dt-bindings: new binding for Ilitek ILI9341 display panels

This adds a new binding for Ilitek ILI9341 display panels. It includes
a compatible string for one display (more can be added in the future).

The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout
board[2] and in Mindsensors' PiStorms[3].

The vendor prefix "adafruit" is used because the actual vendor is not
known, but Adafruit is the most common source for a product that
contains this panel.

[1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf
[2]: https://www.adafruit.com/product/2478
[3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robot

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-4-david@lechnology.com
This commit is contained in:
David Lechner 2018-05-25 14:36:22 -05:00
parent bb2a9b6eb1
commit 7b59d2d8d7

View File

@ -0,0 +1,27 @@
Ilitek ILI9341 display panels
This binding is for display panels using an Ilitek ILI9341 controller in SPI
mode.
Required properties:
- compatible: "adafruit,yx240qv29", "ilitek,ili9341"
- dc-gpios: D/C pin
- reset-gpios: Reset pin
The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in ../spi/spi-bus.txt must be specified.
Optional properties:
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
- backlight: phandle of the backlight device attached to the panel
Example:
display@0{
compatible = "adafruit,yx240qv29", "ilitek,ili9341";
reg = <0>;
spi-max-frequency = <32000000>;
dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
rotation = <270>;
backlight = <&backlight>;
};