Bluetooth: btrtl: HCI reset on close for Realtek BT chip

Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly
after on-off several times. Bluetooth daemon sets BT mode failed when
this issue happens. Scanning must be active while turning off for this
bug to be hit.

bluetoothd[1576]: Failed to set mode: Failed (0x03)

If BT is turned off, then turned on again, it works correctly again.

According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set
during probing. So, this patch makes Realtek's BT reset on close to fix
this issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit is contained in:
Jian-Hong Pan 2019-06-25 16:30:51 +08:00 committed by Marcel Holtmann
parent 6322f377bc
commit 7af3f558ac
3 changed files with 27 additions and 0 deletions

View File

@ -637,6 +637,26 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
}
EXPORT_SYMBOL_GPL(btrtl_setup_realtek);
int btrtl_shutdown_realtek(struct hci_dev *hdev)
{
struct sk_buff *skb;
int ret;
/* According to the vendor driver, BT must be reset on close to avoid
* firmware crash.
*/
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
bt_dev_err(hdev, "HCI reset during shutdown failed");
return ret;
}
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(btrtl_shutdown_realtek);
static unsigned int btrtl_convert_baudrate(u32 device_baudrate)
{
switch (device_baudrate) {

View File

@ -55,6 +55,7 @@ void btrtl_free(struct btrtl_device_info *btrtl_dev);
int btrtl_download_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev);
int btrtl_setup_realtek(struct hci_dev *hdev);
int btrtl_shutdown_realtek(struct hci_dev *hdev);
int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
@ -83,6 +84,11 @@ static inline int btrtl_setup_realtek(struct hci_dev *hdev)
return -EOPNOTSUPP;
}
static inline int btrtl_shutdown_realtek(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
}
static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,

View File

@ -3184,6 +3184,7 @@ static int btusb_probe(struct usb_interface *intf,
#ifdef CONFIG_BT_HCIBTUSB_RTL
if (id->driver_info & BTUSB_REALTEK) {
hdev->setup = btrtl_setup_realtek;
hdev->shutdown = btrtl_shutdown_realtek;
/* Realtek devices lose their updated firmware over suspend,
* but the USB hub doesn't notice any status change.