gpio0 26 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 27 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
|
@ -0,0 +1,28 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// Copyright 2012 Freescale Semiconductor, Inc.
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx28-brain.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SHARP Brain PW-SH3";
|
||||
compatible = "sharp,pw-sh3", "sharp,brain", "fsl,imx28";
|
||||
};
|
||||
|
||||
&brainlcd {
|
||||
status = "okay";
|
||||
|
||||
sharp,lcd-width = <854>;
|
||||
sharp,lcd-height = <480>;
|
||||
sharp,lcd-width-mm = <112>;
|
||||
sharp,lcd-height-mm = <67>;
|
||||
|
||||
sharp,mac-flip-y-gs;
|
||||
sharp,mac-transpose;
|
||||
|
||||
sharp,en-gpios =
|
||||
<&gpio0 26 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio0 27 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
Loading…
Reference in New Issue